Download or read book Advanced Well Completion Engineering written by Renpu Wan and published by Gulf Professional Publishing. This book was released on 2011-08-23 with total page 737 pages. Available in PDF, EPUB and Kindle. Book excerpt: Once a natural gas or oil well is drilled, and it has been verified that commercially viable, it must be "completed" to allow for the flow of petroleum or natural gas out of the formation and up to the surface. This process includes: casing, pressure and temperature evaluation, and the proper instillation of equipment to ensure an efficient flow out of the well. In recent years, these processes have been greatly enhanced by new technologies. Advanced Well Completion Engineering summarizes and explains these advances while providing expert advice for deploying these new breakthrough engineering systems. The book has two themes: one, the idea of preventing damage, and preventing formation from drilling into an oil formation to putting the well introduction stage; and two, the utilization of nodal system analysis method, which optimizes the pressure distribution from reservoir to well head, and plays the sensitivity analysis to design the tubing diameters first and then the production casing size, so as to achieve whole system optimization. With this book, drilling and production engineers should be able to improve operational efficiency by applying the latest state of the art technology in all facets of well completion during development drilling-completion and work over operations. - One of the only books devoted to the key technologies for all major aspects of advanced well completion activities. - Unique coverage of all aspects of well completion activities based on 25 years in the exploration, production and completion industry. - Matchless in-depth technical advice for achieving operational excellence with advance solutions.
Download or read book Well Completion Design written by Jonathan Bellarby and published by Elsevier. This book was released on 2009-04-13 with total page 726 pages. Available in PDF, EPUB and Kindle. Book excerpt: Completions are the conduit between hydrocarbon reservoirs and surface facilities. They are a fundamental part of any hydrocarbon field development project. The have to be designed for safely maximising the hydrocarbon recovery from the well and may have to last for many years under ever changing conditions. Issues include: connection with the reservoir rock, avoiding sand production, selecting the correct interval, pumps and other forms of artificial lift, safety and integrity, equipment selection and installation and future well interventions. - Course book based on course well completion design by TRACS International - Unique in its field: Coverage of offshore, subsea, and landbased completions in all of the major hydrocarbon basins of the world - Full colour
Download or read book Analysis for Well Completion written by Mark Longley and published by Petroleum Extension Service. This book was released on 1984 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This series was reviewed by a subcommittee of the API Advisory Committee for the School of Production Technology and approved by the instructor of the topic covered. Each book is divided into sections that consist of learning objectives, instructional text, and a test. A glossary and an answer key are included. Surveys standard analysis of several types of oilfield data affecting well completion. Describes the characteristics of reservoirs and their fluids, explains methods for gathering data on those characteristics, and discusses ways in which those data are interpreted.
Download or read book Well Test Analysis written by Dominique Bourdet and published by Elsevier. This book was released on 2002-08-21 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on well test analysis, and the use of advanced interpretation models is volume 3 in the series Handbook of Petroleum Exploration and Production.The chapters in the book are: Principles of Transient Testing, Analysis Methods, Wellbore Conditions, Effect of Reservoir Heterogeneities on Well Responses, Effect of Reservoir Boundaries on Well Responses, Multiple Well Testing, Application to Gas Reservoirs, Application to Multiphase Reservoirs, Special Tests, Practical Aspects of Well Test Interpretation.
Download or read book Macondo Well Deepwater Horizon Blowout written by National Research Council and published by National Academies Press. This book was released on 2012-03-02 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: The blowout of the Macondo well on April 20, 2010, led to enormous consequences for the individuals involved in the drilling operations, and for their families. Eleven workers on the Deepwater Horizon drilling rig lost their lives and 16 others were seriously injured. There were also enormous consequences for the companies involved in the drilling operations, to the Gulf of Mexico environment, and to the economy of the region and beyond. The flow continued for nearly 3 months before the well could be completely killed, during which time, nearly 5 million barrels of oil spilled into the gulf. Macondo Well-Deepwater Horizon Blowout examines the causes of the blowout and provides a series of recommendations, for both the oil and gas industry and government regulators, intended to reduce the likelihood and impact of any future losses of well control during offshore drilling. According to this report, companies involved in offshore drilling should take a "system safety" approach to anticipating and managing possible dangers at every level of operation-from ensuring the integrity of wells to designing blowout preventers that function under all foreseeable conditions-in order to reduce the risk of another accident as catastrophic as the Deepwater Horizon explosion and oil spill. In addition, an enhanced regulatory approach should combine strong industry safety goals with mandatory oversight at critical points during drilling operations. Macondo Well-Deepwater Horizon Blowout discusses ultimate responsibility and accountability for well integrity and safety of offshore equipment, formal system safety education and training of personnel engaged in offshore drilling, and guidelines that should be established so that well designs incorporate protection against the various credible risks associated with the drilling and abandonment process. This book will be of interest to professionals in the oil and gas industry, government decision makers, environmental advocacy groups, and others who seek an understanding of the processes involved in order to ensure safety in undertakings of this nature.
Download or read book Composition and Properties of Drilling and Completion Fluids written by Ryen Caenn and published by Gulf Professional Publishing. This book was released on 2011-09-29 with total page 721 pages. Available in PDF, EPUB and Kindle. Book excerpt: The petroleum industry in general has been dominated by engineers and production specialists. The upstream segment of the industry is dominated by drilling/completion engineers. Usually, neither of those disciplines have a great deal of training in the chemistry aspects of drilling and completing a well prior to its going on production. The chemistry of drilling fluids and completion fluids have a profound effect on the success of a well. For example, historically the drilling fluid costs to drill a well have averaged around 7% of the overall cost of the well, before completion. The successful delivery of up to 100% of that wellbore, in many cases may be attributable to the fluid used. Considered the "bible" of the industry, Composition and Properties of Drilling and Completion Fluids, first written by Walter Rogers in 1948, and updated on a regular basis thereafter, is a key tool to achieving successful delivery of the wellbore. In its Sixth Edition, Composition and Properties of Drilling and Completion Fluids has been updated and revised to incorporate new information on technology, economic, and political issues that have impacted the use of fluids to drill and complete oil and gas wells. With updated content on Completion Fluids and Reservoir Drilling Fluids, Health, Safety & Environment, Drilling Fluid Systems and Products, new fluid systems and additives from both chemical and engineering perspectives, Wellbore Stability, adding the new R&D on water-based muds, and with increased content on Equipment and Procedures for Evaluating Drilling Fluid Performance in light of the advent of digital technology and better manufacturing techniques, Composition and Properties of Drilling and Completion Fluids has been thoroughly updated to meet the drilling and completion engineer's needs. - Explains a myriad of new products and fluid systems - Cover the newest API/SI standards - New R&D on water-based muds - New emphases on Health, Safety & Environment - New Chapter on waste management and disposal
Download or read book An Analysis of the Feasibility of Separating Exploration from Production of Oil and Gas on the Outer Condinental Shelf written by United States. Congress. Office of Technology Assessment and published by . This book was released on 1975 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Sand Control in Well Construction and Operation written by Davorin Matanovic and published by Springer Science & Business Media. This book was released on 2012-02-21 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Produced sand causes a lot of problems. From that reasons sand production must be monitored and kept within acceptable limits. Sand control problems in wells result from improper completion techniques or changes in reservoir properties. The idea is to provide support to the formation to prevent movement under stresses resulting from fluid flow from reservoir to well bore. That means that sand control often result with reduced well production. Control of sand production is achieved by: reducing drag forces (the cheapest and most effective method), mechanical sand bridging (screens, gravel packs) and increasing of formation strength (chemical consolidation). For open hole completions or with un-cemented slotted liners/screens sand failure will occur and must be predicted. Main problem is plugging. To combat well failures due to plugging and sand breakthrough Water-Packing or Shunt-Packing are used.
Download or read book Wireline Formation Testing Well Deliverability written by George Stewart and published by Pennwell Books. This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern reservoir engineering must accommodate for a complex set of heterogeneous phases contained in the well and petroleum reservoir. Achieving the optimal solution to reservoir problems involves employing sophisticated simulation techniques, executing complex well-completion actions and following up with constant attention to the changes within a reservoir. Renowned petroleum engineer George Stewart offers in-depth information in his latest book, Wireline Formation Testing and Well Deliverability. A companion to his recent book, Well Test Design & Analysis, this newest technical volume covers the widest range of possible issues for reservoir engineering. Stewart's exhaustive explanations include the nuances of radial flow theory, examples of when to run production logs, and to well testing for drawdown in a commingled reservoir. The volume includes a CD containing chapters 13-17.
Download or read book Drilling and Completion in Petroleum Engineering written by Xinpu Shen and published by CRC Press. This book was released on 2011-10-19 with total page 247 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern petroleum and petrotechnical engineering is increasingly challenging due to the inherently scarce and decreasing number of global petroleum resources. Exploiting these resources efficiently will require researchers, scientists, engineers and other practitioners to develop innovative mathematical solutions to serve as basis for new asset deve
Download or read book Introduction to Permanent Plug and Abandonment of Wells written by Mahmoud Khalifeh and published by Springer Nature. This book was released on 2020-01-27 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book offers a timely guide to challenges and current practices to permanently plug and abandon hydrocarbon wells. With a focus on offshore North Sea, it analyzes the process of plug and abandonment of hydrocarbon wells through the establishment of permanent well barriers. It provides the reader with extensive knowledge on the type of barriers, their functioning and verification. It then discusses plug and abandonment methodologies, analyzing different types of permanent plugging materials. Last, it describes some tests for verifying the integrity and functionality of installed permanent barriers. The book offers a comprehensive reference guide to well plugging and abandonment (P&A) and well integrity testing. The book also presents new technologies that have been proposed to be used in plugging and abandoning of wells, which might be game-changing technologies, but they are still in laboratory or testing level. Given its scope, it addresses students and researchers in both academia and industry. It also provides information for engineers who work in petroleum industry and should be familiarized with P&A of hydrocarbon wells to reduce the time of P&A by considering it during well planning and construction.
Download or read book Gas Well Deliquification written by James F. Lea Jr. and published by Gulf Professional Publishing. This book was released on 2011-08-30 with total page 605 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid loading can reduce production and shorten the lifecycle of a well costing a company millions in revenue. A handy guide on the latest techniques, equipment, and chemicals used in de-watering gas wells, Gas Well Deliquification, 2nd Edition continues to be the engineer's choice for recognizing and minimizing the effects of liquid loading. The 2nd Edition serves as a guide discussing the most frequently used methods and tools used to diagnose liquid loading problems and reduce the detrimental effects of liquid loading on gas production. With new extensive chapters on Coal Bed Methane and Production this is the essential reference for operating engineers, reservoir engineers, consulting engineers and service companies who supply gas well equipment. It provides managers with a comprehensive look into the methods of successful Production Automation as well as tools for the profitable use, production and supervision of coal bed gases. - Turnkey solutions for the problems of liquid loading interference - Based on decades of practical, easy to use methods of de-watering gas wells - Expands on the 1st edition's useful reference with new methods for utilizing Production Automation and managing Coal Bed Methane
Download or read book Petroleum Rock Mechanics written by Bernt S. Aadnoy and published by Gulf Professional Publishing. This book was released on 2011-05-26 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pt. 1. Fundamentals of solid mechanics -- pt. 2. Petroleum rock mechanics.
Download or read book Geothermal Well Test Analysis written by Sadiq J. Zarrouk and published by Academic Press. This book was released on 2019-05-16 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geothermal Well Test Analysis: Fundamentals, Applications and Advanced Techniques provides a comprehensive review of the geothermal pressure transient analysis methodology and its similarities and differences with petroleum and groundwater well test analysis. Also discussed are the different tests undertaken in geothermal wells during completion testing, output/production testing, and the interpretation of data. In addition, the book focuses on pressure transient analysis by numerical simulation and inverse methods, also covering the familiar pressure derivative plot. Finally, non-standard geothermal pressure transient behaviors are analyzed and interpreted by numerical techniques for cases beyond the limit of existing analytical techniques. Provides a guide on the analysis of well test data in geothermal wells, including pressure transient analysis, completion testing and output testing Presents practical information on how to avoid common issues with data collection in geothermal wells Uses SI units, converting existing equations and models found in literature to this unit system instead of oilfield units
Download or read book Petroleum Production Operations written by Lewis W. Hall and published by Burgess International Group Incorporated. This book was released on 1986 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: For those with technical expertise between novice and professional. Covers petroleum reservoirs and drive mechanisms, well completion, well performance evaluation, primary cementing, perforating, squeeze cementing, packer and tubing forces, problem well analysis, workover methods, workover planning, and beam pumping. A must for every lease operator or supervisor.
Download or read book Well Logging and Formation Evaluation written by Toby Darling and published by Elsevier. This book was released on 2005-05-26 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: This hand guide in the Gulf Drilling Guides series offers practical techniques that are valuable to petrophysicists and engineers in their day-to-day jobs. Based on the author's many years of experience working in oil companies around the world, this guide is a comprehensive collection of techniques and rules of thumb that work.The primary functions of the drilling or petroleum engineer are to ensure that the right operational decisions are made during the course of drilling and testing a well, from data gathering, completion and testing, and thereafter to provide the necessary parameters to enable an accurate static and dynamic model of the reservoir to be constructed. This guide supplies these, and many other, answers to their everyday problems. There are chapters on NMR logging, core analysis, sampling, and interpretation of the data to give the engineer a full picture of the formation. There is no other single guide like this, covering all aspects of well logging and formation evaluation, completely updated with the latest techniques and applications.·A valuable reference dedicated solely to well logging and formation evaluation.·Comprehensive coverage of the latest technologies and practices, including, troubleshooting for stuck pipe, operational decisions, and logging contracts.·Packed with money-saving and time saving strategies for the engineer working in the field.
Download or read book Oil and Gas Production Handbook An Introduction to Oil and Gas Production written by Havard Devold and published by Lulu.com. This book was released on 2013 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
