Download or read book Analysis and Deformulation of Polymeric Materials written by Jan W. Gooch and published by Springer Science & Business Media. This book was released on 2005-11-28 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical resource provides chemists, formulators, forensic scientists, teachers, and students with the latest information on the composition of polymeric materials. After a discussion of principles, chapters cover formulations, materials, and analysis of paint, plastic, and adhesives and describe reformulation methods to test analysis results. A detailed table of contents and extensive index with listings of relevant materials allows readers easy access to topics. Other features include various materials listed according to their trivial, trade, and scientific names cross-referenced for easy identification.
Download or read book Analysis and Deformulation of Polymeric Materials written by Jan Woodall Gooch and published by . This book was released on 2002 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Additives in Polymers written by Jan C. J. Bart and published by John Wiley & Sons. This book was released on 2005-04-08 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt: This industrially relevant resource covers all established and emerging analytical methods for the deformulation of polymeric materials, with emphasis on the non-polymeric components. Each technique is evaluated on its technical and industrial merits. Emphasis is on understanding (principles and characteristics) and industrial applicability. Extensively illustrated throughout with over 200 figures, 400 tables, and 3,000 references.
Download or read book Analysis of Thermoset Materials Precursors and Products written by Martin J. Forrest and published by iSmithers Rapra Publishing. This book was released on 2003 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents an overview of the chemical analysis of thermosets. Materials based on thermosets present the analyst with considerable challenges due to their complexity and the wide range of polymer types and additives available. This review sets out to present an introduction to the analytical techniques and methods that are used to characterise and carry out quality control work on thermosets, investigate the failure of thermosets products and to deformulate thermoset compounds. The review is accompanied by around 400 abstracts from papers and books in the Rapra Polymer Library database, to facilitate further reading on this subject.
Download or read book Characterization and Failure Analysis of Plastics written by ASM International and published by ASM International. This book was released on 2003-01-01 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: The selection and application of engineered materials is an integrated process that requires an understanding of the interaction between materials properties, manufacturing characteristics, design considerations, and the total life cycle of the product. This reference book on engineering plastics provides practical and comprehensive coverage on how the performance of plastics is characterized during design, property testing, and failure analysis. The fundamental structure and properties of plastics are reviewed for general reference, and detailed articles describe the important design factors, properties, and failure mechanisms of plastics. The effects of composition, processing, and structure are detailed in articles on the physical, chemical, thermal, and mechanical properties. Other articles cover failure mechanisms such as: crazing and fracture; impact loading; fatigue failure; wear failures, moisture related failure; organic chemical related failure; photolytic degradation; and microbial degradation. Characterization of plastics in failure analysis is described with additional articles on analysis of structure, surface analysis, and fractography.
Download or read book Biocompatible Polymeric Materials and Tourniquets for Wounds written by Jan W. Gooch and published by Springer Science & Business Media. This book was released on 2010-07-24 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years biocompatible polymers for injuries and wounds have seen advances and innovations that have outpaced the growing field's literature. In this book Dr. Jan W. Gooch, a National Research Council Research Associateship Award recipient, reveals how innovative polymer technology can be applied to the common combat and trauma wounds associated with damaged soft tissue and bleeding. The scope of his investigation spans four distinct devices for wounds, liquid and particulate barrier dressings for soft tissue wounds, sutureless tissue adhesives, antibacterial nanoemulsions, one-hand operated and automatic tourniquets for the battlefield.
Download or read book Polymer Additive Analytics written by Jan C. J. Bart and published by Firenze University Press. This book was released on 2006 with total page 393 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Encyclopedic Dictionary of Polymers written by Jan W. Gooch and published by Springer Science & Business Media. This book was released on 2010-11-08 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference, in its second edition, contains more than 7,500 polymeric material terms, including the names of chemicals, processes, formulae, and analytical methods that are used frequently in the polymer and engineering fields. In view of the evolving partnership between physical and life sciences, this title includes an appendix of biochemical and microbiological terms (thus offering previously unpublished material, distinct from all competitors.) Each succinct entry offers a broadly accessible definition as well as cross-references to related terms. Where appropriate to enhance clarity further, the volume's definitions may also offer equations, chemical structures, and other figures. The new interactive software facilitates easy access to a large database of chemical structures (2D/3D-view), audio files for pronunciation, polymer science equations and many more.
Download or read book Recycling of Polyethylene Terephthalate Bottles written by Sabu Thomas and published by William Andrew. This book was released on 2018-10-29 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recycling of Polyethylene Terephthalate Bottles provides an overview of PET chemistry, highlighting the main degradation, depolymerization processes and pathways of PET, along with the applications of recycled monomers derived from PET waste. The latest methodologies of recycling and feedstock recovery are covered, providing critical foundational information. In addition, the book discusses a range of established methods of polymer recycling, with an emphasis on real world industrial case studies and the latest academic research. Users will find in-depth lifecycle and cost analysis of each waste management method, comparing the suitability and feasibility of each to support the decision -making process. Polyethylene Terephthalate (PET) is the most recycled plastic in the world, but still represents a significant amount of landfill waste. This book presents an update on new regulations, providing recommendations for new opportunities in this area, including new processing methods and applications for recycled PET. Features a comprehensive introduction to the waste management of PET bottles, from regulatory concerns, to the range of different methods of materials recovery Enables practitioners to choose the most efficient and effective waste management process Includes detailed lifecycle and cost analysis information Compares traditional thermal recycling methods with more recently developed monomer recovery and chemical recycling methods
Download or read book Plastics Additives written by J.C.J. Bart and published by IOS Press. This book was released on 2006-03-15 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Cover-to-cover reading of Plastics Additives, Advanced Industrial Analysis, is recommended for both professional analysts and plastics technologists. Professor Bart’s prose style is easy to read. A professional background in analytical chemistry is not assumed. Particularly valuable is the trove of good advice as to which approach might be best in a given situation. Every department with a serious interest in additive / property relations should invest in a copy.” -- PMAD Newsletter. This industrially relevant and up-to-date resource deals with all established and emerging analytical methods for in-polymer additive analysis of plastics formulations. Quality assurance and industrial troubleshooting all benefit from direct analysis modes. Plastics Additives comprises detailed coverage of solid-state spectroscopy, thermal analysis and pyrolysis, laser techniques, surface studies and microanalysis along with process analytics, quantitative analysis and modern method development and validation applied to additives in polymers. The book is organised for quick and easy reference and is extensively illustrated with over 200 figures, 300 flow diagrams and tables to facilitate rapid understanding of this topic, and it contains 4000 references. Emphasis is on understanding (principles and characteristics) and industrial applicability.
Download or read book Polymer Characterization written by Dan Campbell and published by CRC Press. This book was released on 2000-09-28 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discerning the properties of polymers and polymer-based materials requires a good understanding of characterization. This revised and updated text provides a comprehensive survey of characterization methods within its simple, concise chapters. Polymer Characterization: Physical Techniques, provides an overview of a wide variety of characterization methods, which makes it an excellent textbook and reference. It starts with a description of basic polymer science, providing a solid foundation from which to understand the key physical characterization techniques. The authors explain physical principles without heavy theory and give special emphasis to the application of the techniques to polymers, with plenty of illustrations. Topics covered include molecular weight determination, molecular and structural characterization by spectroscopic techniques, morphology and structural characterization by microscopy and diffraction, and thermal analysis. This edition contains a new chapter on surface analysis as well as some revised problems and solutions. The concise treatment of each topic offers even those with little prior knowledge of the subject an accessible source to relevant, simple descriptions in a well-organized format.
Download or read book Multicomponent Polymeric Materials written by G. E. Zaikov and published by Apple Academic Press. This book was released on 2021-03-31 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Through a balanced combination of theory and experiments, this book provides a detailed overview of the main and most up-to-date advances in the area of polymeric materials. Because the subject is essentially interdisciplinary and brings together scientists and engineers with different educational backgrounds, the book offers a research-oriented exposition of the fundamentals as well. The book is based on the editors' and authors' extensive experience in research, development, and education in the field of materials science, and especially polymer testing, polymer diagnostics, and failure analysis. A comprehensive coverage of the methods of polymer testing is provided along with the results of the authors' work on deformation and fracture behavior of polymers. This book will be useful to faculty as well as advanced-level students in materials science, materials technology, plastic technology, mechanical engineering, process engineering, and chemical engineering.
Download or read book Colloids in Biotechnology written by Monzer Fanun and published by CRC Press. This book was released on 2010-09-17 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Colloids show great potential in a wide variety of applications, including drug delivery and medical imaging, and the design and fabrication of colloid systems has attracted considerable interest in the research community. Colloids in Biotechnology describes developments in the field of biotechnological applications in the past decade and bridges t
Download or read book Deformation and Flow of Polymeric Materials written by Helmut Münstedt and published by Springer. This book was released on 2014-11-18 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the properties of single polymer molecules and polymeric materials and the methods how to characterize them. Molar masses, molar mass distributions and branching structure are discussed in detail. These properties are decisive for a deeper understanding of structure/properties relationships of polymeric materials. This book therefore describes and discusses them in detail. The mechanical behavior as a function of time and temperature is a key subject of the book. The authors present it on the basis of many original results they have obtained in their long research careers. They present the temperature dependence of mechanical properties of various polymeric materials in a wide temperature range: from cryogenic temperatures to the melt. Besides an extensive data collection on the transitions of various different polymeric materials, they also carefully present the physical explanations of the observed phenomena. Glass transition and melting temperatures are discussed, particularly, with their relevance for applications. A comprehensive part of the book deals with properties of polymers in the molten state and their decisive influence on the processing of the materials. The book presents and discusses viscous and elastic properties in detail as a function of molar mass, polydispersity, and branching. This book addresses students of polymer and materials science, as well as other natural sciences. Besides this educational value, it will also serve as a valuable monograph for everyone dealing with polymers and polymeric materials, from research, over development, to applications.
Download or read book Organic Photochromic and Thermochromic Compounds written by John C. Crano and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 491 pages. Available in PDF, EPUB and Kindle. Book excerpt: This major treatise on photochromism involving organic molecules and derived systems is a result of increased international interest in the field. Volume 1 offers a detailed examination of the synthesis and specific photochromic properties of the best-known photochromic and thermochromic compounds. It includes numerous physico-chemical methods by which photochromic substances can be studied as well as practical information and commercial applications for known photochromic families.
Download or read book Compositional and Failure Analysis of Polymers written by John Scheirs and published by John Wiley & Sons. This book was released on 2000-10-03 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ein Praxisleitfaden der Polymeranalyse für alle, die sich in Polymerlabors mit Analytik, Qualitätskontrolle oder Produktentwicklung beschäftigen. Der Autor erläutert, aus seinem umfangreichen Erfahrungsschatz, welche Probleme in welchen Situationen auftreten können. Viele Fallstudien helfen bei der Anwendung der Erkenntnisse im Laboralltag. Mit einer umfangreichen Datensammlung zu physikalischen Eigenschaften von Polymeren! (07/00)
Download or read book Leachables and Extractables Handbook written by Douglas J. Ball and published by John Wiley & Sons. This book was released on 2012-02-08 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical and science-based approach for addressing toxicological concerns related to leachables and extractables associated with inhalation drug products Packaging and device components of Orally Inhaled and Nasal Drug Products (OINDP) such as metered dose inhalers, dry powder inhalers, and nasal sprays pose potential safety risks from leachables and extractables, chemicals that can be released or migrate from these components into the drug product. Addressing the concepts, background, historical use, and development of safety thresholds and their utility for qualifying leachables and extractables in OINDP, the Leachables and Extractables Handbook takes a practical approach to familiarize readers with the recent recommendations for safety and risk assessment established through a joint effort of scientists from the FDA, academia, and industry. Coverage includes best practices for the chemical evaluation and management of leachables and extractables throughout the pharmaceutical product life cycle, as well as: Guidance for pharmaceutical professionals to qualify and risk-assess container closure system leachables and extractables in drug products Principles for defining toxicological safety thresholds that are applicable to OINDP and potentially applicable to other drug products Regulatory perspectives, along with an appendix of key terms and definitions, case studies, and sample protocols Analytical chemists, packaging and device engineers, formulation development scientists, component suppliers, regulatory affairs specialists, and toxicologists will all benefit from the wealth of information offered in this important text.
