Download or read book An Ontological Approach to Design and Operate Innovation Networks written by Aglaya Batz Liñeiro and published by . This book was released on 2020-02-05 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work presents an ontological approach, representing the main entities and their interrelationships building the concept of innovation networks. In this sense, an ontological approach constitutes an "explicit specification of a conceptualization" based on what exists in a specific domain. Aligned with the recommendations of scholars studying the epistemology of ontologies the following sub-questions have been addressed: (1) how until now innovation networks have been approached by the academic community; (2) which elements are explaining innovation networks; (3) how the elements innovation networks are interrelated and; (4) which additional elements should be included to further advance the understanding of innovation networks. As a result of this research, it is proposed to leverage on the process of absorptive capacity to manage the performance of innovation networks. Finally, innovation networks established between 2007 and 2014 in Germany are analyzed and recommendations for policy makers and managers are discussed.

Download or read book Innovation in Manufacturing Networks written by Américo Azevedo and published by Springer. This book was released on 2008-05-25 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovation in Manufacturing Networks A fundamental concept of the emergent business, scientific and technological paradigms ces area, innovation the ability to apply new ideas to products, processes, organizational practices and business models - is crucial for the future competitiveness of organizations in a continually increasingly globalised, knowledge-intensive marketplace. Responsiveness, agility as well as the high performance of manufacturing systems is responsible for the recent changes in addition to the call for new approaches to achieve cost-effective responsiveness at all the levels of an enterprise. Moreover, creating appropriate frameworks for exploring the most effective synergies between human potential and automated systems represents an enormous challenge in terms of processes characterization, modelling, and the development of adequate support tools. The implementation and use of Automation Systems requires an ever increasing knowledge of enabling technologies and Business Practices. Moreover, the digital and networked world will surely trigger new business practices. In this context and in order to achieve the desired effective and efficiency performance levels, it is crucial to maintain a balance between both the technical aspects and the human and social aspects when developing and applying new innovations and innovative enabling technologies. BASYS conferences have been developed and organized so as to promote the development of balanced automation systems in an attempt to address the majority of the current open issues.

Download or read book Innovation and Ontologies written by Angelika Bullinger and published by Springer Science & Business Media. This book was released on 2008-12-11 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Angelika C. Bullinger elaborates, applies and tests a methodology for ontology development for use in business management. She models ontologically the moment of idea assessment and selection on a company-specific, industry-typical and generic level and presents action-oriented implications for implementation of the methodology in business reality.

Download or read book Networking and Information Technology Research and Development NITRD Program Supplement to the President s Budget for FY 2012 written by and published by DIANE Publishing. This book was released on with total page 49 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Leveraging Knowledge for Innovation in Collaborative Networks written by Luis M. Camarinha-Matos and published by Springer Science & Business Media. This book was released on 2009-09-21 with total page 821 pages. Available in PDF, EPUB and Kindle. Book excerpt: Collaborative Networks A Tool for Promoting Co-creation and Innovation The collaborative networks paradigm offers powerful socio-organizational mec- nisms, supported by advanced information and communication technologies for p- moting innovation. This, in turn, leads to new products and services, growth of better customer relationships, establishing better project and process management, and building higher-performing consortia. By putting diverse entities that bring different perspectives, competencies, practices, and cultures, to work together, collaborative networks develop the right environment for the emergence of new ideas and more efficient, yet practical, solutions. This aspect is particularly important for small and medium enterprises which typically lack critical mass and can greatly benefit from participation in co-innovation networks. However, larger organizations also benefit from the challenges and the diversity found in collaborative ecosystems. In terms of research, in addition to the trend identified in previous years toward a sounder consolidation of the theoretical foundation in this discipline, there is now a direction of developments more focused on modeling and reasoning about new c- laboration patterns and their contribution to value creation. “Soft issues,” including social capital, cultural aspects, ethics and value systems, trust, emotions, behavior, etc. continue to deserve particular attention in terms of modeling and reasoning. Exploi- tion of new application domains such as health care, education, and active aging for retired professionals also help identify new research challenges, both in terms of m- eling and ICT support development.

Download or read book Ontology Conceptualization and Epistemology for Information Systems Software Engineering and Service Science written by Miguel-Angel Sicilia and published by Springer Science & Business Media. This book was released on 2010-10-29 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the post-proceedings of the International Workshop on Ontology, Conceptualization and Epistemology for Information Systems, Software Engineering and Service Sciences (ONTOSE 2010) , held at the CAiSE 2010 conference in Hammamet, Tunisia, June, 2010. The 10 papers presented in this volume were carefully revised and selected from 25 submissions. They are grouped in sections on enterprise and service architectures, ontology applications, ontology visualization and query expansion, and ontologies for services.

Download or read book Innovations in Intelligent Machines 4 written by Colette Faucher and published by Springer. This book was released on 2013-11-18 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: This research volume is a continuation of our previous volumes on intelligent machine. It is divided into three parts. Part I deals with big data and ontologies. It includes examples related to the text mining, rule mining and ontology. Part II is on knowledge-based systems. It includes context-centered systems, knowledge discovery, interoperability, consistency and systems of systems. The final part is on applications. The applications involve prediction, decision optimization and assessment. This book is directed to the researchers who wish to explore the field of knowledge engineering further.

Download or read book Approaches and Processes for Managing the Economics of Information Systems written by Tsiakis, Theodosios and published by IGI Global. This book was released on 2014-01-31 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book explores the value of information and its management by highlighting theoretical and empirical approaches in the economics of information systems, providing insight into how information systems can generate economic value for businesses and consumers"--Provided by publisher.

Download or read book The Ontology of Design Research written by Miguel Ángel Herrera Batista and published by Routledge. This book was released on 2020-11-23 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book seeks to establish the meaning of design research, its role in the field, and the characteristics that differentiate research in design from research in other fields. The author introduces a model to explain the relationship between the components of the ontological reality of design: the designed object, the designer, and the user. Addressing design research across disciplines, the author establishes a foundational understanding of research, and research paradigms, for the design disciplines. This will be crucial for the emerging field of design research to find its own identity and move forward, building its own knowledge base as it finds its positioning between science and art. The book will be of interest to scholars working in design history, design studies, graphic design, industrial design, interior design, architecture, fashion design, and service design.

Download or read book Service Science and Knowledge Innovation written by Kecheng Liu and published by Springer. This book was released on 2014-04-28 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 15th IFIP WG 8.1 International Conference on Informatics and Semiotics in Organisations, ICISO 2014, held in Shanghai, China, in May 2014. The 39 revised papers presented at the main conference were carefully reviewed and selected from 88 submissions. Additionally, 10 papers were selected for presentation at two workshops held in the framework of ICISO 2014. The papers have been organized in the following topical sections: organizational semiotics: theory and concepts; organizational semiotics and applications; finance and service science; enterprise architecture; modelling and simulation and decision making and knowledge management. The last two sections contain papers from the Workshop on e-Health, the New Frontier of Service Science Innovation and the International Workshop on Information Engineering and Management.

Download or read book Engineering Applications of Neural Networks written by Chrisina Jayne and published by Springer. This book was released on 2013-04-19 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 13th International Conference on Engineering Applications of Neural Networks, EANN 2012, held in London, UK, in September 2012. The 49 revised full papers presented were carefully reviewed and selected from numerous submissions. The papers describe the applications of neural networks and other computational intelligence approaches to intelligent transport, environmental engineering, computer security, civil engineering, financial forecasting, virtual learning environments, language interpretation, bioinformatics and general engineering.

Download or read book Philosophical Frameworks and Design Processes written by Doctor Gjoko Muratovski and published by Intellect Books. This book was released on 2019-05-22 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Just as the term design has been going through change, growth and expansion of meaning, and interpretation in practice and education – the same can be said for design research. The traditional boundaries of design are dissolving and connections are being established with other fields at an exponential rate. Based on the proceedings from the IASDR 2017 Conference, Re:Research is an edited collection that showcases a curated selection of 83 papers – just over half of the works presented at the conference. With topics ranging from the introduction of design in the primary education sector to designing information for Artificial Intelligence systems, this book collection demonstrates the diverse perspectives of design and design research. Divided into seven thematic volumes, this collection maps out where the field of design research is now. Two Blind Spots in Design Thinking Estelle Berger From the 1980s, design thinking has emerged in companies as a method for practical and creative problem solving, based on designers’ way of thinking, integrated into a rational and iterative model to accompany the process. In companies, design thinking helped valuing creative teamwork, though not necessarily professional designers’ expertise. By pointing out two blind spots in design thinking models, as currently understood and implemented, this paper aims at shedding light on two rarely described traits of designers’ self. The first relies in problem framing, a breaking point that deeply escapes determinism. The second blind spot questions the post project process. We thus seek to portray designers’ singularity, in order to stimulate critical reflection and encourage the opening-up to design culture. Companies and organizations willing to make the most of designers’ expertise would gain acknowledging their critical heteronomy to foster innovation based on strong and disruptive visions, beyond an out-of-date problem-solving approach to design. Creating Different Modes of Existence: Toward an Ontological Ethics of Design Jamie Brassett This paper will address some design concerns relating to philosopher Étienne Souriau’s work Les différents modes d’existence (2009). This has important bearings upon design because, first, this philosophical attitude thinks of designing not as an act of forming objects with identity and meaning, but rather as a process of delivering things that allow for a multiplicity of creative remodulation of our very existences. Secondly, Souriau unpicks the concept of a being existing as a unified identity and redefines existence as a creative act of nonstop production of a variety of modes of existence. In doing this he not only moves ontological considerations to the fore of philosophical discussions away from epistemological ones, but does so in such a way as to align with attitudes to ethics that relate it to ontology – notably the work of Spinoza. (This places Souriau in a philosophical lineage that leads back, for example, to Nietzsche and Whitehead, and forward [from his era] to Deleuze and Guattari.) In thinking both ontology and ethics together, this paper will introduce a different approach to the ethics of design. Investigating Ideation Flexibility through Incremental to Radical Heuristics Ian Baker, Daniel Sevier, Seda McKilligan, Kathryn W. Jablokow, Shanna R. Daly, Eli M. Silk The concept of design thinking has received increasing attention during recent years, particularly from managers around the world. However, despite being the subject of a vast number of articles and books stating its importance, the effectiveness of this approach is unclear, as the claims about the concept are not grounded on empirical studies or evaluations. In this study, we investigated the perceptions of six design thinking methods of 21 managers in the agriculture industry as they explored employee- and business-related problems and solutions using these tools in a 6-hour workshop. The results from pre and post-survey responses suggest that the managers agreed on the value design thinking could bring to their own domains and were able to articulate on how they can use them in solving problems. We conclude by proposing directions for research to further explore adaptation of design thinking for the management practice context. Design Research and Innovation Model Using Layered Clusters of Displaced Prototypes - Juan de la Rosa, Stan Ruecker The ability of design to recognize the wicked problems inside complex systems and find possible ways to modify them, has led other disciplines to try to understand the design process and apply it to many areas of knowledge not traditionally associated with design. In additional, design’s creative solutions and ability to innovate have made designers a valuable resource in the contemporary economy. Nevertheless, there is still an unnecessarily constraining polemic about the meaning and model of the process of academic research in the field of design, the ways in which design research should be conducted and the specific knowledge that is produced with the design research process. This paper tries to broaden the discourse by describing the prototype as a basic element of the process of design, since it is connected to a specific type of knowledge and based on the working skills of the designer; it also proposes a model of the use of prototypes as a research tool based on four different theoretical concepts whose importance in the field of design has been strongly established by different academic communities around the world. These are embodied knowledge, displacement, complexity and that we learn about the world through transforming it. Pursuing these models, we develop a process to intentionally produce designerly knowledge of complex dynamic systems, using layered clusters of displaced prototypes. Solution-Generation Design Profiles: Reflection on “Reflection in Action” - Shoshi Bar-Eli Solution-generation design behavior in general, and “reflection-in-action” in particular, can serve to differentiate designers, recognizing their personal reflecting when designing. In psychology, reflection is found a more robust tool to enhance task performance after feedback from a personal “device” that generates the process itself while interacting with visual representation. Differences among students’ interior design processes appear in their solution-generation design behavior. A “think aloud” experiment identified solution generation behavior profiles. Qualitative and quantitative methodologies showed how design characteristics unite, forming patterns of design behavior. A comprehensive picture of designers’ differences emerged. The research aimed: to identify individual design students’ solution-generation profiles based on design characteristics; to show how reflection-in-action appearing in the profiles can serve to predict how novice designers learn and act when solving a design problem; to enhance the uniqueness of reflection-in-action for designers as distinct from reflection in other fields. Four distinct solution-generation profiles emerged, each showing a different type of reflective acts. Identifying reflection-in-action type can robustly predict how designers develop design solutions and help develop pedagogical concepts, strategies and tools. Let’s Get Divorced: Pragmatic and Critical Constructive Design Research Jodi Forlizzi, Ilpo Koskinen, Paul Hekkert, John Zimmerman Over the last two decades, constructive design research (CDR) –also known as Research through Design – has become an accepted mode of scholarly inquiry within the design research community. CDR is a broad term encompassing almost any kind of research that uses design action as a mode of inquiry. It has been described as having three distinct genres: lab, field and showroom. The lab and field genres typically take a pragmatic stance, making things as a way of investigating what preferred futures might be. In contrast, research done following the showroom approach (more commonly known as critical design [CD], speculative design or design fictions) offers a polemic and sometimes also a critique of the current state embodied in an artifact. Recently, we have observed a growing conflict within the design research community between pragmatic and critical researchers. To help reduce this conflict, we call for a divorce between CD and pragmatic CDR. We clarify how CDR and CD exist along a continuum. We conclude with suggestions for the design research community, about how each unique research approach can be used singly or in combination and how they can push the boundaries of academic design research in new collaboration with different disciplines. Critical and Speculative Design Practice and Semiotics: Meaning-Crafting for Futures Ready Brands - Malex Salamanques This article concerns the use of critical design practices within the context of commercial semiotics, arguing that incorporating practices from a critical design approach is valuable for client brands, but also an important means with which to incite brands to consider more deeply their role in shaping the future. As an alternative to the oppositional approach frequently taken by critical design practitioners, working through design practices collaboratively alongside client brands creates potential for the radical changes sought by many of the movement’s vanguard. A case study of recent work with a corporate client demonstrates the practical effects of using critical design practice within a commercial setting, proving the complementarity between critical design practice and commercial semiotics – where the confluence of the thinking brought new value to improve product design for example – and points to the value of using current leading edge thinking within the design community. Beyond Forecasting: A Design-Inspired Foresight Approach for Preferable Futures - Jorn Buhring, Ilpo Koskinen This paper engages with the literature to present different perspectives between forecasting and foresight in strategic design, while drawing insights derived from futures studies that can be applied in form of a design-inspired foresight approach for designers and interdisciplinary innovation teams increasingly called upon to help envisage preferable futures. Demonstrating this process in applied research, relevant examples are drawn from a 2016 Financial Services industry futures study to the year 2030. While the financial services industry exemplifies an ideal case for design-inspired foresight, the aims of this paper are primarily to establish the peculiarities between traditional forecasting applications and a design-inspired foresight visioning approach as strategic design activities for selecting preferable futures. Underlining the contribution of this paper is the value of design futures thinking as a creative and divergent thought process, which has the potential to respond to the much broader organizational reforms needed to sustain in today’s rapidly evolving business environment. Developing DIVE, a Design-Led Futures Technique for SMEs Ricardo Mejia Sarmiento, Gert Pasman, Erik Jan Hultink, Pieter Jan Stappers Futures techniques have long been used in large enterprises as designerly means to explore the future and guide innovation. In the automotive industry, for instance, the development of concept cars is a technique which has repeatedly proven its value. However, while big companies have broadly embraced futures techniques, small- and medium-sized enterprises (SMEs) have lagged behind in applying them, largely because they are too resource-intensive and poorly suited to the SMEs’ needs and idiosyncrasies. To address this issue, we developed DIVE: Design, Innovation, Vision, and Exploration, a design-led futures technique for SMEs. Its development began with an inquiry into concept cars in the automotive industry and concept products and services in other industries. We then combined the insights derived from these design practices with elements of the existing techniques of critical design and design fiction into the creation of DIVE’s preliminary first version, which was then applied and evaluated in two iterations with SMEs, resulting in DIVE’s alpha version. After both iterations in context, it seems that DIVE suits the SMEs because of its compact and inexpensive activities which emphasize making and storytelling. Although the results of these activities might be less flashy than concept cars, these simple prototypes and videos help SMEs internalize and share a clear image of a preferable future, commonly known as vision. Developing DIVE thus helped us explore how design can support SMEs in envisioning the future in the context of innovation. Mapping for Mindsets of Possibility During Home Downsizing Lisa Otto How can design orient people to an expanded sense of future possibility? Design researchers are beginning to recognize design’s potential role not solely in producing products, services and strategies but, instead, in shifting mindsets and behaviors. This shift requires a different view of the design practice, from engaging users to gather insights to be implemented, to that process as the actual material of the design. Borrowing from the framework of practice-oriented design, a first step in these processes is expanding participants’ understanding of future possibilities. In opening future possibilities, one recognizes an expanded range of futures and, ideally, engages in dialog with other people and their range of possibilities. This paper introduces mapping activities that are intended to reframe participants’ perception of possible futures. This study conducted pilot workshops with participants who were downsizing their home and struggling with decisions about their things and spaces. This paper argues that working with people already engaged in life transitions such as downsizing presents a rich opportunity for these futuring [sic] methods, as they are already beginning to grapple with designing for possible futures. These methods provide a stake in the ground for future exploration of potential methods to engender mindsets of possibility and engage in trialing methods like living labs. Storytelling Technique for Building Use-Case Scenarios for Design Development Sukwoo Jang, Ki-young Nam Numerous studies have dealt with what kind of value narrative can have for creating a more effective design process. However, there is lack of consideration of storytelling techniques on a stage-by-stage level, where each stage of storytelling technique can draw attention to detailed content for creating use-case scenarios for design development. This research aims to identify the potential implications for design development by using storytelling techniques. For the empirical research, two types of workshops were conducted in order to select the most appropriate storytelling technique for building use-case scenarios, and to determine the relationship between the two methods. Afterwards, co-occurrence analysis was conducted to examine how each step of storytelling technique can help designers develop an enriched content of use-case scenario. Subsequently, the major findings of this research are further discussed, dealing with how each of the storytelling technique steps can help designers to incorporate important issues when building use-case scenarios for design development. These issues are: alternative and competitor’s solution which can aid designers to create better design features; status quo bias of user which can help the designer investigate the occurring reason of the issue; and finally, social/political values of user which have the potential of guiding designers to create strengthened user experience. The results of this research help designers and design researchers concentrate on crucial factors such as the alternative or competitor’s solution, the status quo bias of user, and social/political values of the user when dealing with issues of building use-case scenarios. Group Storymaking: Understanding an Unfamiliar Target Group through Participatory Storytelling Hankyung Kim, Soonju Lee, Youn-kyung Lim Based on a sound research plan, qualitative user data help designers understand needs, behaviors and frustrations of a target user group. However, when a design team attempts to design for unfamiliar target groups, it is extremely difficult to accurately observe and understand them by simply using traditional research methods such as interviews and observation. As a result, the quality of user research data can be called into a question, which leads to unsatisfying design solutions. Inspired by a fiction writer’s technique of generating stories together with readers, we present the new method, Group Storymaking that supports designers to quickly gain broad and clear understanding of an unfamiliar target group throughout a story-making activity with actual users. We envision Group Storymaking as a new user study method that designers can easily implement to learn about an unfamiliar target, involving actual users in a research process with less time and cost commitment. Animation as a Creative Tool: Insights into the Complex Ian Balmain Hewitt, David A. Parkinson, Kevin H. Hilton A Design for Service (DfS) approach has been linked with impacts that significantly alter touchpoints, services and organizational culture. However, there is no model with which to assess the extent to which these impacts can be considered transformational. In the absence of such a model, the authors have reviewed literature on subjects including the transformational potential of design; characteristics of transformational design; transformational change; and organizational change. From this review, six indicators of transformational change in design projects have been identified: evidence of nontraditional transformative design objects; evidence of a new perspective; evidence of a community of advocates; evidence of design capability; evidence of new power dynamics; and evidence of new organizational standards. These indicators, along with an assessment scale, have been used to successfully review the findings from a doctoral study exploring the impact of the DfS approach in Voluntary Community Sector (VCS) organizations. This paper presents this model as a first-step to establishing a method to helpfully gauge the extent of transformational impact in design projects.

Download or read book Advances in Production Management Systems Competitive Manufacturing for Innovative Products and Services written by Christos Emmanouilidis and published by Springer. This book was released on 2013-08-13 with total page 780 pages. Available in PDF, EPUB and Kindle. Book excerpt: The two volumes IFIP AICT 397 and 398 constitute the thoroughly refereed post-conference proceedings of the International IFIP WG 5.7 Conference on Advances in Production Management Systems, APMS 2012, held in Rhodes, Greece, in September 2012. The 182 revised full papers were carefully reviewed and selected for inclusion in the two volumes. They are organized in 6 parts: sustainability; design, manufacturing and production management; human factors, learning and innovation; ICT and emerging technologies in production management; product and asset lifecycle management; and services, supply chains and operations.

Download or read book The SAGE Handbook of Human Machine Communication written by Andrea L. Guzman and published by SAGE. This book was released on 2023-06-01 with total page 1019 pages. Available in PDF, EPUB and Kindle. Book excerpt: The SAGE Handbook of Human-Machine Communication has been designed to serve as the touchstone text for researchers and scholars engaging in new research in this fast-developing field. Chapters provide a comprehensive grounding of the history, methods, debates and theories that contribute to the study of human-machine communication. Further to this, the Handbook provides a point of departure for theorizing interactions between people and technologies that are functioning in the role of communicators, and for considering the theoretical and methodological implications of machines performing traditionally ‘human’ roles. This makes the Handbook the first of its kind, and a valuable resource for students and scholars across areas such as communication, media and information studies, and computer science, as well as for practitioners, engineers and researchers interested in the foundational elements of this emerging field. Part 1: Histories and Trajectories Part 2: Approaches and Methods Part 3: Concepts and Contexts Part 4: Technologies and Applications

Download or read book Games and Play in HCI written by Kathrin Gerling and published by Frontiers Media SA. This book was released on 2021-08-03 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Organizational Innovation and Change written by Cecilia Rossignoli and published by Springer. This book was released on 2015-10-07 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores a range of critical issues and emerging topics relevant to the linkages between information technologies and organizational systems. It encourages debate and opens up new avenues of inquiry in the fields of Information Systems, organization and management studies by investigating selected themes of growing research interest from multiple disciplinary perspectives such as organizational innovation and impact, information technology, innovation transfer, and knowledge management. The volume is divided into two sections, each of which focuses on a specific theme: ICT, organizational innovation and change; and ICT and knowledge management. The content of each section is based on a selection of the best papers (original double-blind peer-reviewed contributions) presented at the annual conference of the Italian chapter of the AIS, held in Genoa, Italy in November 2014.

Download or read book Managerial Flow written by Veronica Vecchi and published by Routledge. This book was released on 2015-04-10 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: When globalization affects jobs and economies, policy makers strive to plan, design and implement actions to support their communities and businesses (Ansell and Gash 2007). Furthermore, local development policies are at the core of international cooperation programs or more in general represent a challenge for emerging countries. They could refer to infrastructure, entrepreneurship innovation or urban renewal. However, more frequently than not, development policies, which involve different institutional levels and public and private players, fail due to poor implementation management. This research book presents a managerial approach (the so called Managerial Flow) that could help the closure of gaps that hamper an efficient and effective policy execution. The managerial flow model observes the phenomenon of policy implementation for economic development through managerial lens. In the book, the research team has empirically identified five gaps in practice whereupon public policy implementation falls down. As a response Managerial Flow model outlines sets of managerial actions that can be adopted to facilitate a clear ‘flow’ from policy development through to implementation. This book expands on the Managerial Flow model, and acts as both a practical guide to stimulate evidence based policy implementation in governments and as theoretical contribution to policy and strategy execution. Written for researchers and academics, this book begins by outlining the theoretical foundations of Managerial Flow and moves to unpack application and cases, based in different sectors and countries, in order to discuss and show how the Managerial Flow approach can concretely support managers in the implementation of economic development policies. It reviews and discusses how the managerial flow could be relevant in the implementation of a set of sectorial policies and uses the managerial flow concept to analyse cases of economic development and establish lessons for broader management scope.