Download or read book Analysis Characterization of 600V Integrated DMOSFET merged Pin Schottky Rectifier Devices written by Jun Ruan and published by . This book was released on 2004 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Silicon Carbide Technology written by Tsunenobu Kimoto and published by John Wiley & Sons. This book was released on 2014-11-24 with total page 565 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction and up-to-date reference to SiC power semiconductor devices covering topics from material properties to applications Based on a number of breakthroughs in SiC material science and fabrication technology in the 1980s and 1990s, the first SiC Schottky barrier diodes (SBDs) were released as commercial products in 2001. The SiC SBD market has grown significantly since that time, and SBDs are now used in a variety of power systems, particularly switch-mode power supplies and motor controls. SiC power MOSFETs entered commercial production in 2011, providing rugged, high-efficiency switches for high-frequency power systems. In this wide-ranging book, the authors draw on their considerable experience to present both an introduction to SiC materials, devices, and applications and an in-depth reference for scientists and engineers working in this fast-moving field. Fundamentals of Silicon Carbide Technology covers basic properties of SiC materials, processing technology, theory and analysis of practical devices, and an overview of the most important systems applications. Specifically included are: A complete discussion of SiC material properties, bulk crystal growth, epitaxial growth, device fabrication technology, and characterization techniques. Device physics and operating equations for Schottky diodes, pin diodes, JBS/MPS diodes, JFETs, MOSFETs, BJTs, IGBTs, and thyristors. A survey of power electronics applications, including switch-mode power supplies, motor drives, power converters for electric vehicles, and converters for renewable energy sources. Coverage of special applications, including microwave devices, high-temperature electronics, and rugged sensors. Fully illustrated throughout, the text is written by recognized experts with over 45 years of combined experience in SiC research and development. This book is intended for graduate students and researchers in crystal growth, material science, and semiconductor device technology. The book is also useful for design engineers, application engineers, and product managers in areas such as power supplies, converter and inverter design, electric vehicle technology, high-temperature electronics, sensors, and smart grid technology.
Download or read book Advanced Power MOSFET Concepts written by B. Jayant Baliga and published by Springer Science & Business Media. This book was released on 2010-06-26 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last decade many new concepts have been proposed for improving the performance of power MOSFETs. The results of this research are dispersed in the technical literature among journal articles and abstracts of conferences. Consequently, the information is not readily available to researchers and practicing engineers in the power device community. There is no cohesive treatment of the ideas to provide an assessment of the relative merits of the ideas. "Advanced Power MOSFET Concepts" provides an in-depth treatment of the physics of operation of advanced power MOSFETs. Analytical models for explaining the operation of all the advanced power MOSFETs will be developed. The results of numerical simulations will be provided to give additional insight into the device physics and validate the analytical models. The results of two-dimensional simulations will be provided to corroborate the analytical models and give greater insight into the device operation.
Download or read book Advanced Silicon Carbide Devices and Processing written by Stephen Saddow and published by BoD – Books on Demand. This book was released on 2015-09-17 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the production of the first commercially available blue LED in the late 1980s, silicon carbide technology has grown into a billion-dollar industry world-wide in the area of solid-state lighting and power electronics. With this in mind we organized this book to bring to the attention of those well versed in SiC technology some new developments in the field with a particular emphasis on particularly promising technologies such as SiC-based solar cells and optoelectronics. We have balanced this with the more traditional subjects such as power electronics and some new developments in the improvement of the MOS system for SiC MOSFETS. Given the importance of advanced microsystems and sensors based on SiC, we also included a review on 3C-SiC for both microsystem and electronic applications.
Download or read book Power GaN Devices written by Matteo Meneghini and published by Springer. This book was released on 2016-09-08 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the first comprehensive overview of the properties and fabrication methods of GaN-based power transistors, with contributions from the most active research groups in the field. It describes how gallium nitride has emerged as an excellent material for the fabrication of power transistors; thanks to the high energy gap, high breakdown field, and saturation velocity of GaN, these devices can reach breakdown voltages beyond the kV range, and very high switching frequencies, thus being suitable for application in power conversion systems. Based on GaN, switching-mode power converters with efficiency in excess of 99 % have been already demonstrated, thus clearing the way for massive adoption of GaN transistors in the power conversion market. This is expected to have important advantages at both the environmental and economic level, since power conversion losses account for 10 % of global electricity consumption. The first part of the book describes the properties and advantages of gallium nitride compared to conventional semiconductor materials. The second part of the book describes the techniques used for device fabrication, and the methods for GaN-on-Silicon mass production. Specific attention is paid to the three most advanced device structures: lateral transistors, vertical power devices, and nanowire-based HEMTs. Other relevant topics covered by the book are the strategies for normally-off operation, and the problems related to device reliability. The last chapter reviews the switching characteristics of GaN HEMTs based on a systems level approach. This book is a unique reference for people working in the materials, device and power electronics fields; it provides interdisciplinary information on material growth, device fabrication, reliability issues and circuit-level switching investigation.
Download or read book Advanced Power Rectifier Concepts written by B. Jayant Baliga and published by Springer Science & Business Media. This book was released on 2009-06-16 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last decade, many new concepts have been proposed for improving the performance of power rectifiers and transistors. The results of this research are dispersed in the technical literature among journal articles and abstracts of conferences. Consequently, the information is not readily available to researchers and practicing engineers in the power device community. There is no cohesive treatment of the ideas to provide an assessment of the relative merits of the ideas. Advanced Power Rectifier Concepts provides an in-depth treatment of the physics of operation of advanced power rectifiers. Analytical models for explaining the operation of all the advanced power rectifier devices will be developed. The results off numerical simulations will be provided to provide additional insight into the device physics and validate the analytical models. The results of two-dimensional simulations will be provided to corroborate the analytical models and provide greater insight into the device operation.
Download or read book CMOS written by R. Jacob Baker and published by John Wiley & Sons. This book was released on 2008 with total page 1074 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition provides an important contemporary view of a wide range of analog/digital circuit blocks, the BSIM model, data converter architectures, and more. The authors develop design techniques for both long- and short-channel CMOS technologies and then compare the two.
Download or read book Fundamentals of Power Semiconductor Devices written by B. Jayant Baliga and published by Springer. This book was released on 2018-09-28 with total page 1114 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Power Semiconductor Devices provides an in-depth treatment of the physics of operation of power semiconductor devices that are commonly used by the power electronics industry. Analytical models for explaining the operation of all power semiconductor devices are shown. The treatment here focuses on silicon devices but includes the unique attributes and design requirements for emerging silicon carbide devices. The book will appeal to practicing engineers in the power semiconductor device community.
Download or read book Power Electronics Device Applications of Diamond Semiconductors written by Satoshi Koizumi and published by Woodhead Publishing. This book was released on 2018-06-29 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Electronics Device Applications of Diamond Semiconductors presents state-of-the-art research on diamond growth, doping, device processing, theoretical modeling and device performance. The book begins with a comprehensive and close examination of diamond crystal growth from the vapor phase for epitaxial diamond and wafer preparation. It looks at single crystal vapor deposition (CVD) growth sectors and defect control, ultra high purity SC-CVD, SC diamond wafer CVD, heteroepitaxy on Ir/MqO and needle-induced large area growth, also discussing the latest doping and semiconductor characterization methods, fundamental material properties and device physics. The book concludes with a discussion of circuits and applications, featuring the switching behavior of diamond devices and applications, high frequency and high temperature operation, and potential applications of diamond semiconductors for high voltage devices. Includes contributions from today's most respected researchers who present the latest results for diamond growth, doping, device fabrication, theoretical modeling and device performance Examines why diamond semiconductors could lead to superior power electronics Discusses the main challenges to device realization and the best opportunities for the next generation of power electronics
Download or read book Encyclopedia of Electronic Components Volume 1 written by Charles Platt and published by "O'Reilly Media, Inc.". This book was released on 2012-10-26 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Power sources & conversion: resistors, capacitors, inductors, switches, encoders, relays, transistors"--Cover.
Download or read book Power Electronics Handbook written by Muhammad H. Rashid and published by Elsevier. This book was released on 2010-07-19 with total page 1189 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power electronics, which is a rapidly growing area in terms of research and applications, uses modern electronics technology to convert electric power from one form to another, such as ac-dc, dc-dc, dc-ac, and ac-ac with a variable output magnitude and frequency. Power electronics has many applications in our every day life such as air-conditioners, electric cars, sub-way trains, motor drives, renewable energy sources and power supplies for computers. This book covers all aspects of switching devices, converter circuit topologies, control techniques, analytical methods and some examples of their applications. * 25% new content* Reorganized and revised into 8 sections comprising 43 chapters* Coverage of numerous applications, including uninterruptable power supplies and automotive electrical systems* New content in power generation and distribution, including solar power, fuel cells, wind turbines, and flexible transmission
Download or read book Practical Electronics for Inventors 2 E written by Paul Scherz and published by McGraw Hill Professional. This book was released on 2006-12-05 with total page 977 pages. Available in PDF, EPUB and Kindle. Book excerpt: THE BOOK THAT MAKES ELECTRONICS MAKE SENSE This intuitive, applications-driven guide to electronics for hobbyists, engineers, and students doesn't overload readers with technical detail. Instead, it tells you-and shows you-what basic and advanced electronics parts and components do, and how they work. Chock-full of illustrations, Practical Electronics for Inventors offers over 750 hand-drawn images that provide clear, detailed instructions that can help turn theoretical ideas into real-life inventions and gadgets. CRYSTAL CLEAR AND COMPREHENSIVE Covering the entire field of electronics, from basics through analog and digital, AC and DC, integrated circuits (ICs), semiconductors, stepper motors and servos, LCD displays, and various input/output devices, this guide even includes a full chapter on the latest microcontrollers. A favorite memory-jogger for working electronics engineers, Practical Electronics for Inventors is also the ideal manual for those just getting started in circuit design. If you want to succeed in turning your ideas into workable electronic gadgets and inventions, is THE book. Starting with a light review of electronics history, physics, and math, the book provides an easy-to-understand overview of all major electronic elements, including: Basic passive components o Resistors, capacitors, inductors, transformers o Discrete passive circuits o Current-limiting networks, voltage dividers, filter circuits, attenuators o Discrete active devices o Diodes, transistors, thrysistors o Microcontrollers o Rectifiers, amplifiers, modulators, mixers, voltage regulators ENTHUSIASTIC READERS HELPED US MAKE THIS BOOK EVEN BETTER This revised, improved, and completely updated second edition reflects suggestions offered by the loyal hobbyists and inventors who made the first edition a bestseller. Reader-suggested improvements in this guide include: Thoroughly expanded and improved theory chapter New sections covering test equipment, optoelectronics, microcontroller circuits, and more New and revised drawings Answered problems throughout the book Practical Electronics for Inventors takes you through reading schematics, building and testing prototypes, purchasing electronic components, and safe work practices. You'll find all thisin a guide that's destined to get your creative-and inventive-juices flowing.
Download or read book Power Electronics written by Issa Batarseh and published by Springer. This book was released on 2017-12-22 with total page 689 pages. Available in PDF, EPUB and Kindle. Book excerpt: This fully updated textbook provides complete coverage of electrical circuits and introduces students to the field of energy conversion technologies, analysis and design. Chapters are designed to equip students with necessary background material in such topics as devices, switching circuit analysis techniques, converter types, and methods of conversion. The book contains a large number of examples, exercises, and problems to help enforce the material presented in each chapter. A detailed discussion of resonant and softswitching dc-to-dc converters is included along with the addition of new chapters covering digital control, non-linear control, and micro-inverters for power electronics applications. Designed for senior undergraduate and graduate electrical engineering students, this book provides students with the ability to analyze and design power electronic circuits used in various industrial applications.
Download or read book Power Supplies for LED Driving written by Steve Winder and published by Newnes. This book was released on 2016-12-28 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Power Supplies for LED Driving, Second Edition explores the wide use of light-emitting diodes due to their efficient use of power. The applications for power LEDs include traffic lights, street lamps, automotive lighting, architectural lights, theatre lighting, household light replacements, signage lighting (replacing neon strip lights and fluorescent tubes), LCD display backlighting, and many more. Powering (driving) these LED's is not always simple. Linear driving is inefficient and generates far too much heat. With a switching supply, the main issues are EMI, efficiency, and of course cost. This book covers the design trade-offs involved in LED driving applications, from low-power, to UB-LEDs and beyond. Provides a practical, hands-on approach to power supply design for LED drivers Contains detailed examples of what works throughout the design process Presents commentary on how the calculated component value compares with the actual value used, including a description of why the choice was made
Download or read book POWER HVMOS Devices Compact Modeling written by Wladyslaw Grabinski and published by Springer Science & Business Media. This book was released on 2010-07-20 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Semiconductor power electronics plays a dominant role due its increased efficiency and high reliability in various domains including the medium and high electrical drives, automotive and aircraft applications, electrical power conversion, etc. Power/HVMOS Devices Compact Modeling will cover very extensive range of topics related to the development and characterization power/high voltage (HV) semiconductor technologies as well as modeling and simulations of the power/HV devices and smart power integrated circuits (ICs). Emphasis is placed on the practical applications of the advanced semiconductor technologies and the device level compact/spice modeling. This book is intended to provide reference information by selected, leading authorities in their domain of expertise. They are representing both academia and industry. All of them have been chosen because of their intimate knowledge of their subjects as well as their ability to present them in an easily understandable manner.
Download or read book Power Electronics written by Branko L. Dokić and published by Springer. This book was released on 2014-11-26 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the result of the extensive experience the authors gained through their year-long occupation at the Faculty of Electrical Engineering at the University of Banja Luka. Starting at the fundamental basics of electrical engineering, the book guides the reader into this field and covers all the relevant types of converters and regulators. Understanding is enhanced by the given examples, exercises and solutions. Thus this book can be used as a textbook for students, for self-study or as a reference book for professionals.
Download or read book Wafer Bonding written by Marin Alexe and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: The topics include bonding-based fabrication methods of silicon-on-insulator, photonic crystals, VCSELs, SiGe-based FETs, MEMS together with hybrid integration and laser lift-off. The non-specialist will learn about the basics of wafer bonding and its various application areas, while the researcher in the field will find up-to-date information about this fast-moving area, including relevant patent information.
