Download or read book Analysis of the Electrochemical Characteristics of a Direct Methanol Fuel Cell Based on a Pt Ru C Anode Catalyst written by and published by . This book was released on 1996 with total page 4 pages. Available in PDF, EPUB and Kindle. Book excerpt: This paper deals with a vapour-feed direct methanol fuel cell (DMFC) based on a Nafion 117{reg_sign} solid polymer electrolyte. Pt-Ru/C and Pt/C catalysts were employed for methanol oxidation and oxygen reduction, respectively. Structure and surface chemistry of catalysts were investigated by X-ray powder diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). Membrane/electrode assembly (M & E) was prepared by using a {open_quotes}paste process{close_quotes} method. Electrical power densities of about 150 mW cm−2 were obtained at 95° C with Pt loadings of 0.8 and 0.5 mg cm−2 at anode and cathode respectively.
Download or read book Electrocatalysis of Direct Methanol Fuel Cells written by Jiujun Zhang and published by John Wiley & Sons. This book was released on 2009-10-26 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first book to focus on a comprehensive description on DMFC electrocatalysis draws a clear picture of the current status of DMFC technology, especially the advances, challenges and perspectives in the field. Leading researchers from universities, government laboratories and fuel cell industries in North America, Europe and Asia share their knowledge and information on recent advances in the fundamental theories, experimental methodologies and research achievements. In order to help readers better understand the science and technology of the subject, some important and representative figures, tables, photos, and comprehensive lists of reference papers are also included, such that all the information needed on this topic may be easily located. An indispensable source for physical, catalytic, electro- and solid state chemists, as well as materials scientists and chemists in industry.
Download or read book Fuel Cell Engineering written by and published by Academic Press. This book was released on 2012-08-14 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel cells are attractive electrochemical energy converters featuring potentially very high thermodynamic efficiency factors. The focus of this volume of Advances in Chemical Engineering is on quantitative approaches, particularly based on chemical engineering principles, to analyze, control and optimize the steady state and dynamic behavior of low and high temperature fuel cells (PEMFC, DMFC, SOFC) to be applied in mobile and stationary systems. Updates and informs the reader on the latest research findings using original reviews Written by leading industry experts and scholars Reviews and analyzes developments in the field
Download or read book Methanol written by Angelo Basile and published by Elsevier. This book was released on 2017-10-31 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methanol: Science and Engineering provides a comprehensive review of the chemistry, properties, and current and potential uses and applications of methanol. Divided into four parts, the book begins with a detailed account of current production methods and their economics. The second part deals with the applications of methanol, providing useful insights into future applications. Modeling of the various reactor systems is covered in the next section, with final discussions in the book focusing on the economic and environmental impact of this chemical. Users will find this to be a must-have resource for all researchers and engineers studying alternative energy sources. Provides the latest developments on methanol research Reviews methanol production methods and their economics Outlines the use of methanol as an alternative green transportation fuel Includes new technologies and many new applications of methanol
Download or read book Proceedings of the Workshop on Direct Methanol Air Fuel Cells written by Albert R. Landgrebe and published by . This book was released on 1992 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book PEM Fuel Cell Electrocatalysts and Catalyst Layers written by Jiujun Zhang and published by Springer Science & Business Media. This book was released on 2008-08-26 with total page 1147 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proton exchange membrane (PEM) fuel cells are promising clean energy converting devices with high efficiency and low to zero emissions. Such power sources can be used in transportation, stationary, portable and micro power applications. The key components of these fuel cells are catalysts and catalyst layers. “PEM Fuel Cell Electrocatalysts and Catalyst Layers” provides a comprehensive, in-depth survey of the field, presented by internationally renowned fuel cell scientists. The opening chapters introduce the fundamentals of electrochemical theory and fuel cell catalysis. Later chapters investigate the synthesis, characterization, and activity validation of PEM fuel cell catalysts. Further chapters describe in detail the integration of the electrocatalyst/catalyst layers into the fuel cell, and their performance validation. Researchers and engineers in the fuel cell industry will find this book a valuable resource, as will students of electrochemical engineering and catalyst synthesis.
Download or read book Direct Methanol Fuel Cell Technology written by Kingshuk Dutta and published by Elsevier. This book was released on 2020-02-25 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct Methanol Fuel Cell Technology presents the overall progress witnessed in the field of DMFC over the past decade, highlighting the components, materials, functions, properties and features, designs and configurations, operations, modelling, applications, pros and cons, social, political and market penetration, economics and future directions. The book discusses every single aspect of DMFC device technology, the associated advantages and drawbacks of state-of-the-art materials and design, market opportunities and commercialization aspects, and possible future directions of research and development. This book, containing critical analyses and opinions from experts around the world, will garner considerable interest among actual users/scientists/experts. Analyzes developments of membrane electrolytes, electrodes, catalysts, catalyst supports, bipolar plates, gas diffusion layers and flow channels as critical components of direct methanol fuel cells Includes modeling of direct methanol fuel cells to understand their scaling up potentials Discusses commercial aspects of direct methanol fuel cells in terms of market penetration, end application, cost, viability, reliability, social and commercial perception, drawbacks and prospects
Download or read book Nanotechnology in Catalysis Volumes 1 and 2 written by Bing Zhou and published by Springer Science & Business Media. This book was released on 2003-12-31 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is mainly based on the first and second symposia on Nanotechnology in Catalysis held in 2001 and 2002, but it also includes several contributions not presented in the symposia to round out the scope of the subject. The contents are the most up to date developments made by researchers all over the world in the catalysis field in this fascinating nanotechnology era. It reflects some of the frontier areas of nanoscience and nanotechnology in fabricating and characterizing catalysts and carrying out studies to prove their superior selectivity and activity. The field of application of nanotechnology for the development of catalysts for green chemistry is likely to grow rapidly during the next decade. This book hopes to contribute to the evolution of nanotechnology in that direction.
Download or read book Journal of the School of Engineering the University of Tokyo written by and published by . This book was released on 1998 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Effect of Metal Solution Contaminants on the Electro catalyst Activities of Direct Methanol Fuel Cell written by Soghra Jalil Pour Kivi and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Direct methanol fuel cells (DMFCs) are considered a clean source of electrical power for future energy demand, creating a potential to reduce our dependency on fossil fuels. Despite their advantages, including high energy density, efficiency and easy handling and distribution of fuel, the commercialization of DMFCs has suffered from some drawbacks, including methanol crossover and contamination of the system. Metal cation contaminants (such as Ni, Co, etc) introduced through the degradation of fuel cell components (bipolar plate and electro-catalyst layer) can significantly affect the Nafion-membrane properties and overall fuel cell performance. In the current study, a systematic approach is taken to characterize and identify the mechanism of the effect of metal solution contaminants on the activities of electro-catalysts of DMFCs. Cyclic voltammetry and rotating disk electrode (RDE) techniques were utilized in order to characterize the effect of various concentrations (i.e., 2x10-x M (x=1-7)) of six metal solution contaminants (i.e., Co, Ni and Zn with sulfate and nitrate as counter-anions) on the voltammetric properties and electro-catalytic activity of polycrystalline Pt during methanol oxidation reaction (MOR) and oxygen reduction reaction (ORR). The results showed a decrease in the MOR and ORR activities of Pt as the concentration of metal solution increased. The effect of counter-anion on the Pt activity was further investigated. The results showed that a combined effect of counter-anions and metal cations may be responsible for the decrease in the electro-catalytic activity of Pt. The effect of metal solution contaminants on the Nafion-ionomer of anode electro-catalysts was investigated using Nafion-coated Pt electrode. Voltammetric properties and MOR activities of Nafion-coated and bare Pt electrodes in the presence of Ni solution contaminants were characterized using cyclic voltammetry and electrochemical impedance spectroscopy (EIS). The overall results showed a significant negative effect of Ni solution contaminants on the electro-catalytic activity of bare Pt electrode as compared to the Nafion-coated Pt electrode. Based on the results, it appears that Nafion-ionomer film may interact with metal cations (through its sulfonate groups) and repel them away from the Pt active sites, partially inhibiting the negative effect of metal cations on the Pt activity of Nafion-coated Pt electrode. The effect of metal solution contaminants on the carbon-supported platinum nanoparticle (Pt/C) with various Nafion-ionomer distributions and contents (i.e., Nafion-incorporated Pt/C and Nafion-coated Pt/C electrodes) was further investigated. Cyclic voltammetry and EIS techniques were employed to characterize the effect of Ni solution contaminants on the voltammetric properties and MOR activities of Nafion-incorporated and Nafion-coated Pt/C electrodes. The overall results showed a stronger negative effect of Ni solution contaminants on the electro-catalytic activity of Nafion-incorporated Pt/C electrodes as compared to the Nafion-coated Pt/C electrodes. This further confirms previous observations showing the sulfonate groups of Nafion-ionomer film may attract the Ni metal cations, localize them away from the Pt active sites, and subsequently suppress the negative effect of cations on the activity of Nafion-coated Pt/C electrodes.
Download or read book Metallic Nanomaterials written by Kumar Challa and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-11-19 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents latest research results on synthesis and application of metallic nanomaterials. Fabrication techniques, analytic properties, as well as theoretical aspects are discussed. Size- and shape-controlled synthesis of silver, gold, copper, ruthenium, tellurium, selenium and palladium nanoparticles are reviewed. Further topics are the synthesis from microplasma and shape-control for electrocatalytic applications.
Download or read book Alcohols Advances in Research and Application 2012 Edition written by and published by ScholarlyEditions. This book was released on 2012-12-26 with total page 1380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alcohols—Advances in Research and Application: 2012 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Alcohols. The editors have built Alcohols—Advances in Research and Application: 2012 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Alcohols in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Alcohols—Advances in Research and Application: 2012 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Fuel Cell Catalysis written by Andrzej Wieckowski and published by John Wiley & Sons. This book was released on 2009-04-01 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wiley Series on Electrocatalysis and Electrochemistry Fuel Cell Catalysis A Surface Science Approach A Core reference on fuel cell catalysis Fuel cells represent an important alternative energy source and a very active area of research. Fuel Cell Catalysis brings together world leaders in this field, providing a unique combination of state-of-the-art theory and computational and experimental methods. With an emphasis on understanding fuel cell catalysis at the molecular level, this text covers fundamental principles, future challenges, and important current research themes. Fuel Cell Catalysis: Provides a molecular-level description of catalysis for low-temperature polymer-electrolyte membrane fuel cells, including both hydrogen-oxygen cells and direct alcohol cells Examines catalysis issues of both anode and cathode such as oxygen reduction, alcohol oxidation, and CO tolerance Features a timely and forward-looking approach through emphasis on novel aspects such as computation and bio-inspiration Reviews the use and potential of surface-sensitive techniques like vibrational spectroscopy (IR, Raman, nonlinear spectroscopy, laser), scanning tunneling microscopy, X-ray scattering, NMR, electrochemical techniques, and more Reviews the use and potential of such modern computational techniques as DFT, ab initio MD, kinetic Monte Carlo simulations, and more Surveys important trends in reactivity and structure sensitivity, nanoparticles, "dynamic" catalysis, electrocatalysis vs. gas-phase catalysis, new experimental techniques, and nontraditional catalysts This cutting-edge collection offers a core reference for electrochemists, electrocatalysis researchers, surface and physical chemists, chemical and automotive engineers, and researchers in academia, research institutes, and industry.
Download or read book Materials Chemistry written by Klaus Friedrich and published by CRC Press. This book was released on 2016-04-05 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on important aspects of materials chemistry by providing an overview of the theoretical aspects of materials chemistry, by describing the characterization and analysis methods for materials, and by explaining physical transport mechanisms in various materials. Not only does this book summarize the classical theories of materials c
Download or read book Electroanalytical Chemistry written by Allen J. Bard and published by CRC Press. This book was released on 2017-04-07 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is part of a continuing series that provides authoritative reviews on recent developments and applications of well-established techniques in the field of electroanalytical chemistry. Each volume provides the necessary background and starting point for graduate students undertaking related research projects and is of special interest to practicing analytical chemists concerned with electroanalytical techniques. Volume 27 continues this tradition with innovative contributions from internationally respected scientists who highlight new technologies and trends in Protein Biosensing, Bipolar Electrochemistry, and X-ray Absorption Spectroscopy in Electrochemistry.
Download or read book Encyclopedia of Electrochemical Power Sources written by Jürgen Garche and published by Newnes. This book was released on 2013-05-20 with total page 4532 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Encyclopedia of Electrochemical Power Sources is a truly interdisciplinary reference for those working with batteries, fuel cells, electrolyzers, supercapacitors, and photo-electrochemical cells. With a focus on the environmental and economic impact of electrochemical power sources, this five-volume work consolidates coverage of the field and serves as an entry point to the literature for professionals and students alike. Covers the main types of power sources, including their operating principles, systems, materials, and applications Serves as a primary source of information for electrochemists, materials scientists, energy technologists, and engineers Incorporates nearly 350 articles, with timely coverage of such topics as environmental and sustainability considerations
Download or read book Electrocatalysts for Low Temperature Fuel Cells written by Thandavarayan Maiyalagan and published by John Wiley & Sons. This book was released on 2017-05-08 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Meeting the need for a text on solutions to conditions which have so far been a drawback for this important and trend-setting technology, this monograph places special emphasis on novel, alternative catalysts of low temperature fuel cells. Comprehensive in its coverage, the text discusses not only the electrochemical, mechanistic, and material scientific background, but also provides extensive chapters on the design and fabrication of electrocatalysts. A valuable resource aimed at multidisciplinary audiences in the fields of academia and industry.
