Download or read book Analysis and Design of Slab on girder Highway Bridge Decks written by Li Cao and published by . This book was released on 1996 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Grillage Analogy in Bridge Deck Analysis written by C. S. Surana and published by Alpha Science Int'l Ltd.. This book was released on 1998 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the well established computer-aided method of grillage analogy as applied to analysis of bridge decks. The method, applicable to various types of bridge decks (such as slab bridges, T-beam bridges and box-girder bridges), can handle rigid or flexible support conditions, and right, skew or curved plan layouts.The procedure and recommendations for idealising the actual bridge decks and loadings into mathematical models are discussed. Two programs, given in ready-to-use form, along with descriptions of various subroutines, can analyse a variety of bridge decks accurately and obtain all the responses required in the design. Their uses are explained through worked-out examples. These programs, along with input-data and exhaustive output results of all the worked-out examples, are also available on a diskette and can be ordered seperately from the authors through the publisher. This will help those who do not want to type programs from the book and run into possible risk of errors.The book will be useful for the students, researchers, teachers, designers and consultants engaged in analysing, designing, vetting, tendering or constructing bridges.
Download or read book Analysis and Design of Bridges written by C. Yilmaz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Proceedings of the NATO Advanced Study Institute on Analysis and Design of Bridges held at ~e§me, lzmir, Turkey from 28 June 1982 to 9 July 1982 are contained in the present volume. The Advanced Study Institute was attended by 37 lecturers and participants from 10 different countries. The Organizing Committee consisted of Professors P. Gtilkan, A. C. Scordelis, S. T. Wasti and 9. Yl. lmaz. The guidelines set by NATO for the Advanced Study Institute require it to serve not only as an efficient forum for the dissemination of available advanced knowledge to a selected group of qualified people but also as a platform for the exploration of future research possibilities in the scientific or engineering areas concerned. The main topics covered by the present Advanced Study Institute were the mathematical modelling of bridges for better analysis and the scientific assessment of bridge behaviour for the introduction of improved design procedures. It has been our observation that as a result of the range and depth of the lectures presented and the many informal discussions that took place, ideas became fissile, the stimulus never flagged and many gaps in the engineering knowledge of the participants were "bridged". Here we particularly wish to mention that valuable informal presenta tions of research work were made during the course of the Institute by Drs. Friedrich, Karaesmen, Lamas and Parker.
Download or read book Highway Bridge Superstructure Engineering written by Narendra Taly and published by CRC Press. This book was released on 2014-11-21 with total page 966 pages. Available in PDF, EPUB and Kindle. Book excerpt: A How-To Guide for Bridge Engineers and Designers Highway Bridge Superstructure Engineering: LRFD Approaches to Design and Analysis provides a detailed discussion of traditional structural design perspectives, and serves as a state-of-the-art resource on the latest design and analysis of highway bridge superstructures. This book is applicable to highway bridges of all construction and material types, and is based on the load and resistance factor design (LRFD) philosophy. It discusses the theory of probability (with an explanation leading to the calibration process and reliability), and includes fully solved design examples of steel, reinforced and prestressed concrete bridge superstructures. It also contains step-by-step calculations for determining the distribution factors for several different types of bridge superstructures (which form the basis of load and resistance design specifications) and can be found in the AASHTO LRFD Bridge Design Specifications. Fully Realize the Basis and Significance of LRFD Specifications Divided into six chapters, this instructive text: Introduces bridge engineering as a discipline of structural design Describes numerous types of highway bridge superstructures systems Presents a detailed discussion of various types of loads that act on bridge superstructures and substructures Discusses the methods of analyses of highway bridge superstructures Includes a detailed discussion of reinforced and prestressed concrete bridges, and slab-steel girder bridges Highway Bridge Superstructure Engineering: LRFD Approaches to Design and Analysis can be used for teaching highway bridge design courses to undergraduate- and graduate-level classes, and as an excellent resource for practicing engineers.
Download or read book Bridge Analysis Simplified written by Baidar Bakht and published by McGraw-Hill Companies. This book was released on 1985 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bridges written by Baidar Bakht and published by Springer. This book was released on 2015-10-09 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a valuable guide for practicing bridge engineers and graduate students in structural engineering; its main purpose is to present the latest concepts in bridge engineering in fairly easy-to-follow terms. The book provides details of easy-to-use computer programs for: · Analysing slab-on-girder bridges for live load distribution. · Analysing slab and other solid bridge components for live load distribution. · Analysing and designing concrete deck slab overhangs of girder bridges under vehicular loads. · Determining the failure loads of concrete deck slabs of girder bridges under concentrated wheel loads. In addition, the book includes extensive chapters dealing with the design of wood bridges and soil-steel bridges. Further, a unique chapter on structural health monitoring (SHM) will help bridge engineers determine the actual load carrying capacities of bridges, as opposed to their perceived analytical capacities. The chapter addressing structures made with fibre-reinforced polymers will allow engineers to design highly durable, economical and sustainable structures. This chapter also provides guidance on rehabilitating deteriorated structures with these new materials. The book also deals with the philosophy of bridge design without resorting to complex equations. Additional material to this book can be downloaded from http://extras.springer.com
Download or read book Bridge Engineering Handbook Second Edition written by Wai-Fah Chen and published by CRC Press. This book was released on 2014-01-24 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over 140 experts, 14 countries, and 89 chapters are represented in the second edition of the Bridge Engineering Handbook. This extensive collection highlights bridge engineering specimens from around the world, contains detailed information on bridge engineering, and thoroughly explains the concepts and practical applications surrounding the subject. Published in five books: Fundamentals, Superstructure Design, Substructure Design, Seismic Design, and Construction and Maintenance, this new edition provides numerous worked-out examples that give readers step-by-step design procedures, includes contributions by leading experts from around the world in their respective areas of bridge engineering, contains 26 completely new chapters, and updates most other chapters. It offers design concepts, specifications, and practice, as well as the various types of bridges. The text includes over 2,500 tables, charts, illustrations, and photos. The book covers new, innovative and traditional methods and practices; explores rehabilitation, retrofit, and maintenance; and examines seismic design and building materials. The second book, Superstructure Design, contains 19 chapters, and covers information on how to design all types of bridges. What’s New in the Second Edition: Includes two new chapters: Extradosed Bridges and Stress Ribbon Pedestrian Bridges Updates the Prestressed Concrete Girder Bridges chapter and rewrites it as two chapters: Precast/Pretensioned Concrete Girder Bridges and Cast-In-Place Post-Tensioned Prestressed Concrete Girder Bridges Expands the chapter on Bridge Decks and Approach Slabs and divides it into two chapters: Concrete Decks and Approach Slabs Rewrites seven chapters: Segmental Concrete Bridges, Composite Steel I-Girder Bridges, Composite Steel Box Girder Bridges, Arch Bridges, Cable-Stayed Bridges, Orthotropic Steel Decks, and Railings This text is an ideal reference for practicing bridge engineers and consultants (design, construction, maintenance), and can also be used as a reference for students in bridge engineering courses.
Download or read book Second order Analysis of Cable stayed Bridge Deck Slabs written by Zachary T. McNeil and published by . This book was released on 2013 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current provisions in CSA S6-06 Canadian Highway Bridge Design Code for computing second-order effects in slender concrete beam-columns were derived for columns in buildings, where these effects can often be neglected, so their applicability to extremely slender cable-stayed bridge decks warrants investigation. The research reported in this thesis first reviews the provisions in CSA S6-06, as well as eight equations proposed by others, for computing the flexural rigidity, EI, of slender concrete beam-columns. Methods for quantifying the rotational restraint provided at deck slab supports by steel or concrete floorbeams are presented and validated: steel floorbeams provide negligible restraint but concrete floorbeams can provide sufficient restraint to reduce markedly the effective length factor. A rational method is presented and validated for analyzing continuous beam-columns subjected to transverse loads applied between their supports. A sensitivity analysis demonstrates that the variables that influence the moment magnification of cable-stayed bridge decks are: the applied axial load, the slenderness ratio, the concrete compressive strength, and the rotational restraint provided at the deck slab supports. Lastly, the deficiency of the provisions in CSA S6-06 for designing a simplified three-span cable-stayed bridge deck is demonstrated and recommendations are given to facilitate design office practice.
Download or read book Simplified LRFD Bridge Design written by Jai B. Kim and published by CRC Press. This book was released on 2013-04-08 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Helping readers prepare for the civil and structural PE exam, this book presents numerous design examples that serve as a comprehensive, step-by-step guide to basic bridge design using the AASHTO LRFD Bridge Design Specifications, Fifth Edition. It offers a simplified explanation of load resistance factor design (LRFD) method-based bridge design principles and lists the AASHTO reference section numbers alongside formulas and where topics are introduced, to refer the reader to the primary source material. This is a valuable reference for civil engineering students as well as for practicing engineers.
Download or read book Prestressed Concrete Bridges written by Nigel R. Hewson and published by Thomas Telford. This book was released on 2003 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prestressed concrete decks are commonly used for bridges with spans between 25m and 450m and provide economic, durable and aesthetic solutions in most situations where bridges are needed. Concrete remains the most common material for bridge construction around the world, and prestressed concrete is frequently the material of choice. Extensively illustrated throughout, this invaluable book brings together all aspects of designing prestressed concrete bridge decks into one comprehensive volume. The book clearly explains the principles behind both the design and construction of prestressed concrete bridges, illustrating the interaction between the two. It covers all the different types of deck arrangement and the construction techniques used, ranging from in-situ slabs and precast beams; segmental construction and launched bridges; and cable-stayed structures. Included throughout the book are many examples of the different types of prestressed concrete decks used, with the design aspects of each discussed along with the general analysis and design process. Detailed descriptions of the prestressing components and systems used are also included. Prestressed Concrete Bridges is an essential reference book for both the experienced engineer and graduate who want to learn more about the subject.
Download or read book FRP Deck and Steel Girder Bridge Systems written by Julio F. Davalos and published by CRC Press. This book was released on 2013-03-26 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the analysis and design of fiber-reinforced polymer (FRP) bridge decks, which have been increasingly implemented in rehabilitation projects and new construction due to their reduced weight, lower maintenance costs, and enhanced durability. It compiles the necessary information, based primarily on research by the authors, to facilitate the development of standards and guidelines for using FRP decks in bridge designs. The book combines analytical models, numerical analyses, and experimental investigations, which can be applied to various design formulations. It also, for the first time, offers a complete set of design guidelines.
Download or read book Finite Element Analysis and Design of Steel and Steel Concrete Composite Bridges written by Ehab Ellobody and published by Elsevier. This book was released on 2023-01-25 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of Finite Element Analysis and Design of Steel and Steel-Concrete Composite Bridges is brought fully up-to-date and provides structural engineers, academics, practitioners, and researchers with a detailed, robust, and comprehensive combined finite modeling and design approach. The book’s eight chapters begin with an overview of the various forms of modern steel and steel-concrete composite bridges, current design codes (American, British, and Eurocodes), nonlinear material behavior of the bridge components, and applied loads and stability of steel and steel-concrete composite bridges. This is followed by self-contained chapters concerning design examples of steel and steel-concrete composite bridge components as well as finite element modeling of the bridges and their components. The final chapter focuses on finite element analysis and the design of composite highway bridges with profiled steel sheeting. This volume will serve as a valuable reference source addressing the issues, problems, challenges, and questions on how to enhance the design of steel and steel-concrete composite bridges, including highway bridges with profiled steel sheeting, using finite element modeling techniques. Provides all necessary information to understand relevant terminologies and finite element modeling for steel and composite bridges Discusses new designs and materials used in highway and railway bridge Illustrates how to relate the design guidelines and finite element modeling based on internal forces and nominal stresses Explains what should be the consistent approach when developing nonlinear finite element analysis for steel and composite bridges Contains extensive case studies on combining finite element analysis with design for steel and steel-concrete composite bridges, including highway bridges with profiled steel sheeting
Download or read book NCHRP Report written by and published by . This book was released on 1964 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bridge Engineering written by Demetrios E. Tonias and published by McGraw Hill Professional. This book was released on 2007 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aimed at US audience - architects (113,000), civil engineers (228,000), and universities and colleges offering structural engineering programs. This work reflects the bridge design code changes and the newest ASCE [American Association of Civil Engineers] design methods. It uses SI units throughout for international usage.
Download or read book Steel concrete Composite Bridges written by David Collings and published by Thomas Telford. This book was released on 2005 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Steel-concrete composite bridges shows how to choose the bridge form and design element sizes to enable the production of accurate drawings and also highlights a wide and full range of examples of the design and construction of this bridge type."--Jacket.
Download or read book Control of Time dependent Transverse Cracking in Reinforced Concrete Bridge Decks written by Cathy Hsiang-Chen Chen and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bridge Design Assessment and Monitoring written by Airong Chen and published by Routledge. This book was released on 2018-12-07 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridges play important role in modern infrastructural system. This book provides an up-to-date overview of the field of bridge engineering, as well as the recent significant contributions to the process of making rational decisions in bridge design, assessment and monitoring and resources optimization deployment for the purpose of enhancing the welfare of society. Tang specifies the purposes and requirements of the conceptual bridge design, considering bridge types, basic elements, structural systems and load conditions. Cremona and Poulin propose an assessment procedure for existing bridges. Kallias et al. develop a framework for the performance assessment of metallic bridges under atmospheric exposure by integrating coating deterioration and corrosion modelling. Soriano et al. employ a simplified approach to estimate the maximum traffic load effect on a highway bridge and compare the results with other approaches based on on-site weigh-in-motion data. Akiyama et al. propose a method for reliability-based durability design and service life assessment of reinforced concrete deck slab of jetty structures. Chen et al. propose a meso-scale model to simulate the uniform and pitting corrosion of rebar in concrete and to obtain the crack patterns of the concrete with different rebar arrangements. Ruan et al. present a traffic load model for long span multi-pylon cable- stayed bridges. Khuc and Catbas implement a non-target vision- based method for the measurement of both static and dynamic displacements time histories. Finally, Cruz presents the career of the outstanding bridge engineer Edgar Cardoso in the fields of bridge design and experimental analysis. The book serves as a valuable reference to all concerned with bridge structure and infrastructure systems, including students, researchers, engineers, consultants and contractors from all areas sections of bridge engineering. The chapters originally published as a special issue in Structure and Infrastructure Engineering.
