Download or read book Analysis of Structures on Elastic Foundations written by Edward Tsudik and published by J. Ross Publishing. This book was released on 2012-07 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis of Structures on Elastic Foundations is a practical guide for structural and geotechnical engineers as well as graduate students working in foundation engineering. Included are detailed descriptions of practical methods of analysis of various foundations including simple beams on elastic foundations as well as very complex foundations such as mat foundations supported on piles. Methods for fast and easy hand analysis in addition to methods for exact computer analysis are presented. Most of the methods are developed for three soil models: Winkler foundation, elastic half-spaces, and elastic layers. Numerous numerical examples illustrate the applications of these methods.

Download or read book Analysis of Structures on Elastic Foundation written by Levon G. Petrosian and published by CRC Press. This book was released on 2022-06-12 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: - Introduces a general approach to the method of integral transforms based on the spectral theory of the linear differential operators. - Presents a new, versatile foundation model with a number of advantages over the ground-based models currently used in practical calculations. - Provides new transforms which will aid in solving various problems relevant to bars, beams, plates, and shells in particular for the structures on elastic foundation. - Examines the methods of solving boundary-value problems typical for structural mechanics and related fields.

Download or read book Analysis and Design of Elastic Beams written by Walter D. Pilkey and published by John Wiley & Sons. This book was released on 2002-11-20 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: State-of-the-art coverage of modern computational methods for the analysis and design of beams Analysis and Design of Elastic Beams presents computer models and applications related to thin-walled beams such as those used in mechanical and aerospace designs, where thin, lightweight structures with high strength are needed. This book will enable readers to compute the cross-sectional properties of individual beams with arbitrary cross-sectional shapes, to apply a general-purpose computer analysis of a complete structure to determine the forces and moments in the individual members, and to use a unified approach for calculating the normal and shear stresses, as well as deflections, for those members' cross sections. In addition, this book augments a solid foundation in the basic structural design theory of beams by: * Providing coverage of thin-wall structure analysis and optimization techniques * Applying computer numerical methods to classical design methods * Developing computational solutions for cross-sectional properties and stresses using finite element analyses Including access to an associated Web site with software for the analysis and design of any cross-sectional shape, Analysis and Design of Elastic Beams: Computational Methods is an essential reference for mechanical, aerospace, and civil engineers and designers working in the automotive, ship, and aerospace industries in product and process design, machine design, structural design, and design optimization, as well as students and researchers in these areas.

Download or read book Analysis of Beams on Elastic Foundations written by Glyn Jones and published by Thomas Telford. This book was released on 1997 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been specifically written to describe finite difference solutions to variations in beam on elastic foundation problems using micro-computers. The accompanying BEF (Beam on Elastic Foundation) software can analyze all the practical applications identified in the text.

Download or read book Elastic Analysis of Soil Foundation Interaction written by A.P.S. Selvadurai and published by Elsevier. This book was released on 2013-10-22 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developments in Geotechnical Engineering, Vol. 17: Elastic Analysis of Soil-Foundation Interaction focuses on the analysis of the interaction between structural foundations and supporting soil media. The publication first elaborates on soil-foundation interaction problems; idealized soil response models for the analysis of soil-foundation interaction; and plane-strain analysis of an infinite plate and an infinitely long beam. Discussions focus on three-dimensional effects in the infinite beam problem, elastic models of soil behavior, foundation and interface behavior, and elastic-plastic and time-dependent behavior of soil masses. The manuscript then ponders on the analysis of beams of finite length, axisymmetric three-dimensional problem of an infinite plate, and analysis of finite plates. Concerns cover axisymmetric loading of a circular plate, analysis of rectangular plates, axisymmetric three-dimensional problem of the infinite plate, modifications of the thin plate theory, finite beams on a two-parameter elastic medium, and finite beams on an elastic solid medium. The book tackles the determination of soil parameters, experimental investigations and field studies, as well as experimental investigations and field studies and measurement and interpretation of parameters encountered in the idealized soil models in relation to soil-foundation behavior. The publication is a valuable reference for researchers interested in the elastic analysis of soil-foundation interaction.

Download or read book Static and Dynamic Analysis of Engineering Structures written by Levon G. Petrosian and published by John Wiley & Sons. This book was released on 2020-05-11 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: An authoritative guide to the theory and practice of static and dynamic structures analysis Static and Dynamic Analysis of Engineering Structures examines static and dynamic analysis of engineering structures for methodological and practical purposes. In one volume, the authors – noted engineering experts – provide an overview of the topic and review the applications of modern as well as classic methods of calculation of various structure mechanics problems. They clearly show the analytical and mechanical relationships between classical and modern methods of solving boundary value problems. The first chapter offers solutions to problems using traditional techniques followed by the introduction of the boundary element methods. The book discusses various discrete and continuous systems of analysis. In addition, it offers solutions for more complex systems, such as elastic waves in inhomogeneous media, frequency-dependent damping and membranes of arbitrary shape, among others. Static and Dynamic Analysis of Engineering Structures is filled with illustrative examples to aid in comprehension of the presented material. The book: Illustrates the modern methods of static and dynamic analysis of structures; Provides methods for solving boundary value problems of structural mechanics and soil mechanics; Offers a wide spectrum of applications of modern techniques and methods of calculation of static, dynamic and seismic problems of engineering design; Presents a new foundation model. Written for researchers, design engineers and specialists in the field of structural mechanics, Static and Dynamic Analysis of Engineering Structures provides a guide to analyzing static and dynamic structures, using traditional and advanced approaches with real-world, practical examples.

Download or read book Foundation Engineering Analysis and Design written by An-Bin Huang and published by CRC Press. This book was released on 2017-12-06 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the core roles of a practising geotechnical engineer is to analyse and design foundations. This textbook for advanced undergraduates and graduate students covers the analysis, design and construction of shallow and deep foundations and retaining structures as well as the stability analysis and mitigation of slopes. It progressively introduces critical state soil mechanics and plasticity theories such as plastic limit analysis and cavity expansion theories before leading into the theories of foundation, lateral earth pressure and slope stability analysis. On the engineering side, the book introduces construction and testing methods used in current practice. Throughout it emphasizes the connection between theory and practice. It prepares readers for the more sophisticated non-linear elastic-plastic analysis in foundation engineering which is commonly used in engineering practice, and serves too as a reference book for practising engineers. A companion website provides a series of Excel spreadsheet programs to cover all examples included in the book, and PowerPoint lecture slides and a solutions manual for lecturers. Using Excel, the relationships between the input parameters and the design and analysis results can be seen. Numerical values of complex equations can be calculated quickly. non-linearity and optimization can be brought in more easily to employ functioned numerical methods. And sophisticated methods can be seen in practice, such as p-y curve for laterally loaded piles and flexible retaining structures, and methods of slices for slope stability analysis.

Download or read book Finite Element Method written by G.R. Liu and published by Elsevier. This book was released on 2003-02-21 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Finite Element Method (FEM) has become an indispensable technology for the modelling and simulation of engineering systems. Written for engineers and students alike, the aim of the book is to provide the necessary theories and techniques of the FEM for readers to be able to use a commercial FEM package to solve primarily linear problems in mechanical and civil engineering with the main focus on structural mechanics and heat transfer.Fundamental theories are introduced in a straightforward way, and state-of-the-art techniques for designing and analyzing engineering systems, including microstructural systems are explained in detail. Case studies are used to demonstrate these theories, methods, techniques and practical applications, and numerous diagrams and tables are used throughout.The case studies and examples use the commercial software package ABAQUS, but the techniques explained are equally applicable for readers using other applications including NASTRAN, ANSYS, MARC, etc. - A practical and accessible guide to this complex, yet important subject - Covers modeling techniques that predict how components will operate and tolerate loads, stresses and strains in reality

Download or read book Examples in Structural Analysis Second Edition written by William M.C. McKenzie and published by CRC Press. This book was released on 2013-12-20 with total page 837 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of Examples in Structural Analysis uses a step-by-step approach and provides an extensive collection of fully worked and graded examples for a wide variety of structural analysis problems. It presents detailed information on the methods of solutions to problems and the results obtained. Also given within the text is a summary of each of the principal analysis techniques inherent in the design process and where appropriate, an explanation of the mathematical models used. The text emphasises that software should only be used if designers have the appropriate knowledge and understanding of the mathematical modelling, assumptions and limitations inherent in the programs they use. It establishes the use of hand-methods for obtaining approximate solutions during preliminary design and an independent check on the answers obtained from computer analyses. What’s New in the Second Edition: New chapters cover the development and use of influence lines for determinate and indeterminate beams, as well as the use of approximate analyses for indeterminate pin-jointed and rigid-jointed plane-frames. This edition includes a rewrite of the chapter on buckling instability, expands on beams and on the use of the unit load method applied to singly redundant frames. The x-y-z co-ordinate system and symbols have been modified to reflect the conventions adopted in the structural Eurocodes. William M. C. McKenzie is also the author of six design textbooks relating to the British Standards and the Eurocodes for structural design and one structural analysis textbook. As a member of the Institute of Physics, he is both a chartered engineer and a chartered physicist and has been involved in consultancy, research and teaching for more than 35 years.

Download or read book Vibration of solids and structures under moving loads written by L. Frýba and published by Springer Science & Business Media. This book was released on 2013-04-18 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transport engineering structures are subjected to loads that vary in both time and space. In general mechanics parlance such loads are called moving loads. It is the aim of the book to analyze the effects of this type of load on various elements, components, structures and media of engineering me chanics. In recent years all branches of transport have experienced great advances characterized by increasingly higher speeds and weights of vehicles. As a result, structures and media over or in which the vehicles move have been subjected to vibrations and dynamic stresses far larger than ever before. The author has studied vibrations of elastic and inelastic bodies and structures under the action of moving loads for many years. In the course of his career he has published a number of papers dealing with various aspects of the problem. On the strength of his studies he has arrived at the conclusion that the topic has so grown in scope and importance as to merit a comprehensive treatment. The book is the outcome of his attempt to do so in a single monograph.

Download or read book Dynamics of Structure and Foundation A Unified Approach written by Indrajit Chowdhury and published by CRC Press. This book was released on 2008-12-17 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to provide engineers with quick access to current and practical information on the dynamics of structure and foundation, this unique work, consisting of two separately available volumes, serves as a complete reference, especially for those involved with earthquake or dynamic analysis, or the design of machine foundations in the oil, gas, a

Download or read book Advanced Methods of Structural Analysis written by Igor A. Karnovsky and published by Springer Nature. This book was released on 2021-03-16 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: This revised and significantly expanded edition contains a rigorous examination of key concepts, new chapters and discussions within existing chapters, and added reference materials in the appendix, while retaining its classroom-tested approach to helping readers navigate through the deep ideas, vast collection of the fundamental methods of structural analysis. The authors show how to undertake the numerous analytical methods used in structural analysis by focusing on the principal concepts, detailed procedures and results, as well as taking into account the advantages and disadvantages of each method and sphere of their effective application. The end result is a guide to mastering the many intricacies of the range of methods of structural analysis. The book differentiates itself by focusing on extended analysis of beams, plane and spatial trusses, frames, arches, cables and combined structures; extensive application of influence lines for analysis of structures; simple and effective procedures for computation of deflections; introduction to plastic analysis, stability, and free and forced vibration analysis, as well as some special topics. Ten years ago, Professor Igor A. Karnovsky and Olga Lebed crafted a must-read book. Now fully updated, expanded, and titled Advanced Methods of Structural Analysis (Strength, Stability, Vibration), the book is ideal for instructors, civil and structural engineers, as well as researches and graduate and post graduate students with an interest in perfecting structural analysis.

Download or read book Shear Deformable Beams and Plates written by C.M. Wang and published by Elsevier. This book was released on 2000-07-19 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most books on the theory and analysis of beams and plates deal with the classical (Euler-Bernoulli/Kirchoff) theories but few include shear deformation theories in detail. The classical beam/plate theory is not adequate in providing accurate bending, buckling, and vibration results when the thickness-to-length ratio of the beam/plate is relatively large. This is because the effect of transverse shear strains, neglected in the classical theory, becomes significant in deep beams and thick plates. This book illustrates how shear deformation theories provide accurate solutions compared to the classical theory. Equations governing shear deformation theories are typically more complicated than those of the classical theory. Hence it is desirable to have exact relationships between solutions of the classical theory and shear deformation theories so that whenever classical theory solutions are available, the corresponding solutions of shear deformation theories can be readily obtained. Such relationships not only furnish benchmark solutions of shear deformation theories but also provide insight into the significance of shear deformation on the response. The relationships for beams and plates have been developed by many authors over the last several years. The goal of this monograph is to bring together these relationships for beams and plates in a single volume. The book is divided into two parts. Following the introduction, Part 1 consists of Chapters 2 to 5 dealing with beams, and Part 2 consists of Chapters 6 to 13 covering plates. Problems are included at the end of each chapter to use, extend, and develop new relationships.

Download or read book Structural Analysis written by T. S. Thandavamoorthy and published by Oxford University Press, USA. This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a balanced coverage of concepts, basic definitions, and analytical techniques in the field of structural analysis. Starting with the coverage of basic topics such as loads and forms of structures, analysis and deflection of simple beams, and strain energy theorems, it discusses specific analysis methods for statically indeterminate structures, such as slope deflection, moment distribution, and Kani's methods. It also discusses certain advanced topics such as finite element method, plastic analysis of structures, and beams on elastic foundation. The text is user-friendly with a large number of worked-out examples and problems to encourage the reader towards independent problem solving. Undergraduate students of engineering and AMIE as well as practising professionals would find this book extremely useful for its exhaustive coverage of analysis techniques.

Download or read book Tall Building Structures written by Bryan Stafford Smith and published by Wiley-Interscience. This book was released on 1991-07-17 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Examines structural aspects of high rise buildings, particularly fundamental approaches to the analysis of the behavior of different forms of building structures including frame, shear wall, tubular, core and outrigger-braced systems. Introductory chapters discuss the forces to which the structure is subjected, design criteria which are of the greatest relevance to tall buildings, and various structural forms which have developed over the years since the first skyscrapers were built at the turn of the century. A major chapter is devoted to the modeling of real structures for both preliminary and final analyses. Considerable attention is devoted to the assessment of the stability of the structure, and the significance of creep and shrinkage is discussed. A final chapter is devoted to the dynamic response of structures subjected to wind and earthquake forces. Includes both accurate computer-based and approximate methods of analysis.

Download or read book Stability of Structures written by Z. P. Ba?ant and published by World Scientific. This book was released on 2010 with total page 1039 pages. Available in PDF, EPUB and Kindle. Book excerpt: A crucial element of structural and continuum mechanics, stability theory has limitless applications in civil, mechanical, aerospace, naval and nuclear engineering. This text of unparalleled scope presents a comprehensive exposition of the principles and applications of stability analysis. It has been proven as a text for introductory courses and various advanced courses for graduate students. It is also prized as an exhaustive reference for engineers and researchers. The authors' focus on understanding of the basic principles rather than excessive detailed solutions, and their treatment of each subject proceed from simple examples to general concepts and rigorous formulations. All the results are derived using as simple mathematics as possible. Numerous examples are given and 700 exercise problems help in attaining a firm grasp of this central aspect of solid mechanics. The book is an unabridged republication of the 1991 edition by Oxford University Press and the 2003 edition by Dover, updated with 18 pages of end notes.

Download or read book Encyclopedia of Thermal Stresses written by Richard B. Hetnarski and published by Springer. This book was released on 2013-12-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Encyclopedia of Thermal Stresses is an important interdisciplinary reference work. In addition to topics on thermal stresses, it contains entries on related topics, such as the theory of elasticity, heat conduction, thermodynamics, appropriate topics on applied mathematics, and topics on numerical methods. The Encyclopedia is aimed at undergraduate and graduate students, researchers and engineers. It brings together well established knowledge and recently received results. All entries were prepared by leading experts from all over the world, and are presented in an easily accessible format. The work is lavishly illustrated, examples and applications are given where appropriate, ideas for further development abound, and the work will challenge many students and researchers to pursue new results of their own. This work can also serve as a one-stop resource for all who need succinct, concise, reliable and up to date information in short encyclopedic entries, while the extensive references will be of interest to those who need further information. For the coming decade, this is likely to remain the most extensive and authoritative work on Thermal Stresses.