Download or read book An Introduction to Surface Alloying of Metals written by Santosh S. Hosmani and published by Springer Science & Business. This book was released on 2014-04-25 with total page 140 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Surface Alloying of Metals aims to serve as a primer to the basic aspects of surface alloying of metals. The book serves to elucidate fundamentals of surface modification and their engineering applications. The book starts with basics of surface alloying and goes on to cover key surface alloying methods, such as carburizing, nitriding, chromizing, duplex treatment and the characterization of surface layers. The book will prove useful to students at both the undergraduate and graduate levels, as also to researchers and practitioners looking for a quick introduction to surface alloying.

Download or read book Electronic Structure of Alloys Surfaces and Clusters written by Abhijit Mookerjee and published by CRC Press. This book was released on 2002-11-28 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the electronic structure of solids is a basic part of theoretical investigation in physics. Application of investigative techniques requires the solid under investigation to be "periodic." However, this is not always the case. This volume addresses three classes of "non-periodic" solids currently undergoing the most study: alloys, surfaces and clusters. Understanding the electronic structure of these systems is fundamental not only for the basic science, but also constitutes a very important step in various technological aspects, such as tuning their stabilities, chemical and catalytic reactivities and magnetism. Expert practitioners give an up-to-date account of the field with enough detailed background so that even a newcomer can follow the development. The theoretical framework is discussed in addition to the present status of knowledge in the field. Electronic Structure of Alloys, Surfaces and Clusters also includes an extensive bibliography which provides a comprehensive reading list of work on the topic.

Download or read book Laser Surface Modification of Alloys for Corrosion and Erosion Resistance written by C T Kwok and published by Elsevier. This book was released on 2012-03-20 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion and erosion processes often occur synergistically to cause serious damage to metal alloys. Laser surface modification techniques such as laser surface melting or alloying are being increasingly used to treat surfaces to prevent corrosion or repair corroded or damaged components. Laser surface modification of alloys for corrosion and erosion resistance reviews the wealth of recent research on these important techniques and their applications.After an introductory overview, part one reviews the use of laser surface melting and other techniques to improve the corrosion resistance of stainless and other steels as well as nickel-titanium and a range of other alloys. Part two covers the use of laser surface modification to prevent different types of erosion, including liquid impingement, slurry (solid particle) and electrical erosion as well as laser remanufacturing of damaged components.With its distinguished editor and international team of contributors, Laser surface modification of alloys for corrosion and erosion resistance is a standard reference for all those concerned with preventing corrosion and erosion damage in metallic components in sectors as diverse as energy production and electrical engineering. - Reviews recent research on the use of laser surface modification techniques, including the prevention of corrosion and repair of corroded or damaged components - Discusses the techniques for improving the corrosion resistance of steels, nickel-titanium and a range of alloys - Analyses the use of laser surface modification to prevent different types of erosion, including liquid impingement and laser remanufacturing of damaged components

Download or read book Introduction to Aluminum Alloys and Tempers written by J. Gilbert Kaufman and published by ASM International. This book was released on 2000 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation Examines characteristics of wrought and cast aluminum alloys, then presents basic aluminum alloy and temper designation systems, as developed by the Aluminum Association, and explains them with examples. Wrought and cast aluminum designations are treated in a similar fashion. Processes used to produce aluminum alloy products are described briefly, and representative applications for aluminum alloys and tempers are detailed, in areas such as electrical markets, building and construction, marine and rail transportation, packaging, and petroleum and chemical industry components. A final chapter presents 65 pages of bandw micrographs illustrating the microstructure of a range of aluminum alloys and tempers, to assist in understanding consequences of applying the production technology implied by the temper designations. Annotation copyrighted by Book News, Inc., Portland, OR

Download or read book Fundamentals of Aluminium Metallurgy written by Roger Lumley and published by Woodhead Publishing. This book was released on 2018-05-22 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Aluminium Metallurgy: Recent Advances updates the very successful book Fundamentals of Aluminium Metallurgy. As the technologies related to casting and forming of aluminum components are rapidly improving, with new technologies generating alternative manufacturing methods that improve competitiveness, this book is a timely resource. Sections provide an overview of recent research breakthroughs, methods and techniques of advanced manufacture, including additive manufacturing and 3D printing, a comprehensive discussion of the status of metalcasting technologies, including sand casting, permanent mold casting, pressure diecastings and investment casting, and recent information on advanced wrought alloy development, including automotive bodysheet materials, amorphous glassy materials, and more. Target readership for the book includes PhD students and academics, the casting industry, and those interested in new industrial opportunities and advanced products. Includes detailed and specific information on the processing of aluminum alloys, including additive manufacturing and advanced casting techniques Written for a broad ranging readership, from academics, to those in the industry who need to know about the latest techniques for working with aluminum Comprehensive, up-to-date coverage, with the most recent advances in the industry

Download or read book Plasma Surface Metallurgy written by Zhong Xu and published by Springer. This book was released on 2017-09-21 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive introduction to and technical description of a unique patented surface-modification technology: plasma surface metallurgy with double-glow discharge plasma process, known as the Xu-Tec process. As such it promotes further attention and interest in scientific research and engineering development in this area, as well as industrial utilization and product commercialization. The Xu-Tec process has opened up a new material engineering field of “Plasma Surface Metallurgy”. This surface-modification process can transform many low-grade and low-cost industrial engineering materials into “gold” materials with a high value and high grade or special functions. This improved material can be widely used in industrial production to improve the surface performance and quality of mechanical parts and manufacturing products, and to conserve expensive alloying elements for the benefit of all mankind. “This book will be valuable to those in the general area of surface metallurgy. The substantial description of the Xu-Tec process is very important and should assist in expanding the use of this superior technique. The in-depth explanation of glow discharges and their use in general will also serve as a valuable reference in the field.” James E. Thompson, Prof. Fellow of the IEEE Dean of Engineering Emeritus University of Missouri, Columbia, Missouri, USA November, 2016 "A BREAKTHROUGH IN MAKING METAL TOUGHER". ---- SCIENCE & TECHNOLOGY Business Week, July 24, 1989 “NOVEL SURFACE ALLOYING PROCESS” --- THE LEADING EDGE TECHNOLOGY WORDWIDE Materials and Processing Report, Dec. 1987

Download or read book Fundamentals of Magnesium Alloy Metallurgy written by Mihriban O Pekguleryuz and published by Elsevier. This book was released on 2013-03-11 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnesium and magnesium alloys offer a wealth of valuable properties, making them of great interest for use across a wide range of fields. This has led to extensive research focused on understanding the properties of magnesium and how these can be controlled during processing. Fundamentals of magnesium alloy metallurgy presents an authoritative overview of all aspects of magnesium alloy metallurgy, including physical metallurgy, deformation, corrosion and applications.Beginning with an introduction to the primary production of magnesium, the book goes on to discuss physical metallurgy of magnesium and thermodynamic properties of magnesium alloys. Further chapters focus on understanding precipitation processes of magnesium alloys, alloying behaviour of magnesium, and alloy design. The formation, corrosion and surface finishing of magnesium and its alloys are reviewed, before Fundamentals of magnesium alloy metallurgy concludes by exploring applications across a range of fields. Aerospace, automotive and other structural applications of magnesium are considered, followed by magnesium-based metal matrix composites and the use of magnesium in medical applications.With its distinguished editors and international team of expert contributors, Fundamentals of magnesium alloy metallurgy is a comprehensive tool for all those involved in the production and application of magnesium and its alloys, including manufacturers, welders, heat-treatment and coating companies, engineers, metallurgists, researchers, designers and scientists working with these important materials. - Overviews all aspects of magnesium alloy metallurgy - Discusses physical metallurgy of magnesium and thermodynamic properties of magnesium alloys - Reviews the formation, corrosion and surface finishing of magnesium and its alloys

Download or read book Principles of Metal Surface Treatment and Protection written by D. R. Gabe and published by Elsevier. This book was released on 2014-07-22 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Principles of Metal Surface Treatment and Protection deals with the principles of metal surface treatment and protection. Topics covered range from electrodeposition and hot dip coating to diffusion and non-metallic coatings, as well as oxide and conversion coatings. The theory of corrosion protection is also discussed. Comprised of eight chapters, this volume begins with an overview of the corrosion of metals and the scope of protection against corrosion, followed by a detailed treatment of electrodeposition. The discussion then turns to the principles of hot dipping as a coating method; the formation of a diffusion coating; and the role of a non-metallic coating in corrosion protection. Subsequent chapters focus on the protection of oxide films against corrosion by means of anodizing, phosphatizing, and the use of tin free steel; testing and selection of a particular coating for corrosion resistance applications; and the theory of corrosion protection. This book is intended for metal-finishing scientists and students of metallurgy and metal finishing.

Download or read book Surface Engineering of Light Alloys written by Hanshan Dong and published by Elsevier. This book was released on 2010-05-24 with total page 681 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growing use of light alloys in industries such as aerospace, sports equipment and biomedical devices is driving research into surface engineering technologies to enhance their properties for the desired end use. Surface engineering of light alloys: Aluminium, magnesium and titanium alloys provides a comprehensive review of the latest technologies for modifying the surfaces of light alloys to improve their corrosion, wear and tribological properties. Part one discusses surface degradation of light alloys with chapters on corrosion behaviour of magnesium alloys and protection techniques, wear properties of aluminium-based alloys and tribological behaviour of titanium alloys. Part two reviews surface engineering technologies for light alloys including anodising, plasma electrolytic oxidation, thermal spraying, cold spraying, physical vapour deposition, plasma assisted surface treatment, PIII/PSII treatments, laser surface modification, ceramic conversion and duplex treatments. Part three covers applications for surface engineered light alloys including sports equipment, biomedical devices and plasma electrolytic oxidation and anodised aluminium alloys for spacecraft applications. With its distinguished editor and international team of contributors, Surface engineering of light alloys: Aluminium, magnesium and titanium alloys is a standard reference for engineers, metallurgists and materials scientists looking for a comprehensive source of information on surface engineering of aluminium, magnesium and titanium alloys. Discusses surface degradation of light alloys considering corrosion behaviour and wear and tribological properties Examines surface engineering technologies and modification featuring plasma electrolytic oxidation treatments and both thermal and cold spraying Reviews applications for engineered light alloys in sports equipment, biomedical devices and spacecraft

Download or read book Improvement in the Method of the Surface Alloying of Refractory Metals in Aluminum Melts written by P. F. Shulenok and published by . This book was released on 1970 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hot-dip calorizing of refractory metals, e.g. Ti, Nb and Mo, in aluminum melts is of special interest considering that the process is carried out at relatively low temperatures over a short period of time without requiring a special shielding atmosphere; the compounds of aluminum with refractory metals - the aluminides - display a marked high-temperature strength. Previously, however, the shortcomings of this process did not warrant its widespread industrial introduction. In this connection, the author describes a technique he employed to apply coatings of molten Al to small laboratory specimens of Ti, Nb and Mo. An intermediate container with the specimens is placed in the bath of molten aluminum for the necessary length of time, whereupon it is removed and transferred to a nearby furnace crucible so that the excess molten aluminum can be shed by gravity. With the aid of this method the effect of various factors such as the preparation of specimen surfaces, the alloying of the aluminum bath with such elements as Si or Be in order to reduce the oxidation of its surface, the melt temperature, etc. could be investigated. It was thus found that the formation of protective coatings of the molten metal on the solid metal involves such processes as wetting, adhesion and sorption.

Download or read book Introduction to Surface Engineering written by P. A. Dearnley and published by Cambridge University Press. This book was released on 2017-01-16 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highly illustrated reference work covers the three principal types of surface technologies that best protect engineering devices and products: diffusion technologies, deposition technologies, and other less commonly acknowledged surface engineering (SE) techniques. Various applications are noted throughout the text and additionally whole chapters are devoted to specific SE applications across the automotive, gas turbine engine (GTE), metal machining, and biomedical implant sectors. Along with the benefits of SE, this volume also critically examines SE's limitations. Materials degradation pathways - those which can and those which cannot be mitigated by SE - are rigorously explained. Written from a scientific, materials engineering perspective, this concise text is supported by high-quality images and photo-micrographs which show how surfaces can be engineered to overcome the limits of conventionally produced materials, even in complex or hostile operating environments. This book is a useful resource for undergraduate and postgraduate students as well as professional engineers.

Download or read book Complex Metallic Alloys written by Jean-Marie Dubois and published by John Wiley & Sons. This book was released on 2010-12-13 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering fundamental research as well as real-world applications, this first book on CMAs at an introductory level treats everything from atomistic details to surface processing. Comprehensive, self-contained chapters provide readers with the latest knowledge on the most salient features of the topic, selected in terms of their relevance to potential technological applications. Edited by one of the most distinguished authorities on quasicrystals and this most important of their subclasses, the contributions elucidate aspects of CMAs from a particular viewpoint: physical and chemical characteristics in the sub-nanometer regime, mesoscale phenomena, preparation and processing of thin films, and large-scale engineering properties. The whole is rounded off by a look at the commercial potential of CMA-based applications. For PhD students and lecturers alike.

Download or read book The Electrical Resistivity of Metals and Alloys written by Paul L. Rossiter and published by Cambridge University Press. This book was released on 1991-03-07 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in paperback, this comprehensive book is the first text devoted to the problem of understanding the electrical properties of metals and alloys. Dr Rossiter, well-known for his work on the electrical resistivity of alloys, has written a book which blends results and theory, but does not rely on a strong grounding in quantum mechanics. After an introduction to the basic ideas, the concepts of atomic and magnetic correlations and their microstructural consequences are explained. Later chapters then deal with the effects of such correlations on electrical resistivity. Examples and applications of the concepts derived are given in discrete sections, allowing the uninterrupted development of theory for each specific problem, and enhancing the value of the book for a wide range of readers from theoretical and experimental solid state physicists to metallurgists and materials scientists. Anyone with an interest in the electrical conduction process or in the application of resistivity measurements to the study of alloy configuration will find this essential reading.

Download or read book Copper Brass and Bronze Surfaces written by L. William Zahner and published by John Wiley & Sons. This book was released on 2020-03-24 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: A FULL-COLOR GUIDE FOR ARCHITECTS AND DESIGN PROFESSIONALS TO THE SELECTION AND APPLICATION OF COPPER, BRASS, AND BRONZE Copper, Brass, and Bronze Surfaces, third in Zahner's Architectural Metals Series, provides a comprehensive and authoritative treatment of copper, brass, and bronze applications in architecture and art. If offers architecture and design professionals the information they need to ensure proper maintenance and fabrication techniques through detailed information and full-color images. It covers everything from the history of the metals and choosing the right alloy, to detailed information on a variety of surface and chemical finishes and corrosion resistance. The book also features case studies that offer strategies for designing and executing successful projects using copper, brass, and bronze. Copper, Brass, and Bronze Surfaces is filled with illustrated case studies that present comprehensive coverage of how each metal is used in creating surfaces for building exteriors, interiors, and art finishes. All the books in Zahner's Architectural Metals Series offer in-depth coverage of today's most commonly used metals in architecture and art. This visual guide: Features full-color images of a variety of copper, brass, and bronze finishes, colors, textures, and forms Includes case studies with performance data that feature strategies on how to design and execute successful projects using copper, brass, and bronze Offers methods to address corrosion, before and after it occurs Explains the significance of the different alloys and the forms available to the designer Discusses what to expect when using copper, brass, and bronze in various exposures Written for architecture professionals, metal fabricators and developers, architecture students, designers, and artists working with metals, Copper, Brass, and Bronze Surfaces offers a logical framework for the selection and application of copper, brass, and bronze in all aspects of architecture.

Download or read book Laser Surface Alloying of Refractory Metals on Aluminum for Enhanced Corrosion Resistance written by Ravi Shanker Rajamure and published by . This book was released on 2014 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Surface Treatment Finishing of Aluminium written by R.G. King and published by Elsevier. This book was released on 2014-06-28 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical handbook provides an introduction to all aspects of decorative, protective and engineering finishes applicable to aluminium. Descriptions of the processes concerned, including properties and methods of application, their benefits and limitations, are given, making this manual a useful asset to managers, technologists and students.

Download or read book Introduction to Metal Ceramic Technology written by W. Patrick Naylor and published by Quintessence Publishing (IL). This book was released on 1992 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an introductory-level, skill-oriented technical guide to fabricating metal ceramic dental restorations. The book includes information on porcelain firing schedules, a list of suitable equipment, instruments and materials.