Download or read book Analysis of Stress and Strain of Pressurized Thick Walled Cylinders written by Keith Aaron Demarest and published by . This book was released on 2007 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stress and Strain Distributions in a Thick walled Cylinder of Strain hardening Material Elastic plastically Strained by Internal Pressure written by Chang Keng Liu and published by . This book was released on 1965 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt: An attempt is made to extend Allen and Sopwith's solution for an elastic-plastic thick-walled cylinder of ideally plastic material to strain-hardening material. Tresca's criterion of yielding is modified so that the effective stress (usually considered a function of the effective strain) is proportional to a simple power function of the radius in the plastic zone. An analysis of Allen and Sopwith's solution for ideally plastic material seems to support and justify the proposed modification of the yielding criterionZ The exponent of the power function is taken as -3/2, -5/4, 1, and -1/2, in each case yielding an analytic solution corresponding to a particular strain-hardening material. Examples worked are for the case of plane strain and for a ratio of outer to inner radii of 2. 0. When the exponent is taken to be zero, the solution becomes identical to that of Allen and Sopwith. For exponents other than the five mentioned above, numerical or graphical methods of integration may be used.
Download or read book Circular Cylinders and Pressure Vessels written by Vincenzo Vullo and published by Springer Science & Business Media. This book was released on 2013-11-29 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides comprehensive coverage of stress and strain analysis of circular cylinders and pressure vessels, one of the classic topics of machine design theory and methodology. Whereas other books offer only a partial treatment of the subject and frequently consider stress analysis solely in the elastic field, Circular Cylinders and Pressure Vessels broadens the design horizons, analyzing theoretically what happens at pressures that stress the material beyond its yield point and at thermal loads that give rise to creep. The consideration of both traditional and advanced topics ensures that the book will be of value for a broad spectrum of readers, including students in postgraduate, and doctoral programs and established researchers and design engineers. The relations provided will serve as a sound basis for the design of products that are safe, technologically sophisticated, and compliant with standards and codes and for the development of innovative applications.
Download or read book Stress Strain and Failure Analysis of Tungsten Carbide Thick walled Cylinders for High Pressure Equipment written by Claudio R. Boer and published by . This book was released on 1978 with total page 530 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Inelastic Behavior of Thick Walled Cylinders Made of Strain Hardening Materials written by and published by . This book was released on 1971 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: An effective incremental theory was developed for solving the problem of partially yielded, thick-walled cylinders made of strain-hardening materials subjected to any combination of internal pressure, external pressure, and end loading. The theory developed in the Research Directorate, U.S. Army Weapons Command, includes Prandtl-Reuss' incremental stress-strain laws, Von Mises' flow criterion, and the strain-hardening and compressibility properties of a material. Since the consideration of stress and strain history is involved in the analysis, the present theory is particularly suitable for predicting stress and strain distribution, and location of the elastic-plastic boundary of a thick-walled cylinder subjected to nonproportionate loading.
Download or read book Structural Analysis written by O. A. Bauchau and published by Springer Science & Business Media. This book was released on 2009-08-03 with total page 943 pages. Available in PDF, EPUB and Kindle. Book excerpt: The authors and their colleagues developed this text over many years, teaching undergraduate and graduate courses in structural analysis courses at the Daniel Guggenheim School of Aerospace Engineering of the Georgia Institute of Technology. The emphasis is on clarity and unity in the presentation of basic structural analysis concepts and methods. The equations of linear elasticity and basic constitutive behaviour of isotropic and composite materials are reviewed. The text focuses on the analysis of practical structural components including bars, beams and plates. Particular attention is devoted to the analysis of thin-walled beams under bending shearing and torsion. Advanced topics such as warping, non-uniform torsion, shear deformations, thermal effect and plastic deformations are addressed. A unified treatment of work and energy principles is provided that naturally leads to an examination of approximate analysis methods including an introduction to matrix and finite element methods. This teaching tool based on practical situations and thorough methodology should prove valuable to both lecturers and students of structural analysis in engineering worldwide. This is a textbook for teaching structural analysis of aerospace structures. It can be used for 3rd and 4th year students in aerospace engineering, as well as for 1st and 2nd year graduate students in aerospace and mechanical engineering.
Download or read book A Simple Approach for Determination of Bursting Pressure of a Thick Walled Cylinder written by S. C. Chu and published by . This book was released on 1984 with total page 22 pages. Available in PDF, EPUB and Kindle. Book excerpt: By using the true-stress true-strain relation, a simple finite-strain incompressible analytical solution technique is developed to predict pressure deformation relations up to the failure of thick-walled cylinders subjected to internal pressure. The material is assumed to be an isotropic hardening material that obeys the von Mises yield condition. The flow law for the material incorporates the Prandtl-Reuss stress-strain relations and a loading function represented by the true-stress versus true-strain diagram. Poisson's ratio is assumed to be equal to one-half for both elastic and plastic strains. The bursting pressure for thick-walled cylinders made of either SAE 1045 steel or copper is presented graphically for various ratios of outer and inner radii of undeformed cylinders. The true location of inner surface of cylinders made of both metals at various pressure levels was determined and presented graphically. Pressure expansion curves for cylinders made of SAE 1045 steel and OFHC copper are presented. (Author).
Download or read book Applied Stress Analysis written by T.H. Hyde and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume records the proceedings of an international conference organised as a tribute to the contribution made by Professor H. Fessler over the whole of his pro fessionallife, in the field of applied stress analysis. The conference, held at the Univer sity of Nottingham on 30 and 31 August 1990, was timed to coincide with the date of his formal retirement from the post of Professor of Experimental Stress Analysis in the University. The idea grew from discussions between some of Professor Fessler's academic associates from Nottingham and elsewhere. An organising committee was set up, and it was decided to invite contributions to the conference in the form of review papers and original research papers in the field of experimental, theoretical and computational stress analysis. The size of the response, both in papers submitted and in attendance at the conference, indicates that the idea proved attractive to many of his peers, former associates and research students. A bound copy of the volume is to be presented to Professor Fessler at the conference dinner on 30 August 1990.
Download or read book Instability Phenomena in Thin walled Cylinders written by W. R. Russ and published by . This book was released on 1956 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Elastic Analysis of Thick walled Filament wound Cylinders Under Combined Pressure and Longitudinal Loads written by Robert Granville Gregory and published by . This book was released on 1969 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Pressure Vessels written by Donald M. Fryer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Pressure Vessels is the only book to present timely information on high pressure vessel design for student engineers, mechanical and chemical engineers who design and build these vessels, and for chemical engineers, plant engineers and facilities managers who use them. It concentrates on design issues, giving the reader comprehensive coverage of the design aspects of the ASME High Pressure System Standard and the forthcoming ASME High Pressure Vessel Code. Coverage of the safety requirements of these new standards is included, as well as offering the reader examples and original data, a glossary of terms, SI conversions, and lists of references.
Download or read book A Thermoelastic Transversely Isotropic Thick Walled Cylinder disk Application An Analytical Solution and Study written by and published by . This book was released on 1989 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pressure Vessel Design Manual written by Dennis R. Moss and published by Butterworth-Heinemann. This book was released on 2012-12-31 with total page 825 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pressure vessels are closed containers designed to hold gases or liquids at a pressure substantially different from the ambient pressure. They have a variety of applications in industry, including in oil refineries, nuclear reactors, vehicle airbrake reservoirs, and more. The pressure differential with such vessels is dangerous, and due to the risk of accident and fatality around their use, the design, manufacture, operation and inspection of pressure vessels is regulated by engineering authorities and guided by legal codes and standards. Pressure Vessel Design Manual is a solutions-focused guide to the many problems and technical challenges involved in the design of pressure vessels to match stringent standards and codes. It brings together otherwise scattered information and explanations into one easy-to-use resource to minimize research and take readers from problem to solution in the most direct manner possible. - Covers almost all problems that a working pressure vessel designer can expect to face, with 50+ step-by-step design procedures including a wealth of equations, explanations and data - Internationally recognized, widely referenced and trusted, with 20+ years of use in over 30 countries making it an accepted industry standard guide - Now revised with up-to-date ASME, ASCE and API regulatory code information, and dual unit coverage for increased ease of international use
Download or read book A Study of the Collapsing Pressure of Thin walled Cylinders written by Rolland George Sturm and published by . This book was released on 1941 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Process Equipment Design written by Lloyd E. Brownell and published by John Wiley & Sons. This book was released on 1959-01-15 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: A complete overview and considerations in process equipment design Handling and storage of large quantities of materials is crucial to the chemical engineering of a wide variety of products. Process Equipment Design explores in great detail the design and construction of the containers – or vessels – required to perform any given task within this field. The book provides an introduction to the factors that influence the design of vessels and the various types of vessels, which are typically classified according to their geometry. The text then delves into design and other considerations for the construction of each type of vessel, providing in the process a complete overview of process equipment design.
Download or read book STRESSES IN THICK WALLED CYLINDERS written by R Beeuwkes (Jr) and published by . This book was released on 1946 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: The report contains: (1) Bore and outer surface stress and strain data for tubes, loaded with an axially symmetric approximately semi-infinite uniform bore pressure, and having wall ratios of 1.25, 1.50, 1.75, 2.00, 2.25, and 2.50; (2) A formula for use in analyzing and interpolating the stress and strain data; (3) Formulae for determining the influence of heat on strains; (4) Formulae for stress concentration and influence of crack depth on bursting pressure. (Author).
Download or read book disign of thick walled pressure vessels for elevated temperature service written by h.r. voorhees and published by . This book was released on 1955 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:
