Download or read book Design and Analysis of Connections in Steel Structures written by Alfredo Boracchini and published by John Wiley & Sons. This book was released on 2018-07-09 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dieses Buch führt in alle Aspekte der sicheren Berechnung, Bemessung und Konstruktion von wirtschaftlichen modernen Verbindungen im Stahlbau ein. Die Hintergrunderläuterungen sind nicht an eine spezifische Norm gekoppelt, sondern es werden unterschiedliche Normen und Methoden verglichen, die in der Praxis zur Anwendung kommen, wie z. B. Eurocode, AISC, DIN, BS. Anhand einer Reihe von Beispielen werden Problemlösungen detailliert beschrieben und illustriert. Damit erhält der Leser alle notwendigen Werkzeuge an die Hand, um auch komplexe Probleme bei der Konstruktion von Verbindungen zu lösen. Das Buch ist für Berufseinsteiger, für erfahrene Praktiker sowie auch für Stahlbaufachleute eine Arbeitshilfe, denn es werden einfache und komplexe Beanspruchungen an Verbindungen abgebildet. Weniger ausführlich werden Erdbebenauslegung, Schweißnähte, die Wechselwirkung mit anderen Materialien (Beton, Holz) und kalt geformte Verbindungen behandelt.

Download or read book Steel Connection Analysis written by Paolo Rugarli and published by John Wiley & Sons. This book was released on 2018-04-30 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: First book to discuss the analysis of structural steel connections by Finite Element Analysis—which provides fast, efficient, and flexible checking of these vital structural components The analysis of steel structures is complex—much more so than the analysis of similar concrete structures. There are no universally accepted rules for the analysis of connections in steel structures or the analysis of the stresses transferred from one connection to another. This book presents a general approach to steel connection analysis and check, which is the result of independent research that began more than fifteen years ago. It discusses the problems of connection analysis and describes a generally applicable methodology, based on Finite Element Analysis, for analyzing the connections in steel structures. That methodology has been implemented in software successfully, providing a fast, automatic, and flexible route to the design and analysis of the connections in steel structures. Steel Connection Analysis explains several general methods which have been researched and programmed during many years, and that can be used to tackle the problem of connection analysis in a very general way, with a limited and automated computational effort. It also covers several problems related to steel connection analysis automation. Uses Finite Element Analysis to discuss the analysis of structural steel connections Analysis is applicable to all connections in steel structures The methodology is the basis of the commercially successful CSE connection analysis software Analysis is fast and flexible Structural engineers, fabricators, software developing firms, university researchers, and advanced students of civil and structural engineering will all benefit from Steel Connection Analysis.

Download or read book Handbook of Steel Connection Design and Details written by Akbar R. Tamboli and published by McGraw Hill Professional. This book was released on 2010 with total page 654 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surveys the leading methods for connecting structural steel components, covering state-of-the-art techniques and materials, and includes new information on welding and connections. Hundreds of detailed examples, photographs, and illustrations are found throughout this handbook. --from publisher description.

Download or read book Structural Steel Semirigid Connections written by Ciro Faella and published by CRC Press. This book was released on 1999-10-27 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the semirigidity concept was introduced many years ago, steel structures are usually designed by assuming that beam-to-column joints are either pinned or rigid. Theses assumptions allow a great simplification in structural analysis and design-but they neglect the true behavior of joints. The economic and structural benefits of semirigid joints are well known and much has been written about their use in braced frames. However, they are seldom used by designers, because most semirigid connections have highly nonlinear behavior, so that the analysis and design of frames using them is difficult. In fact, the design problem becomes more difficult as soon as the true rotational behavior of beam-to-column joints is accounted for-the design problem requires many attempts to achieve a safe and economical solution. Structural Steel Semirigid Connections provides a comprehensive source of information on the design of semirigid frames, up to the complete detailing of beam-to-column connections, and focuses on the prediction of the moment-rotation curve of connections. This is the first work that contains procedures for predicting the connection plastic rotation supply-necessary for performing the local ductility control in nonlinear static and dynamic analyses. Extensive numerical examples clarify the practical application of the theoretical background. This exhaustive reference and the awareness it provides of the influence of joint rotational behavior on the elastic and inelastic responses of structures will greatly benefit researchers, professionals, and specification writing bodies devoted to structural steel.

Download or read book Analysis and Design of Steel and Composite Structures written by Qing Quan Liang and published by CRC Press. This book was released on 2018-10-08 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel and composite steel–concrete structures are widely used in modern bridges, buildings, sport stadia, towers, and offshore structures. Analysis and Design of Steel and Composite Structures offers a comprehensive introduction to the analysis and design of both steel and composite structures. It describes the fundamental behavior of steel and composite members and structures, as well as the current design criteria and procedures given in Australian standards AS/NZS 1170, AS 4100, AS 2327.1, Eurocode 4, and AISC-LRFD specifications. Featuring numerous step-by-step examples that clearly illustrate the detailed analysis and design of steel and composite members and connections, this practical and easy-to-understand text: Covers plates, members, connections, beams, frames, slabs, columns, and beam-columns Considers bending, axial load, compression, tension, and design for strength and serviceability Incorporates the author’s latest research on composite members Analysis and Design of Steel and Composite Structures is an essential course textbook on steel and composite structures for undergraduate and graduate students of structural and civil engineering, and an indispensable resource for practising structural and civil engineers and academic researchers. It provides a sound understanding of the behavior of structural members and systems.

Download or read book Connections in Steel Structures written by R. Bjorhovde and published by CRC Press. This book was released on 1988-02-19 with total page 415 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the Proceedings of a State-of-the-Art Workshop on Connenctions and the Behaviour, Strength and Design of Steel Structures held at Laboratoire de Mecanique et Technologie, Ecole Normale, Cachan France from 25th to 27th May 1987. It contains the papers presented at the above proceedings and is split into eight main sections covering: Local Analysis of Joints, Mathematical Models, Classification, Frame Analysis, Frame Stability and Simplified Methods, Design Requirements, Data Base Organisation, Research and Development Needs. With papers from 50 international contributors this text will provide essential reading for all those involved with steel structures.

Download or read book Analysis and Design of Structural Bonded Joints written by Liyong Tong and published by Springer. This book was released on 2014-02-23 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: 254 7. 2 AEROSPACE 261 7. 3 MARINE 265 7. 4 GROUND TRANSPORTATION 268 7. 5 CNIL 270 References 285 Index Preface Most structures consist of an assembly of a number of individual components that must be connected to form an integral load transmission path. These connections are often referred to as joints and can be achieved in a variety of forms, e. g. by bolting, riveting, or other forms of mechanical fastening, or by welding or brazing for connecting metallic elements, or by adhesive bonding. No matter what forms of connections are used in the structure, these joints are potentially the weakest points in the structure and the locations where a weight penalty may apply. Thus structural joints must be designed adequately to meet the specific design requirements. Adhesive bonding represents one of the most important enabling technologies for developing innovative design concepts and structural configurations as well as exploiting new materials. The evolution of adhesive bonding technology, and its current knowledge base, was made possibly by the explosive growth in the adhesive applications in a great variety of industries over the past few decades. While it is easy for everyone to identify examples of adhesive bonding in the world around us, analysis and design of structural bonded joints represent one of the most challenging jobs in structural design and manufacturing. Compared to other joining methods, particularly mechanical fastening, adhesive bonding can offer substantial performance and economic advantages.

Download or read book Structural Analysis and Design written by H.B. Harrison and published by Elsevier. This book was released on 2014-06-28 with total page 858 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed to give the structural engineer training in microcomputer technology, starting with theory and computer methods in Part 1 and culminating in extensive listings of programs in both Fortran 77 and Basic in Part 2. Because it provides programs and the information to understand and modify them for specific purposes, it can be used as a text for graduate engineering students or by the professional engineer interested in learning how computers can be applied to practical problems. Data files and worked solutions are included. Some forty programs are explained ranging from cross-sectional and connection analysis, through equation solution methods to linear elastic analysis of plane and space frames, as well as describing the non-linear and large deformation treatment of a variety of frame, cable and arch structures. This new edition extensively revises the chapter on beam analysis, with more powerful theory and programs suitable to the microcomputers of today.

Download or read book Finite Element Analysis and Design of Metal Structures written by Ehab Ellobody and published by Elsevier. This book was released on 2013-09-05 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditionally, engineers have used laboratory testing to investigate the behavior of metal structures and systems. These numerical models must be carefully developed, calibrated and validated against the available physical test results. They are commonly complex and very expensive. From concept to assembly, Finite Element Analysis and Design of Metal Structures provides civil and structural engineers with the concepts and procedures needed to build accurate numerical models without using expensive laboratory testing methods. Professionals and researchers will find Finite Element Analysis and Design of Metal Structures a valuable guide to finite elements in terms of its applications. - Presents design examples for metal tubular connections - Simplified review for general steps of finite element analysis - Commonly used linear and nonlinear analyses in finite element modeling - Realistic examples of concepts and procedures for Finite Element Analysis and Design

Download or read book Design of Steel Structures written by Elias G. Abu-Saba and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for classroom teaching in architectural and civil engineering at the graduate and undergraduate levels. Although it has been developed from lecture notes given in structural steel design, it can be useful to practicing engineers. Many of the examples presented in this book are drawn from the field of design of structures. Design of Steel Structures can be used for one or two semesters of three hours each on the undergraduate level. For a two-semester curriculum, Chapters 1 through 8 can be used during the first semester. Heavy emphasis should be placed on Chapters 1 through 5, giving the student a brief exposure to the consideration of wind and earthquakes in the design of buildings. With the new federal requirements vis a vis wind and earthquake hazards, it is beneficial to the student to have some under standing of the underlying concepts in this field. In addition to the class lectures, the instructor should require the student to submit a term project that includes the complete structural design of a multi-story building using standard design procedures as specified by AISC Specifications. Thus, the use of the AISC Steel Construction Manual is a must in teaching this course. In the second semester, Chapters 9 through 13 should be covered. At the undergraduate level, Chapters 11 through 13 should be used on a limited basis, leaving the student more time to concentrate on composite construction and built-up girders.

Download or read book Connections in Steel Structures III written by Reidar Bjorhovde and published by Elsevier. This book was released on 1996-05-20 with total page 635 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book publishes the proceedings from the Third International Workshop on Connections in Steel Structures: Behaviour, Strength and Design held in Trento, Italy, 29-31 May 1995. The workshop brought together the world's foremost experts in steel connections research, development, fabrication and design. The scope of the papers reflects state-of-the-art issues in all areas of endeavour, and manages to bring together the needs of researchers as well as designers and fabricators. Topics of particular importance include connections for composite (steel-concrete) structures, evaluation methods and reliability issues for semi-rigid connections and frames, and the impact of extreme loading events such as those imposed by major earthquakes. The book highlights novel methods and applications in the field and ensures that designers and other members of the construction industry gain access to the new results and procedures.

Download or read book Design of Steel Structures written by Jay Shen and published by McGraw Hill Professional. This book was released on 2021-04-05 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: A straightforward overview of the fundamentals of steel structure design This hands-on structural engineering guide provides concise, easy-to-understand explanations of the design and behavior of steel columns, beams, members, and connections. Ideal for preparing you for the field, Design of Steel Structures includes real-world examples that demonstrate practical applications of AISC 360 specifications. You will get an introduction to more advanced topics, including connections, composite members, plate girders, and torsion. This textbook also includes access to companion online videos that help connect theory to practice. Coverage includes: Structural systems and elements Design considerations Tension members Design of columns AISC design requirements Design of beams Torsion Stress analysis and design considerations Beam-columns Connections Plate girders Intermediate transverse and bearing stiffeners

Download or read book Non Linear Static and Cyclic Analysis of Steel Frames with Semi Rigid Connections written by Siu-Lai Chan and published by Elsevier. This book was released on 2000-05-19 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to the discussion and studies of simple and efficient numerical procedures for large deflection and elasto-plastic analysis of steel frames under static and dynamic loading. In chapter 1, the basic fundamental behaviour and philosophy for design of structural steel is discussed, emphasising different modes of buckling and the inter-relationship between different types of analysis. In addition to this, different levels of refinement for non-linear analysis are described. An introduction is also given to the well-known P-&dgr; and P-&Dgr; effects. Chapter 2 presents the basic matrix method of analysis and gives several examples of linear analysis of semi-rigid pointed frames. It is evident from this that one must have a good understanding of first-order linear analysis before handling a second-order non-linear analysis. In chapter 3, the linearized bifurcation and second-order large deflection are compared and the detailed procedure for a second-order analysis based on the Newton-Raphson scheme is described. Chapter 4 introduces various solution schemes for tracing of post-buckling equilibrium paths and the Minimum Residual Displacement control method with arc-length load step control is employed for the post-buckling analysis of two and three dimensional structures. Chapter 5 addresses the non-linear behaviour and modelling of semi-rigid connections while several numerical functions for description of moment versus rotation curves of typical connection types are introduced. The scope of the work in chapter 6 covers semi-rigid connections and material yielding to the static analysis of steel frames. Chapter 7 studies the cyclic response of steel frames with semi-rigid joints and elastic material characteristics. In the last chapter the combined effects of semi-rigid connections and plastic hinges on steel frames under time-dependent loads are studied using a simple springs-in-series model. For computational effectiveness and efficiency, the concentrated plastic hinge concept is used throughout these studies.

Download or read book Design of Joints in Steel Structures written by ECCS - European Convention for Constructional Steelwork and published by John Wiley & Sons. This book was released on 2017-06-19 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details the basic concepts and the design rules included in Eurocode 3 "Design of steel structures" Part 1-8 "Design of joints". Joints in composite construction are also addressed through references to Eurocode 4 "Design of composite steel and concrete structures" Part 1-1 "General rules and rules for buildings". Moreover, the relevant UK National Annexes are also taken into account. Attention has to be duly paid to the joints when designing a steel or composite structure, in terms of the global safety of the construction, and also in terms of the overall cost, including fabrication, transportation and erection. Therefore, in this book, the design of the joints themselves is widely detailed, and aspects of selection of joint configuration and integration of the joints into the analysis and the design process of the whole construction are also fully covered. Connections using mechanical fasteners, welded connections, simple joints, moment-resisting joints and lattice girder joints are considered. Various joint configurations are treated, including beam-to-column, beam-to-beam, column bases, and beam and column splice configurations, under different loading situations (axial forces, shear forces, bending moments and their combinations). The book also briefly summarises the available knowledge relating to the application of the Eurocode rules to joints under fire, fatigue, earthquake, etc., and also to joints in a structure subjected to exceptional loadings, where the risk of progressive collapse has to be mitigated. Finally, there are some worked examples, plus references to already published examples and to design tools, which will provide practical help to practitioners.

Download or read book Structural Steelwork Connections written by Graham Wynford Owens and published by Butterworth-Heinemann. This book was released on 1989 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This guide to the design of structural steelwork connections combines a discussion of the philosophy of design, and its implementation in a range of applications to all types of connections used in structural steelwork. The book reflects the latest Standards and Codes of Practice.

Download or read book Structural Steel Design written by Abi O. Aghayere and published by Mercury Learning and Information. This book was released on 2020-01-23 with total page 1409 pages. Available in PDF, EPUB and Kindle. Book excerpt: Structural Steel Design, Third Edition is a simple, practical, and concise guide to structural steel design – using the Load and Resistance Factor Design (LRFD) and the Allowable Strength Design (ASD) methods -- that equips the reader with the necessary skills for designing real-world structures. Civil, structural, and architectural engineering students intending to pursue careers in structural design and consulting engineering, and practicing structural engineers will find the text useful because of the holistic, project-based learning approach that bridges the gap between engineering education and professional practice. The design of each building component is presented in a way such that the reader can see how each element fits into the entire building design and construction process. Structural details and practical example exercises that realistically mirror what obtains in professional design practice are presented. Features: - Includes updated content/example exercises that conform to the current codes (ASCE 7, ANSI/AISC 360-16, and IBC) - Adds coverage to ASD and examples with ASD to parallel those that are done LRFD - Follows a holistic approach to structural steel design that considers the design of individual steel framing members in the context of a complete structure. Instructor resources are available online by emailing the publisher with proof of class adoption at [email protected].

Download or read book Steel Structures Design ASD LRFD written by Alan Williams and published by McGraw Hill Professional. This book was released on 2011-02-07 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: A COMPLETE GUIDE TO THE DESIGN OF STEEL STRUCTURES Steel Structures Design: ASD/LRFD introduces the theoretical background and fundamental basis of steel design and covers the detailed design of members and their connections. This in-depth resource provides clear interpretations of the American Institute of Steel Construction (AISC) Specification for Structural Steel Buildings, 2010 edition, the American Society of Civil Engineers (ASCE) Minimum Design Loads for Buildings and Other Structures, 2010 edition, and the International Code Council (ICC) International Building Code, 2012 edition. The code requirements are illustrated with 170 design examples, including concise, step-by-step solutions. Coverage includes: Steel buildings and design criteria Design loads Behavior of steel structures under design loads Design of steel structures under design loads Design of steel beams in flexure Design of steel beams for shear and torsion Design of compression members Stability of frames Design by inelastic analysis Design of tension members Design of bolted and welded connections Plate girders Composite construction