Download or read book Analysis of Factors Influencing Deep Hole Drilling written by Ming-Fang Hua and published by . This book was released on 1984 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, SIld disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna and broader dissemination. tional publishing house to assure improved service Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 30 (thesis year 1985) a total of 12,400 theses titles from 26 Canadian and 186 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work.
Download or read book Deep Hole Drilling Feasibility Study written by Fenix & Scisson and published by . This book was released on 1969 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is feasible to drill a hole to a depth of 50,000 feet by utilizing conventional rotary drilling equipment and techniques. Existing equipment is capable of drilling the hole but modifications of some equipment items are warranted for completion of the lower portion of the hole. The whole could be started with presently available equipment as soon as funds are available, a location established, and a contractor selected. While the upper portion of the hole (20,000 - 30,000 ft.) is being drilled, equipment modifications could be made and supplemental equipment developed. This would allow time to make the equipment available when needed for the lower portion of the hole. Two locations are considered as established by the criteria, both in the Coast Ranges Province of California in the vicinity of the San Andreas Fault. One location would be in an area where granitic rock outcrops at the surface while the other would be in an area where the granitic is overlain by 10,000 feet of sediments. The estimated time to drill the hole under ideal conditions at either location is 4-3/4 years at an estimated cost of $20,000,000. [$400/ft].
Download or read book Proceedings of the 2023 9th International Conference on Architectural Civil and Hydraulic Engineering ICACHE 2023 written by Dayong Li and published by Springer Nature. This book was released on 2024-01-28 with total page 871 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an open access book. As an annual conference held successfully in the past 8 years, 2023 9th International Conference on Architectural, Civil and Hydraulic Engineering (ICACHE 2023) will be held by China University of Petroleum(East China)on October 13-15, 2023 in Qingdao, China. ICACHE 2023 is hosted by China University of Petroleum(East China)and organized by College of Pipeline and Civil Engineering, China University of Petroleum(East China)and supported by China University of Mining & Technology, Beijing, Shandong University of Science and Technology, Sun Yat-sen University, Central South University, Fujian Agriculture and Forestry University, Southeast University, Eshragh Institute of Higher Education, Shandong Chambroad HoldingGroup Co., Ltd., Qingdao Times Design Co., Ltd.. The conference is an international forum for the presentation of technological advances and research results in the fields of architecture, civil and hydraulic engineering. The conference will bring together leading researchers, engineers and scientists in the domain of interest from around the world. We warmly welcome previous and prospected authors submit your new research papers to ICACHE 2023, and share the valuable experiences with the scientist and scholars around the world.
Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1979 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Annual Report written by University of Wisconsin--Madison. College of Engineering and published by . This book was released on 1984 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Deep Hole Drilling written by and published by . This book was released on 1908 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Productivity Drilling Tools written by Viktor P. Astakhov and published by CRC Press. This book was released on 2024-05-03 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: This completely updated volume covers the design, manufacturing, and inspection of high‐productivity drilling tools (HPDT) and addresses common issues with drilling system components. It discards old notions and beliefs as it introduces scientifically and technically sound concepts and rules with detailed explanations and multiple practical examples. High‐Productivity Drilling Tools: Design and Geometry introduces the development of the concept of high‐productivity (HP) drill design and its manufacturing and application features. This book continues to develop the concept of a drilling system in the new edition and includes new practical examples. It explains how to properly design and manufacture drilling tools for a specific application and includes a detailed explanation of the design features, tool manufacturing and implementation practices, metrology of drilling and drilling tools, and the tool failure analysis. Using the coherency law as the guidelines introduced in the first edition, the new edition shows how to formulate the requirements for the components of the drilling system, pointing out that the drilling tool is the key component to be improved. This practical book should be on the shelves of all industrial engineers, those working in production and manufacturing, process designers, tool material designers, cutting tool designers, and quality specialists. Researchers, senior undergraduate students, and graduate students will also find this book full of very helpful reference information. This book is also available as a set - Drills: High-Productivity Drilling Tools, 2-Volume Set (9781032203508).
Download or read book Drills written by Viktor P. Astakhov and published by CRC Press. This book was released on 2014-04-08 with total page 876 pages. Available in PDF, EPUB and Kindle. Book excerpt: In a presentation that balances theory and practice, Drills: Science and Technology of Advanced Operations details the basic concepts, terminology, and essentials of drilling. The book addresses important issues in drilling operations, and provides help with the design of such operations. It debunks many old notions and beliefs while introducing sc
Download or read book Innovation Based Development of the Mineral Resources Sector Challenges and Prospects written by Vladimir Litvinenko and published by CRC Press. This book was released on 2018-10-11 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovation-Based Development of the Mineral Resources Sector: Challenges and Prospects contains the contributions presented at the XI Russian-German Raw Materials Conference (Potsdam, Germany, 7-8 November 2018). The Russian-German Raw Materials Conference is held within the framework of the “Permanent Russian-German Forum on the Issues of the Use of Raw Materials”, which has as goals to develop new approaches to effectively use energy, mineral and renewable natural resources and to initiate cooperation in the field of sustainability and environmental protection. The contributions cover current trends in the development of raw materials markets and the world economy, the state of the environment and new technologies applied in the sector, effectively responding to modern challenges. The 63 accepted papers are grouped into four main sections: • Mineral exploration and mining • Mining services • Processing of raw materials • Other Innovation-Based Development of the Mineral Resources Sector: Challenges and Prospects will be of interest to academics and researchers involved in the mineral resources sector, but also to professionals in the public, foreign trade and education fields, and representatives of major corporations and professional associations.
Download or read book The China Continental Scientific Drilling Project written by Da Wang and published by Springer. This book was released on 2015-03-06 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively introduces the drilling theory and practice behind CCSD-1 well drilling, the first stage of a key national scientific engineering project of China. In addition to access to variety of data and information accumulated decade during the project’s decade-long operation, readers also gain insight into state-of-the-art techniques and most recent achievements in China’s scientific drilling industry. Specifically, this work introduces the drilling engineering design, well site construction, and equipment and construction situation. It also provides a minute description on the new techniques that were developed for tackling the technical difficulties, expounds in detail the core drilling techniques for hard rock deep well, and treats diamond core drill bits, reaming drilling techniques in hard crystalline rocks, well-deviation control techniques for strong dipping strata, and much more. In summary, this book offers a valuable resource for engineers and technicians who engage in scientific drilling and a variety of resource drilling engineering; teachers and students who are interested in this field will also gain plentiful information. Prof. Da Wang, the former deputy director of China Geological Survey, was the director of the Engineering Centre, chief engineer and drill-site general director of China Continental Scientific Drilling Project.
Download or read book Proceedings of the 11th International Mine Ventilation Congress written by Xintan Chang and published by Springer. This book was released on 2018-08-03 with total page 1072 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings of the 11th International Mine Ventilation Congress (11th IMVC), is focused on mine ventilation, health and safety and Earth science. The IMVC has become the most influential international mine ventilation event in the world, and has long been a popular forum for ventilation researchers, practitioners, academics, equipment manufacturers and suppliers, consultants and government officials around the globe to explore research results, exchange best practices, and to launch new products for a better and safer industry. It also serves as a useful platform to attract and train future ventilation professionals and mine planning engineers, as well as for mining companies to discover better practices to provide better ventilation planning.
Download or read book Residual Stresses in Composite Materials written by Mahmood M. Shokrieh and published by Woodhead Publishing. This book was released on 2021-06-22 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: The residual stress is a common phenomenon in composite materials. They can either add to or significantly reduce material strength. Because of the increasing demand for high-strength, lightweight materials such as composites and their wide range of applications; it is critical that the residual stresses of composite materials are understood and measured correctly. The first edition of this book consists of thirteen chapters divided into two parts. The first part reviews destructive and non-destructive testing (NDT) techniques for measuring residual stresses. There are also additional chapters on using mathematical (analytical and numerical) methods for the calculation of residual stresses in composite materials. These include the simulated hole drilling method, the slitting/crack compliance method, measuring residual stresses in homogeneous and composite glass materials using photoelastic techniques, and modeling residual stresses in composite materials. The second part of the book discusses measuring residual stresses in different types of composites including polymer and metal matrix composites. The addition of nanoparticles to the matrix of polymeric composites as a new technique for the reduction of residual stresses is also discussed. In the Second Edition of this book, each of the original chapters of the first edition has been fully updated, taking into account the latest research and new developments. There are also five new chapters on the theoretical and experimental studies of residual stresses in the composite integrated circuits; residual stresses in additive manufacturing of polymers and polymer matrix composites; residual stresses in metal matrix composites fabricated by additive manufacturing; the eigenstrain based method for the incremental hole-drilling technique; and the estimation of residual stresses in polymer matrix composites using the digital image correlation technique. Residual Stresses in Composite Materials, Second Edition, provides a unique and comprehensive overview of this important topic and is an invaluable reference text for both academics and professionals working in the mechanical engineering, civil engineering, aerospace, automotive, marine, and sporting industries. Presents the latest developments on theoretical and experimental studies of residual stresses in composites Reviews destructive and non-destructive testing (NDT) techniques for measuring residual stresses Discusses residual stresses in the polymer matrix, metal matrix, and ceramic matrix composites Considers the addition of nanoparticles to the matrix as a new technique for reduction of residual stresses in polymeric composites Introduces the latest advancements of research on the residual stresses in additive-manufactured polymer and metal matrix composites
Download or read book Government wide Index to Federal Research Development Reports written by and published by . This book was released on 1967 with total page 1352 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the Third World Petroleum Congress Section Ii Actes Et Documents Du Troisieme Congres Mondial Du Petrole written by and published by Brill Archive. This book was released on with total page 758 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metal Cutting Theory and Practice written by David A. Stephenson and published by CRC Press. This book was released on 2005-12-02 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal cutting applications span the entire range from mass production to mass customization to high-precision, fully customized designs. The careful balance between precision and efficiency is maintained only through intimate knowledge of the physical processes, material characteristics, and technological capabilities of the equipment and workpieces involved. The best-selling first edition of Metal Cutting Theory and Practice provided such knowledge, integrating timely research with current industry practice. This brilliant reference enters its second edition with fully updated coverage, new sections, and the inclusion of examples and problems. Supplying complete, up-to-date information on machine tools, tooling, and workholding technologies, this second edition stresses a physical understanding of machining processes including forces, temperatures, and surface finish. This provides a practical basis for troubleshooting and evaluating vendor claims. In addition to updates in all chapters, the book features three new chapters on cutting fluids, agile and high-throughput machining, and design for machining. The authors also added examples and problems for additional hands-on insight. Rounding out the treatment, an entire chapter is devoted to machining economics and optimization. Endowing you with practical knowledge and a fundamental understanding of underlying physical concepts, Metal Cutting Theory and Practice, Second Edition is a necessity for designing, evaluating, purchasing, and using machine tools.
Download or read book Advances in Forming Machining and Automation written by M. S. Shunmugam and published by Springer Nature. This book was released on 2019-11-23 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume comprises select proceedings of the 7th International and 28th All India Manufacturing Technology, Design and Research conference 2018 (AIMTDR 2018). The papers in this volume focus on forming and machining, and discuss both conventional technologies and the latest developments and innovations, including both experimental studies and simulations; while those on automation present the latest research on hardware as well as software aspects. This volume will be of interest to researchers, and practicing engineers alike.
