Download or read book Analysis Design and Applications of Switched capacitor Converters written by Chun Kit Cheung and published by . This book was released on 2016 with total page 171 pages. Available in PDF, EPUB and Kindle. Book excerpt: Second, a universal SC converter capable of achieving DC-DC, AC-DC and DC-AC power conversions is proposed. Previous SC converters are designed and are only applicable to some particular applications, which are unsuitable for application in situations requiring multi-purpose power conversions. A multi conversion purpose SC converter can resolve the problem. Detailed circuit operations on each type of power conversions are described. The control methodology of the overall system is explained. The required circuitries for programming the control sequence of power switches for achieving various types of power conversions are given. Simulations have been performed to a preliminary proof of the proposed idea. An experimental prototype has been built to demonstrate the proposed idea. It is shown that different types of power conversions can be achieved by only adjusting the control signals of power MOSFETs. Both line and load regulations capabilities, efficiency analysis, and dynamic response under the step change of the load current of the proposed converter are discussed. Third, a multi-port SC converter is introduced for multiple sources or loads applications. Due to the distributed energy resources (DER) characteristic in renewable energy systems, multiple converters are required for different power conversions in the entire system. An alternative approach is proposed to resolve the aforementioned problem, which is through the means of using a multi-port SC converter. The multi-port structure of the proposed SC converter allows the connections of different power sources or loads to a single SC converter, while different power conversions among the connected sources and loads can be performed. An example of an energy system having photovoltaic (PV) panel, battery, and AC voltage grid is considered to discuss the feasibility of the proposed converter. Three different operating modes, including the battery recharging by the PV panel or the AC voltage source, and the AC voltage generation from the PV panel, are defined. Detailed explanations on different operating modes and the overall control methodology are given. Simulation results and experimental verifications, including the line and load regulation capabilities, the efficiency analysis, and the transient response, are given. It has been shown that different power conversions among the connected sources or loads can be readily achieved by using only a single SC converter. This thesis contains seven chapters. The first three chapters give respectively the introduction of the thesis, a literature review on the previous works, and an overview of the SC converters. The accomplished research works in this study are discussed in Chapters 4-6. The objective, theoretical analysis, and experimental verifications of each work are included. The last chapter gives a conclusion to the thesis and a discussion on some possible future works.

Download or read book Reconfigurable Switched Capacitor Power Converters written by Dongsheng Ma and published by Springer Science & Business Media. This book was released on 2012-07-25 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers specializing in ultra-low power supply design for self-powered applications an invaluable reference on reconfigurable switched capacitor power converters. Readers will benefit from a comprehensive introduction to the design of robust power supplies for energy harvesting and self-power applications, focusing on the use of reconfigurable switched capacitor based DC-DC converters, which is ideal for such applications. Coverage includes all aspects of switched capacitor power supply designs, from fundamentals, to reconfigurable power stages, and sophisticated controller designs.

Download or read book Demystifying Switched Capacitor Circuits written by Mingliang (Michael) Liu and published by Elsevier. This book was released on 2006-06-12 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book helps engineers to grasp fundamental theories and design principles by presenting physical and intuitive explanations of switched-capacitor circuits. Numerous circuit examples are discussed and the author emphasizes the most important and fundamental principles involved in implementing state-of-the-art switched-capacitor circuits for analog signal processing and power management applications. Throughout the book, the author presents numerous step-by-step tutorials and gives practical design examples.While some quantitative analysis is necessary to understand underlying concepts, tedious mathematical equations and formal proofs are avoided. An intuitive appreciation for switched-capacitor circuits is achieved.Much of the existing information on contemporary switched-capacitor circuit applications is in the form of applications notes and data sheets for various switched-capacitor ICs. This book compiles such information in a single volume and coherently organizes and structures it.The author has his own website at www.mingliangliu.com * Step-by-step tutorials which emphasize the most fundamental principals of switched-capacitor circuits * Few tedious mathematical equations * The first easy-to-understand compilation on this subject--most information available is not very cohesive

Download or read book Advanced Multiphasing Switched Capacitor DC DC Converters written by Nicolas Butzen and published by Springer Nature. This book was released on 2020-07-03 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives a detailed analysis of switched-capacitor DC-DC converters that are entirely integrated on a single chip and establishes that these converters are mainly limited by the large parasitic coupling, the low capacitor energy density, and the fact that switched-capacitor converter topologies only have a fixed voltage conversion ratio. The authors introduce the concept of Advanced Multiphasing as a way to circumvent these limitations by having multiple out-of-phase parallel converter cores interact with each other to minimize capacitor charging losses, leading to several techniques that demonstrate record efficiency and power-density, and even a fundamentally new type of switched-capacitor topology that has a continuously-scalable conversion ratio. Provides single-source reference to the recently-developed Advanced Multiphasing concept; Enables greatly improved performance and capabilities in fully integrated switched-capacitor converters; Enables readers to design DC-DC converters, where multiple converter cores are put in parallel and actively interact with each other over several phases to improve their capabilities.

Download or read book Switched Capacitor Techniques for High Accuracy Filter and ADC Design written by Patrick J. Quinn and published by Springer Science & Business Media. This book was released on 2007-07-20 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book proposes alternative switched capacitor techniques which allow the achievement of higher intrinsic analogue functional accuracy than previously possible in such application areas as analogue filter and ADC design. The validity of the concepts developed and analyzed in Switched-Capacitor Techniques for High-Accuracy Filter and ADC Design has been demonstrated in practice with the design of CMOS SC bandpass filters and algorithmic ADC stages.

Download or read book On the Design of Switched Capacitor Converters for Low Power Applications written by Yaqub Alhussain Mahnashi and published by . This book was released on 2018 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Analysis and Design of High Power Density Resonant Switched capacitor Converters written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book MOS Switched Capacitor and Continuous Time Integrated Circuits and Systems written by Rolf Unbehauen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 645 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to present analysis and design principles, procedures and techniques of analog integrated circuits which are to be implemented in MOS (metal oxide semiconductor) technology. MOS technology is becoming dominant in the realization of digital systems, and its use for analog circuits opens new pos sibilities for the design of complex mixed analog/digital VLSI (very large scale in tegration) chips. Although we are focusing attention in this book principally on circuits and systems which can be implemented in CMOS technology, many con siderations and structures are of a general nature and can be adapted to other promising and emerging technologies, namely GaAs (Gallium Arsenide) and BI MOS (bipolar MOS, i. e. circuits which combine both bipolar and CMOS devices) technology. Moreover, some of the structures and circuits described in this book can also be useful without integration. In this book we describe two large classes of analog integrated circuits: • switched capacitor (SC) networks, • continuous-time CMOS (unswitched) circuits. SC networks are sampled-data systems in which electric charges are transferred from one point to another at regular discrete intervals of time and thus the signal samples are stored and processed. Other circuits belonging to this class of sampled-data systems are charge transfer devices (CTD) and charge coupled dev ices (CCD). In contrast to SC circuits, continuous-time CMOS circuits operate continuously in time. They can be considered as subcircuits or building blocks (e. g.

Download or read book Design of Low Voltage Low Power CMOS Delta Sigma A D Converters written by Vincenzo Peluso and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of Low-Voltage Low-Power CMOS Delta-Sigma A/D Converters investigates the feasibility of designing Delta-Sigma Analog to Digital Converters for very low supply voltage (lower than 1.5V) and low power operation in standard CMOS processes. The chosen technique of implementation is the Switched Opamp Technique which provides Switched Capacitor operation at low supply voltage without the need to apply voltage multipliers or low VtMOST devices. A method of implementing the classic single loop and cascaded Delta-Sigma modulator topologies with half delay integrators is presented. Those topologies are studied in order to find the parameters that maximise the performance in terms of peak SNR. Based on a linear model, the performance degradations of higher order single loop and cascaded modulators, compared to a hypothetical ideal modulator, are quantified. An overview of low voltage Switched Capacitor design techniques, such as the use of voltage multipliers, low VtMOST devices and the Switched Opamp Technique, is given. An in-depth discussion of the present status of the Switched Opamp Technique covers the single-ended Original Switched Opamp Technique, the Modified Switched Opamp Technique, which allows lower supply voltage operation, and differential implementation including common mode control techniques. The restrictions imposed on the analog circuits by low supply voltage operation are investigated. Several low voltage circuit building blocks, some of which are new, are discussed. A new low voltage class AB OTA, especially suited for differential Switched Opamp applications, together with a common mode feedback amplifier and a comparator are presented and analyzed. As part of a systematic top-down design approach, the non-ideal charge transfer of the Switched Opamp integrator cell is modeled, based upon several models of the main opamp non-ideal characteristics. Behavioral simulations carried out with these models yield the required opamp specifications that ensure that the intended performance is met in an implementation. A power consumption analysis is performed. The influence of all design parameters, especially the low power supply voltage, is highlighted. Design guidelines towards low power operation are distilled. Two implementations are presented together with measurement results. The first one is a single-ended implementation of a Delta-Sigma ADC operating with 1.5V supply voltage and consuming 100 &mgr;W for a 74 dB dynamic range in a 3.4 kHz bandwidth. The second implementation is differential and operates with 900 mV. It achieves 77 dB dynamic range in 16 kHz bandwidth and consumes 40 &mgr;W. Design of Low-Voltage Low-Power CMOS Delta-Sigma A/D Converters is essential reading for analog design engineers and researchers.

Download or read book Power Switching Converters Second Edition written by Simon Ang and published by CRC Press. This book was released on 2005-03-17 with total page 574 pages. Available in PDF, EPUB and Kindle. Book excerpt: After nearly a decade of success owing to its thorough coverage, abundance of problems and examples, and practical use of simulation and design, Power-Switching Converters enters its second edition with new and updated material, entirely new design case studies, and expanded figures, equations, and homework problems. This textbook is ideal for senior undergraduate or graduate courses in power electronic converters, requiring only systems analysis and basic electronics courses. The only text of such detail to also include the use of PSpice and step-by-step designs and simulations, Power-Switching Converters, Second Edition covers basic topologies, basic control techniques, and closed-loop control and stability. It also includes two new chapters on interleaved converters and switched capacitor converters, and the authors have added discrete-time modeling to the dynamic analysis of switching converters. The final two chapters are dedicated to simulation and complete design examples, respectively. PSpice examples and MATLAB scripts are available for download from the CRC Web site. These are useful for the simulation of students' designs. Class slides are also available on the Internet. Instructors will appreciate the breadth and depth of the material, more than enough to adapt into a customized syllabus. Students will similarly benefit from the more than 440 figures and over 1000 equations, ample homework problems, and case studies presented in this book.

Download or read book Switch Mode Power Converters written by Keng C. Wu and published by Elsevier. This book was released on 2005-12-01 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Switch-Mode Power Converters introduces an innovative, highly analytical approach to symbolic, closed-form solutions for switched-mode power converter circuits. This is a highly relevant topic to power electronics students and professionals who are involved in the design and analysis of electrical power converters. The author uses extensive equations to explain how solid-state switches convert electrical voltages from one level to another, so that electronic devices (e.g., audio speakers, CD players, DVD players, etc.) can use different voltages more effectively to perform their various functions. Most existing comparable books published as recently as 2002 do not discuss closed-loop operations, nor do they provide either DC closed-loop regulation equations or AC loop gain (stability) formulae. The author Wu, a leading engineer at Lockheed Martin, fills this gap and provides among the first descriptions of how error amplifiers are designed in conjunction with closed-loop bandwidth selection. BENEFIT TO THE READER: Readers will gain a mathematically rigorous introduction to numerous, closed-form solutions that are readily applicable to the design and development of various switch-mode power converters. - Provides symbolic, closed-form solutions for DC and AC studies - Provides techniques for expressing close-loop operation - Gives readers the ability to perform closed-loop regulation and sensitivity studies - Gives readers the ability to design error amplifiers with precision - Employs the concept of the continuity of states in matrix form - Gives accelerated time-domain, steady-state studies using Laplace transform - Gives accelerated time-domain studies using state transition - Extensive use of matrix, linear algebra, implicit functions, and Jacobian determinants - Enables the determination of power stage gain that otherwise could not be obtained

Download or read book Analysis and Design of a Power Switched capacitor Dc dc Voltage Converter written by William Scott Harris and published by . This book was released on 1997 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ultra Capacitors in Power Conversion Systems written by Petar J. Grbovic and published by John Wiley & Sons. This book was released on 2013-10-23 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultra-capacitors, used as short-term energy storage devices, are growing in popularity especially in the transportation and renewable energy sectors. This text provides an up-to-date and comprehensive analysis of ultra-capacitor theory, modeling and module design from an application perspective, focusing on the practical aspects of power conversion and ultra-capacitor integration with power electronics systems. Key features: clearly explains the theoretical and practical aspects of ultra-capacitor, analysis, modelling and design describes different power conversion applications such as variable speed drives, renewable energy systems, traction, power quality, diesel electric hybrid applications provides detailed guidelines for the design and selection of ultra-capacitor modules and interface dc-dc converters includes end-of-chapter exercises and design examples This is an essential reference for power electronics engineers and professionals wanting to expand their knowledge of advanced ultra-capacitor energy storage devices and their application in power conversion. It is also a valuable resource for industrial design engineers as well as academics and advanced students in power electronics who want to develop their understanding about this highly topical subject.

Download or read book Switched currents written by Chris Toumazou and published by IET. This book was released on 1993 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analogue designers from industry and academia worldwide have contributed to this first volume devoted entirely to switched-current analogue signal processing. The volume introduces the basic switched- current technique, reviews the state-of-the-art, and presents practical chip examples. Numerous application areas are described, ranging from filters and data converters to image processing applications. It also gives a comprehensive treatment of the fundamental principles of switched-current circuits and systems. For undergraduate and graduate students and practicing engineers in industry. Distributed by INSPEC. Annotation copyright by Book News, Inc., Portland, OR

Download or read book Equivalent Small Parameter Analysis of DC DC Switched Mode Converter written by Yanfeng Chen and published by Springer. This book was released on 2018-10-06 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the applications of Equivalent-Small-Parameter Method (ESPM) in solving the steady-state periodic solutions, as well as stability analysis, of kinds of open-loop or closed-loop operated DC/DC converters, such as PWM, quasi-resonant and resonant ones. The analytical expressions of DC components and harmonics of state variables (inductor current and capacitor voltage) with DC/DC converters can be obtained by ESPM, which can be helpful to understand the nonlinear operating mechanism of switched-mode converters. It can also be useful for stability analysis and design for practical converters. Modeling and analysis on all kinds of DC/DC converters are introduced in detail in this book, along with a large amount of simulation or experimental waveforms to verify the correctness of the theoretical analysis based on ESPM.

Download or read book Switched Capacitor Techniques for High Accuracy Filter and ADC Design written by Patrick J. Quinn and published by Springer. This book was released on 2009-09-03 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book proposes alternative switched capacitor techniques which allow the achievement of higher intrinsic analogue functional accuracy than previously possible in such application areas as analogue filter and ADC design. The validity of the concepts developed and analyzed in Switched-Capacitor Techniques for High-Accuracy Filter and ADC Design has been demonstrated in practice with the design of CMOS SC bandpass filters and algorithmic ADC stages.

Download or read book Power Electronics and Energy Conversion Systems Fundamentals and Hard switching Converters written by Adrian Ioinovici and published by John Wiley & Sons. This book was released on 2013-04-02 with total page 1 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Electronics and Energy Conversion Systems is a definitive five-volume reference spanning classical theory through practical applications and consolidating the latest advancements in energy conversion technology. Comprehensive yet highly accessible, each volume is organised in a basic-to-sophisticated crescendo, providing a single-source reference for undergraduate and graduate students, researchers and designers. Volume 1 Fundamentals and Hard-switching Converters introduces the key challenges in power electronics from basic components to operation principles and presents classical hard- and soft-switching DC to DC converters, rectifiers and inverters. At a more advanced level, it provides comprehensive analysis of DC and AC models comparing the available approaches for their derivation and results. A full treatment of DC to DC hard-switching converters is given, from fundamentals to modern industrial solutions and practical engineering insight. The author elucidates various contradictions and misunderstandings in the literature, for example, in the treatment of the discontinuous conduction operation or in deriving AC small-signal models of converters. Other key features: • Consolidates the latest advancements in hard-switching converters including discontinuous capacitor voltage mode, and their use in power-factor-correction applications • Includes fully worked design examples, exercises, and case studies, with discussion of the practical consequences of each choice made during the design • Explains all topics in detail with step-by-step derivation of formulas appropriate for energy conversion courses • End-of-section review of the learned material • Includes topics treated in recent journal, conference and industry application coverage on solutions, theory and practical concerns With emphasis on clear explanation, the text offers both a thorough understanding of DC to DC converters for undergraduate and graduate students in power electronics, and more detailed material suitable for researchers, designers and practising engineers working on the development and design of power electronics. This is an accessible reference for engineering and procurement managers from industries such as consumer electronics, integrated circuits, aerospace and renewable energy.