Download or read book Analog Design and Simulation Using OrCAD Capture and PSpice written by Dennis Fitzpatrick and published by Elsevier. This book was released on 2011-11-16 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Anyone involved in circuit design that needs the practical know-how it takes to design a successful circuit or product, will find this practical guide to using Capture-PSpice (written by a former Cadence PSpice expert for Europe) an essential book. The text delivers step-by-step guidance on using Capture-PSpice to help professionals produce reliable, effective designs. Readers will learn how to get up and running quickly and efficiently with industry standard software and in sufficient detail to enable building upon personal experience to avoid common errors and pit-falls. This book is of great benefit to professional electronics design engineers, advanced amateur electronics designers, electronic engineering students and academic staff looking for a book with a real-world design outlook. Provides both a comprehensive user guide, and a detailed overview of simulation Each chapter has worked and ready to try sample designs and provides a wide range of to-do exercises Core skills are developed using a running case study circuit Covers Capture and PSpice together for the first time.

Download or read book Analog Design and Simulation using OrCAD Capture and PSpice written by Dennis Fitzpatrick and published by Elsevier. This book was released on 2011-09-28 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analog Design and Simulation using OrCAD Capture and PSpice provides step-by-step instructions on how to use the Cadence/OrCAD family of Electronic Design Automation software for analog design and simulation. Organized into 22 chapters, each with exercises at the end, it explains how to start Capture and set up the project type and libraries for PSpice simulation. It also covers the use of AC analysis to calculate the frequency and phase response of a circuit and DC analysis to calculate the circuits bias point over a range of values. The book describes a parametric sweep, which involves sweeping a parameter through a range of values, along with the use of Stimulus Editor to define transient analog and digital sources. It also examines the failure of simulations due to circuit errors and missing or incorrect parameters, and discusses the use of Monte Carlo analysis to estimate the response of a circuit when device model parameters are randomly varied between specified tolerance limits according to a specified statistical distribution. Other chapters focus on the use of worst-case analysis to identify the most critical components that will affect circuit performance, how to add and create PSpice models, and how the frequency-related signal and dispersion losses of transmission lines affect the signal integrity of high-speed signals via the transmission lines. Practitioners, researchers, and those interested in using the Cadence/OrCAD professional simulation software to design and analyze electronic circuits will find the information, methods, compounds, and experiments described in this book extremely useful. Provides both a comprehensive user guide, and a detailed overview of simulation Each chapter has worked and ready to try sample designs and provides a wide range of to-do exercises Core skills are developed using a running case study circuit Covers Capture and PSpice together for the first time

Download or read book Complete PCB Design Using OrCAD Capture and PCB Editor written by Kraig Mitzner and published by Newnes. This book was released on 2009-05-28 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides instruction on how to use the OrCAD design suite to design and manufacture printed circuit boards. The primary goal is to show the reader how to design a PCB using OrCAD Capture and OrCAD Editor. Capture is used to build the schematic diagram of the circuit, and Editor is used to design the circuit board so that it can be manufactured. The book is written for both students and practicing engineers who need in-depth instruction on how to use the software, and who need background knowledge of the PCB design process. Beginning to end coverage of the printed circuit board design process. Information is presented in the exact order a circuit and PCB are designed Over 400 full color illustrations, including extensive use of screen shots from the software, allow readers to learn features of the product in the most realistic manner possible Straightforward, realistic examples present the how and why the designs work, providing a comprehensive toolset for understanding the OrCAD software Introduces and follows IEEE, IPC, and JEDEC industry standards for PCB design. Unique chapter on Design for Manufacture covers padstack and footprint design, and component placement, for the design of manufacturable PCB's FREE CD containing the OrCAD demo version and design files

Download or read book Complete PCB Design Using OrCad Capture and Layout written by Kraig Mitzner and published by Elsevier. This book was released on 2011-04-01 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complete PCB Design Using OrCad Capture and Layout provides instruction on how to use the OrCAD design suite to design and manufacture printed circuit boards. The book is written for both students and practicing engineers who need a quick tutorial on how to use the software and who need in-depth knowledge of the capabilities and limitations of the software package. There are two goals the book aims to reach: The primary goal is to show the reader how to design a PCB using OrCAD Capture and OrCAD Layout. Capture is used to build the schematic diagram of the circuit, and Layout is used to design the circuit board so that it can be manufactured. The secondary goal is to show the reader how to add PSpice simulation capabilities to the design, and how to develop custom schematic parts, footprints and PSpice models. Often times separate designs are produced for documentation, simulation and board fabrication. This book shows how to perform all three functions from the same schematic design. This approach saves time and money and ensures continuity between the design and the manufactured product. Information is presented in the exact order a circuit and PCB are designed Straightforward, realistic examples present the how and why the designs work, providing a comprehensive toolset for understanding the OrCAD software Introduction to the IPC, JEDEC, and IEEE standards relating to PCB design Full-color interior and extensive illustrations allow readers to learn features of the product in the most realistic manner possible

Download or read book Analog Design and Simulation Using OrCAD Capture and PSpice written by Dennis Fitzpatrick and published by Newnes. This book was released on 2017-12-11 with total page 454 pages. Available in PDF, EPUB and Kindle. Book excerpt: New to this edition: Updated to using OrCAD Release 17.2 and its new features; Coverage of PSPICE extra features: PSpice Designer, PSpice Designer Plus, Modelling Application, PSpice Part Search Symbol Viewer, PSpice Report, Associate PSpice model, New delay functions for Behavioural Simulation Models, New Models, Support for negative values in hysteresis voltage and threshold voltage; A new chapter on PSpice Advanced Analysis Analog Design and Simulation Using OrCAD Capture and PSpice, Second Edition provides step-by-step instructions on how to use the Cadence/OrCAD family of Electronic Design Automation software for analog design and simulation. The book explains how to enter schematics in Capture, set up project types, project libraries and prepare circuits for PSpice simulation. There are chapters on the different analysis types for DC Bias point, DC sweep, AC frequency sweep, Parametric analysis, Temperature analysis, Performance Analysis, Noise analysis, Sensitivity and Monte Carlo simulation. Subsequent chapters explain how the Stimulus Editor is used to define custom analog and digital signals, how the Model Editor is used to view and create new PSpice models and Capture parts and how the Magnetic Parts Editor is used to design transformers and inductors. Other chapters include Analog Behaviorial models, Test Benches as well as how to create hierarchical designs. The book includes the latest features in the OrCAD 17.2 release and there are exercises with step by step instructions at the end of each chapter that enables the reader to progress based upon their experience and knowledge gained from previous chapters. The author worked for Cadence for over eight years and supported and delivered OrCAD PSpice training courses all over Europe. This book has been endorsed by Cadence. In addition, there are new chapters on the PSpice Advanced Analysis suite of tools: Sensitivity Analysis, Optimizer, Monte Carlo, and Smoke Analysis.The chapters show how circuit performance can effectively be maximised and optimised for variations in component tolerances, temperature effects, manufacturing yields and component stress. Provides both a comprehensive user guide and a detailed overview of simulation using OrCAD Capture and PSpice Includes worked and ready to try sample designs and a wide range of to-do exercises Covers Capture and PSpice together

Download or read book PSPICE and MATLAB for Electronics written by John Okyere Attia and published by CRC Press. This book was released on 2010-06-23 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Used collectively, PSPICE and MATLAB are unsurpassed for circuit modeling and data analysis. PSPICE can perform DC, AC, transient, Fourier, temperature, and Monte Carlo analysis of electronic circuits with device models and subsystem subcircuits. MATLAB can then carry out calculations of device parameters, curve fitting, numerical integration, nume

Download or read book PSpice for Digital Communications Engineering written by Paul Tobin and published by Springer Nature. This book was released on 2022-06-01 with total page 199 pages. Available in PDF, EPUB and Kindle. Book excerpt: PSpice for Digital Communications Engineering shows how to simulate digital communication systems and modulation methods using the very powerful Cadence Orcad PSpice version 10.5 suite of software programs. Fourier series and Fourier transform are applied to signals to set the ground work for the modulation techniques introduced in later chapters. Various baseband signals, including duo-binary baseband signaling, are generated and the spectra are examined to detail the unsuitability of these signals for accessing the public switched network. Pulse code modulation and time-division multiplexing circuits are examined and simulated where sampling and quantization noise topics are discussed. We construct a single-channel PCM system from transmission to receiver i.e. end-to-end, and import real speech signals to examine the problems associated with aliasing, sample and hold. Companding is addressed here and we look at the A and mu law characteristics for achieving better signal to quantization noise ratios. Several types of delta modulators are examined and also the concept of time divisionmultiplexing is considered. Multi-level signaling techniques such as QPSK andQAMare analyzed and simulated and 'home-made meters', such as scatter and eye meters, are used to assess the performance of these modulation systems in the presence of noise. The raised-cosine family of filters for shaping data before transmission is examined in depth where bandwidth efficiency and channel capacity is discussed. We plot several graphs in Probe to compare the efficiency of these systems. Direct spread spectrum is the last topic to be examined and simulated to show the advantages of spreading the signal over a wide bandwidth and giving good signal security at the same time.

Download or read book PSpice for Circuit Theory and Electronic Devices written by Paul Tobin and published by Springer Nature. This book was released on 2022-05-31 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: PSpice for Circuit Theory and Electronic Devices is one of a series of five PSpice books and introduces the latest Cadence Orcad PSpice version 10.5 by simulating a range of DC and AC exercises. It is aimed primarily at those wishing to get up to speed with this version but will be of use to high school students, undergraduate students, and of course, lecturers. Circuit theorems are applied to a range of circuits and the calculations by hand after analysis are then compared to the simulated results. The Laplace transform and the s-plane are used to analyze CR and LR circuits where transient signals are involved. Here, the Probe output graphs demonstrate what a great learning tool PSpice is by providing the reader with a visual verification of any theoretical calculations. Series and parallel-tuned resonant circuits are investigated where the difficult concepts of dynamic impedance and selectivity are best understood by sweeping different circuit parameters through a range of values. Obtaining semiconductor device characteristics as a laboratory exercise has fallen out of favour of late, but nevertheless, is still a useful exercise for understanding or modelling semiconductor devices. Inverting and non-inverting operational amplifiers characteristics such as gain-bandwidth are investigated and we will see the dependency of bandwidth on the gain using the performance analysis facility. Power amplifiers are examined where PSpice/Probe demonstrates very nicely the problems of cross-over distortion and other problems associated with power transistors. We examine power supplies and the problems of regulation, ground bounce, and power factor correction. Lastly, we look at MOSFET device characteristics and show how these devices are used to form basic CMOS logic gates such as NAND and NOR gates.

Download or read book CMOS written by R. Jacob Baker and published by John Wiley & Sons. This book was released on 2008 with total page 1074 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition provides an important contemporary view of a wide range of analog/digital circuit blocks, the BSIM model, data converter architectures, and more. The authors develop design techniques for both long- and short-channel CMOS technologies and then compare the two.

Download or read book Modelling Photovoltaic Systems Using PSpice written by Luis Castañer and published by John Wiley & Sons. This book was released on 2003-03-07 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photovoltaics, the direct conversion of light from the sun into electricity, is an increasingly important means of distributed power generation. The SPICE modelling tool is typically used in the development of electrical and electronic circuits. When applied to the modelling of PV systems it provides a means of understanding and evaluating the performance of solar cells and systems. The majority of books currently on the market are based around discussion of the solar cell as semiconductor devices rather than as a system to be modelled and applied to real-world problems. Castaner and Silvestre provide a comprehensive treatment of PV system technology analysis. Using SPICE, the tool of choice for circuits and electronics designers, this book highlights the increasing importance of modelling techniques in the quantitative analysis of PV systems. This unique treatment presents both students and professional engineers, with the means to understand, evaluate and develop their own PV modules and systems. * Provides a unique, self-contained, guide to the modelling and design of PV systems * Presents a practical, application oriented approach to PV technology, something that is missing from the current literature * Uses the widely known SPICE circuit-modelling tool to analyse and simulate the performance of PV modules for the first time * Written by respected and well-known academics in the field

Download or read book Electronic Circuits with MATLAB PSpice and Smith Chart written by Won Y. Yang and published by John Wiley & Sons. This book was released on 2020-01-15 with total page 882 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides practical examples of circuit design and analysis using PSpice, MATLAB, and the Smith Chart This book presents the three technologies used to deal with electronic circuits: MATLAB, PSpice, and Smith chart. It gives students, researchers, and practicing engineers the necessary design and modelling tools for validating electronic design concepts involving bipolar junction transistors (BJTs), field-effect transistors (FET), OP Amp circuits, and analog filters. Electronic Circuits with MATLAB®, PSpice®, and Smith Chart presents analytical solutions with the results of MATLAB analysis and PSpice simulation. This gives the reader information about the state of the art and confidence in the legitimacy of the solution, as long as the solutions obtained by using the two software tools agree with each other. For representative examples of impedance matching and filter design, the solution using MATLAB and Smith chart (Smith V4.1) are presented for comparison and crosscheck. This approach is expected to give the reader confidence in, and a deeper understanding of, the solution. In addition, this text: Increases the reader's understanding of the underlying processes and related equations for the design and analysis of circuits Provides a stepping stone to RF (radio frequency) circuit design by demonstrating how MATLAB can be used for the design and implementation of microstrip filters Features two chapters dedicated to the application of Smith charts and two-port network theory Electronic Circuits with MATLAB®, PSpice®, and Smith Chart will be of great benefit to practicing engineers and graduate students interested in circuit theory and RF circuits.

Download or read book An Introduction to Logic Circuit Testing written by Parag K. Lala and published by Springer Nature. This book was released on 2022-06-01 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Logic Circuit Testing provides a detailed coverage of techniques for test generation and testable design of digital electronic circuits/systems. The material covered in the book should be sufficient for a course, or part of a course, in digital circuit testing for senior-level undergraduate and first-year graduate students in Electrical Engineering and Computer Science. The book will also be a valuable resource for engineers working in the industry. This book has four chapters. Chapter 1 deals with various types of faults that may occur in very large scale integration (VLSI)-based digital circuits. Chapter 2 introduces the major concepts of all test generation techniques such as redundancy, fault coverage, sensitization, and backtracking. Chapter 3 introduces the key concepts of testability, followed by some ad hoc design-for-testability rules that can be used to enhance testability of combinational circuits. Chapter 4 deals with test generation and response evaluation techniques used in BIST (built-in self-test) schemes for VLSI chips. Table of Contents: Introduction / Fault Detection in Logic Circuits / Design for Testability / Built-in Self-Test / References

Download or read book Circuit Analysis with PSpice written by Nassir H. Sabah and published by CRC Press. This book was released on 2017-04-21 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric circuits, and their electronic circuit extensions, are found in all electrical and electronic equipment; including: household equipment, lighting, heating, air conditioning, control systems in both homes and commercial buildings, computers, consumer electronics, and means of transportation, such as cars, buses, trains, ships, and airplanes. Electric circuit analysis is essential for designing all these systems. Electric circuit analysis is a foundation for all hardware courses taken by students in electrical engineering and allied fields, such as electronics, computer hardware, communications and control systems, and electric power. This book is intended to help students master basic electric circuit analysis, as an essential component of their professional education. Furthermore, the objective of this book is to approach circuit analysis by developing a sound understanding of fundamentals and a problem-solving methodology that encourages critical thinking.

Download or read book Electronic Experiences in a Virtual Lab written by Roberto Gastaldi and published by Springer Nature. This book was released on 2020-05-11 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a collection of “lessons” on various topics commonly encountered in electronic circuit design, including some basic circuits and some complex electronic circuits, which it uses as vehicles to explain the basic circuits they are composed of. The circuits considered include a linear amplifier, oscillators, counters, a digital clock, power supplies, a heartbeat detector, a sound equalizer, an audio power amplifier and a radio. The theoretical analysis has been deliberately kept to a minimum, in order to dedicate more time to a “learning by doing” approach, which, after a brief review of the theory, readers are encouraged to use directly with a simulator tool to examine the operation of circuits in a “virtual laboratory.” Though the book is not a theory textbook, readers should be familiar with the basic principles of electronic design, and with spice-like simulation tools. To help with the latter aspect, one chapter is dedicated to the basic functions and commands of the OrCad P-spice simulator used for the experiments described in the book.

Download or read book Circuit Systems with MATLAB and PSpice written by Won Y. Yang and published by Won Y. Yang. This book was released on 2012-03-02 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1. Instead of the conventional method using the general/particular solutions to solve differential equations for the circuits containing inductors/capacitors, this book lays emphasis on the Laplace transform method for solving differential equations. We recommend taking the Laplace transform of electric circuits (containing inductors/capacitors) and setting up the transformed circuit equations directly in the unified framework (as if they were just made of resistors and sources) rather than setting up the circuit equations in the form of differential equations and then taking their Laplace transforms to solve them. The Laplace transform and the inverse Laplace transform are introduced in the Appendix. 2. This book presents several MATLAB programs that can be used to get the Laplace transformed solutions, take their inverse Laplace transforms, and plot the solutions along the time or frequency axis. The MATLAB programs can save a lot of time and effort for obtaining the solutions in the time domain or frequency domain so that readers can concentrate on establishing circuit equations, gaining insights to the problems, and making observations/interpretations of the solutions. 3. This book also introduces step by step how to use OrCAD/PSpice for circuit simulations. For circuit problems taking much time to solve by hand, the readers are recommended to use MATLAB and PSpice. This approach gives the readers not only information about the state of the art, but also self-confidence on the condition that the graphical solutions obtained by using the two software tools agree with each other. The OrCAD/PSpice is introduced in the Appendix. However, the portion of MATLAB and PSpice is kept not large lest the readers should be addicted to just using the software and tempted to neglect the importance of the basic circuit theory. 4. We make each example show something different from other examples so that readers can efficiently acquire the essential circuit analysis techniques and gain insights into the various types of circuits. On the other hand, instead of repeating similar exercise problems, we make most exercise problems arouse readers’ interest in practical application or help form a view for circuit application and design. 5. For representative examples, the analytical solutions are presented together with the results of MATLAB analysis (close to the theory) and PSpice simulation (close to the experiment) in the form of trinity. We are sure that this style of presentation will interest many students, attracting their attention to the topics on circuits efficiently. 6. Unlike most circuit books with a similar title, our book deals with positive-feedback op-amp circuits as well as negative-feedback op-amp circuits.

Download or read book Complete PCB Design Using OrCAD Capture and PCB Editor written by Kraig Mitzner and published by Academic Press. This book was released on 2019-06-20 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complete PCB Design Using OrCAD Capture and PCB Editor, Second Edition, provides practical instruction on how to use the OrCAD design suite to design and manufacture printed circuit boards. Chapters cover how to Design a PCB using OrCAD Capture and OrCAD Layout, adding PSpice simulation capabilities to a design, how to develop custom schematic parts, how to create footprints and PSpice models, and how to perform documentation, simulation and board fabrication from the same schematic design. This book is suitable for both beginners and experienced designers, providing basic principles and the program's full capabilities for optimizing designs. Presents a fully updated edition on OrCAD Capture, Version 17.2 Combines the theoretical and practical parts of PCB design Includes real-life design examples that show how and why designs work, providing a comprehensive toolset for understanding OrCAD software Provides the exact order in which a circuit and PCB are designed Introduces the IPC, JEDEC and IEEE standards relating to PCB design

Download or read book Circuit Stimulation and Analysis written by Moslehpour Saeid and published by American Relay Radio League Incorporated.. This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: