Download or read book An introduction to transform theory written by and published by Academic Press. This book was released on 1971-09-30 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: An introduction to transform theory

Download or read book Distribution Theory and Transform Analysis written by A.H. Zemanian and published by Courier Corporation. This book was released on 2011-11-30 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distribution theory, a relatively recent mathematical approach to classical Fourier analysis, not only opened up new areas of research but also helped promote the development of such mathematical disciplines as ordinary and partial differential equations, operational calculus, transformation theory, and functional analysis. This text was one of the first to give a clear explanation of distribution theory; it combines the theory effectively with extensive practical applications to science and engineering problems. Based on a graduate course given at the State University of New York at Stony Brook, this book has two objectives: to provide a comparatively elementary introduction to distribution theory and to describe the generalized Fourier and Laplace transformations and their applications to integrodifferential equations, difference equations, and passive systems. After an introductory chapter defining distributions and the operations that apply to them, Chapter 2 considers the calculus of distributions, especially limits, differentiation, integrations, and the interchange of limiting processes. Some deeper properties of distributions, such as their local character as derivatives of continuous functions, are given in Chapter 3. Chapter 4 introduces the distributions of slow growth, which arise naturally in the generalization of the Fourier transformation. Chapters 5 and 6 cover the convolution process and its use in representing differential and difference equations. The distributional Fourier and Laplace transformations are developed in Chapters 7 and 8, and the latter transformation is applied in Chapter 9 to obtain an operational calculus for the solution of differential and difference equations of the initial-condition type. Some of the previous theory is applied in Chapter 10 to a discussion of the fundamental properties of certain physical systems, while Chapter 11 ends the book with a consideration of periodic distributions. Suitable for a graduate course for engineering and science students or for a senior-level undergraduate course for mathematics majors, this book presumes a knowledge of advanced calculus and the standard theorems on the interchange of limit processes. A broad spectrum of problems has been included to satisfy the diverse needs of various types of students.

Download or read book Introduction to the Theory and Application of the Laplace Transformation written by Gustav Doetsch and published by Springer. This book was released on 1974 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: In anglo-american literature there exist numerous books, devoted to the application of the Laplace transformation in technical domains such as electrotechnics, mechanics etc. Chiefly, they treat problems which, in mathematical language, are governed by ordi­ nary and partial differential equations, in various physically dressed forms. The theoretical foundations of the Laplace transformation are presented usually only in a simplified manner, presuming special properties with respect to the transformed func­ tions, which allow easy proofs. By contrast, the present book intends principally to develop those parts of the theory of the Laplace transformation, which are needed by mathematicians, physicists a,nd engineers in their daily routine work, but in complete generality and with detailed, exact proofs. The applications to other mathematical domains and to technical prob­ lems are inserted, when the theory is adequately· developed to present the tools necessary for their treatment. Since the book proceeds, not in a rigorously systematic manner, but rather from easier to more difficult topics, it is suited to be read from the beginning as a textbook, when one wishes to familiarize oneself for the first time with the Laplace transforma­ tion. For those who are interested only in particular details, all results are specified in "Theorems" with explicitly formulated assumptions and assertions. Chapters 1-14 treat the question of convergence and the mapping properties of the Laplace transformation. The interpretation of the transformation as the mapping of one function space to another (original and image functions) constitutes the dom­ inating idea of all subsequent considerations.

Download or read book An Introduction to Complex Analysis and the Laplace Transform written by Vladimir Eiderman and published by CRC Press. This book was released on 2021-12-20 with total page 383 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this comparatively short textbook is a sufficiently full exposition of the fundamentals of the theory of functions of a complex variable to prepare the student for various applications. Several important applications in physics and engineering are considered in the book. This thorough presentation includes all theorems (with a few exceptions) presented with proofs. No previous exposure to complex numbers is assumed. The textbook can be used in one-semester or two-semester courses. In one respect this book is larger than usual, namely in the number of detailed solutions of typical problems. This, together with various problems, makes the book useful both for self- study and for the instructor as well. A specific point of the book is the inclusion of the Laplace transform. These two topics are closely related. Concepts in complex analysis are needed to formulate and prove basic theorems in Laplace transforms, such as the inverse Laplace transform formula. Methods of complex analysis provide solutions for problems involving Laplace transforms. Complex numbers lend clarity and completion to some areas of classical analysis. These numbers found important applications not only in the mathematical theory, but in the mathematical descriptions of processes in physics and engineering.

Download or read book An Introduction to Transform Theory written by and published by . This book was released on 1971 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Distribution Theory written by Gerrit Dijk and published by Walter de Gruyter. This book was released on 2013-03-22 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: The theory of distributions has numerous applications and is extensively used in mathematics, physics and engineering. There is however relatively little elementary expository literature on distribution theory. This book is intended as an introduction. Starting with the elementary theory of distributions, it proceeds to convolution products of distributions, Fourier and Laplace transforms, tempered distributions, summable distributions and applications. The theory is illustrated by several examples, mostly beginning with the case of the real line and then followed by examples in higher dimensions. This is a justified and practical approach, it helps the reader to become familiar with the subject. A moderate number of exercises are added. It is suitable for a one-semester course at the advanced undergraduate or beginning graduate level or for self-study.

Download or read book The Laplace Transform written by Joel L. Schiff and published by . This book was released on 2014-01-15 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to the Laplace Transform written by Peter K.F. Kuhfittig and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to give an introduction to the Laplace transform on the undergraduate level. The material is drawn from notes for a course taught by the author at the Milwaukee School of Engineering. Based on classroom experience, an attempt has been made to (1) keep the proofs short, (2) introduce applications as soon as possible, (3) concentrate on problems that are difficult to handle by the older classical methods, and (4) emphasize periodic phenomena. To make it possible to offer the course early in the curriculum (after differential equations), no knowledge of complex variable theory is assumed. However, since a thorough study of Laplace. transforms requires at least the rudiments of this theory, Chapter 3 includes a brief sketch of complex variables, with many of the details presented in Appendix A. This plan permits an introduction of the complex inversion formula, followed by additional applications. The author has found that a course taught three hours a week for a quarter can be based on the material in Chapters 1, 2, and 5 and the first three sections of Chapter 7. If additional time is available (e.g., four quarter-hours or three semester-hours), the whole book can be covered easily. The author is indebted to the students at the Milwaukee School of Engineering for their many helpful comments and criticisms.

Download or read book Borel Laplace Transform and Asymptotic Theory written by Boris Yu. Sternin and published by CRC Press. This book was released on 1995-10-20 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: The resurgent function theory introduced by J. Ecalle is one of the most interesting theories in mathematical analysis. In essence, the theory provides a resummation method for divergent power series (e.g., asymptotic series), and allows this method to be applied to mathematical problems. This new book introduces the methods and ideas inherent in resurgent analysis. The discussions are clear and precise, and the authors assume no previous knowledge of the subject. With this new book, mathematicians and other scientists can acquaint themselves with an interesting and powerful branch of asymptotic theory - the resurgent functions theory - and will learn techniques for applying it to solve problems in mathematics and mathematical sciences.

Download or read book An Introduction to Laplace Transforms and Fourier Series written by P.P.G. Dyke and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introduction to Laplace transforms and Fourier series is aimed at second year students in applied mathematics. It is unusual in treating Laplace transforms at a relatively simple level with many examples. Mathematics students do not usually meet this material until later in their degree course but applied mathematicians and engineers need an early introduction. Suitable as a course text, it will also be of interest to physicists and engineers as supplementary material.

Download or read book Z Transform Theory and Applications written by Robert Vich and published by Springer. This book was released on 1987-06-30 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Numerical Methods for Laplace Transform Inversion written by Alan M. Cohen and published by Springer Science & Business Media. This book was released on 2007-06-16 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives background material on the theory of Laplace transforms, together with a fairly comprehensive list of methods that are available at the current time. Computer programs are included for those methods that perform consistently well on a wide range of Laplace transforms. Operational methods have been used for over a century to solve problems such as ordinary and partial differential equations.

Download or read book Introduction to the Laplace Transform written by Peter K.F. Kuhfittig and published by Springer Science & Business Media. This book was released on 1978-04 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to give an introduction to the Laplace transform on the undergraduate level. The material is drawn from notes for a course taught by the author at the Milwaukee School of Engineering. Based on classroom experience, an attempt has been made to (1) keep the proofs short, (2) introduce applications as soon as possible, (3) concentrate on problems that are difficult to handle by the older classical methods, and (4) emphasize periodic phenomena. To make it possible to offer the course early in the curriculum (after differential equations), no knowledge of complex variable theory is assumed. However, since a thorough study of Laplace. transforms requires at least the rudiments of this theory, Chapter 3 includes a brief sketch of complex variables, with many of the details presented in Appendix A. This plan permits an introduction of the complex inversion formula, followed by additional applications. The author has found that a course taught three hours a week for a quarter can be based on the material in Chapters 1, 2, and 5 and the first three sections of Chapter 7. If additional time is available (e.g., four quarter-hours or three semester-hours), the whole book can be covered easily. The author is indebted to the students at the Milwaukee School of Engineering for their many helpful comments and criticisms.

Download or read book A Student s Guide to Fourier Transforms written by John Francis James and published by Cambridge University Press. This book was released on 2002-09-19 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fourier transform theory is of central importance in a vast range of applications in physical science, engineering, and applied mathematics. This new edition of a successful student text provides a concise introduction to the theory and practice of Fourier transforms, using qualitative arguments wherever possible and avoiding unnecessary mathematics. After a brief description of the basic ideas and theorems, the power of the technique is then illustrated by referring to particular applications in optics, spectroscopy, electronics and telecommunications. The rarely discussed but important field of multi-dimensional Fourier theory is covered, including a description of computer-aided tomography (CAT-scanning). The final chapter discusses digital methods, with particular attention to the fast Fourier transform. Throughout, discussion of these applications is reinforced by the inclusion of worked examples. The book assumes no previous knowledge of the subject, and will be invaluable to students of physics, electrical and electronic engineering, and computer science.

Download or read book The Cauchy Transform written by Joseph A. Cima and published by American Mathematical Soc.. This book was released on 2006 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Cauchy transform of a measure on the circle is a subject of both classical and current interest with a sizable literature. This book is a thorough, well-documented, and readable survey of this literature and includes full proofs of the main results of the subject. This book also covers more recent perturbation theory as covered by Clark, Poltoratski, and Aleksandrov and contains an in-depth treatment of Clark measures.

Download or read book Pulse and Fourier Transform NMR written by Thomas C. Farrar and published by Elsevier. This book was released on 2012-12-02 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pulse and Fourier Transform NMR: Introduction to Theory and Methods presents the different types of pulse experiments that are commonly used and provides the theoretical background necessary for understanding these techniques. This book evaluates the practical application of pulse methods and the necessary instrumentation. Organized into seven chapters, this book begins with an overview of the NMR fundamentals and the basic pulse methods. This text then summarizes the important features of pulse spectrometers. Other chapters consider the rationale, the advantages, and the limitations of Fourier transform NMR methods. This book discusses as well how the idea of the rotating frame can be utilized to understand certain experiments that extend the range of application of pulse methods. The final chapter deals with a few significant special uses of pulse techniques. This book is a valuable resource for chemists and readers who are familiar with high resolution NMR but with no background in pulse methods.

Download or read book Mathematics of the Discrete Fourier Transform DFT written by Julius O. Smith and published by Julius Smith. This book was released on 2008 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The DFT can be understood as a numerical approximation to the Fourier transform. However, the DFT has its own exact Fourier theory, and that is the focus of this book. The DFT is normally encountered as the Fast Fourier Transform (FFT)--a high-speed algorithm for computing the DFT. The FFT is used extensively in a wide range of digital signal processing applications, including spectrum analysis, high-speed convolution (linear filtering), filter banks, signal detection and estimation, system identification, audio compression (such as MPEG-II AAC), spectral modeling sound synthesis, and many others. In this book, certain topics in digital audio signal processing are introduced as example applications of the DFT"--Back cover