Download or read book Analytical Investigation of the Hygrothermal Effects and Parametric Study of the Edge Crack Torsion ECT Mode 3 Test Lay ups written by Jian Li and published by . This book was released on 1995 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: A shear deformation theory including residual thermal and moisture effects is developed for the analysis of either symmetric or unsymmetric laminates with mid-plane edge delamination under torsion loading. The theory is based on an assumed displacement field which includes shear deformation. The governing equations and boundary conditions are obtained from the principle of virtual work. The analysis of the (90/(+/- 45)(n)/( -/+ 45)(n)/90)(s) ECT mode 3 test lay-up indicates that there are no hygrothermal effects on the mode 3 strain energy release rate because the laminate, and both sublaminates above and below the delamination, are symmetric lay-ups. A further parametric study reveals that some other lay-ups can have negligible hygrothermal effects even when the sublaminates above and below the delamination are not symmetric about their own mid-planes. However, these lay-ups may suffer from distortion after the curing process. Another Interesting set of lay-ups investigated is a class of antisymmetric laminates with (+/-(theta/(theta -90)(2)/theta))(n) lay-ups. It is observed that when n takes on even numbers (2 and 4), both hygrothermal and mode 1 effects can be neglected. From this point of view, these lay-ups provide a way to determine the mode 3 toughness between two dissimilar layers. However, when n takes on odd numbers (1 and 3), both hygrothermal and mode 1 effects may be strong in these lay-ups. In particular, when theta equals 45 deg, the lay-ups are free from both hygrothermal and mode 1 effects irrespective of n.
Download or read book Evaluation of the Edge Crack Torsion ECT Test for Mode 3 Interlaminar Fracture Toughness of Laminated Composites written by and published by . This book was released on 1996 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book American Society for Composites American Society for Testing And Materials Committee D30 written by Erian Armanios and published by DEStech Publications, Inc. This book was released on 2004-10 with total page 1464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Highlights the recent developments in the fundamental understanding of composites; important information for researchers and composite scientists.
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1995 with total page 906 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Composite Materials written by Erian A. Armanios and published by ASTM International. This book was released on 1997 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Technical Memorandum written by and published by . This book was released on 1996 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Langley Scientific and Technical Information Output 1995 written by and published by . This book was released on 1996 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: This document is a compilation of the scientific and technical information that the Langley Research Center has produced during the calendar year 1995. Included are citations for formal reports, high-numbered conference publications, high-numbered technical memorandums, contractor reports, journal articles and other publications, meeting presentations, technical talks, computer programs, tech briefs, and patents.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1997 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Langley Scientific and Technical Information Output 1997 written by and published by . This book was released on 1998 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Virtual Crack Closure Technique History Approach and Applications written by Ronald Krueger and published by . This book was released on 2002 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: An overview of the virtual crack closure technique is presented. The approach used is discussed, the history summarized, and insight into its applications provided. Equations for two-dimensional quadrilateral elements with linear and quadratic shape functions are given. Formula for applying the technique in conjuction with three-dimensional solid elements as well as plate/shell elements are also provided. Necessary modifications for the use of the method with geometrically nonlinear finite element analysis and corrections required for elements at the crack tip with different lengths and widths are discussed. The problems associated with cracks or delaminations propagating between different materials are mentioned briefly, as well as a strategy to minimize these problems. Due to an increased interest in using a fracture mechanics based approach to assess the damage tolerance of composite structures in the design phase and during certification, the engineering problems selected as examples and given as references focus on the application of the technique to components made of composite materials.
Download or read book Practical Analysis of Aircraft Composites written by Brian Esp and published by . This book was released on 2017-10-28 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Mechanics of Composite Materials written by Isaac M. Daniel and published by . This book was released on 2007 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanics of Composite Materials and Structures written by Carlos A. Mota Soares and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: A compact presentation of the foundations, current state of the art, recent developments and research directions of all essential techniques related to the mechanics of composite materials and structures. Special emphasis is placed on classic and recently developed theories of composite laminated beams, plates and shells, micromechanics, impact and damage analysis, mechanics of textile structural composites, high strain rate testing and non-destructive testing of composite materials and structures. Topics of growing importance are addressed, such as: numerical methods and optimisation, identification and damage monitoring. The latest results are presented on the art of modelling smart composites, optimal design with advanced materials, and industrial applications. Each section of the book is written by internationally recognised experts who have dedicated most of their research work to a particular field. Readership: Postgraduate students, researchers and engineers in the field of composites. Undergraduate students will benefit from the treatment of the foundations of the mechanics of composite materials and structures.
Download or read book The Behavior of Sandwich Structures of Isotropic and Composite Materials written by JackR. Vinson and published by Routledge. This book was released on 2018-05-04 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Behavior of Sandwich Structures of Isotropic and Composite Materials presents the mathematics, descriptions, and analytical techniques in the growing field of sandwich structures. From a background in sandwich structures to thermoelastic problems of sandwich structures and sandwich shell theory, the book provides the knowledge needed to analyze, design, and optimize various sandwich structures. As one would expect from a book on sandwich structures, this volume discusses special failure modes such as face wrinkling and core shear instability. Coverage includes not only honeycomb cores, but also foam, web, and truss cores. An important topic in composite structure design, optimization is explored in two chapters on sandwich plates and sandwich shells. The author presents the optimization techniques in closed form and the methods are applicable to material selection and geometric design. The book also contains a set of problems and references at the end of each chapter. This text is ideal for engineers-in-training, as well as practical engineers who desire a comprehensive understanding of sandwich structures technology.
Download or read book Structural Composite Materials written by F. C. Campbell and published by ASM International. This book was released on 2010-01-01 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with all aspects of advanced composite materials; what they are, where they are used, how they are made, their properties, how they are designed and analyzed, and how they perform in-service. It covers both continuous and discontinuous fiber composites fabricated from polymer, metal, and ceramic matrices, with an emphasis on continuous fiber polymer matrix composites.
Download or read book Composite Materials written by Krishan K. Chawla and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on the relationship between structure and properties, this is a well-balanced treatment of the mechanics and the materials science of composites, while not neglecting the importance of processing. This updated second edition contains new chapters on fatigue and creep of composites, and describes in detail how the various reinforcements, the materials in which they are embedded, and of the interfaces between them, control the properties of the composite materials at both the micro- and macro-levels. Extensive use is made of micrographs and line drawings, and examples of practical applications in various fields are given throughout the book, together with extensive references to the literature. Intended for use in graduate and upper-division undergraduate courses, this book will also prove a useful reference for practising engineers and researchers in industry and academia.