Download or read book Analysis of Three dimensional cavity backed Aperture Antennas Using a Combined Finite Element Method Method of Moments Geometrical Theory of Diffraction Technique written by C. J. Reddy and published by . This book was released on 1995 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fractal Apertures in Waveguides Conducting Screens and Cavities written by Basudeb Ghosh and published by Springer. This book was released on 2014-06-12 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the design and analysis of fractal apertures in waveguides, conducting screens and cavities using numerical electromagnetics and field-solvers. The aim is to obtain design solutions with improved accuracy for a wide range of applications. To achieve this goal, a few diverse problems are considered. The book is organized with adequate space dedicated for the design and analysis of fractal apertures in waveguides, conducting screens and cavities, microwave/millimeter wave applications followed by detailed case-study problems to infuse better insight and understanding of the subject. Finally, summaries and suggestions are given for future work. Fractal geometries were widely used in electromagnetics, specifically for antennas and frequency selective surfaces (FSS). The self-similarity of fractal geometry gives rise to a multiband response, whereas the space-filling nature of the fractal geometries makes it an efficient element in antenna and FSS unit cell miniaturization. Until now, no efforts were made to study the behavior of these fractal geometries for aperture coupling problems. The aperture coupling problem is an important boundary value problem in electromagnetics and used in waveguide filters and power dividers, slotted ground planes, frequency selective surfaces and metamaterials. The present book is intended to initiate a study of the characteristics of fractal apertures in waveguides, conducting screens and cavities. To perform a unified analysis of these entirely dissimilar problems, the “generalized network formulation of the aperture problems” by Mautz and Harrington was extended to multiple-aperture geometry. The authors consider the problem of coupling between two arbitrary regions coupled together via multiple apertures of arbitrary shape. MATLAB codes were developed for the problems and validated with the results available in the literature as well as through simulations on ANSOFT's HFSS.
Download or read book Finite Element Method Electromagnetics written by John L. Volakis and published by John Wiley & Sons. This book was released on 1998-06-15 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Employed in a large number of commercial electromagnetic simulation packages, the finite element method is one of the most popular and well-established numerical techniques in engineering. This book covers the theory, development, implementation, and application of the finite element method and its hybrid versions to electromagnetics. FINITE ELEMENT METHOD FOR ELECTROMAGNETICS begins with a step-by-step textbook presentation of the finite method and its variations then goes on to provide up-to-date coverage of three dimensional formulations and modern applications to open and closed domain problems. Worked out examples are included to aid the reader with the fine features of the method and the implementation of its hybridization with other techniques for a robust simulation of large scale radiation and scattering. The crucial treatment of local boundary conditions is carefully worked out in several stages in the book. Sponsored by: IEEE Antennas and Propagation Society.
Download or read book Computational Electromagnetics and Its Applications written by Thomas G. Campbell and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the first ICASE/LaRC Work shop on Computational Electromagnetics and Its Applications conducted by the Institute for Computer Applications in Science and Engineering and NASA Langley Research Center. We had several goals in mind when we decided, jointly with the Elec tromagnetics Research Branch, to organize this workshop on Computa tional Electromagnetics ( CEM). Among our goals were a desire to obtain an overview of the current state of CEM, covering both algorithms and ap plications and their effect on NASA's activities in this area. In addition, we wanted to provide an attractive setting for computational scientists with expertise in other fields, especially computational fluid dynamics (CFD), to observe the algorithms and tools of CEM at work. Our expectation was that scientists from both fields would discover mutually beneficial inter connections and relationships. Another goal was to learn of progress in solution algorithms for electromagnetic optimization and design problems; such problems make extensive use of field solvers and computational effi ciency is at a premium. To achieve these goals we assembled the renowned group of speakers from academia and industry whose talks are contained in this volume. The papers are printed in the same order in which the talks were pre sented at the meeting. The first paper is an overview of work currently being performed in the Electromagnetic Research Branch at the Langley Research Center.
Download or read book Finite Element Analysis of Antennas and Arrays written by Jian-Ming Jin and published by John Wiley & Sons. This book was released on 2009-02-23 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Most Complete, Up-to-Date Coverage of the Finite Element Analysis and Modeling of Antennas and Arrays Aimed at researchers as well as practical engineers—and packed with over 200 illustrations including twenty-two color plates—Finite Element Analysis of Antennas and Arrays presents: Time- and frequency-domain formulations and mesh truncation techniques Antenna source modeling and parameter calculation Modeling of complex materials and fine geometrical details Analysis and modeling of narrowband and broadband antennas Analysis and modeling of infinite and finite phased-array antennas Analysis and modeling of antenna and platform interactions Recognizing the strengths of other numerical methods, this book goes beyond the finite element method and covers hybrid techniques that combine the finite element method with the finite difference time-domain method, the method of moments, and the high-frequency asymptotic methods to efficiently deal with a variety of complex antenna problems. Complemented with numerous examples, this cutting-edge resource fully demonstrates the power and capabilities of the finite element analysis and its many practical applications.
Download or read book Analysis of Three Dimensional Cavity Backed Aperture Antennas Using a Combined Finite Element Method Method of Moments Geometrical Theory of Diffraction Technique written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-30 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: A combined finite element method (FEM) and method of moments (MoM) technique is presented to analyze the radiation characteristics of a cavity-fed aperture in three dimensions. Generalized feed modeling has been done using the modal expansion of fields in the feed structure. Numerical results for some feeding structures such as a rectangular waveguide, circular waveguide, and coaxial line are presented. The method also uses the geometrical theory of diffraction (GTD) to predict the effect of a finite ground plane on radiation characteristics. Input admittance calculations for open radiating structures such as a rectangular waveguide, a circular waveguide, and a coaxial line are shown. Numerical data for a coaxial-fed cavity with finite ground plane are verified with experimental data. Reddy, C. J. and Deshpande, M. D. and Cockrell, C. R. and Beck, F. B. Langley Research Center RTOP 505-64-70-01...
Download or read book Analysis of Three Dimensional Cavity Backed Aperture Antennas Using a Combined Finite Element Method Method of Moments Geometrical Theory of Diffracti written by National Aeronautics and Space Adm Nasa and published by Independently Published. This book was released on 2018-10-25 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: A combined finite element method (FEM) and method of moments (MoM) technique is presented to analyze the radiation characteristics of a cavity-fed aperture in three dimensions. Generalized feed modeling has been done using the modal expansion of fields in the feed structure. Numerical results for some feeding structures such as a rectangular waveguide, circular waveguide, and coaxial line are presented. The method also uses the geometrical theory of diffraction (GTD) to predict the effect of a finite ground plane on radiation characteristics. Input admittance calculations for open radiating structures such as a rectangular waveguide, a circular waveguide, and a coaxial line are shown. Numerical data for a coaxial-fed cavity with finite ground plane are verified with experimental data. Reddy, C. J. and Deshpande, M. D. and Cockrell, C. R. and Beck, F. B. Langley Research Center RTOP 505-64-70-01...
Download or read book A Combined FEM MoM GTD Technique To Analyze Elliptically Polarized Cavity Backed Antennas With Finite Ground Plane written by and published by . This book was released on 1996 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book MATLAB based Finite Element Programming in Electromagnetic Modeling written by Özlem Özgün and published by CRC Press. This book was released on 2018-09-03 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a self-contained, programming-oriented and learner-centered book on finite element method (FEM), with special emphasis given to developing MATLAB® programs for numerical modeling of electromagnetic boundary value problems. It provides a deep understanding and intuition of FEM programming by means of step-by-step MATLAB® programs with detailed descriptions, and eventually enabling the readers to modify, adapt and apply the provided programs and formulations to develop FEM codes for similar problems through various exercises. It starts with simple one-dimensional static and time-harmonic problems and extends the developed theory to more complex two- or three-dimensional problems. It supplies sufficient theoretical background on the topic, and it thoroughly covers all phases (pre-processing, main body and post-processing) in FEM. FEM formulations are obtained for boundary value problems governed by a partial differential equation that is expressed in terms of a generic unknown function, and then, these formulations are specialized to various electromagnetic applications together with a post-processing phase. Since the method is mostly described in a general context, readers from other disciplines can also use this book and easily adapt the provided codes to their engineering problems. After forming a solid background on the fundamentals of FEM by means of canonical problems, readers are guided to more advanced applications of FEM in electromagnetics through a survey chapter at the end of the book. Offers a self-contained and easy-to-understand introduction to the theory and programming of finite element method. Covers various applications in the field of static and time-harmonic electromagnetics. Includes one-, two- and three-dimensional finite element codes in MATLAB®. Enables readers to develop finite element programming skills through various MATLAB® codes and exercises. Promotes self-directed learning skills and provides an effective instruction tool.
Download or read book NASA Technical Memorandum written by and published by . This book was released on 1996 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Finite Element Method in Electromagnetics written by Jian-Ming Jin and published by John Wiley & Sons. This book was released on 2015-02-18 with total page 728 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new edition of the leading textbook on the finite element method, incorporating major advancements and further applications in the field of electromagnetics The finite element method (FEM) is a powerful simulation technique used to solve boundary-value problems in a variety of engineering circumstances. It has been widely used for analysis of electromagnetic fields in antennas, radar scattering, RF and microwave engineering, high-speed/high-frequency circuits, wireless communication, electromagnetic compatibility, photonics, remote sensing, biomedical engineering, and space exploration. The Finite Element Method in Electromagnetics, Third Edition explains the method’s processes and techniques in careful, meticulous prose and covers not only essential finite element method theory, but also its latest developments and applications—giving engineers a methodical way to quickly master this very powerful numerical technique for solving practical, often complicated, electromagnetic problems. Featuring over thirty percent new material, the third edition of this essential and comprehensive text now includes: A wider range of applications, including antennas, phased arrays, electric machines, high-frequency circuits, and crystal photonics The finite element analysis of wave propagation, scattering, and radiation in periodic structures The time-domain finite element method for analysis of wideband antennas and transient electromagnetic phenomena Novel domain decomposition techniques for parallel computation and efficient simulation of large-scale problems, such as phased-array antennas and photonic crystals Along with a great many examples, The Finite Element Method in Electromagnetics is an ideal book for engineering students as well as for professionals in the field.
Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 1996-07 with total page 1000 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Information Technologies for Electromagnetics written by Luciano Tarricone and published by Springer Science & Business Media. This book was released on 2022-07-18 with total page 473 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a broad panorama on recently achieved and potentially obtainable advances in electromagnetics with innovative IT technologies. Simple tutorial chapters introduce cutting edge technologies. These include parallel and distributed computing, object-oriented technologies, grid computing, semantic grids, agent based computing and service-oriented architectures. The book is a unique tool bridging the gap between IT and EM communities.
Download or read book Frequency Response Calculations of Input Characteristics of Cavity Backed Aperture Antennas Using AWE with Hybrid FEM MoM Technique written by C. J. Reddy and published by . This book was released on 1997 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book User s Manual for FEMOM3DR written by and published by . This book was released on 1998 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Radio Science written by and published by . This book was released on 1996 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt:
