Download or read book Analysis and Design of Descriptor Linear Systems written by Guang-Ren Duan and published by Springer Science & Business Media. This book was released on 2010-09-14 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Descriptor linear systems theory is an important part in the general field of control systems theory, and has attracted much attention in the last two decades. In spite of the fact that descriptor linear systems theory has been a topic very rich in content, there have been only a few books on this topic. This book provides a systematic introduction to the theory of continuous-time descriptor linear systems and aims to provide a relatively systematic introduction to the basic results in descriptor linear systems theory. The clear representation of materials and a large number of examples make this book easy to understand by a large audience. General readers will find in this book a comprehensive introduction to the theory of descriptive linear systems. Researchers will find a comprehensive description of the most recent results in this theory and students will find a good introduction to some important problems in linear systems theory.

Download or read book Robust Control of Linear Descriptor Systems written by Yu Feng and published by Springer. This book was released on 2017-03-02 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book develops original results regarding singular dynamic systems following two different paths. The first consists of generalizing results from classical state-space cases to linear descriptor systems, such as dilated linear matrix inequality (LMI) characterizations for descriptor systems and performance control under regulation constraints. The second is a new path, which considers descriptor systems as a powerful tool for conceiving new control laws, understanding and deciphering some controller’s architecture and even homogenizing different—existing—ways of obtaining some new and/or known results for state-space systems. The book also highlights the comprehensive control problem for descriptor systems as an example of using the descriptor framework in order to transform a non-standard control problem into a classic stabilization control problem. In another section, an accurate solution is derived for the sensitivity constrained linear optimal control also using the descriptor framework. The book is intended for graduate and postgraduate students, as well as researchers in the field of systems and control theory.

Download or read book LMIs in Control Systems written by Guang-Ren Duan and published by CRC Press. This book was released on 2013-06-17 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although LMI has emerged as a powerful tool with applications across the major domains of systems and control, there has been a need for a textbook that provides an accessible introduction to LMIs in control systems analysis and design. Filling this need, LMIs in Control Systems: Analysis, Design and Applications focuses on the basic analysis and d

Download or read book Complex Conjugate Matrix Equations for Systems and Control written by Ai-Guo Wu and published by Springer. This book was released on 2016-08-08 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is the first book on complex matrix equations including the conjugate of unknown matrices. The study of these conjugate matrix equations is motivated by the investigations on stabilization and model reference tracking control for discrete-time antilinear systems, which are a particular kind of complex system with structure constraints. It proposes useful approaches to obtain iterative solutions or explicit solutions for several types of complex conjugate matrix equation. It observes that there are some significant differences between the real/complex matrix equations and the complex conjugate matrix equations. For example, the solvability of a real Sylvester matrix equation can be characterized by matrix similarity; however, the solvability of the con-Sylvester matrix equation in complex conjugate form is related to the concept of con-similarity. In addition, the new concept of conjugate product for complex polynomial matrices is also proposed in order to establish a unified approach for solving a type of complex matrix equation.

Download or read book Descriptor Systems of Integer and Fractional Orders written by Tadeusz Kaczorek and published by Springer Nature. This book was released on 2021-04-13 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers some selected problems of the descriptor integer and fractional order positive continuous-time and discrete-time systems. The book consists of 3 chapters, 4 appendices and the list of references. Chapter 1 is devoted to descriptor integer order continuous-time and discrete-time linear systems. In Chapter 2, descriptor fractional order continuous-time and discrete-time linear systems are considered. Chapter 3 is devoted to the stability of descriptor continuous-time and discrete-time systems of integer and fractional orders. In Appendix A, extensions of the Cayley–Hamilton theorem for descriptor linear systems are given. Some methods for computation of the Drazin inverse are presented in Appendix B. In Appendix C, some basic definitions and theorems on Laplace transforms and Z-transforms are given. Some properties of the nilpotent matrices are given in Appendix D.

Download or read book Proceedings of Ninth International Congress on Information and Communication Technology written by Xin-She Yang and published by Springer Nature. This book was released on with total page 636 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Generalized Sylvester Equations written by Guang-Ren Duan and published by CRC Press. This book was released on 2015-06-09 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides One Unified Formula That Gives Solutions to Several Types of GSEsGeneralized Sylvester equations (GSEs) are applied in many fields, including applied mathematics, systems and control, and signal processing. Generalized Sylvester Equations: Unified Parametric Solutions presents a unified parametric approach for solving various types of GSEs

Download or read book Introduction to Linear Control Systems written by Yazdan Bavafa-Toosi and published by Academic Press. This book was released on 2017-09-19 with total page 1135 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Linear Control Systems is designed as a standard introduction to linear control systems for all those who one way or another deal with control systems. It can be used as a comprehensive up-to-date textbook for a one-semester 3-credit undergraduate course on linear control systems as the first course on this topic at university. This includes the faculties of electrical engineering, mechanical engineering, aerospace engineering, chemical and petroleum engineering, industrial engineering, civil engineering, bio-engineering, economics, mathematics, physics, management and social sciences, etc. The book covers foundations of linear control systems, their raison detre, different types, modelling, representations, computations, stability concepts, tools for time-domain and frequency-domain analysis and synthesis, and fundamental limitations, with an emphasis on frequency-domain methods. Every chapter includes a part on further readings where more advanced topics and pertinent references are introduced for further studies. The presentation is theoretically firm, contemporary, and self-contained. Appendices cover Laplace transform and differential equations, dynamics, MATLAB and SIMULINK, treatise on stability concepts and tools, treatise on Routh-Hurwitz method, random optimization techniques as well as convex and non-convex problems, and sample midterm and endterm exams. The book is divided to the sequel 3 parts plus appendices. PART I: In this part of the book, chapters 1-5, we present foundations of linear control systems. This includes: the introduction to control systems, their raison detre, their different types, modelling of control systems, different methods for their representation and fundamental computations, basic stability concepts and tools for both analysis and design, basic time domain analysis and design details, and the root locus as a stability analysis and synthesis tool. PART II: In this part of the book, Chapters 6-9, we present what is generally referred to as the frequency domain methods. This refers to the experiment of applying a sinusoidal input to the system and studying its output. There are basically three different methods for representation and studying of the data of the aforementioned frequency response experiment: these are the Nyquist plot, the Bode diagram, and the Krohn-Manger-Nichols chart. We study these methods in details. We learn that the output is also a sinusoid with the same frequency but generally with different phase and magnitude. By dividing the output by the input we obtain the so-called sinusoidal or frequency transfer function of the system which is the same as the transfer function when the Laplace variable s is substituted with . Finally we use the Bode diagram for the design process. PART III: In this part, Chapter 10, we introduce some miscellaneous advanced topics under the theme fundamental limitations which should be included in this undergraduate course at least in an introductory level. We make bridges between some seemingly disparate aspects of a control system and theoretically complement the previously studied subjects. Appendices: The book contains seven appendices. Appendix A is on the Laplace transform and differential equations. Appendix B is an introduction to dynamics. Appendix C is an introduction to MATLAB, including SIMULINK. Appendix D is a survey on stability concepts and tools. A glossary and road map of the available stability concepts and tests is provided which is missing even in the research literature. Appendix E is a survey on the Routh-Hurwitz method, also missing in the literature. Appendix F is an introduction to random optimization techniques and convex and non-convex problems. Finally, appendix G presents sample midterm and endterm exams, which are class-tested several times.

Download or read book Algorithms and Architectures for Real Time Control 1992 written by P.J. Fleming and published by Elsevier. This book was released on 2014-05-23 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Workshop focuses on such issues as control algorithms which are suitable for real-time use, computer architectures which are suitable for real-time control algorithms, and applications for real-time control issues in the areas of parallel algorithms, multiprocessor systems, neural networks, fault-tolerance systems, real-time robot control identification, real-time filtering algorithms, control algorithms, fuzzy control, adaptive and self-tuning control, and real-time control applications.

Download or read book Analysis and Design of Singular Markovian Jump Systems written by Guoliang Wang and published by Springer. This book was released on 2014-07-17 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph is an up-to-date presentation of the analysis and design of singular Markovian jump systems (SMJSs) in which the transition rate matrix of the underlying systems is generally uncertain, partially unknown and designed. The problems addressed include stability, stabilization, H∞ control and filtering, observer design, and adaptive control. applications of Markov process are investigated by using Lyapunov theory, linear matrix inequalities (LMIs), S-procedure and the stochastic Barbalat’s Lemma, among other techniques. Features of the book include: · study of the stability problem for SMJSs with general transition rate matrices (TRMs); · stabilization for SMJSs by TRM design, noise control, proportional-derivative and partially mode-dependent control, in terms of LMIs with and without equation constraints; · mode-dependent and mode-independent H∞ control solutions with development of a type of disordered controller; · observer-based controllers of SMJSs in which both the designed observer and controller are either mode-dependent or mode-independent; · consideration of robust H∞ filtering in terms of uncertain TRM or filter parameters leading to a method for totally mode-independent filtering · development of LMI-based conditions for a class of adaptive state feedback controllers with almost-certainly-bounded estimated error and almost-certainly-asymptotically-stable corres ponding closed-loop system states · applications of Markov process on singular systems with norm bounded uncertainties and time-varying delays Analysis and Design of Singular Markovian Jump Systems contains valuable reference material for academic researchers wishing to explore the area. The contents are also suitable for a one-semester graduate course.

Download or read book Linear Systems Theory written by Ben M. Chen and published by Springer Science & Business Media. This book was released on 2004-08-27 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes MATLAB-based computational and design algorithms utilizing the "Linear Systems Toolkit." All results and case studies presented in both the continuous- and discrete-time settings.

Download or read book Fuzzy Control Systems Design and Analysis written by Kazuo Tanaka and published by John Wiley & Sons. This book was released on 2004-04-07 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive treatment of model-based fuzzy control systems This volume offers full coverage of the systematic framework for the stability and design of nonlinear fuzzy control systems. Building on the Takagi-Sugeno fuzzy model, authors Tanaka and Wang address a number of important issues in fuzzy control systems, including stability analysis, systematic design procedures, incorporation of performance specifications, numerical implementations, and practical applications. Issues that have not been fully treated in existing texts, such as stability analysis, systematic design, and performance analysis, are crucial to the validity and applicability of fuzzy control methodology. Fuzzy Control Systems Design and Analysis addresses these issues in the framework of parallel distributed compensation, a controller structure devised in accordance with the fuzzy model. This balanced treatment features an overview of fuzzy control, modeling, and stability analysis, as well as a section on the use of linear matrix inequalities (LMI) as an approach to fuzzy design and control. It also covers advanced topics in model-based fuzzy control systems, including modeling and control of chaotic systems. Later sections offer practical examples in the form of detailed theoretical and experimental studies of fuzzy control in robotic systems and a discussion of future directions in the field. Fuzzy Control Systems Design and Analysis offers an advanced treatment of fuzzy control that makes a useful reference for researchers and a reliable text for advanced graduate students in the field.

Download or read book Theoretical Developments and Applications of Non Integer Order Systems written by Stefan Domek and published by Springer. This book was released on 2015-08-20 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is devoted to presentation of new results of research on systems of non-integer order, called also fractional systems. Their analysis and practical implementation have been the object of spontaneous development for a few last decades. The fractional order models can depict a physical plant better than the classical integer order ones. This covers different research fields such as insulator properties, visco-elastic materials, electrodynamic, electrothermal, electrochemical, economic processes modelling etc. On the other hand fractional controllers often outperform their integer order counterparts. This volume contains new ideas and examples of implementation, theoretical and pure practical aspects of using a non-integer order calculus. It is divided into four parts covering: mathematical fundamentals, modeling and approximations, controllability, observability and stability problems and practical applications of fractional control systems. The first part expands the base of tools and methods of the mathematical basis for non-integer order calculus. Part two focuses on new methods and developments in process modeling and fractional derivatives approximations. In the third part a bunch of papers which raise problems of controllability, observability and stability of non-integer order systems is provided. Part four is devoted to presentation of different fractional order control applications. This book was created thanks to many experts in the field of fractional calculus: authors, anonymous referees whose comments allowed us to improve the final form of the papers and active and inspiring discussion of the participants of RRNR'2015, the 7th Conference on Non-Integer Order Calculus and Its Applications that was organized by the Faculty of Electrical Engineering, West Pomeranian University of Technology, Szczecin, Poland.

Download or read book Control and Optimization with Differential Algebraic Constraints written by Lorenz T. Biegler and published by SIAM. This book was released on 2012-01-01 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Differential-algebraic equations are the most natural way to mathematically model many complex systems in science and engineering. Once the model is derived, it is important to optimize the design parameters and control it in the most robust and efficient way to maximize performance. This book presents the latest theory and numerical methods for the optimal control of differential-algebraic equations. The following features are presented in a readable fashion so the results are accessible to the widest audience: the most recent theory, written by leading experts from a number of academic and nonacademic areas and departments; several state-of-the-art numerical methods; and real-world applications.

Download or read book Automation 2017 written by Roman Szewczyk and published by Springer. This book was released on 2017-02-28 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of papers presented at Automation 2017, an international conference held in Warsaw from March 15 to 17, 2017. It discusses research findings associated with the concepts behind INDUSTRY 4.0, with a focus on offering a better understanding of and promoting participation in the Fourth Industrial Revolution. Each chapter presents a detailed analysis of a specific technical problem, in most cases followed by a numerical analysis, simulation and description of the results of implementing the solution in a real-world context. The theoretical results, practical solutions and guidelines presented are valuable for both researchers working in the area of engineering sciences and practitioners looking for solutions to industrial problems.

Download or read book Automation 2018 written by Roman Szewczyk and published by Springer. This book was released on 2018-03-07 with total page 803 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book consists of papers presented at Automation 2018, an international conference held in Warsaw from March 21 to 23, 2018. It discusses the radical technological changes occurring due to the INDUSTRY 4.0, with a focus on offering a better understanding of the Fourth Industrial Revolution. Each chapter presents a detailed analysis of interdisciplinary knowledge, numerical modeling and simulation as well as the application of cyber-physical systems, where information technology and physical devices create synergic systems leading to unprecedented efficiency. The theoretical results, practical solutions and guidelines presented are valuable for both researchers working in the area of engineering sciences and practitioners looking for solutions to industrial problems.

Download or read book Diagnosis and Fault tolerant Control Volume 2 written by Vicenc Puig and published by John Wiley & Sons. This book was released on 2021-11-30 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent advances in fault diagnosis and fault-tolerant control of dynamic processes. Its impetus derives from the need for an overview of the challenges of the fault diagnosis technique and sustainable control, especially for those demanding systems that require reliability, availability, maintainability, and safety to ensure efficient operations. Moreover, the need for a high degree of tolerance with respect to possible faults represents a further key point, primarily for complex systems, as modeling and control are inherently challenging, and maintenance is both expensive and safety-critical. Diagnosis and Fault-tolerant Control 2 also presents and compares different fault diagnosis and fault-tolerant schemes, using well established, innovative strategies for modeling the behavior of the dynamic process under investigation. An updated treatise of diagnosis and fault-tolerant control is addressed with the use of essential and advanced methods including signal-based, model-based and data-driven techniques. Another key feature is the application of these methods for dealing with robustness and reliability.