Download or read book Analog Simulation Time Reduction Based on Variable Tolerance Relaxation written by Vinayak Kumar and published by . This book was released on 2006 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt: Circuit simulation, arguably the most used tool amongst the tools required for very large circuit design, provides the means to validate electrical circuits and also to perform behavioral analysis. As the size and the complexity of circuits are growing exponentially, simulation of the circuits is taking enormous amount of processing time. As a result, simulation time is becoming a major bottleneck in performance. The purpose of this research work is to implement an algorithm to reduce simulation time of circuits under certain constraints. The algorithm is called the Analog Simulation Time Reduction using Variable Tolerance Relaxation (VTR) and can be particularly useful to a circuit designer who aspires to achieve desired simulation accuracy of only a part of a large analog circuit (rather than the entire). The main purpose of this algorithm is to maintain the desired accuracies of the variables, either node voltages or branch currents, in this small part of the circuit, while reducing the simulation time of the circuit. To achieve this objective, the algorithm uses a tolerance relaxation technique applied to all variables not of interest of designer while assuring the accuracy of all variables in interest to the designer. Variable- sensitivity analysis is automatically performed to determine the relaxed tolerances for uninteresting variables while maintaining desired accuracies of variables of interest. The VTR algorithm is executed during the initial stage of the simulation so that rest of the simulation can be done with relaxed tolerances of the variables. In this study, circuits were restricted to passive and linear-active circuits only. The experiment results showed maximum simulation time improvements of twenty-five percent over a broad range of passive and linear active circuits ranging in size from 23 to 91 elements. In no case did simulation time increase.
Download or read book Analog Design and Simulation Using OrCAD Capture and PSpice written by Dennis Fitzpatrick and published by Elsevier. This book was released on 2011-11-16 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Anyone involved in circuit design that needs the practical know-how it takes to design a successful circuit or product, will find this practical guide to using Capture-PSpice (written by a former Cadence PSpice expert for Europe) an essential book. The text delivers step-by-step guidance on using Capture-PSpice to help professionals produce reliable, effective designs. Readers will learn how to get up and running quickly and efficiently with industry standard software and in sufficient detail to enable building upon personal experience to avoid common errors and pit-falls. This book is of great benefit to professional electronics design engineers, advanced amateur electronics designers, electronic engineering students and academic staff looking for a book with a real-world design outlook. Provides both a comprehensive user guide, and a detailed overview of simulation Each chapter has worked and ready to try sample designs and provides a wide range of to-do exercises Core skills are developed using a running case study circuit Covers Capture and PSpice together for the first time.
Download or read book Mixed Mode Simulation and Analog Multilevel Simulation written by Resve A. Saleh and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mixed-Mode Simulation and Analog Multilevel Simulation addresses the problems of simulating entire mixed analog/digital systems in the time-domain. A complete hierarchy of modeling and simulation methods for analog and digital circuits is described. Mixed-Mode Simulation and Analog Multilevel Simulation also provides a chronology of the research in the field of mixed-mode simulation and analog multilevel simulation over the last ten to fifteen years. In addition, it provides enough information to the reader so that a prototype mixed-mode simulator could be developed using the algorithms in this book. Mixed-Mode Simulation and Analog Multilevel Simulation can also be used as documentation for the SPLICE family of mixed-mode programs as they are based on the algorithms and techniques described in this book.
Download or read book Computer Aided Design of Analog Integrated Circuits and Systems written by Rob A. Rutenbar and published by John Wiley & Sons. This book was released on 2002-05-06 with total page 773 pages. Available in PDF, EPUB and Kindle. Book excerpt: The tools and techniques you need to break the analog design bottleneck! Ten years ago, analog seemed to be a dead-end technology. Today, System-on-Chip (SoC) designs are increasingly mixed-signal designs. With the advent of application-specific integrated circuits (ASIC) technologies that can integrate both analog and digital functions on a single chip, analog has become more crucial than ever to the design process. Today, designers are moving beyond hand-crafted, one-transistor-at-a-time methods. They are using new circuit and physical synthesis tools to design practical analog circuits; new modeling and analysis tools to allow rapid exploration of system level alternatives; and new simulation tools to provide accurate answers for analog circuit behaviors and interactions that were considered impossible to handle only a few years ago. To give circuit designers and CAD professionals a better understanding of the history and the current state of the art in the field, this volume collects in one place the essential set of analog CAD papers that form the foundation of today's new analog design automation tools. Areas covered are: * Analog synthesis * Symbolic analysis * Analog layout * Analog modeling and analysis * Specialized analog simulation * Circuit centering and yield optimization * Circuit testing Computer-Aided Design of Analog Integrated Circuits and Systems is the cutting-edge reference that will be an invaluable resource for every semiconductor circuit designer and CAD professional who hopes to break the analog design bottleneck.
Download or read book Hybrid Simulation written by Victor Saouma and published by CRC Press. This book was released on 2014-04-21 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid Simulation deals with a rapidly evolving technology combining computer simulation (typically finite element) and physical laboratory testing of two complementary substructures. It is a cost effective alternative to shaking table test, and allows for the improved understanding of complex coupled systems. Traditionally, numerical simulation an
Download or read book Musculoskeletal Disorders and the Workplace written by Institute of Medicine and published by National Academies Press. This book was released on 2001-05-24 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Every year workers' low-back, hand, and arm problems lead to time away from jobs and reduce the nation's economic productivity. The connection of these problems to workplace activities-from carrying boxes to lifting patients to pounding computer keyboards-is the subject of major disagreements among workers, employers, advocacy groups, and researchers. Musculoskeletal Disorders and the Workplace examines the scientific basis for connecting musculoskeletal disorders with the workplace, considering people, job tasks, and work environments. A multidisciplinary panel draws conclusions about the likelihood of causal links and the effectiveness of various intervention strategies. The panel also offers recommendations for what actions can be considered on the basis of current information and for closing information gaps. This book presents the latest information on the prevalence, incidence, and costs of musculoskeletal disorders and identifies factors that influence injury reporting. It reviews the broad scope of evidence: epidemiological studies of physical and psychosocial variables, basic biology, biomechanics, and physical and behavioral responses to stress. Given the magnitude of the problem-approximately 1 million people miss some work each year-and the current trends in workplace practices, this volume will be a must for advocates for workplace health, policy makers, employers, employees, medical professionals, engineers, lawyers, and labor officials.
Download or read book Mathematics of Large Eddy Simulation of Turbulent Flows written by Luigi Carlo Berselli and published by Springer Science & Business Media. This book was released on 2006 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: The LES-method is rapidly developing in many practical applications in engineering The mathematical background is presented here for the first time in book form by one of the leaders in the field
Download or read book A Guide to Simulation written by P. Bratley and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simulation means driving a model of a system with suitable inputs and observing the corresponding outputs. It is widely applied in engineering, in business, and in the physical and social sciences. Simulation method ology araws on computer. science, statistics, and operations research and is now sufficiently developed and coherent to be called a discipline in its own right. A course in simulation is an essential part of any operations re search or computer science program. A large fraction of applied work in these fields involves simulation; the techniques of simulation, as tools, are as fundamental as those of linear programming or compiler construction, for example. Simulation sometimes appears deceptively easy, but perusal of this book will reveal unexpected depths. Many simulation studies are statistically defective and many simulation programs are inefficient. We hope that our book will help to remedy this situation. It is intended to teach how to simulate effectively. A simulation project has three crucial components, each of which must always be tackled: (1) data gathering, model building, and validation; (2) statistical design and estimation; (3) programming and implementation. Generation of random numbers (Chapters 5 and 6) pervades simulation, but unlike the three components above, random number generators need not be constructed from scratch for each project. Usually random number packages are available. That is one reason why the chapters on random numbers, which contain mainly reference material, follow the ch!lPters deal ing with experimental design and output analysis.
Download or read book Op Amps for Everyone written by Ron Mancini and published by Newnes. This book was released on 2003 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: The operational amplifier ("op amp") is the most versatile and widely used type of analog IC, used in audio and voltage amplifiers, signal conditioners, signal converters, oscillators, and analog computing systems. Almost every electronic device uses at least one op amp. This book is Texas Instruments' complete professional-level tutorial and reference to operational amplifier theory and applications. Among the topics covered are basic op amp physics (including reviews of current and voltage division, Thevenin's theorem, and transistor models), idealized op amp operation and configuration, feedback theory and methods, single and dual supply operation, understanding op amp parameters, minimizing noise in op amp circuits, and practical applications such as instrumentation amplifiers, signal conditioning, oscillators, active filters, load and level conversions, and analog computing. There is also extensive coverage of circuit construction techniques, including circuit board design, grounding, input and output isolation, using decoupling capacitors, and frequency characteristics of passive components. The material in this book is applicable to all op amp ICs from all manufacturers, not just TI. Unlike textbook treatments of op amp theory that tend to focus on idealized op amp models and configuration, this title uses idealized models only when necessary to explain op amp theory. The bulk of this book is on real-world op amps and their applications; considerations such as thermal effects, circuit noise, circuit buffering, selection of appropriate op amps for a given application, and unexpected effects in passive components are all discussed in detail. *Published in conjunction with Texas Instruments *A single volume, professional-level guide to op amp theory and applications *Covers circuit board layout techniques for manufacturing op amp circuits.
Download or read book Science Abstracts written by and published by . This book was released on 1995 with total page 1360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multiphysics Simulation by Design for Electrical Machines Power Electronics and Drives written by Marius Rosu and published by John Wiley & Sons. This book was released on 2017-12-18 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents applied theory and advanced simulation techniques for electric machines and drives This book combines the knowledge of experts from both academia and the software industry to present theories of multiphysics simulation by design for electrical machines, power electronics, and drives. The comprehensive design approach described within supports new applications required by technologies sustaining high drive efficiency. The highlighted framework considers the electric machine at the heart of the entire electric drive. The book also emphasizes the simulation by design concept—a concept that frames the entire highlighted design methodology, which is described and illustrated by various advanced simulation technologies. Multiphysics Simulation by Design for Electrical Machines, Power Electronics and Drives begins with the basics of electrical machine design and manufacturing tolerances. It also discusses fundamental aspects of the state of the art design process and includes examples from industrial practice. It explains FEM-based analysis techniques for electrical machine design—providing details on how it can be employed in ANSYS Maxwell software. In addition, the book covers advanced magnetic material modeling capabilities employed in numerical computation; thermal analysis; automated optimization for electric machines; and power electronics and drive systems. This valuable resource: Delivers the multi-physics know-how based on practical electric machine design methodologies Provides an extensive overview of electric machine design optimization and its integration with power electronics and drives Incorporates case studies from industrial practice and research and development projects Multiphysics Simulation by Design for Electrical Machines, Power Electronics and Drives is an incredibly helpful book for design engineers, application and system engineers, and technical professionals. It will also benefit graduate engineering students with a strong interest in electric machines and drives.
Download or read book A Survey of Relaxations and Approximations of the Power Flow Equations written by Daniel K. Molzahn and published by . This book was released on 2019-02-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The techniques described in this monograph form the basis of running an optimally efficient modern day power system. It is a must-read for all students and researchers working on the cutting edge of electric power systems.
Download or read book Pll Performance Simulation and Design written by Dean Banerjee and published by Dog Ear Publishing. This book was released on 2006-08 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for the reader who wishes to gain a solid understanding of Phase Locked Loop architectures and their applications. It provides a unique balance between both theoretical perspectives and practical design trade-offs. Engineers faced with real world design problems will find this book to be a valuable reference providing example implementations, the underlying equations that describe synthesizer behavior, and measured results that will improve confidence that the equations are a reliable predictor of system behavior. New material in the Fourth Edition includes partially integrated loop filter implementations, voltage controlled oscillators, and modulation using the PLL.
Download or read book Power System Dynamics and Stability written by Peter W. Sauer and published by . This book was released on 1998 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a one-semester senior or beginning graduate level course in power system dynamics. This text begins with the fundamental laws for basic devices and systems in a mathematical modeling context. It includes systematic derivations of standard synchronous machine models with their fundamental controls. These individual models are interconnected for system analysis and simulation. Singular perturbation is used to derive and explain reduced-order models.
Download or read book Distributed Optimization and Statistical Learning Via the Alternating Direction Method of Multipliers written by Stephen Boyd and published by Now Publishers Inc. This book was released on 2011 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surveys the theory and history of the alternating direction method of multipliers, and discusses its applications to a wide variety of statistical and machine learning problems of recent interest, including the lasso, sparse logistic regression, basis pursuit, covariance selection, support vector machines, and many others.
Download or read book CMOS written by R. Jacob Baker and published by John Wiley & Sons. This book was released on 2008 with total page 1074 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition provides an important contemporary view of a wide range of analog/digital circuit blocks, the BSIM model, data converter architectures, and more. The authors develop design techniques for both long- and short-channel CMOS technologies and then compare the two.
Download or read book Rainfall Runoff Modelling written by Keith J. Beven and published by John Wiley & Sons. This book was released on 2012-01-30 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rainfall-Runoff Modelling: The Primer, Second Edition is the follow-up of this popular and authoritative text, first published in 2001. The book provides both a primer for the novice and detailed descriptions of techniques for more advanced practitioners, covering rainfall-runoff models and their practical applications. This new edition extends these aims to include additional chapters dealing with prediction in ungauged basins, predicting residence time distributions, predicting the impacts of change and the next generation of hydrological models. Giving a comprehensive summary of available techniques based on established practices and recent research the book offers a thorough and accessible overview of the area. Rainfall-Runoff Modelling: The Primer Second Edition focuses on predicting hydrographs using models based on data and on representations of hydrological process. Dealing with the history of the development of rainfall-runoff models, uncertainty in mode predictions, good and bad practice and ending with a look at how to predict future catchment hydrological responses this book provides an essential underpinning of rainfall-runoff modelling topics. Fully revised and updated version of this highly popular text Suitable for both novices in the area and for more advanced users and developers Written by a leading expert in the field Guide to internet sources for rainfall-runoff modelling software
