Download or read book Analysis of Glass Panels Subjected to Blast Load written by Matthias Förch and published by Springer. This book was released on 2019-04-11 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present doctoral dissertation contributes to the analysis of glass panels subjected to blast load, concentrating on monolithic and laminated glass prior to glass fracture. A straightforward graphical solution for monolithic glass is presented to identify maximum deformation and maximum principal stress for small and large deformations for static and idealized blast load without software. On the basis of experimental tests, load duration factors kmod for impact and blast load design for annealed glass, heat strengthened glass and fully tempered glass are proposed. In addition, design strength values for impact and blast design based on the European and German standards are suggested. As a result, blast pressure capacity charts for monolithic fully tempered glass plates subjected to idealized blast load are presented. Moreover, design temperatures of interlayer in blast design situation based on empirical data in accordance with Eurocode are determined for vertical double glazed and triple glazed units for Germany, showing that laminated glass should not be regarded with monolithic glass approach in general.
Download or read book Dynamic Behavior of Materials Volume 1 written by Tom Proulx and published by Springer Science & Business Media. This book was released on 2011-05-27 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Behavior of Materials represents one of eight volumes of technical papers presented at the Society for Experimental Mechanics Annual Conference on Experimental and Applied Mechanics, held at Uncasville, Connecticut, June 13-16, 2011. The full set of proceedings also includes volumes on Mechanics of Biological Systems and Materials, Mechanics of Time-Dependent Materials and Processes in Conventional and Multifunctional Materials, MEMS and Nanotechnology; Optical Measurements, Modeling and, Metrology; Experimental and Applied Mechanics, Thermomechanics and Infra-Red Imaging, and Engineering Applications of Residual Stress.
Download or read book Research and Applications in Structural Engineering Mechanics and Computation written by Alphose Zingoni and published by CRC Press. This book was released on 2013-08-15 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research and Applications in Structural Engineering, Mechanics and Computation contains the Proceedings of the Fifth International Conference on Structural Engineering, Mechanics and Computation (SEMC 2013, Cape Town, South Africa, 2-4 September 2013). Over 420 papers are featured. Many topics are covered, but the contributions may be seen to fall
Download or read book Dynamic Behavior of Soft and Hard Materials Volume 2 written by R. Velmurugan and published by Springer Nature. This book was released on with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Issues in Engineering Research and Application 2013 Edition written by and published by ScholarlyEditions. This book was released on 2013-05-01 with total page 1160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Issues in Engineering Research and Application: 2013 Edition is a ScholarlyEditions™ book that delivers timely, authoritative, and comprehensive information about Noise Control Engineering. The editors have built Issues in Engineering Research and Application: 2013 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about Noise Control Engineering in this book to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Issues in Engineering Research and Application: 2013 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Polymer Composites in the Aerospace Industry written by P. E. Irving and published by Woodhead Publishing. This book was released on 2019-11-26 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer Composites in the Aerospace Industry, Second Edition, summarizes the latest research and developments on the design, manufacture and performance of composite components for aerospace structures. Sections cover the modeling, structure and behavior of 2D and 3D woven composites, the manufacture processes used for composite materials and components, buckling and compressive strength of laminates and manufacturing defects in composite materials, aspects of composite performance in aerospace structural design, including chapters on modeling stiffness and strength of structural elements, fatigue under uniaxial and multiaxial loads, fracture mechanics, impact strength and fatigue, crashworthiness, design and failure analysis of bolted joints, and much more. This updated edition is an essential reference resource for engineers, scientists and designers working in the development of composite materials in aerospace applications. - Presents detailed discussions on the design, modeling and analysis of conventional and advanced polymer composites used in aerospace applications - Provides an in-depth understanding of the performance parameters of aerospace composites, such as strength, stiffness and fatigue, impact and blast resistance - Includes significant developments that have occurred since 2015 (in production and manufacturing, fatigue modeling, test standards, adhesive bonding and repair and service techniques) - Features a brand new section on design applications, including helicopter components, fixed wing landing gear, aircraft wings and fuselage
Download or read book Proceedings of the 7th International Conference on Discrete Element Methods written by Xikui Li and published by Springer. This book was released on 2016-12-01 with total page 1414 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the latest advances in Discrete Element Methods (DEM) and technology. It is the proceeding of 7th International Conference on DEM which was held at Dalian University of Technology on August 1 - 4, 2016. The subject of this book are the DEM and related computational techniques such as DDA, FEM/DEM, molecular dynamics, SPH, Meshless methods, etc., which are the main computational methods for modeling discontinua. In comparison to continua which have been already studied for a long time, the research of discontinua is relatively new, but increases dramatically in recent years and has already become an important field. This book will benefit researchers and scientists from the academic fields of physics, engineering and applied mathematics, as well as from industry and national laboratories who are interested in the DEM.
Download or read book Structures Under Shock and Impact VII written by Norman Jones and published by Computational Mechanics. This book was released on 2002 with total page 620 pages. Available in PDF, EPUB and Kindle. Book excerpt: The shock and impact behaviour of structures is an extremely challenging area. It is therefore important to recognize and utilize the contributions emerging from theoretical, numerical and experimental studies on structures, as well as investigations into material properties under dynamic loading conditions.
Download or read book American Environmentalism written by J. Michael Martinez and published by CRC Press. This book was released on 2013-06-20 with total page 1227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Protecting the natural environment and promoting sustainability have become important objectives, but achieving such goals presents myriad challenges for even the most committed environmentalist. American Environmentalism: Philosophy, History, and Public Policy examines whether competing interests can be reconciled while developing consistent, coherent, effective public policy to regulate uses and protection of the natural environment without destroying the national economy. It then reviews a range of possible solutions. The book delves into key normative concepts that undergird American perspectives on nature by providing an overview of philosophical concepts found in the western intellectual tradition, the presuppositions inherent in neoclassical economics, and anthropocentric (human-centered) and biocentric (earth-centered) positions on sustainability. It traces the evolution of attitudes about nature from the time of the Ancient Greeks through Europeans in the Middle Ages and the Renaissance, the Enlightenment and the American Founders, the nineteenth and twentieth centuries, and up to the present. Building on this foundation, the author examines the political landscape as non-governmental organizations (NGOs), industry leaders, and government officials struggle to balance industrial development with environmental concerns. Outrageous claims, silly misrepresentations, bogus arguments, absurd contentions, and overblown prophesies of impending calamities are bandied about by many parties on all sides of the debate—industry spokespeople, elected representatives, unelected regulators, concerned citizens, and environmental NGOs alike. In lieu of descending into this morass, the author circumvents the silliness to explore the crucial issues through a more focused, disciplined approach. Rather than engage in acrimonious debate over minutiae, as so often occurs in the context of "green" claims, he recasts the issue in a way that provides a cohesive look at all sides. This effort may be quixotic, but how else to cut the Gordian knot?
Download or read book ICCS21 written by Antonio J.M. Ferreira and published by Società Editrice Esculapio. This book was released on 2018-07-23 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is well-known that the topic of composite mate- rials affects many engineering fields, such as civil, mechanical, aerospace, automotive and chemical. In the last decades, in fact, a huge number of scientific papers concerning these peculiar constituents has been published. Analogously, the industrial progress has been extremely noticeable. The study of composite materials, in general, is a challenging activity since the advancements both in the academia and in the industry provide continually new sparks to develop innovative ideas and applications. The communication, the sharing and the exchange of views can surely help the works of many researchers. This aspect represents the main purpose of this Conference, which aims to collect high-level contributions on the development and the application of composite materials. The establishment of this 21st edition of International Conference on Composite Structures has appeared appropriate to continue what has been begun during the previous editions. ICCS wants to be an occasion for many researchers from each part of the globe to meet and discuss about the recent advancements regarding the use of composite structures, sandwich panels, nanotechnology, bio-composites, delamination and fracture, experimental methods, manufacturing and other countless topics that have filled many sessions during this conference. As a proof of this event, which has taken place in Bologna (Italy), selected plenary and key-note lectures have been collected in the present book.
Download or read book Impact Behavior and Pedestrian Protection of Automotive Laminated Windshield written by Jun Xu and published by Springer. This book was released on 2018-11-03 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses one of the most important components for pedestrian safety in vehicles – laminated windshields. It includes detailed real-world material characterization results for laminated glass and testing methodologies, constitutive models, and step-by-step numerical simulation modeling and simulation methods. As such, the book provides readers a thorough understanding of the mechanical behaviors of laminated glass and windshields. It also presents fundamental test data, analysis methodologies and essential insights into laminated glass safety design and mechanical behavior prediction. The book addresses the needs of researchers, engineers and postgraduate students in the fields of automotive engineering, mechanical engineering and related areas.
Download or read book Advances in Thick Section Composite and Sandwich Structures written by Sung W. Lee and published by Springer Nature. This book was released on 2020-01-28 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes recent research findings on response and integrity of thick section composite and sandwich structures. In particular, it deals with these structures for marine applications under static and dynamic loads such as shock and slamming loads in severe sea environment including sea water, temperature extremes, hydrostatic pressure and Arctic conditions. Three-dimensional constitutive equations and failure criteria for structural response and integrity are considered. The book serves as an excellent repository of major advances in research on response and integrity of composite and sandwich structures made through research grants sponsored by the U.S. Office of Naval Research in the past decade. Collects major advances in response and integrity research; Emphasizes phenomena within severe environments; Illustrates underwater fluid-structure interactions, shock/blast loads, and slamming loads.
Download or read book Structures Under Shock and Impact VIII written by Norman Jones and published by Witpress. This book was released on 2004 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the broad range of research work currently being carried out in academia and industry, this book contains the proceedings of the Eighth International Conference on Structures Under Shock and Impact.
Download or read book Dynamic Behavior of Materials Volume 1 written by Vijay Chalivendra and published by Springer Science & Business Media. This book was released on 2012-09-27 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Behavior of Materials, Volume 1: Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics represents one of seven volumes of technical papers presented at the Society for Experimental Mechanics SEM 12th International Congress & Exposition on Experimental and Applied Mechanics, held at Costa Mesa, California, June 11-14, 2012. The full set of proceedings also includes volumes on Challenges in Mechanics of Time -Dependent Materials and Processes in Conventional and Multifunctional Materials, Imaging Methods for Novel Materials and Challenging Applications, Experimental and Applied Mechanics, 2nd International Symposium on the Mechanics of Biological Systems and Materials 13th International Symposium on MEMS and Nanotechnology and, Composite Materials and the 1st International Symposium on Joining Technologies for Composites.
Download or read book Proceedings of the 13th International Conference on Damage Assessment of Structures written by Magd Abdel Wahab and published by Springer. This book was released on 2019-07-04 with total page 957 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the proceedings of the 13th International Conference on Damage Assessment of Structures DAMAS 2019, 9-10 July 2019, Porto, Portugal. It presents the expertise of scientists and engineers in academia and industry in the field of damage assessment, structural health monitoring and non-destructive evaluation. The proceedings covers all research topics relevant to damage assessment of engineering structures and systems including numerical simulations, signal processing of sensor measurements and theoretical techniques as well as experimental case studies.
Download or read book Explosion Blast Response of Composites written by Adrian P. Mouritz and published by Woodhead Publishing. This book was released on 2017-05-22 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explosion Blast Response of Composites contains key information on the effects of explosions, shock waves, and detonation products (e.g. fragments, shrapnel) on the deformation and damage to composites. The book considers the blast response of laminates and sandwich composites, along with blast mitigation of composites (including coating systems and energy absorbing materials). Broken down under the following key themes: Introduction to explosive blast response of composites, Air explosion blast response of composites, Underwater explosion blast response of composites, and High strain rate and dynamic properties of composites, the book deals with an important and contemporary topic due to the extensive use of composites in applications where explosive blasts are an ever-present threat, such as military aircraft, armoured vehicles, naval ships and submarines, body armour, and other defense applications. In addition, the growing use of IEDs and other types of bombs used by terrorists to attack civilian and military targets highlights the need for this book. Many terrorist attacks occur in subways, trains, buses, aircraft, buildings, and other civil infrastructure made of composite materials. Designers, engineers and terrorist experts need the essential information to protect civilians, military personnel, and assets from explosive blasts. - Focuses on key aspects, including both modeling, analysis, and experimental work - Written by leading international experts from academia, defense agencies, and other organizations - Timely book due to the extensive use of composites in areas where explosive blasts are an ever-present threat in military applications
Download or read book Dynamic Behavior of Materials Volume 1 written by Dan Casem and published by Springer. This book was released on 2016-10-14 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic Behavior of Materials, Volume 1 of the Proceedings of the 2016 SEM Annual Conference& Exposition on Experimental and Applied Mechanics, the first volume of ten from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on fundamental and applied aspects of Experimental Mechanics, including papers on: Quantitative Visualization Fracture & Fragmentation Dynamic Behavior of Low Impedance Materials Shock & Blast Dynamic Behavior of Composites Novel Testing Techniques Hybrid Experimental & Computational Methods Dynamic Behavior of Geo-materials General Material Behavior
