Download or read book An Introduction to Textures in Metals written by M. Hatherly and published by Ashgate Publishing. This book was released on 1979 with total page 86 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Texture Analysis written by Olaf Engler and published by CRC Press. This book was released on 2009-11-16 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of Introduction to Texture Analysis: Macrotexture, Microtexture, and Orientation Mapping broke new ground by collating seventy years worth of research in a convenient single-source format. Reflecting emerging methods and the evolution of the field, the second edition continues to provide comprehensive coverage of the concepts, pra
Download or read book Preferred Orientation in Deformed Metal and Rocks written by Hans Rudolf Wenk and published by Elsevier. This book was released on 2013-10-22 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides an introduction to the texture analysis of deformed materials and explores methods of determining and interpreting the preferred orientation of crystals in deformed polycrystalline aggregates.**The book reviews: 1) the techniques, procedures, and theoretical basis for the accumulation and analysis of orientation data; 2)the processes by which polycrystals deform and the microstructural mechanisms responsible for the development of the preferred orientation; 3) the textures in specific systems and application of principles to the solution of specific problems.**With a combination of metallurgic and geologic applications, Preferred Orientation in Deformed Metals and Rocks: An Introduction to Modern Texture Analysis will be an important source book for students and researchers in materials science, solid state physics, structural geology, and geophysics.**FROM THE PREFACE: Determination and interpretation of the preferred orientation of crystals in deformed polycrystalline aggregates (in this volume also referred to as texture) has been of longstanding concern to both materials scientists and geologists. A similar theoretical background--such as the dislocation theory of crystal plasticity--has been the basis of understanding flow in metals and rocks; and similar determinative techniques--including microscopy and x-ray diffraction--have been used to study textures and microstructures. Whereas many of the fundamental principles have been established early this century by scientists such as Jeffery, Sachs, Sander, Schmid, Schmidt, and Taylor, only in recent years has knowledge reached a level that provides a quantitative framework which has replaced a largely phenomenological approach. This is expressed in the sudden new emphasis on textural studies, as documented by the large number of recent publications.**This volume contains material to serve as an introduction for those who wish to enter this field as well as reviews for those who are already engaged in advanced research....**The book is divided into three parts. The first (Chapters 2*b17) deals with techniques, procedures, and theoretical bases for the accumulation and analysis of orientation data. The second (Chapters 8*b112) introduces processes by which polycrystals deform and the microstructural mechanisms responsible for the development of the preferred orientation. All those chapters emphasize basic principles and apply to metals as well as to minerals. The third part (Chapters 13*b126) illustrates textures in specific systems and the application of the principles set out in the earlier chapters to the solution of specific problems. Readers of these chapters will quickly become aware that metals have been more exhaustively studied than minerals; but they will also realize that, because of their structural symmetry, metals are in general much simpler than rocks and that the intepretation of metal textures is less involved. An extensive list of relevant references provides access to much of the original literature on textures....
Download or read book Crystallographic Texture of Materials written by Satyam Suwas and published by Springer. This book was released on 2016-09-10 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a comprehensive and invaluable overview of the basics of crystallographic textures and their industrial applications, this book covers a broad range of both structural and functional materials. It introduces the existing methods of representation in an accessible manner and presents a thorough overview of existing knowledge on texture of metallic materials. Texture analysis has widespread use in many industries, and provides crucial input towards the development of new materials and products. There has been rapid growth in the science and art of texture analysis in the last few decades. Other topics addressed within this book include recent research on texture in thin films and non-metals, and the dependence of material properties on texture, and texture control in some engineering materials. This book constitutes an invaluable reference text for researchers and professionals working on texture analysis in metallurgy, materials science and engineering, physics and geology. By using content selectively, it is also highly accessible to undergraduate students.
Download or read book Texture Analysis in Materials Science written by H.-J. Bunge and published by Elsevier. This book was released on 2013-09-03 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: Texture Analysis in Materials Science Mathematical Methods focuses on the methodologies, processes, techniques, and mathematical aids in the orientation distribution of crystallites. The manuscript first offers information on the orientation of individual crystallites and orientation distributions. Topics include properties and representations of rotations, orientation distance, and ambiguity of rotation as a consequence of crystal and specimen symmetry. The book also takes a look at expansion of orientation distribution functions in series of generalized spherical harmonics, fiber textures, and methods not based on the series expansion. The publication reviews special distribution functions, texture transformation, and system of programs for the texture analysis of sheets of cubic materials. The text also ponders on the estimation of errors, texture analysis, and physical properties of polycrystalline materials. Topics include comparison of experimental and recalculated pole figures; indetermination error for incomplete pole figures; and determination of the texture coefficients from anisotropie polycrystal properties. The manuscript is a dependable reference for readers interested in the use of mathematical aids in the orientation distribution of crystallites.
Download or read book Introduction to Texture Analysis written by Valerie Randle and published by CRC Press. This book was released on 2000-08-07 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encompassing the concepts, practice, and application of orientation analysis, Introduction to Texture Analysis is an essential reference source for reserachers in textiles. The author uses an accessible style to share her expertise, providing comprehensive coverage of the theory and practice of the texture techniques now available and discusses their applications in research and industry. The text considers the merits of each technique for specific applications. Case studies expand upon the author's explanations and help illustrate the main principles involved. Topics include applications of diffraction, SEM- and TEM-based techniques, and crystallographic analyses.
Download or read book Texture and the Properties of Materials written by Grahame John Davies and published by . This book was released on 1976 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Texture and Anisotropy written by U. F. Kocks and published by Cambridge University Press. This book was released on 2000-08-15 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt: A successful book covering an important area of materials science, now available in paperback.
Download or read book Formability of Metallic Materials written by D. Banabic and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: After a brief introduction into crystal plasticity,the fun- damentals of crystallographic textures and plastic anisotro- py, a main topic of this book, are outlined. A large chapter is devoted to formability testing both for bulk metal and sheet metal forming. For the first time testing methods for plastic anisotropy of round bars and tubes are included. A profound survey is given of literature about yield criteria for anisotropic materials up to most recent developments and the calculation of forming limits of anisotropic sheet me- tal. Other chapters are concerned with properties of workpieces after metal forming as well as the fundamentals of the theory of plasticity and finite element simulation of metal forming processes. The book is completed by a collection of tables of international standards for formability testing and of flow curves of metals which are most commonly used in metal forming. It is addressed both to university and industrial readers.
Download or read book Crystal Plasticity Finite Element Methods written by Franz Roters and published by John Wiley & Sons. This book was released on 2011-08-04 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the leading experts in computational materials science, this handy reference concisely reviews the most important aspects of plasticity modeling: constitutive laws, phase transformations, texture methods, continuum approaches and damage mechanisms. As a result, it provides the knowledge needed to avoid failures in critical systems udner mechanical load. With its various application examples to micro- and macrostructure mechanics, this is an invaluable resource for mechanical engineers as well as for researchers wanting to improve on this method and extend its outreach.
Download or read book Introduction to Texture Analysis written by Olaf Engler and published by CRC Press. This book was released on 2024-02-27 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting emerging methods and the evolution of the field, Introduction to Texture Analysis: Macrotexture, Microtexture, and Orientation Mapping keeps mathematics to a minimum in covering both traditional macrotexture analysis and more advanced electron-microscopy-based microtexture analysis. The authors integrate the two techniques and address the subsequent need for a more detailed explanation of philosophy, practice, and analysis associated with texture analysis. The book illustrates approaches to orientation measurement and interpretation and elucidates the fundamental principles on which measurements are based. Thoroughly updated, this Third Edition of a best-seller is a rare introductory-level guide to texture analysis. Discusses terminology associated with orientations, texture, and their representation, as well as the diffraction of radiation, a phenomenon that is the basis for almost all texture analysis Covers data acquisition, as well as representation and evaluation related to the well-established methods of macrotexture analysis Updated to include experimental details of the latest transmission or scanning electron microscope-based techniques for microstructure analysis, including electron backscatter diffraction (EBSD) Describes how microtexture data are evaluated and represented and emphasizes the advances in orientation microscopy and mapping, and advanced issues concerning crystallographic aspects of interfaces and connectivity Offers new and innovative grain boundary descriptions and examples This book is an ideal tool to help readers in the materials sciences develop a working understanding of the practice and applications of texture.
Download or read book Handbook of Materials Behavior Models written by Jean Lemaitre (ed.) and published by Academic Press. This book was released on 2001 with total page 1231 pages. Available in PDF, EPUB and Kindle. Book excerpt: V. 1. Deformations of materials -- v. 2. Failures of materials -- v. 3. Multiphysics behaviors includes three-volume index.
Download or read book Plasticity and Textures written by W. Gambin and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: The classical, phenomenological theory of plastically anisotropic materials has passed a long way: from the work of von Mises presented in 1928, and the HilI formulation given in 1948, to the latest papers on large elastic-plastic deformations of anisotropic metal sheets. A characteristic feature of this approach is a linear flow rule and a quadratic yield criterion. Mathematical simplicity of the theory is a reason of its numerous applications to the analysis of engineering structures during the onset of plastic deformations. However, such an approach is not sufficient for description of the metal forming processes, when a metal element undergoes very large plastic strains. If we take an initially isotropic piece of metal, it becomes plastically anisotropic during the forming process, and the induced anisotropy progressively increases. This fact strongly determines directions of plastic flow, and it leads to an unexpected strain localization in sheet elements. To explain the above, it is necessary to take into account a polycrystalline structure of the metal, plastic slips on slip systems of grains, crystallographic lattice rotations, and at last, a formation of textures and their evolution during the whole deformation process. In short, it is necessary to introduce the plasticity of crystals and polycrystals. The polycrystal analysis shows that, when the advanced plastic strains take place, some privileged crystallographic directions, called a crystallographic texture, occur in the material. The texture formation and evolution are a primary reason for the induced plastic anisotropy in pure metals.
Download or read book Strength of Metals and Alloys ICSMA 7 written by H. J. McQueen and published by Elsevier. This book was released on 2016-07-29 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: Strength of Metals and Alloys, Volume 3 (ICSMA 7) presents the proceedings of the 7th International Conference on the Strength of Metals and Alloys held in Montreal, Canada on August 12-16, 1985. The book includes papers on the work hardening of face-centered cubic single crystals; precipitation hardening; and microstructure evolution and flow stress during hot working. The text also covers papers on microstructure evolution and flow stress during hot working; the prediction of deformation textures in cubic metals; creep of copper-base shape memory alloys; and flow behavior of nickel-base superalloys at isothermal forging temperatures and strain rates. Grain refinement by recrystallization hot-rolling to achieve high strength and notch toughness in microalloyed steel plate; as well as the influence of mean stress on fatigue strength of TI-6A1-4V are also encompassed. The book further includes papers on the comparative mechanical properties of human bones; the effect of precipitation hardening on the decomposition of the solid solution in 7075 alloy during quenching; and the mechanical properties of stable and unstable austenitic stainless steels.
Download or read book Harmonic Analysis for Engineers and Applied Scientists written by Gregory S. Chirikjian and published by Courier Dover Publications. This book was released on 2016-07-20 with total page 881 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the Fourier transform is among engineering's most widely used mathematical tools, few engineers realize that the extension of harmonic analysis to functions on groups holds great potential for solving problems in robotics, image analysis, mechanics, and other areas. This self-contained approach, geared toward readers with a standard background in engineering mathematics, explores the widest possible range of applications to fields such as robotics, mechanics, tomography, sensor calibration, estimation and control, liquid crystal analysis, and conformational statistics of macromolecules. Harmonic analysis is explored in terms of particular Lie groups, and the text deals with only a limited number of proofs, focusing instead on specific applications and fundamental mathematical results. Forming a bridge between pure mathematics and the challenges of modern engineering, this updated and expanded volume offers a concrete, accessible treatment that places the general theory in the context of specific groups.
Download or read book Textures in Non ferrous Metals and Alloys written by H. D. Merchant and published by . This book was released on 1985 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analytical Characterization of Aluminum Steel and Superalloys written by D. Scott MacKenzie and published by CRC Press. This book was released on 2005-10-10 with total page 768 pages. Available in PDF, EPUB and Kindle. Book excerpt: This one-of-a-kind reference examines conventional and advanced methodologies for the quantitative evaluation of properties and characterization of microstructures in metals. It presents methods for uncovering valuable information including precipitate mechanisms, kinetics, stability, crystallographic orientation, the effects of thermo-mechanical p