Download or read book HEMT Technology and Applications written by Trupti Ranjan Lenka and published by Springer Nature. This book was released on 2022-06-23 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers two broad domains: state-of-the-art research in GaN HEMT and Ga2O3 HEMT. Each technology covers materials system, band engineering, modeling and simulations, fabrication techniques, and emerging applications. The book presents basic operation principles of HEMT, types of HEMT structures, and semiconductor device physics to understand the device behavior. The book presents numerical modeling of the device and TCAD simulations for high-frequency and high-power applications. The chapters include device characteristics of HEMT including 2DEG density, Id-Vgs, Id-Vds, transconductance, linearity, and C-V. The book emphasizes the state-of-the-art fabrication techniques of HEMT and circuit design for various applications in low noise amplifier, oscillator, power electronics, and biosensor applications. The book focuses on HEMT applications to meet the ever-increasing demands of the industry, innovation in terms of materials, design, modeling, simulation, processes, and circuits. The book will be primarily helpful to undergraduate/postgraduate, researchers, and practitioners in their research.
Download or read book Materials for High Temperature Semiconductor Devices written by National Research Council and published by National Academies Press. This book was released on 1995-09-14 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: Major benefits to system architecture would result if cooling systems for components could be eliminated without compromising performance. This book surveys the state-of-the-art for the three major wide bandgap materials (silicon carbide, nitrides, and diamond), assesses the national and international efforts to develop these materials, identifies the technical barriers to their development and manufacture, determines the criteria for successfully packaging and integrating these devices into existing systems, and recommends future research priorities.
Download or read book Advanced SPICE Model for GaN HEMTs ASM HEMT written by Sourabh Khandelwal and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses in detail the Advanced SPICE Model for GaN HEMTs (ASM-HEMT), a new industry standard model for GaN-based power and RF circuit design. The author describes this new, standard model in detail, covering the different components of the ASM GaN model from fundamental derivations to the implementation in circuit simulation tools. The book also includes a detailed description of parameter extraction steps and model quality tests, which are critically important for effective use of this standard model in circuit simulation and product design. Coverage includes both radio-frequency (RF), and power electronics applications of this model. Practical issues related to measurement data and parameter extraction flow are also discussed, enabling readers easily to adopt this new model for design flow and simulation tools. Describes in detail a new industry standard for GaN-based power and RF circuit design; Includes discussion of practical problems and their solutions in GaN device modeling; Covers both radio-frequency (RF) and power electronics application of GaN technology; Describes modeling of both GaN RF and power devices.
Download or read book Proceedings of 17th Nordic Semiconductor Meeting written by Koung-An Chao and published by . This book was released on 1997 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book GaN Transistors for Efficient Power Conversion written by Alex Lidow and published by John Wiley & Sons. This book was released on 2019-08-12 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: An up-to-date, practical guide on upgrading from silicon to GaN, and how to use GaN transistors in power conversion systems design This updated, third edition of a popular book on GaN transistors for efficient power conversion has been substantially expanded to keep students and practicing power conversion engineers ahead of the learning curve in GaN technology advancements. Acknowledging that GaN transistors are not one-to-one replacements for the current MOSFET technology, this book serves as a practical guide for understanding basic GaN transistor construction, characteristics, and applications. Included are discussions on the fundamental physics of these power semiconductors, layout, and other circuit design considerations, as well as specific application examples demonstrating design techniques when employing GaN devices. GaN Transistors for Efficient Power Conversion, 3rd Edition brings key updates to the chapters of Driving GaN Transistors; Modeling, Simulation, and Measurement of GaN Transistors; DC-DC Power Conversion; Envelope Tracking; and Highly Resonant Wireless Energy Transfer. It also offers new chapters on Thermal Management, Multilevel Converters, and Lidar, and revises many others throughout. Written by leaders in the power semiconductor field and industry pioneers in GaN power transistor technology and applications Updated with 35% new material, including three new chapters on Thermal Management, Multilevel Converters, Wireless Power, and Lidar Features practical guidance on formulating specific circuit designs when constructing power conversion systems using GaN transistors A valuable resource for professional engineers, systems designers, and electrical engineering students who need to fully understand the state-of-the-art GaN Transistors for Efficient Power Conversion, 3rd Edition is an essential learning tool and reference guide that enables power conversion engineers to design energy-efficient, smaller, and more cost-effective products using GaN transistors.
Download or read book Compact Modeling written by Gennady Gildenblat and published by Springer Science & Business Media. This book was released on 2010-06-22 with total page 531 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most of the recent texts on compact modeling are limited to a particular class of semiconductor devices and do not provide comprehensive coverage of the field. Having a single comprehensive reference for the compact models of most commonly used semiconductor devices (both active and passive) represents a significant advantage for the reader. Indeed, several kinds of semiconductor devices are routinely encountered in a single IC design or in a single modeling support group. Compact Modeling includes mostly the material that after several years of IC design applications has been found both theoretically sound and practically significant. Assigning the individual chapters to the groups responsible for the definitive work on the subject assures the highest possible degree of expertise on each of the covered models.
Download or read book Solid State Technology written by and published by . This book was released on 1972 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Power GaN Devices written by Matteo Meneghini and published by Springer. This book was released on 2016-09-08 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the first comprehensive overview of the properties and fabrication methods of GaN-based power transistors, with contributions from the most active research groups in the field. It describes how gallium nitride has emerged as an excellent material for the fabrication of power transistors; thanks to the high energy gap, high breakdown field, and saturation velocity of GaN, these devices can reach breakdown voltages beyond the kV range, and very high switching frequencies, thus being suitable for application in power conversion systems. Based on GaN, switching-mode power converters with efficiency in excess of 99 % have been already demonstrated, thus clearing the way for massive adoption of GaN transistors in the power conversion market. This is expected to have important advantages at both the environmental and economic level, since power conversion losses account for 10 % of global electricity consumption. The first part of the book describes the properties and advantages of gallium nitride compared to conventional semiconductor materials. The second part of the book describes the techniques used for device fabrication, and the methods for GaN-on-Silicon mass production. Specific attention is paid to the three most advanced device structures: lateral transistors, vertical power devices, and nanowire-based HEMTs. Other relevant topics covered by the book are the strategies for normally-off operation, and the problems related to device reliability. The last chapter reviews the switching characteristics of GaN HEMTs based on a systems level approach. This book is a unique reference for people working in the materials, device and power electronics fields; it provides interdisciplinary information on material growth, device fabrication, reliability issues and circuit-level switching investigation.
Download or read book Japanese Journal of Applied Physics written by and published by . This book was released on 2004 with total page 1430 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physics Briefs written by and published by . This book was released on 1992 with total page 1406 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book JJAP written by and published by . This book was released on 2004 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book MOSFET Models for SPICE Simulation written by William Liu and published by Wiley-IEEE Press. This book was released on 2001-02-21 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: An expert guide to understanding and making optimum use of BSIM Used by more chip designers worldwide than any other comparable model, the Berkeley Short-Channel IGFET Model (BSIM) has, over the past few years, established itself as the de facto standard MOSFET SPICE model for circuit simulation and CMOS technology development. Yet, until now, there have been no independent expert guides or tutorials to supplement the various BSIM manuals currently available. Written by a noted expert in the field, this book fills that gap in the literature by providing a comprehensive guide to understanding and making optimal use of BSIM3 and BSIM4. Drawing upon his extensive experience designing with BSIM, William Liu provides a brief history of the model, discusses the various advantages of BSIM over other models, and explores the reasons why BSIM3 has been adopted by the majority of circuit manufacturers. He then provides engineers with the detailed practical information and guidance they need to master all of BSIM's features. He: Summarizes key BSIM3 components Represents the BSIM3 model with equivalent circuits for various operating conditions Provides a comprehensive glossary of modeling terminology Lists alphabetically BSIM3 parameters along with their meanings and relevant equations Explores BSIM3's flaws and provides improvement suggestions Describes all of BSIM4's improvements and new features Provides useful SPICE files, which are available online at the Wiley ftp site
Download or read book Power Transistors written by B. Jayant Baliga and published by Institute of Electrical & Electronics Engineers(IEEE). This book was released on 1984 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Breakdown Phenomena in Semiconductors and Semiconductor Devices written by Michael Levinshtein and published by World Scientific. This book was released on 2005 with total page 223 pages. Available in PDF, EPUB and Kindle. Book excerpt: Impact ionization, avalanche and breakdown phenomena form the basis of many very interesting and important semiconductor devices, such as avalanche photodiodes, avalanche transistors, suppressors, sharpening diodes (diodes with delayed breakdown), as well as IMPATT and TRAPATT diodes. In order to provide maximal speed and power, many semiconductor devices must operate under or very close to breakdown conditions. Consequently, an acquaintance with breakdown phenomena is essential for scientists or engineers dealing with semiconductor devices.The aim of this book is to summarize the main experimental results on avalanche and breakdown phenomena in semiconductors and semiconductor devices and to analyze their features from a unified point of view. Attention is focused on the phenomenology of avalanche multiplication and the various kinds of breakdown phenomena and their qualitative analysis.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1986 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Distributed Power Amplifiers for RF and Microwave Communications written by Narendra Kumar and published by Artech House. This book was released on 2015-06-01 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new resource presents readers with all relevant information and comprehensive design methodology of wideband amplifiers. This book specifically focuses on distributed amplifiers and their main components, and presents numerous RF and microwave applications including well-known historical and recent architectures, theoretical approaches, circuit simulation, and practical implementation techniques. A great resource for practicing designers and engineers, this book contains numerous well-known and novel practical circuits, architectures, and theoretical approaches with detailed description of their operational principles.
