Download or read book Analysis and Design of Multicell DC DC Converters Using Vectorized Models written by Thierry Meynard and published by John Wiley & Sons. This book was released on 2015-03-16 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shows how the concepts of vectorization and design masks can be used to help the designer in comparing different designs and making the right choices. The book addresses series and parallel multicell conversion directly, and the concepts can be generalized to describe other topologies.

Download or read book Analysis and Design of Multicell DC DC Converters Using Vectorized Models written by Thierry Meynard and published by John Wiley & Sons. This book was released on 2015-02-23 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shows how the concepts of vectorization and design masks can be used to help the designer in comparing different designs and making the right choices. The book addresses series and parallel multicell conversion directly, and the concepts can be generalized to describe other topologies.

Download or read book Electrical Energy Storage in Transportation Systems written by Benoît Robyns and published by John Wiley & Sons. This book was released on 2016-08-16 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the management and valuation of energy storage in electric power grids, highlighting the interest of storage systems in grid applications and developing management methodologies based on artificial intelligence tools. The authors highlight the importance of storing electrical energy, in the context of sustainable development, in "smart cities" and "smart transportation", and discuss multiple services that storing electrical energy can bring. Methodological tools are provided to build an energy management system storage following a generic approach. These tools are based on causal formalisms, artificial intelligence and explicit optimization techniques and are presented throughout the book in connection with concrete case studies.

Download or read book Analysis and Control of the Chaotic Behavior in a Multi Cell DC DC Buck Converter written by Karama Koubaâ and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Multi-cell power converters have been widely used in real applications since they circumvent shortcomings of ordinary switching devices due to their ability to support high-voltages. In this book, we deal with the case of an N-cell DC/DC buck converter, and we present a systematic method to control the voltage across the flying capacitors and the current through the load that can be generalized from a two-cell converter to an N-cell converter. The system was described by a discrete-time model through some simplifying assumptions to derive easily the general model in the form of a recurrence equation, which is useful in the design of control laws and exhibits chaotic behavior, bifurcations and strange phenomena when applying feedback control methods. In addition, the problem of the windup phenomenon, which is caused by the effect of switching, was discussed along with an anti-windup approach that was developed and successfully applied to the controlled DC/DC buck converter. A generalization of the various control laws adopted and a comparison between the results obtained with these methods were given, including the performance of the controlled system and the types of bifurcations encountered. Throughout this work, it has been shown that as the number of cells in the converter increases, the complexity of the uncontrolled system model and the closed loop system also increases"--

Download or read book Average Current Mode Control of DC DC Power Converters written by Marian K. Kazimierczuk and published by John Wiley & Sons. This book was released on 2022-03-14 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: AVERAGE CURRENT-MODE CONTROL OF DC-DC POWER CONVERTERS An authoritative one-stop guide to the analysis, design, development, and control of a variety of power converter systems Average Current-Mode Control of DC-DC Power Converters provides comprehensive and up-to-date information about average current-mode control (ACMC) of pulse-width modulated (PWM) dc-dc converters. This invaluable one-stop resource covers both fundamental and state-of-the-art techniques in average current-mode control of power electronic converters???featuring novel small-signal models of non-isolated and isolated converter topologies with joint and disjoint switching elements and coverage of frequency and time domain analysis of controlled circuits. The authors employ a systematic theoretical framework supported by step-by-step derivations, design procedures for measuring transfer functions, challenging end-of-chapter problems, easy-to-follow diagrams and illustrations, numerous examples for different power supply specifications, and practical tips for developing power-stage small-signal models using circuit-averaging techniques. The text addresses all essential aspects of modeling, design, analysis, and simulation of average current-mode control of power converter topologies, such as buck, boost, buck-boost, and flyback converters in operating continuous-conduction mode (CCM). Bridging the gap between fundamental modeling methods and their application in a variety of switched-mode power supplies, this book: Discusses the development of small-signal models and transfer functions related to the inner current and outer voltage loops Analyzes inner current loops with average current-mode control and describes their dynamic characteristics Presents dynamic properties of the poles and zeros, time-domain responses of the control circuits, and comparison of relevant modeling techniques Contains a detailed chapter on the analysis and design of control circuits in time-domain and frequency-domain Provides techniques required to produce professional MATLAB plots and schematics for circuit simulations, including example MATLAB codes for the complete design of PWM buck, boost, buck-boost, and flyback DC-DC converters Includes appendices with design equations for steady-state operation in CCM for power converters, parameters of commonly used power MOSFETs and diodes, SPICE models of selected MOSFETs and diodes, simulation tools including introductions to SPICE, MATLAB, and SABER, and MATLAB codes for transfer functions and transient responses Average Current-Mode Control of DC-DC Power Converters is a must-have reference and guide for researchers, advanced graduate students, and instructors in the area of power electronics, and for practicing engineers and scientists specializing in advanced circuit modeling methods for various converters at different operating conditions.

Download or read book Computer Techniques for Dynamic Modeling of DC DC Power Converters written by Farzin Asadi and published by Springer Nature. This book was released on 2022-06-01 with total page 75 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computers play an important role in the analyzing and designing of modern DC-DC power converters. This book shows how the widely used analysis techniques of averaging and linearization can be applied to DC-DC converters with the aid of computers. Obtained dynamical equations may then be used for control design. The book is composed of two chapters. Chapter 1 focuses on the extraction of control-to-output transfer function. A second-order converter (a buck converter) and a fourth-order converter (a Zeta converter) are studied as illustrative examples in this chapter. Both ready-to-use software packages, such as PLECS® and MATLAB® programming, are used throught this chapter. The input/output characteristics of DC-DC converters are the object of considerations in Chapter 2. Calculation of input/output impedance is done with the aid of MATLAB® programming in this chapter. The buck, buck-boost, and boost converter are the most popular types of DC-DC converters and used as illustrative examples in this chapter. This book can be a good reference for researchers involved in DC-DC converters dynamics and control.

Download or read book Dynamic Analysis of Switching mode DC DC Converters written by André S. Kislovski and published by . This book was released on 1995 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design and Implementation of Fully Integrated Inductive DC DC Converters in Standard CMOS written by Mike Wens and published by Springer Science & Business Media. This book was released on 2011-05-10 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: CMOS DC-DC Converters aims to provide a comprehensive dissertation on the matter of monolithic inductive Direct-Current to Direct-Current (DC-DC) converters. For this purpose seven chapters are defined which will allow the designer to gain specific knowledge on the design and implementation of monolithic inductive DC-DC converters, starting from the very basics.

Download or read book Impedance Source Power Electronic Converters written by Yushan Liu and published by John Wiley & Sons. This book was released on 2016-10-03 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Impedance Source Power Electronic Converters brings together state of the art knowledge and cutting edge techniques in various stages of research related to the ever more popular impedance source converters/inverters. Significant research efforts are underway to develop commercially viable and technically feasible, efficient and reliable power converters for renewable energy, electric transportation and for various industrial applications. This book provides a detailed understanding of the concepts, designs, controls, and application demonstrations of the impedance source converters/inverters. Key features: Comprehensive analysis of the impedance source converter/inverter topologies, including typical topologies and derived topologies. Fully explains the design and control techniques of impedance source converters/inverters, including hardware design and control parameter design for corresponding control methods. Presents the latest power conversion solutions that aim to advance the role of power electronics into industries and sustainable energy conversion systems. Compares impedance source converter/inverter applications in renewable energy power generation and electric vehicles as well as different industrial applications. Provides an overview of existing challenges, solutions and future trends. Supported by calculation examples, simulation models and results. Highly accessible, this is an invaluable resource for researchers, postgraduate/graduate students studying power electronics and its application in industry and renewable energy conversion as well as practising R&D engineers. Readers will be able to apply the presented material for the future design of the next generation of efficient power electronic converters/inverters.

Download or read book Switched Reluctance Motor Drives written by R. Krishnan and published by CRC Press. This book was released on 2017-12-19 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: The switched reluctance machine (SRM) is the least expensive electrical machine to produce, yet one of the most reliable. As such, research has blossomed during the last decade, and the SRM and variable drive systems using SRMs are receiving considerable attention from industry. Because they require a power electronic converter and controller to function, however, successful realization of an SRM variable drive system demands an understanding of the converter and controller subsystems and their integration with the machine. Switched Reluctance Motor Drives provides that understanding. It presents a unified view of the machine and its drive system from all of its system and subsystem aspects. With a careful balance of theory and implementation, the author develops the analysis and design of SRMs from first principles, introduces a wide variety of power converters available for driving the SRM, and systematically presents both low- and high-performance controllers. The book includes an in-depth study of acoustic noise and its minimization along with application examples that include comparisons between ac and dc drives and SRM drive. The result is the first book that provides a state-of-the-art knowledge of SRMs, power converters, and their use with both sensor-based and sensorless controllers. Switched Reluctance Motor Drives enables both students and engineers to learn all aspects of SRM drive systems and appreciate the interdependence of the various subsystems in performance optimization.

Download or read book Power Electronic Converters written by Robert Bausiere and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is the third in a series of four devoted to POWER ELECTRONIC CONVERTERS: The first of these concerns AC to DC conversion. The second concerns AC to AC conversion. This volume examines DC to DC conversion. The fourth is devoted to DC to AC conversion. Converters which carry out the DC-DC conversion operate by chopping the input voltage or current: they are called choppers or switch-mode power converters. Their operating frequency is not imposed by either the input or the output, both of which are at zero frequency. A frequency which is much greater than that of the industrial network can be chosen, provided that suitable configurations and semiconductor devices are used. This is the first difference compared to the rectifiers and AC-AC converters, analyzed in the previous volumes and which often operate at the industrial network frequency. The second difference concerns the commutation mode. Choppers operate in forced commutation. The beginning of an operating phase does not auto matically turn off the semiconductor devices which were conducting during the previous phase and which have to be brought to the blocking state. This turn-off must be carried out autonomously. These two differences - the higher frequency of commutations and, espe cially, the different mode of commutation -justify the first two chapters in this work: - Chapter 1 examines general notions concerning converters, supplies and loads, and more especially, how they can be characterized with regard to commutations.

Download or read book Pulsewidth Modulated DC to DC Power Conversion written by Byungcho Choi and published by John Wiley & Sons. This book was released on 2013-07-30 with total page 657 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the definitive reference for anyone involved in pulsewidth modulated DC-to-DC power conversion Pulsewidth Modulated DC-to-DC Power Conversion: Circuits, Dynamics, and Control Designs provides engineers, researchers, and students in the power electronics field with comprehensive and complete guidance to understanding pulsewidth modulated (PWM) DC-to-DC power converters. Presented in three parts, the book addresses the circuitry and operation of PWM DC-to-DC converters and their dynamic characteristics, along with in-depth discussions of control design of PWM DC-to-DC converters. Topics include: Basics of DC-to-DC power conversion DC-to-DC converter circuits Dynamic modeling Power stage dynamics Closed-loop performance Voltage mode control and feedback design Current mode control and compensation design Sampling effects of current mode control Featuring fully tested problems and simulation examples as well as downloadable lecture slides and ready-to-run PSpice programs, Pulsewidth Modulated DC-to-DC Power Conversion is an ideal reference book for professional engineers as well as graduate and undergraduate students.

Download or read book Microelectronic Circuits written by Muhammad H. Rashid and published by . This book was released on 2011 with total page 1100 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design Control and Application of Modular Multilevel Converters for HVDC Transmission Systems written by Kamran Sharifabadi and published by John Wiley & Sons. This book was released on 2016-08-22 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design, Control and Application of Modular Multilevel Converters for HVDC Transmission Systems is a comprehensive guide to semiconductor technologies applicable for MMC design, component sizing control, modulation, and application of the MMC technology for HVDC transmission. Separated into three distinct parts, the first offers an overview of MMC technology, including information on converter component sizing, Control and Communication, Protection and Fault Management, and Generic Modelling and Simulation. The second covers the applications of MMC in offshore WPP, including planning, technical and economic requirements and optimization options, fault management, dynamic and transient stability. Finally, the third chapter explores the applications of MMC in HVDC transmission and Multi Terminal configurations, including Supergrids. Key features: Unique coverage of the offshore application and optimization of MMC-HVDC schemes for the export of offshore wind energy to the mainland. Comprehensive explanation of MMC application in HVDC and MTDC transmission technology. Detailed description of MMC components, control and modulation, different modeling approaches, converter dynamics under steady-state and fault contingencies including application and housing of MMC in HVDC schemes for onshore and offshore. Analysis of DC fault detection and protection technologies, system studies required for the integration of HVDC terminals to offshore wind power plants, and commissioning procedures for onshore and offshore HVDC terminals. A set of self-explanatory simulation models for HVDC test cases is available to download from the companion website. This book provides essential reading for graduate students and researchers, as well as field engineers and professionals who require an in-depth understanding of MMC technology.

Download or read book Switchmode Power Supply Handbook written by Keith Billings and published by McGraw-Hill Professional. This book was released on 1999 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unarguably the leading hands-on guide in this rapidly expanding area of electronics, Keith Billings' new revision of his Switchmode Power Supply Handbook brings state-of-the-art techniques and developments to engineers at all levels. Offering sound working knowledge of the latest in topologies and clear, step-by-step approaches to component decisions, this Handbook gives power supply designers practical, solutions-oriented design guidance free of unnecessarily complicated mathematical derivations and theory. This thoroughly updated Handbook features many new fully worked examples, as well as numerous nomograms--everything you need to design today's smaller, faster, and cooler systems. Turn to just about any page, and you'll find cutting-edge design expertise on electronic ballast, power factor correction, new thermal management techniques, transformers, chokes, input filters, EMI control, converters, snubber circuits, auxiliary systems, and much more. The most comprehensive book on power supply design available anywhere, Switchmode Power Supply Handbook is the industry standard, now fully updated for the 21st century.

Download or read book The Vienna LTE Advanced Simulators written by Markus Rupp and published by Springer. This book was released on 2016-03-23 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the Vienna Simulator Suite for 3rd-Generation Partnership Project (3GPP)-compatible Long Term Evolution-Advanced (LTE-A) simulators and presents applications to demonstrate their uses for describing, designing, and optimizing wireless cellular LTE-A networks. Part One addresses LTE and LTE-A link level techniques. As there has been high demand for the downlink (DL) simulator, it constitutes the central focus of the majority of the chapters. This part of the book reports on relevant highlights, including single-user (SU), multi-user (MU) and single-input-single-output (SISO) as well as multiple-input-multiple-output (MIMO) transmissions. Furthermore, it summarizes the optimal pilot pattern for high-speed communications as well as different synchronization issues. One chapter is devoted to experiments that show how the link level simulator can provide input to a testbed. This section also uses measurements to present and validate fundamental results on orthogonal frequency division multiplexing (OFDM) transmissions that are not limited to LTE-A. One chapter exclusively deals with the newest tool, the uplink (UL) link level simulator, and presents cutting-edge results. In turn, Part Two focuses on system-level simulations. From early on, system-level simulations have been in high demand, as people are naturally seeking answers when scenarios with numerous base stations and hundreds of users are investigated. This part not only explains how mathematical abstraction can be employed to speed up simulations by several hundred times without sacrificing precision, but also illustrates new theories on how to abstract large urban heterogeneous networks with indoor small cells. It also reports on advanced applications such as train and car transmissions to demonstrate the tools’ capabilities.

Download or read book Advanced DC AC Inverters written by Fang Lin Luo and published by CRC Press. This book was released on 2017-07-28 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: DC/AC inversion technology is of vital importance for industrial applications, including electrical vehicles and renewable energy systems, which require a large number of inverters. In recent years, inversion technology has developed rapidly, with new topologies improving the power factor and increasing power efficiency. Proposing many novel approaches, Advanced DC/AC Inverters: Applications in Renewable Energy describes advanced DC/AC inverters that can be used for renewable energy systems. The book introduces more than 100 topologies of advanced inverters originally developed by the authors, including more than 50 new circuits. It also discusses recently published cutting-edge topologies. Novel PWM and Multilevel Inverters The book first covers traditional pulse-width-modulation (PWM) inverters before moving on to new quasi-impedance source inverters and soft-switching PWM inverters. It then examines multilevel DC/AC inverters, which have overcome the drawbacks of PWM inverters and provide greater scope for industrial applications. The authors propose four novel multilevel inverters: laddered multilevel inverters, super-lift modulated inverters, switched-capacitor inverters, and switched-inductor inverters. With simple structures and fewer components, these inverters are well suited for renewable energy systems. Get the Best Switching Angles for Any Multilevel Inverter A key topic for multilevel inverters is the need to manage the switching angles to obtain the lowest total harmonic distortion (THD). The authors outline four methods for finding the best switching angles and use simulation waveforms to verify the design. The optimum switching angles for multilevel DC/AC inverters are also listed in tables for quick reference. Application Examples of DC/AC Inverters in Renewable Energy Systems Highlighting the importance of inverters in improving energy saving and power-supply quality, the final chapter of the book supplies design examples for applications in wind turbine and solar panel energy systems. Written by pioneers in advanced conversion and inversion technology, this book guides readers in designing more effective DC/AC inverters for use in renewable energy systems.