Download or read book Analysis of Rubber and Rubber like Polymers written by William Charles Wake and published by Elsevier Science & Technology. This book was released on 1983 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis of Rubber and Rubber like Polymers written by M.J. Loadman and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of this book (1958) described an analytical situation which had existed for a number of years for maintaining quality control on vulcanizates of natural rubber although the situation had recently been disturbed by the introduction of a range of synthetic rubbers which required identification and quantitative estimation. For the former purpose 'wet' chemistry, based on various imperfectly understood organic reactions, was pressed into service. Alongside this was the first introduction of instrumental analysis, using the infrared spectra of either the polymers or, more usually, their pyrolytic products to 'fingerprint' the material. The identification of a range of organic accelerators, antioxidants and their derivatives which had been intro duced during the 1920s and 30s was, in the first edition, dealt with by a combination of column chromatography and infrared spectroscopy or by paper chromatography. Quantitative procedures were, however, still classical in the tradition of gravimetric or volumetric assays with an initially weighed sample yielding, after chemical manipulation, a carefully precipitated, dried and weighed end product, or a solution of known composition whose weight or titre, as a percentage of the initial sample, quantified the function being determined. The second edition of this work (1968) consolidated the newer techni ques which had been introduced in the first without adding to them although, in other applications of analytical chemistry, instrumental analysis had already brought about a transformation in laboratory practice.
Download or read book The Analysis of Rubber and Rubber like Polymers written by William Charles Wake and published by . This book was released on 1969 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Analysis of Rubber and Rubber like Polymers written by William Charles Wake and published by Wiley-Interscience. This book was released on 1969 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rubber Analysis written by M. J. Forrest and published by iSmithers Rapra Publishing. This book was released on 2001 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: This review outlines each technique used in rubber analysis and then illustrates which methods are applied to determine which facts. This d104 is a good introduction to a very complex subject area and will enable the reader to understand the basic concepts of rubber analysis. Around 350 abstracts from the Rapra Polymer Library database accompany this review, to facilitate further reading. These include core original references together with abstracts from some of the latest papers on rubber analysis.
Download or read book Rubber Analysis written by Martin J. Forrest and published by Walter de Gruyter GmbH & Co KG. This book was released on 2019-04-01 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rubber analysis plays a vital part in ensuring that manufactured products are fit for purpose. This comprehensive, application-based book with up-to-date referencing covers all important applications and subject area associated with the analysis of rubber compounds and rubber products. Includes characterization of rubber polymers, rubber fumes, identification of extractables and leachables, as well as reverse engineering on compounded products.
Download or read book Synthetic Rubbers Their Chemistry and Technology written by D.C. Blackley and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has its origin in a proposal made a few years ago that I should collaborate with Dr H. J. Stern in the production of a third edition of his well-known text-book entitled Rubber: Natural and Synthetic. The sugges tion was that I should contribute a series of chapters on synthetic rubbers. Although, in the event, it has not proved possible to publish the full book in the form originally planned, it was apparent that, with some restructuring, the material which I had collected would be valuable as an independent summary of the chemistry and technology of synthetic rubbers. It is in this form that the material is now offered. The primary purpose of this book is to provide a brief up-to-date survey of the principal types of synthetic rubber which have been and are currently available. Two classes of material are included which are regarded by some as being thermoplastics rather than rubbers, namely, plasticised polyvinyl chloride and the thermoplastic synthetic rubbers. The topics which are covered for each main family of synthetic rubbers are (i) the sources of the monomers, (ii) polymerisation procedures and the effects of important polymerisation variables upon the rubber produced, (iii) the types of rubber currently available commercially, (iv) interesting aspects of the compounding of the rubbers, with special reference to such matters as vulcanisation, reinforcement, protection against degradation, and (where appropriate) plasticisation, and (v) an indication of applications.
Download or read book Analysis of Rubber and Rubber like Polymers written by William Charles Wake and published by Elsevier Science & Technology. This book was released on 1983 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Science and Technology of Rubber written by James E. Mark and published by Elsevier. This book was released on 2011-07-28 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 3rd edition of The Science and Technology of Rubber provides a broad survey of elastomers with special emphasis on materials with a rubber-like elasticity. As in the 2nd edition, the emphasis remains on a unified treatment of the material; exploring topics from the chemical aspects such as elastomer synthesis and curing, through recent theoretical developments and characterization of equilibrium and dynamic properties, to the final applications of rubber, including tire engineering and manufacturing. Many advances have been made in polymer and elastomers research over the past ten years since the 2nd edition was published. Updated material stresses the continuous relationship between the ongoing research in synthesis, physics, structure and mechanics of rubber technology and industrial applications. Special attention is paid to recent advances in rubber-like elasticity theory and new processing techniques for elastomers. This new edition is comprised of 20% new material, including a new chapter on environmental issues and tire recycling. · Explores new applications of rubber within the tire industry, from new filler materials to “green tires (a tire that has yet to undergo curing and vulcanization). · 30% of the material has been revised from the previous edition with the addition of 20% new material, including a chapter on the environment. · A mixture of theory, experiments, and practical procedures will offer value to students, practitioners, and research & development departments in industry.
Download or read book Blends of Natural Rubber written by K.C. Jones and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: Blends of natural rubber with speciality synthetic rubbers, such as nitrile rubber and ethylene propylene rubbers, have, in the past, failed to combine the best properties of polymers, resulting in a poor return in terms of added value from the blending process. The idea of blending synthetic rubbers with natural rubbe is certainly not a new one, but it is only now that this can be shown to be possible with consistently positive resluts, but eh use of novel techniques which this book describes, giving valuable information on the technology required and the results which can be achieved. Blends of Natural Rubber is an invaluable source of information for all those working in the area of rubber technology and polymer blend technology.
Download or read book Additives in Polymers written by Jan C. J. Bart and published by John Wiley & Sons. This book was released on 2005-04-08 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt: This industrially relevant resource covers all established and emerging analytical methods for the deformulation of polymeric materials, with emphasis on the non-polymeric components. Each technique is evaluated on its technical and industrial merits. Emphasis is on understanding (principles and characteristics) and industrial applicability. Extensively illustrated throughout with over 200 figures, 400 tables, and 3,000 references.
Download or read book Rubber Technology written by M. Morton and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: About ten years after the publication of the Second Edition (1973), it became apparent that it was time for an up-date of this book. This was especially true in this case, since the subject matter has traditionally dealt mainly with the structure, properties, and technology of the various elastomers used in industry, and these are bound to undergo significant changes over the period of a decade. In revising the contents of this volume, it was thought best to keep the orig inal format. Hence the first five chapters discuss the same general subject matter as before. The chapters dealing with natural rubber and the synthetic elastomers are up-dated, and an entirely new chapter has been added on the thermoplastic elastomers, which have, of course, grown tremendously in importance. Another innovation is the addition of a new chapter, "Miscellaneous Elastomers," to take care of "old" elastomers, e.g., polysulfides, which have decreased some what in importance, as well as to introduce some of the newly-developed syn thetic rubbers which have not yet reached high production levels. The editor wishes to express his sincere appreciation to all the contributors, without whose close cooperation this task would have been impossible. He would especially like to acknowledge the invaluable assistance of Dr. Howard Stephens in the planning of this book, and for his suggestion of suitable authors.
Download or read book Reverse Engineering of Rubber Products written by Saikat Das Gupta and published by CRC Press. This book was released on 2013-09-19 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reverse engineering is widely practiced in the rubber industry. Companies routinely analyze competitors' products to gather information about specifications or compositions. In a competitive market, introducing new products with better features and at a faster pace is critical for any manufacturer. Reverse Engineering of Rubber Products: Concepts,
Download or read book Science and Technology of Rubber written by James E. Mark and published by Elsevier. This book was released on 2014-06-28 with total page 771 pages. Available in PDF, EPUB and Kindle. Book excerpt: Science and Technology of Rubber, Second Edition provides a general survey of elastomers and an examination of rubberlike elasticity, with an emphasis on a unified treatment ranging from physical theory to final applications. Researchers in polymer science and engineering fields will find coverage of recent advances, unsolved problems and projections, and processing. Expanded coverage Updated chapters featuring substantially more information A unified treatment of the subject, with comprehensive coverage ranging from chemical aspects such as elastomer synthesis and curing, through theoretical developments and characterization of equilibrium and dynamic properties, to final applications
Download or read book Failure of Plastics and Rubber Products written by D. Wright and published by iSmithers Rapra Publishing. This book was released on 2001-06 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics and rubbers together make up the most adaptable and varied class of materials available to product designers. They may be transparent or opaque, rigid or flexible, lightweight, insulating, and weatherproof. They are used in almost every industry, and in every part of the home. Applications range from the humble hot water bottle to the sheathing on a high voltage cable, and from a simple scrubbing brush to a tank for storing hydrochloric acid. Products may be disposable (e.g. packaging goods) or intended to last for decades, such as a buried sewage pipe. However, it is this very diversity which makes materials selection so difficult, and appropriate design so important. Indeed the one thing that all these particular products have in common is their presence in this book of failures. Failures due to degradation may result from exposure to the weather or an aggressive operating environment. Alternatively they may be caused by the introduction of an external agent unforeseen by the product designer. They may be rapid or very slow, and they may result from a combination of factors. In this book Dr. Wright describes the following mechanisms of polymer degradation, and then illustrates each failure mechanism with a number of case studies: Thermo-oxidation, Photo-oxidation, Degradation due to ionising radiation, Chemical attack, Environmental stress cracking, Other miscellaneous effects, including treeing, electrochemical degradation and biodegradation. Many of the case studies are based on Dr. Wrights own experiences whilst working at Rapra. In each case he describes the circumstances of the failure, and discusses both the consequences of the failure and the lessons that may be learned from it. Most of the failed products are familiar to us all, and his style is both readable and informative. Photographs are included where available. The book will be essential reading for designers, engineers, product specifiers and forensic engineers. Materials suppliers and processors will also benefit from the pragmatic analysis and advice it contains. It will also be of value to all students of polymer science and technology, providing an essential insight into the practical application of plastics and rubbers and the potential problems. Finally, it will be of interest to a much broader readership, including anyone who ever wondered why things break, and it should become a standard reference work in all technical libraries. This book was written with the support of the UK Department of Trade and Industry. It is intended to raise awareness of the causes and consequences of polymer product failures, in order to reduce the future incidences of such failures, and their considerable costs to industry
Download or read book Advances in Elastomers II written by P. M. Visakh and published by Springer Science & Business Media. This book was released on 2013-04-09 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second volume of a two-volume work which summarizes in an edited format and in a fairly comprehensive manner many of the recent technical research accomplishments in the area of Elastomers. “Advances in Elastomers” discusses the various attempts reported on solving these problems from the point of view of the chemistry and the structure of elastomers, highlighting the drawbacks and advantages of each method. It summarize the importance of elastomers and their multiphase systems in human life and industry, and covers all the topics related to recent advances in elastomers, their blends, IPNs, composites and nanocomposites. This second volume is deals with composites and nanocomposites of elastomers.
Download or read book Recycling and Re use of Waste Rubber written by Martin J. Forrest and published by Walter de Gruyter GmbH & Co KG. This book was released on 2019-05-06 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recycling of rubber materials is necessary from both an environmental and economic perspective. This book describes everything from the world market to the many novel technologies and processes developed for the re-use and recycling of our common rubber materials. Devulcanization, production of rubber crumbs, reprocessing and manufacture of new materials are thoroughly described and discussed.
