Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book CMOS written by R. Jacob Baker and published by John Wiley & Sons. This book was released on 2008 with total page 1074 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition provides an important contemporary view of a wide range of analog/digital circuit blocks, the BSIM model, data converter architectures, and more. The authors develop design techniques for both long- and short-channel CMOS technologies and then compare the two.
Download or read book MOSFET Modeling for Circuit Analysis and Design written by Carlos Galup-Montoro and published by World Scientific. This book was released on 2007 with total page 445 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book dedicated to the next generation of MOSFET models. Addressed to circuit designers with an in-depth treatment that appeals to device specialists, the book presents a fresh view of compact modeling, having completely abandoned the regional modeling approach.Both an overview of the basic physics theory required to build compact MOSFET models and a unified treatment of inversion-charge and surface-potential models are provided. The needs of digital, analog and RF designers as regards the availability of simple equations for circuit designs are taken into account. Compact expressions for hand analysis or for automatic synthesis, valid in all operating regions, are presented throughout the book. All the main expressions for computer simulation used in the new generation compact models are derived.Since designers in advanced technologies are increasingly concerned with fluctuations, the modeling of fluctuations is strongly emphasized. A unified approach for both space (matching) and time (noise) fluctuations is introduced.
Download or read book Electronics Power Electronics Optoelectronics Microwaves Electromagnetics and Radar written by Richard C. Dorf and published by CRC Press. This book was released on 2018-10-03 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt: In two editions spanning more than a decade, The Electrical Engineering Handbook stands as the definitive reference to the multidisciplinary field of electrical engineering. Our knowledge continues to grow, and so does the Handbook. For the third edition, it has expanded into a set of six books carefully focused on a specialized area or field of study. Electronics, Power Electronics, Optoelectronics, Microwaves, Electromagnetics, and Radar represents a concise yet definitive collection of key concepts, models, and equations in these areas, thoughtfully gathered for convenient access. Electronics, Power Electronics, Optoelectronics, Microwaves, Electromagnetics, and Radar delves into the fields of electronics, integrated circuits, power electronics, optoelectronics, electromagnetics, light waves, and radar, supplying all of the basic information required for a deep understanding of each area. It also devotes a section to electrical effects and devices and explores the emerging fields of microlithography and power electronics. Articles include defining terms, references, and sources of further information. Encompassing the work of the world’s foremost experts in their respective specialties, Electronics, Power Electronics, Optoelectronics, Microwaves, Electromagnetics, and Radar features the latest developments, the broadest scope of coverage, and new material in emerging areas.
Download or read book The Electrical Engineering Handbook Six Volume Set written by Richard C. Dorf and published by CRC Press. This book was released on 2018-12-14 with total page 3672 pages. Available in PDF, EPUB and Kindle. Book excerpt: In two editions spanning more than a decade, The Electrical Engineering Handbook stands as the definitive reference to the multidisciplinary field of electrical engineering. Our knowledge continues to grow, and so does the Handbook. For the third edition, it has grown into a set of six books carefully focused on specialized areas or fields of study. Each one represents a concise yet definitive collection of key concepts, models, and equations in its respective domain, thoughtfully gathered for convenient access. Combined, they constitute the most comprehensive, authoritative resource available. Circuits, Signals, and Speech and Image Processing presents all of the basic information related to electric circuits and components, analysis of circuits, the use of the Laplace transform, as well as signal, speech, and image processing using filters and algorithms. It also examines emerging areas such as text to speech synthesis, real-time processing, and embedded signal processing. Electronics, Power Electronics, Optoelectronics, Microwaves, Electromagnetics, and Radar delves into the fields of electronics, integrated circuits, power electronics, optoelectronics, electromagnetics, light waves, and radar, supplying all of the basic information required for a deep understanding of each area. It also devotes a section to electrical effects and devices and explores the emerging fields of microlithography and power electronics. Sensors, Nanoscience, Biomedical Engineering, and Instruments provides thorough coverage of sensors, materials and nanoscience, instruments and measurements, and biomedical systems and devices, including all of the basic information required to thoroughly understand each area. It explores the emerging fields of sensors, nanotechnologies, and biological effects. Broadcasting and Optical Communication Technology explores communications, information theory, and devices, covering all of the basic information needed for a thorough understanding of these areas. It also examines the emerging areas of adaptive estimation and optical communication. Computers, Software Engineering, and Digital Devices examines digital and logical devices, displays, testing, software, and computers, presenting the fundamental concepts needed to ensure a thorough understanding of each field. It treats the emerging fields of programmable logic, hardware description languages, and parallel computing in detail. Systems, Controls, Embedded Systems, Energy, and Machines explores in detail the fields of energy devices, machines, and systems as well as control systems. It provides all of the fundamental concepts needed for thorough, in-depth understanding of each area and devotes special attention to the emerging area of embedded systems. Encompassing the work of the world's foremost experts in their respective specialties, The Electrical Engineering Handbook, Third Edition remains the most convenient, reliable source of information available. This edition features the latest developments, the broadest scope of coverage, and new material on nanotechnologies, fuel cells, embedded systems, and biometrics. The engineering community has relied on the Handbook for more than twelve years, and it will continue to be a platform to launch the next wave of advancements. The Handbook's latest incarnation features a protective slipcase, which helps you stay organized without overwhelming your bookshelf. It is an attractive addition to any collection, and will help keep each volume of the Handbook as fresh as your latest research.
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1985 with total page 924 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microcircuit Reliability Bibliography written by and published by . This book was released on 1974 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cumulative Index to NASA Tech Briefs written by and published by . This book was released on with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NASA Tech Briefs written by and published by . This book was released on 1981 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fuzzy Rule Based Computer Design written by John R. Newport and published by CRC Press. This book was released on 1995-10-09 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the theory and some examples of rule based reasoning applied to computer design. The presentation begins with design methods. These include both structured, object oriented design applied to software and systems engineering using several examples. Rule based reasoning, fuzzy logic, and new methods of virtual prototyping of computer designs are also covered. Virtual prototyping, in contrast to hardware prototyping, offers the promise of much lower design cost and more time to prepare prototypes. A discussion on this topic concludes with a sample implementation of these methods that can be used for computer system design.
Download or read book Design for Maintainability written by Louis J. Gullo and published by John Wiley & Sons. This book was released on 2021-03-26 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: How to design for optimum maintenance capabilities and minimize the repair time Design for Maintainability offers engineers a wide range of tools and techniques for incorporating maintainability into the design process for complex systems. With contributions from noted experts on the topic, the book explains how to design for optimum maintenance capabilities while simultaneously minimizing the time to repair equipment. The book contains a wealth of examples and the most up-to-date maintainability design practices that have proven to result in better system readiness, shorter downtimes, and substantial cost savings over the entire system life cycle, thereby, decreasing the Total Cost of Ownership. Design for Maintainability offers a wealth of design practices not covered in typical engineering books, thus allowing readers to think outside the box when developing maintainability design requirements. The book's principles and practices can help engineers to dramatically improve their ability to compete in global markets and gain widespread customer satisfaction. This important book: Offers a complete overview of maintainability engineering as a system engineering discipline Includes contributions from authors who are recognized leaders in the field Contains real-life design examples, both good and bad, from various industries Presents realistic illustrations of good maintainability design principles Provides discussion of the interrelationships between maintainability with other related disciplines Explores trending topics in technologies Written for design and logistics engineers and managers, Design for Maintainability is a comprehensive resource containing the most reliable and innovative techniques for improving maintainability when designing a system or product.
Download or read book Design of Arithmetic Circuits in Quantum Dot Cellular Automata Nanotechnology written by K. Sridharan and published by Springer. This book was released on 2015-03-26 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: This research monograph focuses on the design of arithmetic circuits in Quantum Dot Cellular Automata (QCA). Using the fact that the 3-input majority gate is a primitive in QCA, the book sets out to discover hitherto unknown properties of majority logic in the context of arithmetic circuit designs. The pursuit for efficient adders in QCA takes two forms. One involves application of the new results in majority logic to existing adders. The second involves development of a custom adder for QCA technology. A QCA adder named as hybrid adder is proposed and it is shown that it outperforms existing multi-bit adders with respect to area and delay. The work is extended to the design of a low-complexity multiplier for signed numbers in QCA. Furthermore the book explores two aspects unique to QCA technology, namely thermal robustness and the role of interconnects. In addition, the book introduces the reader to QCA layout design and simulation using QCADesigner. Features & Benefits: This research-based book: ·Introduces the reader to Quantum Dot Cellular Automata, an emerging nanotechnology. ·Explores properties of majority logic. ·Demonstrates application of the properties to design efficient arithmetic circuits. ·Guides the reader towards layout design and simulation in QCADesigner.
Download or read book Flexible Glass written by Sean M. Garner and published by John Wiley & Sons. This book was released on 2017-08-10 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides the reader how to apply flexible glass applications that are not possible or practical to address with alternative substrate materials. Examples of technology areas include displays, touch sensors, lighting, backplanes, and photovoltaics. Built on more than 10 years of valuable discussions and collaborations focused on truly defining what flexible glass means in the context of the emerging electronic and opto-electronic applications, this book provides a broad overview as well as detailed descriptions that cover flexible glass properties, device fabrication methods, and emerging applications. It provides the basis for identifying new device designs, applications, and manufacturing processes for which flexible glass substrates are uniquely suited and encourages and enables the reader to identify and pursue advanced flexible glass applications that do not exist today and provides a launching point for exciting future directions. The chapters are grouped into three sections. The first focuses on flexible glass and flexible glass reliability and has three chapters with authors from Corning. The second section focuses on flexible glass device fabrication which includes chapters on roll-to-roll processing, vacuum deposition, and printed electronics. These chapters are authored by established experts in their respective fields that have extensive experience in processing flexible glass substrates in toolsets that range from research to pilot scale. The third section focuses on flexible glass device applications and includes chapters on photovoltaics, displays, integrated photonics, and microelectronics integration. These are authored by experts with direct experience in fabricating and characterizing flexible glass devices. The diverse list of authors and their depth of experience in working with a variety of material systems, processes, and device technologies significantly adds valuable context to the overall flexible glass discussion.
Download or read book Microelectronics Failure Analysis written by EDFAS Desk Reference Committee and published by ASM International. This book was released on 2011 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes bibliographical references and index.
Download or read book Sub Micron Semiconductor Devices written by Ashish Raman and published by CRC Press. This book was released on 2022-05-10 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive reference text discusses novel semiconductor devices, including nanostructure field-effect transistors, photodiodes, high electron mobility transistors, and oxide-based devices. The text covers submicron semiconductor devices, device modeling, novel materials for devices, novel semiconductor devices, optimization techniques, and their application in detail. It covers such important topics as negative capacitance devices, surface-plasmon resonance devices, Fermi-level pinning, external stimuli-based optimization techniques, optoelectronic devices, and architecture-based optimization techniques. The book: Covers novel semiconductor devices with submicron dimensions Discusses comprehensive device optimization techniques Examines conceptualization and modeling of semiconductor devices Covers circuit and sensor-based application of the novel devices Discusses novel materials for next-generation devices This text will be useful for graduate students and professionals in fields including electrical engineering, electronics and communication engineering, materials science, and nanoscience.
Download or read book Advances in Nanotechnology Research and Application 2012 Edition written by and published by ScholarlyEditions. This book was released on 2012-12-26 with total page 14170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Nanotechnology Research and Application / 2012 Edition is a ScholarlyEditions™ eBook that delivers timely, authoritative, and comprehensive information about Nanotechnology. The editors have built Advances in Nanotechnology Research and Application / 2012 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Nanotechnology in this eBook to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Advances in Nanotechnology Research and Application / 2012 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Government Reports Annual Index written by and published by . This book was released on 1985 with total page 1150 pages. Available in PDF, EPUB and Kindle. Book excerpt:
