Download or read book Anaerobic digestion in the kraft pulp and paper industry written by Eva-Maria Ekstrand and published by Linköping University Electronic Press. This book was released on 2019-05-07 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt: The pulp and paper industry is a large producer of wastewater and sludge, putting high pressure on waste treatment. In addition, more rigorous environmental legislation for pollution control and demands to increase the use of renewable energy have put further pressure on the pulp and paper industry’s waste treatment, where anaerobic digestion (AD) and the production of methane could pose a solution. Kraft pulping makes up 80% of the world production of virgin wood pulp, thus, the wastewaters from this sector represent a large unused potential for methane production. There are three main types of substrates available for AD at pulp and paper mills, the wastewaters, the primary sludge/fibre sludge, and the waste activated sludge. AD treatment of these streams has been associated with several challenges, such as the presence of inhibiting compounds or low degradability during AD. The aim of this thesis was to experimentally address these challenges and potentials, focusing on wastes from kraft mills. Methane potential batch tests showed that many wastewater streams still posed challenges to AD, but the alkaline elemental chlorine-free bleaching stream and the condensate effluents had good methane potentials. Further, the methane potential of kraft mill fibre sludge was high, and co-digestion of kraft mill fibre sludge and waste activated sludge was feasible in stirred tank reactors with sludge recirculation. By increasing the organic loading in a pilot-scale activated sludge facility and thereby lowering the sludge age, the degradability of the waste activated sludge was improved. The higher wastewater treatment capacity achieved by this method provides an opportunity for the mills to increase their pulp and paper production. Further, by dewatering the digestate after AD and returning the liquid to the activated sludge treatment, costs for nutrient supplementation can be reduced. In conclusion, the thesis shows that AD of wastes from the kraft pulp and paper industry was feasible and carried many benefits regarding the generation of methane as a renewable energy carrier, improved wastewater treatment and reduced costs. Different strategies on how AD may be implemented in the kraft pulp and paper industry were formulated and discussed. Produktionen av pappers- och massa genererar stora mängder avloppsvatten, vilket ställer höga krav på en effektiv vattenrening. Därtill har skärpta regler för utsläpp till vatten och luft tillsammans med en ökad efterfrågan på användning av förnyelsebar energi ytterligare ökat trycket på vattenreningen inom pappers-och massaindustrin, där anaerob nedbrytning med metanproduktion som följd skulle kunna utgöra en lösning. Produktionen av sulfatmassa (en kemiskt kokad pappersmassa) utgör 80% av den globala nyproduktionen av massa, vilket innebär att avloppsvatten från denna sektor representerar en stor outnyttjad potential för metanproduktion. Det finns huvudsakligen tre typer av substrat tillgängliga för rötning vid pappers- och massabruk, avloppsvatten, primärslam/fiberslam, och aktivt slam/överskottsslam. Flera utmaningar är kopplade till anaerob nedbrytning av dess strömmar, såsom förekomst av inhiberande ämnen eller låg nedbrytbarhet. Målet med avhandlingen var att bemöta dessa utmaningar, med ett särskilt fokus på behandling av avloppsströmmar från sulfatbruk. Metanpotentialtester visade att många av avloppsvattnen fortfarande var svåra att behandla med anaerob nedbrytning, men att alkaliska blekeriströmmar och kondensatströmmar vid sulfatbruk visade lovande metanpotentialer. Massafiber från sulfatoch sulfitbruk uppvisade höga metanpotentialer, och en stabil kontinuerlig samrötning av fiberslam och aktivt slam från sulfatbruk uppnåddes vid hög organisk belastning och låg hydraulisk uppehållstid i omrörda tankreaktorer med slamåterföring. Resultaten visade vidare att den låga nedbrytbarheten hos aktivt slam kunde bemötas genom att sänka slamåldern i den luftade anläggningen, med högre metanpotential i slammet som följd. Via denna metodik erhålles en högre vattenreningskapacitet, vilket innebär att bruken kan öka sin produktion av papper och massa. Dessutom kan rötresten avvattnas och den kvarvarande vätskan återföras till den luftade anläggningen för att minska behovet av näringstillsatser. Sammanfattningsvis visar avhandlingen att anaerob nedbrytning av avloppsströmmar från sulfatbruk var fullt möjlig och innebar många fördelar, i form av metanproduktion, förbättrad kapacitet för vattenrening och reducerade kostnader jämfört med dagens teknik. Olika möjligheter för implementering av anaerob teknik vid sulfatbruk har också formulerats och diskuterats.

Download or read book Anaerobic Technology in Pulp and Paper Industry written by Pratima Bajpai and published by Springer. This book was released on 2017-03-14 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a state-of-the-art report on the treatment of pulp and paper industry effluents using anaerobic technology. It covers a comprehensive range of topics, including the basic reasons for anaerobic treatment, comparison between anaerobic and aerobic treatment, effluent types suitable for anaerobic treatment, design considerations for anaerobic treatment, anaerobic reactor configurations applied for treatment of pulp and paper industry effluents, present status of anaerobic treatment in pulp and paper industry, economic aspects, examples of full scale installations and future trends.

Download or read book Pulp and Paper Industry written by Pratima Bajpai and published by Elsevier. This book was released on 2017-02-25 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pulp and Paper Industry: Emerging Waste Water Treatment Technologies is the first book which comprehensively reviews this topic. Over the past decade, pulp and paper companies have continued to focus on minimizing fresh water use and effluent discharges as part of their move towards sustainable operating practices. Three stages—basic conservation, water reuse and water recycling—provide a systematic approach to water resource management. Implementing these stages requires increased financial investment and better utilization of water resources. The ultimate goal for pulp and paper companies is to have effluent-free factories with no negative environmental impact. The traditional water treatment technologies that are used in paper mills are not able to remove recalcitrant contaminants. Therefore, advanced water treatment technologies are being included in industrial wastewater treatment chains aiming to either improve water biodegradability or its final quality. This book discusses various measures being adopted by the pulp and paper industry to reduce water consumption and treatment techniques to treat wastewater to recover it for reuse. The book also examines the emerging technologies for treatment of effluents and presents examples of full-scale installations. Provides thorough and in-depth coverage of advanced treatment technologies which will benefit the industry personnel, pulp manufacturers, researchers and advanced students Presents new treatment strategies to improve water reuse and fulfill the legislation in force regarding wastewater discharge Presents viable solutions for pulp and paper manufacturers in terms of wastewater treatment Presents examples of full-scale installations to help motivate mill personnel to incorporate new technologies

Download or read book Green Pulp and Paper Industry written by Amit Kumar and published by Walter de Gruyter GmbH & Co KG. This book was released on 2021-07-19 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides recent developments and future perspectives of pulp and paper processing based on biotechnology to replace conventional environmental unfriendly chemical processes. The use of microorganism and microbial enzymes in various processes such as bleaching, deinking, refining, dissolving pulp, debarking & pitch removal, slime control, wastewater treatment and waste material valorisation are discussed.

Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1991 with total page 962 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Selected Water Resources Abstracts written by and published by . This book was released on 1991 with total page 1422 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Anaerobic Treatment and Resource Recovery from Methanol Rich Waste Gases and Wastewaters written by Tejaswini Eregowda and published by CRC Press. This book was released on 2019-08-20 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methanol is an important volatile organic compound (VOC) present in the gaseous and liquid effluents of process industries such as pulp and paper, paint manufacturing and petroleum refineries. An estimated 65% of the total methanol emission was from the Kraft mills of the pulp and paper industries. The effect of selenate, sulfate and thiosulfate on methanol utilization for volatile fatty acids (VFA) production was individually examined in batch systems. Gas-phase methanol removal along with thiosulfate reduction was carried out for 123 d in an anoxic BTF. To examine the gas-phase methanol removal along with selenate reduction, another anoxic biotrickling filter (BTF) was operated for 89 d under step and continuous selenate feeding conditions. For the study on liquid-phase methanol, acetogenesis of foul condensate (FC) obtained from a chemical pulping industry was tested in three upflow anaerobic sludge blanket (UASB) reactors operated at 22, 37 and 55 oC for 51 d. The recovery of VFA was explored through adsorption studies using anion exchange resins in batch systems. The adsorption capacity of individual VFA on Amberlite IRA-67 and Dowex optipore L-493 was examined by fitting the experimental data to adsorption isotherms and kinetic models. A sequential batch process was tested to achieve selective separation of acetic acid from the VFA mixture.

Download or read book Nanotechnology in Paper and Wood Engineering written by Rajeev Bhat and published by Elsevier. This book was released on 2022-01-21 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnology in Paper and Wood Engineering: Fundamentals, Challenges and Applications describes recent advances made in the use of nanotechnology in the paper and pulp industry. Various types of nano-additives commonly used in the paper industry for modification of raw material to enhance final products are included, with other sections covering the imaging applications of nano-papers and nano-woods in pharmaceuticals, biocatalysis, photocatalysis and energy storage. This book is an important reference source for materials scientists and engineers who are looking to understand how nanotechnology is being used to create more efficient manufacturing processes in for the paper and wood industries. Provides information on nano-paper production and its applications Explains the major synthesis techniques and design concepts of cellulosic or wooden nanomaterials for industrial applications Assesses the major challenges of creating nanotechnology-based manufacturing systems for wood and paper engineering

Download or read book Energy Research and Development Projects in the Nordic Countries Directory 1988 written by and published by Nordic Council of Ministers. This book was released on with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the seventh directory of research, development and demonstration projects carried out within the field of energy, and of energy-related subjects, in the Nordic countries. The directory incorporates projects in progress during 1989. 2209 projects, most of which are financed by special public funds, are described. In addition to projects concerning energy sources, energy utilization and energy conservation, the directory also includes descriptions of research on environmental, ecological and socioeconomic issues, etc., where these are related to the main subject. The directory thus provides direct access to topical information relevant to a very comprehensive field of research. In the appendices the organization of the Nordic Energy Research Programme, and of energy research in each Nordic country, is explained, and the content and uses of the Nordic data base, Nordic Energy Index, are described. Names of people to contact, addresses, telephone numbers and other useful information, can also be found in addition to details about newsletters providing information on current research in some of the Nordic countries.

Download or read book Advanced Technologies for Water Quality Treatment and Management written by Mehraj U. Din Dar and published by CRC Press. This book was released on 2023-05-04 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new volume explores important recent approaches and advanced techniques for the effective management and treatment of wastewater. The book provides a range of diverse techniques for achieving optimum water quality management, for restoration of water bodies, for the improvement of a circular water economy, and for effective water reuse. Many of the new methods and technologies included in the book focus on sustainable phytoremediation techniques, such as the use of earthworms, ecological floating beds, and anaerobic biovalorization. The book also comprehensively discusses the scope of nanomaterials for wastewater treatment. Some of the least explored aspects of water quality improvement, such as use of eco-roofs, the role of remote sensing in water quality management, and biosand filters for household wastewater treatment, are discussed as well.

Download or read book Advanced Bioremediation Technologies and Processes for the Treatment of Synthetic Organic Compounds SOCs written by Datta Madamwar and published by Frontiers Media SA. This book was released on 2021-11-26 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dr. Datta Madamwar holds a provisional patent related to the theme of this Research Topic. All other Topic Editors declare no competing interests with regards to the Research Topic subject.

Download or read book Biovalorisation of Wastes to Renewable Chemicals and Biofuels written by Navanietha Krishnaraj Rathinam and published by Elsevier. This book was released on 2019-10-25 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biovalorisation of Wastes to Renewable Chemicals and Biofuels addresses advanced technologies for converting waste to biofuels and value-added products. Biovalorisation has several advantages over conventional bioremediation processes as it helps reduce the costs of bioprocesses. Examples are provided of several successfully commercialized technologies, giving insight into developing, potential processes for biovalorisation of different wastes. Different bioprocess strategies are discussed for valorising the wastes coming from the leather industry, olive oil industry, pulp and paper, winery, textile, and food industries, as well as aquaculture. A section on biorefinery for hydrocarbons and emerging contaminants is included to cover concepts on biodesulfurization of petroleum wastes, leaching of heavy metals from E – waste, and bioelectrochemical processes for CO2. Chapters on algal biorefinery are also included to focus on the technologies for conversion of CO2 sequestration and wastewater utilization. Biovalorisation of Wastes to Renewable Chemicals and Biofuels can be used as course material for graduate students in chemical engineering, chemistry, and biotechnology, and as a reference for industrial professionals and researchers who want to gain a basic understanding on the subject. Covers a wide range of topics, from the conversion of wastes to organic acids, biofuels, biopolymers and industrially relevant products Bridges the gap between academics and industry Written in a lucid and self-explanatory style Includes activities/quiz/critical questions

Download or read book Solar Energy Update written by and published by . This book was released on 1983-03 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Treatment of Industrial Effluents written by Mihir Kumar Purkait and published by CRC Press. This book was released on 2019-09-06 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: To address the issue of discharge of untreated industrial effluent in the water body causing pollution, adoption of cleaner production technologies and waste minimization initiatives are being encouraged. The book explains each related technology elaborately and critically analyses the same from practical application point of view. In-depth characterization, environmental and health effects and treatment of various industrial effluents are discussed with case studies. Limitations, challenges and remedial actions to be taken are included at the end of each chapter. Chapters are arranged as per specific type of effluents from various industries like textile, tannery/leather plant, and oil refinery.

Download or read book Biotechnology for Pulp and Paper Processing written by Pratima Bajpai and published by Springer Science & Business Media. This book was released on 2011-11-24 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the most up-to-date information available on various biotechnological processes useful in the pulp and paper industry. Each of the twenty chapters covers a specific biotechnological process or technique, discussing the advantages, limitations, and future prospects of the most important and popular processes used in the industry. Topics covered include tree improvement, pulping, bleaching, deinking, fiber modification, biosolids management, and biorefining.

Download or read book The Practical Handbook of Compost Engineering written by RogerTim Haug and published by Routledge. This book was released on 2018-05-04 with total page 745 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Practical Handbook of Compost Engineering presents an in-depth examination of the principles and practice of modern day composting. This comprehensive book covers compost science, engineering design, operation, principles, and practice, stressing a fundamental approach to analysis throughout. Biological, physical, chemical, thermodynamic, and kinetic principles are covered to develop a unified analytical approach to analysis and an understanding of the process. A brief history of the development of composting systems, which leads to descriptions of modern processes, is presented. The Practical Handbook of Compost Engineering also discusses the elements of successful odor management at composting facilities, including state-of-the-art odor treatment and enhanced atmospheric dispersion. The book is excellent for all engineers, practitioners, plant operators, scientists, researchers, and students in the field.

Download or read book Environmentally Friendly Technologies for the Pulp and Paper Industry written by Raymond A. Young and published by John Wiley & Sons. This book was released on 1997-11-19 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solving the pulp and paper industries' environmental problems is essential to maintaining the forest industry and accommodating the changing economic needs of forest communities. This book explores the construction of new mills--operating on new technology that does not produce pollutants--which are vital to the pulp and paper industry.