Download or read book Analog Integrated Circuits written by Miklós Herpy and published by . This book was released on 1980 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analog Integrated Circuits written by Miklós Herpy and published by John Wiley & Sons. This book was released on 1980 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design With Operational Amplifiers And Analog Integrated Circuits written by Sergio Franco and published by McGraw-Hill Higher Education. This book was released on 2014-01-31 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: Franco's "Design with Operational Amplifiers and Analog Integrated Circuits, 4e" combines theory with real-life applications to deliver a straightforward look at analog design principles and techniques. An emphasis on the physical picture helps the student develop the intuition and practical insight that are the keys to making sound design decisions.is The book is intended for a design-oriented course in applications with operational amplifiers and analog ICs. It also serves as a comprehensive reference for practicing engineers. This new edition includes enhanced pedagogy (additional problems, more in-depth coverage of negative feedback, more effective layout), updated technology (current-feedback and folded-cascode amplifiers, and low-voltage amplifiers), and increased topical coverage (current-feedback amplifiers, switching regulators and phase-locked loops).
Download or read book Analog Integrated Circuit Applications written by J. Michael Jacob and published by . This book was released on 2000 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book takes full advantage of the latest advances in analog integrated circuits, computer-aided design, electronic publishing, and the World Wide Web's implications for publication support and distribution.Coverage opens with an introduction to the operational amplifier integrated circuit, then presents chapters on amplifiers and feedback; digital control of analog functions; power supplies and ic regulators; operational amplifier characteristics; layout and fabrication of analog circuits; single supply amplifiers; waveform generators; active filters; and nonlinear circuits.For practicing analog integrated circuit designers and anyone interested in applications and design with analog integrated circuits.
Download or read book Analog Integrated Circuits Anal g Integr lt ramk r k Operational Amplifiers and Analog Multipliers written by Miklós Herpy and published by . This book was released on 1980 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Integrated Circuits for Analog Signal Processing written by Esteban Tlelo-Cuautle and published by Springer Science & Business Media. This book was released on 2012-07-27 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents theory, design methods and novel applications for integrated circuits for analog signal processing. The discussion covers a wide variety of active devices, active elements and amplifiers, working in voltage mode, current mode and mixed mode. This includes voltage operational amplifiers, current operational amplifiers, operational transconductance amplifiers, operational transresistance amplifiers, current conveyors, current differencing transconductance amplifiers, etc. Design methods and challenges posed by nanometer technology are discussed and applications described, including signal amplification, filtering, data acquisition systems such as neural recording, sensor conditioning such as biomedical implants, actuator conditioning, noise generators, oscillators, mixers, etc. Presents analysis and synthesis methods to generate all circuit topologies from which the designer can select the best one for the desired application; Includes design guidelines for active devices/elements with low voltage and low power constraints; Offers guidelines for selecting the right active devices/elements in the design of linear and nonlinear circuits; Discusses optimization of the active devices/elements for process and manufacturing issues of nanometer technology.
Download or read book Analog Circuit Design written by Johan Huijsing and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many interesting design trends are shown by the six papers on operational amplifiers (Op Amps). Firstly. there is the line of stand-alone Op Amps using a bipolar IC technology which combines high-frequency and high voltage. This line is represented in papers by Bill Gross and Derek Bowers. Bill Gross shows an improved high-frequency compensation technique of a high quality three stage Op Amp. Derek Bowers improves the gain and frequency behaviour of the stages of a two-stage Op Amp. Both papers also present trends in current-mode feedback Op Amps. Low-voltage bipolar Op Amp design is presented by leroen Fonderie. He shows how multipath nested Miller compensation can be applied to turn rail-to-rail input and output stages into high quality low-voltage Op Amps. Two papers on CMOS Op Amps by Michael Steyaert and Klaas Bult show how high speed and high gain VLSI building blocks can be realised. Without departing from a single-stage OT A structure with a folded cascode output, a thorough high frequency design technique and a gain-boosting technique contributed to the high-speed and the high-gain achieved with these Op Amps. . Finally. Rinaldo Castello shows us how to provide output power with CMOS buffer amplifiers. The combination of class A and AB stages in a multipath nested Miller structure provides the required linearity and bandwidth.
Download or read book Analysis and Design of Analog Integrated Circuits written by Paul R. Gray and published by John Wiley & Sons. This book was released on 2024-02-21 with total page 981 pages. Available in PDF, EPUB and Kindle. Book excerpt: ANALYSIS AND DESIGN OF ANALOG INTEGRATED CIRCUITS Authoritative and comprehensive textbook on the fundamentals of analog integrated circuits, with learning aids included throughout Written in an accessible style to ensure complex content can be appreciated by both students and professionals, this Sixth Edition of Analysis and Design of Analog Integrated Circuits is a highly comprehensive textbook on analog design, offering in-depth coverage of the fundamentals of circuits in a single volume. To aid in reader comprehension and retention, supplementary material includes end of chapter problems, plus a Solution Manual for instructors. In addition to the well-established concepts, this Sixth Edition introduces a new super-source follower circuit and its large-signal behavior, frequency response, stability, and noise properties. New material also introduces replica biasing, describes and analyzes two op amps with replica biasing, and provides coverage of weighted zero-value time constants as a method to estimate the location of dominant zeros, pole-zero doublets (including their effect on settling time and three examples of circuits that create doublets), the effect of feedback on pole-zero doublets, and MOS transistor noise performance (including a thorough treatment on thermally induced gate noise). Providing complete coverage of the subject, Analysis and Design of Analog Integrated Circuits serves as a valuable reference for readers from many different types of backgrounds, including senior undergraduates and first-year graduate students in electrical and computer engineering, along with analog integrated-circuit designers.
Download or read book Design of Analog Multipliers with Operational Amplifiers written by K.C. Selvam and published by CRC Press. This book was released on 2019-07-12 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design of analog multipliers discusses what an analog multiplier and its related types is, how different types of analog multipliers are implemented with analog two to one multiplexers and op-amps, and how the types of analog multipliers are implemented with transistors and op-amps. Describing forty-eight analog multiplier circuits, book explains six building blocks as integrator, comparator, switch, low pass filter, peak detector and sample & hold circuit. All analog multiplier circuits presented in this book use a maximum of four operational amplifiers which will enable the readers to simulate the multipliers with minimum number of components and use for their application at low cost.
Download or read book Operational Amplifiers Linear Integrated Circuits written by Robert F. Coughlin and published by Pearson Educación. This book was released on 1998 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: "In this fifth edition, we not only have kept the standard 741 op amp but also have shown many circuits with newer, readily available op amps because these have largely overcome the dc and ac limitations of the older types. We preserved or objective of simplifying the process of learning about applications involving signal conditioning, signal generation, filters, instrumentation, and control circuits. But we have oriented this fifth edition to reflect the evolution of analog circuits into those applications whose purpose is to condition signals from transducers or other sources into form suitable for presentation to a microcontroller or computer. In addition, we have added examples of circuit simulation using PSpice throughout this edition."--Introduction.
Download or read book Analog Integrated Circuits written by Edwin W. Greeneich and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog Integrated Circuits deals with the design and analysis of modem analog circuits using integrated bipolar and field-effect transistor technologies. This book is suitable as a text for a one-semester course for senior level or first-year graduate students as well as a reference work for practicing engin eers. Advanced students will also find the text useful in that some of the material presented here is not covered in many first courses on analog circuits. Included in this is an extensive coverage of feedback amplifiers, current-mode circuits, and translinear circuits. Suitable background would be fundamental courses in electronic circuits and semiconductor devices. This book contains numerous examples, many of which include commercial analog circuits. End-of-chapter problems are given, many illustrating practical circuits. Chapter 1 discuses the models commonly used to represent devices used in modem analog integrated circuits. Presented are models for bipolar junction transistors, junction diodes, junction field-effect transistors, and metal-oxide semiconductor field-effect transistors. Both large-signal and small-signal models are developed as well as their implementation in the SPICE circuit simulation program. The basic building blocks used in a large variety of analog circuits are analyzed in Chapter 2; these consist of current sources, dc level-shift stages, single-transistor gain stages, two-transistor gain stages, and output stages. Both bipolar and field-effect transistor implementations are presented. Chapter 3 deals with operational amplifier circuits. The four basic op-amp circuits are analyzed: (1) voltage-feedback amplifiers, (2) current-feedback amplifiers, (3) current-differencing amplifiers, and (4) transconductance ampli fiers. Selected applications are also presented.
Download or read book Analog Integrated Circuits written by Alan B. Grebene and published by IEEE Computer Society Press. This book was released on 1978 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design With Operational Amplif written by Franco and published by Tata McGraw-Hill Education. This book was released on 2002-11 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analog Function Circuits written by K. C. Selvam and published by CRC Press. This book was released on 2021-12-07 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook comprehensively presents different types of analog function circuits and outlines the function circuit types implemented with lowpass filters, peak detectors, and sample and hold circuits. The text analyzes the complete architecture of a function circuit, identifies the applications of op-amps for performing a function circuit, and explores new ways of deriving function circuits using a sawtooth wave generator and a triangular wave generator. It covers important topics including waveform generators, analog dividers, time division multipliers-cum-dividers (MCDs), peak responding MCDs, vector magnitude circuits, multifunction converters, and phase sensitive detector circuits. The textbook will serve as an ideal study material for senior undergraduate and graduate students in the fields of electrical, electronics, and communications engineering. The textbook is accompanied by teaching resources, including a solutions manual for instructors.
Download or read book Analysis and Design of Analog Integrated Circuits written by Paul R. Gray and published by John Wiley & Sons. This book was released on 2009-01-20 with total page 896 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the only comprehensive book in the market for engineers that covers the design of CMOS and bipolar analog integrated circuits. The fifth edition retains its completeness and updates the coverage of bipolar and CMOS circuits. A thorough analysis of a new low-voltage bipolar operational amplifier has been added to Chapters 6, 7, 9, and 11. Chapter 12 has been updated to include a fully differential folded cascode operational amplifier example. With its streamlined and up-to-date coverage, more engineers will turn to this resource to explore key concepts in the field.
Download or read book Analog Circuit Design written by Willy Sansen and published by Springer Science & Business Media. This book was released on 1996-10-31 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the revised contributions of all the speakers of the fifth AACD Workshop which was held in Lausanne on April 2-4, 1996. It was organized by Dr Vlado Valence of the EPFL University and MEAD of Lausanne. The program consisted of six tutorials per day during three days. The tutorials were presented by experts in the field. They were selected by a program committee consisting of Prof. Willy Sansen of the Katholieke Universiteit Leuven, Prof. Rudy van de Plassche of Philips Research and the University of Technology Eindhoven and Prof. 10han Huijsing of the Delft University of Technology. The three topics mentioned above have been selected because of their importance in present days analog design. The other topics that have been discussed before are: in 1992 : Operational amplifiers Analog to digital convereters Analog computer aided design in 1993 : Mixed AID cicuit design Sensor interface circuits Communication circuits in 1994 : Low-power low-voltage design Integrated filters Smart power circuits in 1995 : Low-noise, low-power, low-voltage design Mixed-mode design with CAD tools Voltage, current and time references Each AACD workhop has given rise to the publication of a book by Kluwer entitled "Analog Circuit Design". This is thus the fifth book. This series of books provides a valuable overview of all analog circuit design techniques and achievements. It is a reference for whoever is engaged in this discipline.
Download or read book Op amps and Linear Integrated Circuits written by Ramakant A. Gayakwad and published by Pearson. This book was released on 2000 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: This accurate and easy-to-understand book presents readers with the basic principles of operational amplifiers and integrated circuits--with a very practical approach.. A large number of examples, questions, problems, and practical circuit applications make it a valuable reference guide. Chapter topics include an introduction to, frequency response and negative feedback of op-amps--along with interpretation of data sheets and characteristics. Also covered are active filters and oscillators, comparators and converters, specialized IC applications and system projects. .For professional design engineers, technologists, and technicians, with self-study interests, who need the ability to adapt to changing technology as new devices appear on the market.
