Download or read book ANALYSIS AND DESIGN PRACTICE OF STEEL STRUCTURES written by KARUNA MOY GHOSH and published by PHI Learning Pvt. Ltd.. This book was released on 2014-02-11 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive presentation of the fundamental aspects of analysis and design of steel structures. It is primarily meant for the undergraduate students of civil engineering and postgraduate students of structural engineering. It will also be immensely useful for structural engineers engaged in design, consultancy and construction involving steel structures. The important theoretical and practical concepts which need to be assimilated prior to undertaking analysis and design—general principles and practices, functional aspects of structures, basic design concepts, alternative arrangements of equipment and service, clarity of structural behaviour, and calculations of loadings on structures—are covered in the first two chapters. The ensuing chapters provide stepwise presentation of the analysis and design procedures for various steel structures and structural elements/members on the basis of Eurocodes and British (BS) codes of practice. The three types of structures specifically covered, on the basis of functional aspects, are scrap yard structures, conveyor structural systems, and turbo-generator buildings. In the Second Edition, analysis and design of steel structures have been carried out based on Indian Standard code of practice IS 800:2007. Every component of the structure comprising the beams and columns is designed in compliance with the code IS 800:2007. A comparison has been made between the results of the steel structures analysed and designed in compliance with EC3: Part 1-1 and those obtained in accordance with Indian Standard code of practice IS 800:2007. The book discusses the various structural analyses and design calculations in an exhaustive manner. The text is illustrated with an abundant number of visuals. Important sources of information relevant to steel structures can be found in the references at the end of various chapters. Audience Undergraduate students of civil engineering and postgraduate students of structural engineering.

Download or read book Design and Analysis of Connections in Steel Structures written by Alfredo Boracchini and published by John Wiley & Sons. This book was released on 2018-07-09 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book introduces all the aspects needed for the safe and economic design and analysis of connections using bolted joints in steel structures. This is not treated according to any specific standard but making comparison among the different norms and methodologies used in the engineering practice, e.g. Eurocode, AISC, DIN, BS. Several examples are solved and illustrated in detail, giving the reader all the tools necessary to tackle also complex connection design problems. The book is introductory but also very helpful to advanced and specialist audiences because it covers a large variety of practice demands for connection design. Parts that are not taken to an advanced level are seismic design, welds, interaction with other materials (concrete, wood), and cold formed connections./p

Download or read book Analysis and Design of Steel and Composite Structures written by Qing Quan Liang and published by CRC Press. This book was released on 2018-10-08 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel and composite steel–concrete structures are widely used in modern bridges, buildings, sport stadia, towers, and offshore structures. Analysis and Design of Steel and Composite Structures offers a comprehensive introduction to the analysis and design of both steel and composite structures. It describes the fundamental behavior of steel and composite members and structures, as well as the current design criteria and procedures given in Australian standards AS/NZS 1170, AS 4100, AS 2327.1, Eurocode 4, and AISC-LRFD specifications. Featuring numerous step-by-step examples that clearly illustrate the detailed analysis and design of steel and composite members and connections, this practical and easy-to-understand text: Covers plates, members, connections, beams, frames, slabs, columns, and beam-columns Considers bending, axial load, compression, tension, and design for strength and serviceability Incorporates the author’s latest research on composite members Analysis and Design of Steel and Composite Structures is an essential course textbook on steel and composite structures for undergraduate and graduate students of structural and civil engineering, and an indispensable resource for practising structural and civil engineers and academic researchers. It provides a sound understanding of the behavior of structural members and systems.

Download or read book Design of Steel Structures written by Elias G. Abu-Saba and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for classroom teaching in architectural and civil engineering at the graduate and undergraduate levels. Although it has been developed from lecture notes given in structural steel design, it can be useful to practicing engineers. Many of the examples presented in this book are drawn from the field of design of structures. Design of Steel Structures can be used for one or two semesters of three hours each on the undergraduate level. For a two-semester curriculum, Chapters 1 through 8 can be used during the first semester. Heavy emphasis should be placed on Chapters 1 through 5, giving the student a brief exposure to the consideration of wind and earthquakes in the design of buildings. With the new federal requirements vis a vis wind and earthquake hazards, it is beneficial to the student to have some under standing of the underlying concepts in this field. In addition to the class lectures, the instructor should require the student to submit a term project that includes the complete structural design of a multi-story building using standard design procedures as specified by AISC Specifications. Thus, the use of the AISC Steel Construction Manual is a must in teaching this course. In the second semester, Chapters 9 through 13 should be covered. At the undergraduate level, Chapters 11 through 13 should be used on a limited basis, leaving the student more time to concentrate on composite construction and built-up girders.

Download or read book Design of Steel Structures written by Jay Shen and published by McGraw Hill Professional. This book was released on 2021-04-05 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: A straightforward overview of the fundamentals of steel structure design This hands-on structural engineering guide provides concise, easy-to-understand explanations of the design and behavior of steel columns, beams, members, and connections. Ideal for preparing you for the field, Design of Steel Structures includes real-world examples that demonstrate practical applications of AISC 360 specifications. You will get an introduction to more advanced topics, including connections, composite members, plate girders, and torsion. This textbook also includes access to companion online videos that help connect theory to practice. Coverage includes: Structural systems and elements Design considerations Tension members Design of columns AISC design requirements Design of beams Torsion Stress analysis and design considerations Beam-columns Connections Plate girders Intermediate transverse and bearing stiffeners

Download or read book Plastic Analysis and Design of Steel Structures written by M. Bill Wong and published by Butterworth-Heinemann. This book was released on 2011-08-30 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: The plastic analysis method has been used extensively by engineers for designing steel structures. Simpler structures can be analyzed using the basic virtual work formulation, but more complex frames are evaluated with specialist computer software. This new book sets out a method for carrying out plastic analysis of complex structures without the need for specialist tools. The book provides an introduction to the use of linear programming techniques for plastic analysis. This powerful and advanced method for plastic analysis is important in an automated computational environment, in particular for non-linear structural analysis. A detailed comparison between the design codes for the United States and Australia and the emerging European Eurocodes enables practising engineers to understand the issues involved in plastic design procedures and the limitations imposed by this design method. * Covers latest research in plastic analysis and analytical tools * Introduces new successive approximation method for calculating collapse loads * Programming guide for using spreadsheet tools for plastic analysis

Download or read book Advanced Analysis and Design of Steel Frames written by Gou-Qiang Li and published by John Wiley & Sons. This book was released on 2007-06-13 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel frames are used in many commercial high-rise buildings, as well as industrial structures, such as ore mines and oilrigs. Enabling construction of ever lighter and safer structures, steel frames have become an important topic for engineers. This book, split into two parts covering advanced analysis and advanced design of steel frames, guides the reader from a broad array of frame elements through to advanced design methods such as deterministic, reliability, and system reliability design approaches. This book connects reliability evaluation of structural systems to advanced analysis of steel frames, and ensures that the steel frame design described is founded on system reliability. Important features of the this book include: fundamental equations governing the elastic and elasto-plastic equilibrium of beam, sheer-beam, column, joint-panel, and brace elements for steel frames; analysis of elastic buckling, elasto-plastic capacity and earthquake-excited behaviour of steel frames; background knowledge of more precise analysis and safer design of steel frames against gravity and wind, as well as key discussions on seismic analysis. theoretical treatments, followed by numerous examples and applications; a review of the evolution of structural design approaches, and reliability-based advanced analysis, followed by the methods and procedures for how to establish practical design formula. Advanced Design and Analysis of Steel Frames provides students, researchers, and engineers with an integrated examination of this core civil and structural engineering topic. The logical treatment of both advanced analysis followed by advanced design makes this an invaluable reference tool, comprising of reviews, methods, procedures, examples, and applications of steel frames in one complete volume.

Download or read book Design of Steel Structures written by Luís Simões da Silva and published by John Wiley & Sons. This book was released on 2012-01-09 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the fundamental design concept of Eurocode 3 for current steel structures in building construction, and their practical application. Following a discussion of the basis of design, including the principles of reliability management and the limit state approach, the material standards and their use are detailed. The fundamentals of structural analysis and modeling are presented, followed by the design criteria and approaches for various types of structural members. The theoretical basis and checking procedures are closely tied to the Eurocode requirements. The following chapters expand on the principles and applications of elastic and plastic design, each exemplified by the step-by-step design calculation of a braced steel-framed building and an industrial building, respectively. Besides providing the necessary theoretical concepts for a good understanding, this manual intends to be a supporting tool for the use of practicing engineers. In order of this purpose, throughout the book, numerous worked examples are provided, concerning the analysis of steel structures and the design of elements under several types of actions. These examples will facilitate the acceptance of the code and provide for a smooth transition from earlier national codes to the Eurocode.

Download or read book Steel Design 1 Structural Basics written by H. H. Snijder and published by John Wiley & Sons. This book was released on 2020-07-21 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook covers the design and analysis of steel structures for buildings according to EN 1990 (Eurocode 0), EN 1991 (Eurocode 1) and EN 1993 (Eurocode 3). Chapter 1 describes the theory and background of EN 1990 in terms of structural safety, reliability and the design values of resistances and actions. Chapter 2 deals with actions and deformations described in EN 1991. The permanent loads and vari¬able actions and in particular the imposed loads and the snow loads and wind actions are discussed. This chapter also contains three worked examples to determine the actions on a floor in a residential house, the actions on a free-standing platform canopy at a station and the wind actions on the façades of an office building. Chapter 3 is about modelling, discussing the schematisation of the structural system, the joints and the material properties as well as the cross-section properties. Chapter 4 deals with the classification of frames and the various analysis methods for unbraced and braced frames. Chapter 5 then goes deeper into these analysis methods to determine the force distribution and defor¬mations. Chapter 6 deals with the assessment by code-checking of (parts of) the steel structure with EN 1993-1-1 and EN 1993-1-8. At a basic level, the assessment of the resistance of cross-sections, the stability of members under axial forces and the resistance of bolted and welded connections are explained. Chapter 7 discusses in an extensive way the assessment by code-checking of the resistance of cross-sections, both for single and combined internal forces. The principles of the assessment of the resistance of cross-sections according to elastic and plastic theory are also discussed.

Download or read book Analysis and Design of Steel Structures written by Almon H. Fuller and published by . This book was released on 1936 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Ductile Design of Steel Structures 2nd Edition written by Michel Bruneau and published by McGraw Hill Professional. This book was released on 2011-07-14 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive coverage of the background and design requirements for plastic and seismic design of steel structures Thoroughly revised throughout, Ductile Design of Steel Structures, Second Edition, reflects the latest plastic and seismic design provisions and standards from the American Institute of Steel Construction (AISC) and the Canadian Standard Association (CSA). The book covers steel material, cross-section, component, and system response for applications in plastic and seismic design, and provides practical guidance on how to incorporate these principles into structural design. Three new chapters address buckling-restrained braced frame design, steel plate shear wall design, and hysteretic energy dissipating systems and design strategies. Eight other chapters have been extensively revised and expanded, including a chapter presenting the basic seismic design philosophy to determine seismic loads. Self-study problems at the end of each chapter help reinforce the concepts presented. Written by experts in earthquake-resistant design who are active in the development of seismic guidelines, this is an invaluable resource for students and professionals involved in earthquake engineering or other areas related to the analysis and design of steel structures. COVERAGE INCLUDES: Structural steel properties Plastic behavior at the cross-section level Concepts, methods, and applications of plastic analysis Building code seismic design philosophy Design of moment-resisting frames Design of concentrically braced frames Design of eccentrically braced frames Design of steel energy dissipating systems Stability and rotation capacity of steel beams

Download or read book Structural Analysis and Design of Tall Buildings written by Bungale S. Taranath and published by CRC Press. This book was released on 2016-04-19 with total page 713 pages. Available in PDF, EPUB and Kindle. Book excerpt: As software skills rise to the forefront of design concerns, the art of structural conceptualization is often minimized. Structural engineering, however, requires the marriage of artistic and intuitive designs with mathematical accuracy and detail. Computer analysis works to solidify and extend the creative idea or concept that might have started o

Download or read book Ultimate Limit State Analysis and Design of Plated Structures written by Jeom Kee Paik and published by John Wiley & Sons. This book was released on 2018-03-02 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews and describes both the fundamental and practical design procedures for the ultimate limit state design of ductile steel plated structures The new edition of this well-established reference reviews and describes both fundamentals and practical design procedures for steel plated structures. The derivation of the basic mathematical expressions is presented together with a thorough discussion of the assumptions and the validity of the underlying expressions and solution methods. Furthermore, this book is also an easily accessed design tool, which facilitates learning by applying the concepts of the limit states for practice using a set of computer programs, which can be downloaded. Ultimate Limit State Design of Steel Plated Structures provides expert guidance on mechanical model test results as well as nonlinear finite element solutions, sophisticated design methodologies useful for practitioners in industries or research institutions, and selected methods for accurate and efficient analyses of nonlinear behavior of steel plated structures both up to and after the ultimate strength is reached. Covers recent advances and developments in the field Includes new topics on constitutive equations of steels, test database associated with low/elevated temperature, and strain rates Includes a new chapter on a semi-analytical method Supported by a companion website with illustrative example data sheets Provides results for existing mechanical model tests Offers a thorough discussion of assumptions and the validity of underlying expressions and solution methods Designed as both a textbook and a handy reference, Ultimate Limit State Design of Steel Plated Structures, Second Edition is well suited to teachers and university students who are approaching the limit state design technology of steel plated structures for the first time. It also meets the needs of structural designers or researchers who are involved in civil, marine, and mechanical engineering as well as offshore engineering and naval architecture.

Download or read book Design of Steel Structures to Eurocodes written by Ioannis Vayas and published by Springer. This book was released on 2018-11-23 with total page 595 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook describes the rules for the design of steel and composite building structures according to Eurocodes, covering the structure as a whole, as well as the design of individual structural components and connections. It addresses the following topics: the basis of design in the Eurocodes framework; the loads applied to building structures; the load combinations for the various limit states of design and the main steel properties and steel fabrication methods; the models and methods of structural analysis in combination with the structural imperfections and the cross-section classification according to compactness; the cross-section resistances when subjected to axial and shear forces, bending or torsional moments and to combinations of the above; component design and more specifically the design of components sensitive to instability phenomena, such as flexural, torsional and lateral-torsional buckling (a section is devoted to composite beams); the design of connections and joints executed by bolting or welding, including beam to column connections in frame structures; and alternative configurations to be considered during the conceptual design phase for various types of single or multi-storey buildings, and the design of crane supporting beams. In addition, the fabrication and erection procedures, as well as the related quality requirements and the quality control methods are extensively discussed (including the procedures for bolting, welding and surface protection). The book is supplemented by more than fifty numerical examples that explain in detail the appropriate procedures to deal with each particular problem in the design of steel structures in accordance with Eurocodes. The book is an ideal learning resource for students of structural engineering, as well as a valuable reference for practicing engineers who perform designs on basis of Eurocodes.

Download or read book Analysis and design of steel structures written by Almon Homer Fuller and published by . This book was released on 1939 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Steel Structures written by Hassan Al Nageim and published by CRC Press. This book was released on 2016-11-03 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fourth edition of this popular steel structures book contains references to both Eurocodes and British Standards. All the material has been updated where necessary, and new and revised worked examples are included. Sections on the meaning, the purpose and limits of structural design, sustainable steel building and energy saving have been updated. The initial chapters cover the essentials of structural engineering and structural steel design. The remainder of the book is dedicated to a detail examination of the analysis and design of selected types of structures, presenting complex designs in an understandable and user-friendly way. These structures include a range of single and multi-storey buildings, floor systems and wide-span buildings. Each design example is illustrated with applications based on current Eurocodes or British Standard design data, thus assisting the reader to share in the environment of the design process that normally takes place in practical offices and develop real design skills. Two new chapters on the design of cased steel columns and plate girders with and without rigid end posts to EC4 & EC3 are included too. References have been fully updated and include useful website addresses. Emphasis is placed on practical design with a view to helping undergraduate students and newly qualified engineers bridge the gap between academic study and work in the design office. Practising engineers who need a refresher course on up-to-dates methods of design and analysis to EC3 and EC4 will also find the book useful, and numerous worked examples are included.

Download or read book Steel Connection Analysis written by Paolo Rugarli and published by John Wiley & Sons. This book was released on 2018-04-30 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: First book to discuss the analysis of structural steel connections by Finite Element Analysis—which provides fast, efficient, and flexible checking of these vital structural components The analysis of steel structures is complex—much more so than the analysis of similar concrete structures. There are no universally accepted rules for the analysis of connections in steel structures or the analysis of the stresses transferred from one connection to another. This book presents a general approach to steel connection analysis and check, which is the result of independent research that began more than fifteen years ago. It discusses the problems of connection analysis and describes a generally applicable methodology, based on Finite Element Analysis, for analyzing the connections in steel structures. That methodology has been implemented in software successfully, providing a fast, automatic, and flexible route to the design and analysis of the connections in steel structures. Steel Connection Analysis explains several general methods which have been researched and programmed during many years, and that can be used to tackle the problem of connection analysis in a very general way, with a limited and automated computational effort. It also covers several problems related to steel connection analysis automation. Uses Finite Element Analysis to discuss the analysis of structural steel connections Analysis is applicable to all connections in steel structures The methodology is the basis of the commercially successful CSE connection analysis software Analysis is fast and flexible Structural engineers, fabricators, software developing firms, university researchers, and advanced students of civil and structural engineering will all benefit from Steel Connection Analysis.