Download or read book Analysis of Rolling Element Bearings written by Wan Changsen and published by . This book was released on 1991 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis of Rolling Element Bearings provides a comprehensive introduction into the theory and design of rolling element bearings.
Download or read book Advanced Dynamics of Rolling Elements written by P.K. Gupta and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: In any rotating machinery system, the bearing has traditionally been a crit ical member of the entire system, since it is the component that permits the relative motion between the stationary and moving parts. Depending on the application, a number of different bearing types have been used, such as oil-lubricated hydrodynamic bearings, gas bearings, magnetic suspensions, rolling element bearings, etc. Hydrodynamic bearings can provide any desired load support, but they are limited in stiffness and the associated power loss may be quite large. Gas bearings are used for high-precision applications where the supported loads are relatively light, bearing power losses are very low, and the rotating speeds generally high. For super precision components where no frictional dissipation or bearing power loss can be tolerated, magnetic suspensions are employed; again, the load support requirements are very low. Rolling element bearings have been widely used for those applications that require greater bearing versatility, due to the requirements for high-load and high-stiffness characteristics, while allowing moderate power loss and permitting variable speeds. A study of the dynamic interaction of rolling elements is, therefore, the subject of this text. Texts covering the analysis and design methodology of rolling elements are very limited. Notable works include Analysis of Stresses and Deflections (Jones, 1946, Vols. I and II), Ball and Roller Bearings, Their Theory, Design and Application (Eschmann, Hasbargen, and Weigand, 1958), Ball and Roller Bearing Engineering (Palmgren, 1959, 3rd ed. ), Advanced Bearing Technology (Bisson and Anderson, 1965), and Rolling Bearing Analysis (Harris, 1966).
Download or read book Rolling Bearing Analysis written by Tedric A. Harris and published by Wiley-Interscience. This book was released on 2001 with total page 1126 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the most well-known experts in the field brings cutting-edge research to practitioners in the new edition of this important reference. Covers the improved mathematical calculations for rolling bearing endurance developed by the American Society of Mechanical Engineers and the Society of Lubrication and Tribology Engineers. Updated with new material on Condition-Based Maintenance, new testing methods, and new bearing materials.
Download or read book Vibrations in Rotating Machinery written by IMechE (Institution of Mechanical Engineers) and published by John Wiley & Sons. This book was released on 2004-10-22 with total page 750 pages. Available in PDF, EPUB and Kindle. Book excerpt: This essential text contains the papers from the 8th international IMechE conference on Vibrations in Rotating Machinery held at the University of Wales, Swansea in September 2004. The themes of the volume are new developments and industrial applications of current technology relevant to the vibration and noise of rotating machines and assemblies. TOPICS INCLUDE Rotor balancing – including active and automatic balancing Special rotating machines – including micromachines Oil film bearings and dampers Active control methods for rotating machines Smart machine technology Dynamics of assembled rotors Component life predictions and life extension strategies The dynamics of geared systems Cracked rotors – detection, location ad prognosis Chaotic behaviour in machines Experimental methods and discoveries.
Download or read book Advanced Concepts of Bearing Technology written by Tedric A. Harris and published by CRC Press. This book was released on 2006-10-09 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the last four decades, Tedric Harris' Rolling Bearing Analysis has been the "bible" for engineers involved in rolling bearing technology. Why do so many students and practicing engineers rely on this book? The answer is simple: because of its complete coverage from low- to high-speed applications and full derivations of the underlying mathemati
Download or read book Rolling Bearing Analysis Advanced concepts of bearing technology written by Tedric A. Harris and published by . This book was released on 2006 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Rolling Bearing Analysis 2 Volume Set written by Tedric A. Harris and published by CRC Press. This book was released on 2006-11-02 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the last four decades, Tedric Harris' Rolling Bearing Analysis has been the "bible" for engineers involved in rolling bearing technology. Why do so many students and practicing engineers rely on this book? The answer is simple: because of its complete coverage from low- to high-speed applications and full derivations of the underlying mathematics from a leader in the field. Updated, revamped, and reorganized for the new millennium, the fifth incarnation of this classic reference is the most modern, flexible, and interactive tool in the field. What makes this edition so revolutionary? For starters, the coverage is split conveniently into two books: Essential Concepts of Bearing Technology introduces the fundamentals involved in the use, design, and performance of rolling bearings for more common applications; Advanced Concepts of Bearing Technology delves into more advanced topics involving more dynamic loading, more extreme conditions, and higher-speed applications. Furthermore, each book in this edition includes a CD-ROM that contains numerical examples as well as tables of dimensional, mounting, and life-rating data obtained from ABMA/ANSI standards. Whether you are interested in the mathematics behind the empirical values or methods for estimating the effects of complex stresses on fatigue endurance, Rolling Bearing Analysis, Fifth Edition compiles the techniques and the data that you need in a single, authoritative resource.
Download or read book Applications of Vibration Analysis to the Condition Monitoring of Rolling Element Bearings written by Neil Stanley Swansson and published by . This book was released on 1984 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Vibration Monitoring of Induction Motors written by William T. Thomson and published by Cambridge University Press. This book was released on 2020-12-03 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: Master the art of vibration monitoring of induction motors with this unique guide to on-line condition assessment and fault diagnosis, building on the author's fifty years of investigative expertise. It includes: *Robust techniques for diagnosing of a wide range of common faults, including shaft misalignment and/or soft foot, rolling element bearing faults, sleeve bearing faults, magnetic and vibrational issues, resonance in vertical motor drives, and vibration and acoustic noise from inverters. *Detailed technical coverage of thirty real-world industrial case studies, from initial vibration spectrum analysis through to fault diagnosis and final strip-down. *An introduction to real-world vibration spectrum analysis for fault diagnosis, and practical guidelines to reduce bearing failure through effective grease management. This definitive book is essential reading for industrial end-users, engineers, and technicians working in motor design, manufacturing, and condition monitoring. It will also be of interest to researchers and graduate students working on condition monitoring.
Download or read book Vibration Transmission Through Rolling Element Bearings in Geared Rotor Systems written by Rajendra Singh and published by DIANE Publishing. This book was released on 1990 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new mathematical model is proposed to examine the vibration transmission through rolling element bearings in geared rotor systems. Current bearing models, based on either ideal boundary conditions for the shaft or purely translational stiffness element description, cannot explain how the vibratory motion may be transmitted from the rotating shaft to the casing. For example, a vibration model based upon the simple bearing formulations can only predict purely in-plane type motion on the flexible casing plate given only bending motion on the shaft. However, experimental results have shown that the casing plate motion is primarily flexural. This study clarifies this issue qualitatively and quantitatively by developing a comprehensive bearing stiffness matrix is partially verified using available analytical and experimental data, and is completely characterized. This study extends the proposed bearing formulation to analyze the overall geared rotor system dynamics including casting and mounts. The bearing stiffness matrix is included in discrete system models using lumped parameter and/or dynamic finite element techniques. Eigensolution and forced harmonic response due to rotating mass unbalance or kinematic transmissions error excitation for the following examples are computed: (I) single-stage rotor system with flexible shaft supported by two bearings on rigid casing and flexible mounts, (II) spur gear pair system with motor and load inertials attached to two flexible shafts and supported by four bearings on flexibly mounted rigid casing, and (III) case II with flexible casing and rigid mounts. In several of these examples, analytical predictions compare well with measured data, validating the purposed formulation.
Download or read book Proceedings of IncoME V CEPE Net 2020 written by Dong Zhen and published by Springer. This book was released on 2022-05-17 with total page 935 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the latest advances, innovations and applications in the field of condition monitoring, plant maintenance and reliability, as presented by leading international researchers and engineers at the 5th International Conference on Maintenance Engineering and the 2020 Annual Conference of the Centre for Efficiency and Performance Engineering Network (IncoME-V & CEPE Net-2020), held in Zhuhai, China on October 23-25, 2020. Topics include vibro-acoustics monitoring, condition-based maintenance, sensing and instrumentation, machine health monitoring, maintenance auditing and organization, non-destructive testing, reliability, asset management, condition monitoring, life-cycle cost optimisation, prognostics and health management, maintenance performance measurement, manufacturing process monitoring, and robot-based monitoring and diagnostics. The contributions, which were selected through a rigorous international peer-review process, share exciting ideas that will spur novel research directions and foster new multidisciplinary collaborations.
Download or read book Essential Concepts of Bearing Technology written by Tedric A. Harris and published by CRC Press. This book was released on 2006-10-09 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the last four decades, Tedric Harris' Rolling Bearing Analysis has been the "bible" for engineers involved in rolling bearing technology. Why do so many students and practicing engineers rely on this book? The answer is simple: because of its complete coverage from low- to high-speed applications and full derivations of the underlying mathemati
Download or read book Modeling of Rolling Element Bearing Mechanics Theoretical Manual written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-10 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report documents the theoretical basis for the Rolling Element Bearing Analysis System (REBANS) analysis code which determines the quasistatic response to external loads or displacement of three types of high-speed rolling element bearings: angular contact ball bearings; duplex angular contact ball bearings; and cylindrical roller bearings. The model includes the effects of bearing ring and support structure flexibility. It is comprised of two main programs: the Preprocessor for Bearing Analysis (PREBAN) which creates the input files for the main analysis program; and Flexibility Enhanced Rolling Element Bearing Analysis (FEREBA), the main analysis program. A companion report addresses the input instructions for and features of the computer codes. REBANS extends the capabilities of the SHABERTH (Shaft and Bearing Thermal Analysis) code to include race and housing flexibility, including such effects as dead band and preload springs. Merchant, David H. and Greenhill, Lyn M. Unspecified Center...
Download or read book Computational Design of Rolling Bearings written by Hung Nguyen-Schäfer and published by Springer. This book was released on 2016-04-10 with total page 235 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively presents the computational design of rolling bearings dealing with many interdisciplinary difficult working fields. They encompass elastohydrodynamics (EHD), Hertzian contact theory, oil-film thickness in elastohydrodynamic lubrication (EHL), bearing dynamics, tribology of surface textures, fatigue failure mechanisms, fatigue lifetimes of rolling bearings and lubricating greases, Weibull distribution, rotor balancing, and airborne noises (NVH) in the rolling bearings. Furthermore, the readers are provided with hands-on essential formulas based on the up-to-date DIN ISO norms and helpful examples for computational design of rolling bearings. The topics are intended for undergraduate and graduate students in mechanical and material engineering, research scientists, and practicing engineers who want to understand the interactions between these working fields and to know how to design the rolling bearings for automotive industry and many other industries.
Download or read book Electrical Systems 2 written by Abdenour Soualhi and published by John Wiley & Sons. This book was released on 2020-04-14 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methods of diagnosis and prognosis play a key role in the reliability and safety of industrial systems. Failure diagnosis requires the use of suitable sensors, which provide signals that are processed to monitor features (health indicators) for defects. These features are required to distinguish between operating states, in order to inform the operator of the severity level, or even the type, of a failure. Prognosis is defined as the estimation of a systems lifespan, including how long remains and how long has passed. It also encompasses the prediction of impending failures. This is a challenge that many researchers are currently trying to address. Electrical Systems, a book in two volumes, informs readers of the theoretical solutions to this problem, and the results obtained in several laboratories in France, Spain and further afield. To this end, many researchers from the scientific community have contributed to this book to share their research results.
Download or read book Rolling Bearing Analysis Fifth Edition 2 Volume Set written by Tedric A. Harris and published by CRC Press. This book was released on 2006-11-02 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: For the last four decades, Tedric Harris' Rolling Bearing Analysis has been the "bible" for engineers involved in rolling bearing technology. Why do so many students and practicing engineers rely on this book? The answer is simple: because of its complete coverage from low- to high-speed applications and full derivations of the underlying mathematics from a leader in the field. Updated, revamped, and reorganized for the new millennium, the fifth incarnation of this classic reference is the most modern, flexible, and interactive tool in the field. What makes this edition so revolutionary? For starters, the coverage is split conveniently into two books: Essential Concepts of Bearing Technology introduces the fundamentals involved in the use, design, and performance of rolling bearings for more common applications; Advanced Concepts of Bearing Technology delves into more advanced topics involving more dynamic loading, more extreme conditions, and higher-speed applications. Furthermore, each book in this edition includes a CD-ROM that contains numerical examples as well as tables of dimensional, mounting, and life-rating data obtained from ABMA/ANSI standards. Whether you are interested in the mathematics behind the empirical values or methods for estimating the effects of complex stresses on fatigue endurance, Rolling Bearing Analysis, Fifth Edition compiles the techniques and the data that you need in a single, authoritative resource.
Download or read book Vibration based Condition Monitoring written by Robert Bond Randall and published by John Wiley & Sons. This book was released on 2011-03-25 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Without doubt the best modern and up-to-date text on the topic, wirtten by one of the world leading experts in the field. Should be on the desk of any practitioner or researcher involved in the field of Machine Condition Monitoring" Simon Braun, Israel Institute of Technology Explaining complex ideas in an easy to understand way, Vibration-based Condition Monitoring provides a comprehensive survey of the application of vibration analysis to the condition monitoring of machines. Reflecting the natural progression of these systems by presenting the fundamental material and then moving onto detection, diagnosis and prognosis, Randall presents classic and state-of-the-art research results that cover vibration signals from rotating and reciprocating machines; basic signal processing techniques; fault detection; diagnostic techniques, and prognostics. Developed out of notes for a course in machine condition monitoring given by Robert Bond Randall over ten years at the University of New South Wales, Vibration-based Condition Monitoring: Industrial, Aerospace and Automotive Applications is essential reading for graduate and postgraduate students/ researchers in machine condition monitoring and diagnostics as well as condition monitoring practitioners and machine manufacturers who want to include a machine monitoring service with their product. Includes a number of exercises for each chapter, many based on Matlab, to illustrate basic points as well as to facilitate the use of the book as a textbook for courses in the topic. Accompanied by a website www.wiley.com/go/randall housing exercises along with data sets and implementation code in Matlab for some of the methods as well as other pedagogical aids. Authored by an internationally recognised authority in the area of condition monitoring.
