Download or read book Analysis and Design of High speed CMOS Frequency Dividers written by Fatemehe Molainezhad and published by . This book was released on 2015 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt: A frequency divider is one of the most fundamental and challenging blocks used in high-speed communication systems. Three high-speed dividers with different topologies, LC-tank frequency divider, CML ring frequency divider, and CML DFF frequency divider with negative feedback, are analyzed based on the locking phenomena. The locking to the injected signal happens as long as the frequency and the amplitude of the injected signal are in the desired operation region of the divider's sensitivity curve. A phase shift (which is a function of both frequency and the amplitude of the injected signal) occurs in the circuit and the divider will be locked to the injected frequency. Locking to an external signal may not necessarily occur just by considering the frequency of the injection signal being in the locking range, even if the frequency of the injection signal is very close to the self-oscillation frequency in a wide locking range scenario without the proper injected signal amplitude. To measure the phase shift when the oscillator is locked to the injected frequency, a novel procedure is developed. This procedure gives us a very precise tool to measure the locking phase, instantaneous phase, or the phase between any two signals inside the topology loop and provides a good ability for better understanding of the injection locking concept and the behavior of the divider in the presence of an injected signal. The simulations are using transistor models from TSMC 65nm CMOS process.
Download or read book Multi Standard CMOS Wireless Receivers Analysis and Design written by Xiaopeng Li and published by Springer Science & Business Media. This book was released on 2005-12-19 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book on the subject of multi-standard wireless receivers. It covers both the analysis and design aspects of CMOS radio receivers, with primary focus on receivers for mobile terminals. The subject of multi-standard data converter design for base stations is also covered.
Download or read book Design and Analysis of Millimeter wave CMOS Frequency Dividers and Phase Locked Loop for 60 GHz Wireless written by Yuan Mo and published by . This book was released on 2009 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CMOS PLL Synthesizers Analysis and Design written by Keliu Shu and published by Springer Science & Business Media. This book was released on 2006-01-20 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thanks to the advance of semiconductor and communication technology, the wireless communication market has been booming in the last two decades. It evolved from simple pagers to emerging third-generation (3G) cellular phones. In the meanwhile, broadband communication market has also gained a rapid growth. As the market always demands hi- performance and low-cost products, circuit designers are seeking hi- integration communication devices in cheap CMOS technology. The phase-locked loop frequency synthesizer is a critical component in communication devices. It works as a local oscillator for frequency translation and channel selection in wireless transceivers and broadband cable tuners. It also plays an important role as the clock synthesizer for data converters in the analog-and-digital signal interface. This book covers the design and analysis of PLL synthesizers. It includes both fundamentals and a review of the state-of-the-art techniques. The transient analysis of the third-order charge-pump PLL reveals its locking behavior accurately. The behavioral-level simulation of PLL further clarifies its stability limit. Design examples are given to clearly illustrate the design procedure of PLL synthesizers. A complete derivation of reference spurs in the charge-pump PLL is also presented in this book. The in-depth investigation of the digital CA modulator for fractional-N synthesizers provides insightful design guidelines for this important block.
Download or read book Micro and Nanoelectronics Devices Circuits and Systems written by Trupti Ranjan Lenka and published by Springer Nature. This book was released on 2021-09-09 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents select proceedings of the International Conference on Micro and Nanoelectronics Devices, Circuits and Systems (MNDCS-2021). The volume includes cutting-edge research papers in the emerging fields of micro and nanoelectronics devices, circuits, and systems from experts working in these fields over the last decade. The book is a unique collection of chapters from different areas with a common theme and will be immensely useful to academic researchers and practitioners in the industry who work in this field.
Download or read book Design of a CMOS VCO and Frequency Divider for 5 GHz Applications written by Prithvi Shylendra and published by . This book was released on 2006 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents the design of a new CMOS Voltage Controlled Oscillator and a frequency divider, both of which form important blocks in the design of a PLL synthesizer. These components are important because they operate at the highest frequencies within the PLL and also consume most of the power as compared to the other components. Both these circuits have been an active topic of research in recent years especially with the scaling of technology bringing hopes of complete system-on-chip (SOC) integration at RF frequencies. The circuits in this thesis are designed for 5 GHz applications, mainly for the IEEE Wireless Local Area Network (WLAN) 802.11a standard which spans the frequency range from 5.14 GHz to 5.72 GHz. The first part of the thesis is an introduction to receiver architectures, VCO's and frequency dividers in general. The second part deals with the design, analysis and simulation results of a novel VCO presented in this work. The VCO achieves a tuning range of 130 MHz around a center frequency of 5.70 GHz and a low phase noise of -114 dBc/Hz at an offset of 1 MHz. The third part presents the design approach adopted here to designing a high frequency divider using dynamic logic and its simulation results. The logic used here is True Single Phase Clocking (TSPC), which makes use of a single clock thereby avoiding the problems of clock skew and loading. Two main blocks have been presented, the divide-by-2 and divide-by-2/3. These blocks are then cascaded to achieve higher division ratios.
Download or read book Transformer Based Design Techniques for Oscillators and Frequency Dividers written by Howard Cam Luong and published by Springer. This book was released on 2015-10-07 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides in-depth coverage of transformer-based design techniques that enable CMOS oscillators and frequency dividers to achieve state-of-the-art performance. Design, optimization, and measured performance of oscillators and frequency dividers for different applications are discussed in detail, focusing on not only ultra-low supply voltage but also ultra-wide frequency tuning range and locking range. This book will be an invaluable reference for anyone working or interested in CMOS radio-frequency or mm-Wave integrated circuits and systems.
Download or read book CMOS Single Chip Fast Frequency Hopping Synthesizers for Wireless Multi Gigahertz Applications written by Taoufik Bourdi and published by Springer Science & Business Media. This book was released on 2007-03-06 with total page 215 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, the authors outline detailed design methodology for fast frequency hopping synthesizers for RF and wireless communications applications. There is great emphasis on fractional-N delta-sigma based phase locked loops from specifications, system analysis and architecture planning to circuit design and silicon implementation. The developed techniques in the book can help in designing very low noise, high speed fractional-N frequency synthesizers.
Download or read book Analysis and Design of CMOS Clocking Circuits For Low Phase Noise written by Woorham Bae and published by Institution of Engineering and Technology. This book was released on 2020-06-24 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: As electronics continue to become faster, smaller and more efficient, development and research around clocking signals and circuits has accelerated to keep pace. This book bridges the gap between the classical theory of clocking circuits and recent technological advances, making it a useful guide for newcomers to the field, and offering an opportunity for established researchers to broaden and update their knowledge of current trends.
Download or read book High Speed CMOS Design Styles written by Kerry Bernstein and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: High Speed CMOS Design Styles is written for the graduate-level student or practicing engineer who is primarily interested in circuit design. It is intended to provide practical reference, or `horse-sense', to mechanisms typically described with a more academic slant. This book is organized so that it can be used as a textbook or as a reference book. High Speed CMOS Design Styles provides a survey of design styles in use in industry, specifically in the high speed microprocessor design community. Logic circuit structures, I/O and interface, clocking, and timing schemes are reviewed and described. Characteristics, sensitivities and idiosyncrasies of each are highlighted. High Speed CMOS Design Styles also pulls together and explains contributors to performance variability that are associated with process, applications conditions and design. Rules of thumb and practical references are offered. Each of the general circuit families is then analyzed for its sensitivity and response to this variability. High Speed CMOS Design Styles is an excellent source of ideas and a compilation of observations that highlight how different approaches trade off critical parameters in design and process space.
Download or read book Low Power Wireless Communication Circuits and Systems written by Kiat Seng Yeo and published by CRC Press. This book was released on 2018-05-03 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing demand for extremely high-data-rate communications has urged researchers to develop new communication systems. Currently, wireless transmission with more than one Giga-bits-per-second (Gbps) data rates is becoming essential due to increased connectivity between different portable and smart devices. To realize Gbps data rates, millimeter-wave (MMW) bands around 60 GHz is attractive due to the availability of large bandwidth of 9 GHz. Recent research work in the Gbps data rates around 60 GHz band has focused on short-range indoor applications, such as uncompressed video transfer, high-speed file transfer between electronic devices, and communication to and from kiosk. Many of these applications are limited to 10 m or less, because of the huge free space path loss and oxygen absorption for 60 GHz band MMW signal. This book introduces new knowledge and novel circuit techniques to design low-power MMW circuits and systems. It also focuses on unlocking the potential applications of the 60 GHz band for high-speed outdoor applications. The innovative design application significantly improves and enables high-data-rate low-cost communication links between two access points seamlessly. The 60 GHz transceiver system-on-chip provides an alternative solution to upgrade existing networks without introducing any building renovation or external network laying works.
Download or read book CMOS Fractional N Synthesizers written by Bram De Muer and published by Springer Science & Business Media. This book was released on 2005-12-29 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: CMOS Fractional-N Synthesizers starts with a comprehensive introduction to general frequency synthesis. Different architectures and synthesizer building blocks are discussed with their relative importance on synthesizer specifications. The process of synthesizer specification derivation is illustrated with the DCS-1800 standard as a general test case. The book tackles the design of fractional-N synthesizers in CMOS on circuit level as well as system level. The circuit level focuses on high-speed prescaler design up to 12 GHz in CMOS and on fully integrated, low-phase-noise LC-VCO design. High-Q inductor integration and simulation in CMOS is elaborated and flicker noise minimization techniques are presented, ranging from bias point choice to noise filtering techniques. On a higher level, a systematic design strategy has been developed that trades off all noise contributions and fast dynamics for integrated capacitance (area). Moreover, a theoretical DeltaSigma phase noise analysis is presented, extended with a fast non-linear analysis method to accurately predict the influence of PLL non-linearities on the spectral purity of the DeltaSigma fractional-N frequency synthesizers.
Download or read book Ultra High Speed CMOS Circuits written by Sam Gharavi and published by Springer Science & Business Media. This book was released on 2011-09-25 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers the CMOS-based millimeter wave circuits and devices and presents methods and design techniques to use CMOS technology for circuits operating beyond 100 GHz. Coverage includes a detailed description of both active and passive devices, including modeling techniques and performance optimization. Various mm-wave circuit blocks are discussed, emphasizing their design distinctions from low-frequency design methodologies. This book also covers a device-oriented circuit design technique that is essential for ultra high speed circuits and gives some examples of device/circuit co-design that can be used for mm-wave technology.
Download or read book Design of High speed Communication Circuits written by Ramesh Harjani and published by World Scientific. This book was released on 2006 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: MOS technology has rapidly become the de facto standard for mixed-signal integrated circuit design due to the high levels of integration possible as device geometries shrink to nanometer scales. The reduction in feature size means that the number of transistor and clock speeds have increased significantly. In fact, current day microprocessors contain hundreds of millions of transistors operating at multiple gigahertz. Furthermore, this reduction in feature size also has a significant impact on mixed-signal circuits. Due to the higher levels of integration, the majority of ASICs possesses some analog components. It has now become nearly mandatory to integrate both analog and digital circuits on the same substrate due to cost and power constraints. This book presents some of the newer problems and opportunities offered by the small device geometries and the high levels of integration that is now possible. The aim of this book is to summarize some of the most critical aspects of high-speed analog/RF communications circuits. Attention is focused on the impact of scaling, substrate noise, data converters, RF and wireless communication circuits and wireline communication circuits, including high-speed I/O. Contents: Achieving Analog Accuracy in Nanometer CMOS (M P Flynn et al.); Self-Induced Noise in Integrated Circuits (R Gharpurey & S Naraghi); High-Speed Oversampling Analog-to-Digital Converters (A Gharbiya et al.); Designing LC VCOs Using Capacitive Degeneration Techniques (B Jung & R Harjani); Fully Integrated Frequency Synthesizers: A Tutorial (S T Moon et al.); Recent Advances and Design Trends in CMOS Radio Frequency Integrated Circuits (D J Allstot et al.); Equalizers for High-Speed Serial Links (P K Hanumolu et al.); Low-Power, Parallel Interface with Continuous-Time Adaptive Passive Equalizer and Crosstalk Cancellation (C P Yue et al.). Readership: Technologists, scientists, and engineers in the field of high-speed communication circuits. It can also be used as a textbook for graduate and advanced undergraduate courses.
Download or read book VLSI Communication and Signal Processing written by R. K. Nagaria and published by Springer Nature. This book was released on 2023-07-01 with total page 867 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers a variety of topics in Electronics and Communication Engineering, especially in the area of microelectronics and VLSI design, communication systems and networks, and signal and image processing. The content is based on papers presented at the 5th International Conference on VLSI, Communication and Signal Processing (VCAS 2022). The book also discusses the emerging applications of novel tools and techniques in image, video, and multimedia signal processing. This book is useful to students, researchers, and professionals working in the electronics and communication domain.
Download or read book Design Methodology for RF CMOS Phase Locked Loops written by Carlos Quemada and published by Artech House. This book was released on 2009 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: After a review of PLL essentials, this uniquely comprehensive workbench guide takes you step-by-step through operation principles, design procedures, phase noise analysis, layout considerations, and CMOS realizations for each PLL building block. You get full details on LC tank oscillators including modeling and optimization techniques, followed by design options for CMOS frequency dividers covering flip-flop implementation, the divider by 2 component, and other key factors. The book includes design alternatives for phase detectors that feature methods to minimize jitter caused by the dead zone effect. You also find a sample design of a fully integrated PLL for WLAN applications that demonstrates every step and detail right down to the circuit schematics and layout diagrams. Supported by over 150 diagrams and photos, this one-stop toolkit helps you produce superior PLL designs faster, and deliver more effective solutions for low-cost integrated circuits in all RF applications.
Download or read book Wireless CMOS Frequency Synthesizer Design written by J. Craninckx and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: The recent boom in the mobile telecommunication market has trapped the interest of almost all electronic and communication companies worldwide. New applications arise every day, more and more countries are covered by digital cellular systems and the competition between the several providers has caused prices to drop rapidly. The creation of this essentially new market would not have been possible without the ap pearance of smalI, low-power, high-performant and certainly low-cost mobile termi nals. The evolution in microelectronics has played a dominant role in this by creating digital signal processing (DSP) chips with more and more computing power and com bining the discrete components of the RF front-end on a few ICs. This work is situated in this last area, i. e. the study of the full integration of the RF transceiver on a single die. Furthermore, in order to be compatible with the digital processing technology, a standard CMOS process without tuning, trimming or post-processing steps must be used. This should flatten the road towards the ultimate goal: the single chip mobile phone. The local oscillator (LO) frequency synthesizer poses some major problems for integration and is the subject of this work. The first, and also the largest, part of this text discusses the design of the Voltage Controlled Oscillator (VCO). The general phase noise theory of LC-oscillators is pre sented, and the concept of effective resistance and capacitance is introduced to char acterize and compare the performance of different LC-tanks.
