Download or read book An Introduction to Splines for Use in Computer Graphics and Geometric Modeling written by Richard H. Bartels and published by Morgan Kaufmann. This book was released on 1995-09 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the field of computer graphics develops, techniques for modeling complex curves and surfaces are increasingly important. A major technique is the use of parametric splines in which a curve is defined by piecing together a succession of curve segments, and surfaces are defined by stitching together a mosaic of surface patches. An Introduction to Splines for Use in Computer Graphics and Geometric Modeling discusses the use of splines from the point of view of the computer scientist. Assuming only a background in beginning calculus, the authors present the material using many examples and illustrations with the goal of building the reader's intuition. Based on courses given at the University of California, Berkeley, and the University of Waterloo, as well as numerous ACM Siggraph tutorials, the book includes the most recent advances in computer-aided geometric modeling and design to make spline modeling techniques generally accessible to the computer graphics and geometric modeling communities.
Download or read book Intro to Splines for Use in Computer Graphics Geometric Modeling written by R.H. Bartels and published by . This book was released on 1997 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geometric Modeling written by Hans Hagen and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on lectures presented at an international workshop on geometric modeling held at Hewlett Packard GmbH in Boblingen, FRG, in June 1990. International experts from academia and industry were selected to speak on the most interesting topics in geometric modeling. The resulting papers, published in this volume, give a state-of-the-art survey of the relevant problems and issues. The following topics are discussed: - Methods for constructing surfaces on surfaces: four different solutions to the multidimen sional problem of constructing an interpolant from surface data are provided. - Surfaces in solid modeling: current results on the implementation of free-fonn solids in three well established solid models are reviewed. - Box splines and applications: an introduction to box spline methods for the representation of surfaces is given. Basic properties of box splines are derived, and refinement and evaluation methods for box splines are presented in detail. Shape preserving properties, the construction of non-rectangular box spline surfaces, applications to surface modeling, and imbedding problems, are discussed. - Advanced computer graphics techniques for volume visualization: the steps to be executed in the visualization process of volume data are described and tools are discussed that assist in handling this data. - Rational B-splines: an introduction to the representation of curves and surfaces using rational B-splines is given, together with a critical evaluation of their potential for industrial application.
Download or read book Geometric Modeling with Splines written by Elaine Cohen and published by CRC Press. This book was released on 2001-07-18 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by researchers who have helped found and shape the field, this book is a definitive introduction to geometric modeling. The authors present all of the necessary techniques for curve and surface representations in computer-aided modeling with a focus on how the techniques are used in design. They achieve a balance between mathematical rigor
Download or read book Approximation and Modeling with B Splines written by Klaus Hollig and published by SIAM. This book was released on 2015-07-01 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: B-splines are fundamental to approximation and data fitting, geometric modeling, automated manufacturing, computer graphics, and numerical simulation. With an emphasis on key results and methods that are most widely used in practice, this textbook provides a unified introduction to the basic components of B-spline theory: approximation methods (mathematics), modeling techniques (engineering), and geometric algorithms (computer science). A supplemental Web site will provide a collection of problems, some with solutions, slides for use in lectures, and programs with demos.
Download or read book Computer Graphics and Geometric Modeling Using Beta splines written by Brian A. Barsky and published by Springer. This book was released on 2013-12-20 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Blossoming Development of Splines written by Stephen Mann and published by Morgan & Claypool Publishers. This book was released on 2006 with total page 109 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this lecture, author Stephen Mann presents Bezier and B-spline curves and surfaces, mathematical representations for free-form curves and surfaces that are common in CAD systems. They are used to design aircraft and automobiles, as well as having uses in modeling packages used by the computer animation industry. Bezier/B-splines represent polynomials and piecewise polynomials in a geometric manner using sets of control points that define the shape of the surface.The primary analysis tool used in this lecture is blossoming, which gives an elegant labeling of the control points that allow us to analyze their properties geometrically. Blossoming is used to explore both Bezier and B-spline curves, and in particular to investigate continuity properties, change of basis algorithms, forward differencing, B-spline knot multiplicity, and knot insertion algorithms. We also look at triangle diagrams (which are closely related to blossoming), direct manipulation of B-spline curves, NURBS curves, and triangular and tensor product surfaces.
Download or read book Geometric Modeling written by Hans Hagen and published by Springer. This book was released on 1991-07-18 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is based on lectures presented at an international workshop on geometric modeling held at Hewlett Packard GmbH in Boblingen, FRG, in June 1990. International experts from academia and industry were selected to speak on the most interesting topics in geometric modeling. The resulting papers, published in this volume, give a state-of-the-art survey of the relevant problems and issues. The following topics are discussed: - Methods for constructing surfaces on surfaces: four different solutions to the multidimen sional problem of constructing an interpolant from surface data are provided. - Surfaces in solid modeling: current results on the implementation of free-fonn solids in three well established solid models are reviewed. - Box splines and applications: an introduction to box spline methods for the representation of surfaces is given. Basic properties of box splines are derived, and refinement and evaluation methods for box splines are presented in detail. Shape preserving properties, the construction of non-rectangular box spline surfaces, applications to surface modeling, and imbedding problems, are discussed. - Advanced computer graphics techniques for volume visualization: the steps to be executed in the visualization process of volume data are described and tools are discussed that assist in handling this data. - Rational B-splines: an introduction to the representation of curves and surfaces using rational B-splines is given, together with a critical evaluation of their potential for industrial application.
Download or read book Curves and Surfaces in Geometric Modeling written by Jean H. Gallier and published by Morgan Kaufmann. This book was released on 2000 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Curves and Surfaces in Geometric Modeling: Theory and Algorithms offers a theoretically unifying understanding of polynomial curves and surfaces as well as an effective approach to implementation that you can apply to your own work as a graduate student, scientist, or practitioner." "The focus here is on blossoming - the process of converting a polynomial to its polar form - as a natural, purely geometric explanation of the behavior of curves and surfaces. This insight is important for more than just its theoretical elegance - the author demonstrates the value of blossoming as a practical algorithmic tool for generating and manipulating curves and surfaces that meet many different criteria. You'll learn to use this and other related techniques drawn from affine geometry for computing and adjusting control points, deriving the continuity conditions for splines, creating subdivision surfaces, and more." "It will be an essential acquisition for readers in many different areas, including computer graphics and animation, robotics, virtual reality, geometric modeling and design, medical imaging, computer vision, and motion planning."--BOOK JACKET.Title Summary field provided by Blackwell North America, Inc. All Rights Reserved
Download or read book Interactive Curve Modeling written by Muhammad Sarfraz and published by Springer Science & Business Media. This book was released on 2007-10-24 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers Curve Modeling with solutions to real life problems relating to Computer Graphics, Vision, Image Processing, Geometric Modeling and CAD/CAM. Chapters deal with basic concepts, curve design techniques and their use to various applications and a wide range of problems with their automated solutions through computers. The book provides an invaluable resource which focuses on interdisciplinary methods and affiliates up-to-date methodologies. It aims to stimulate provide a source where the reader can find the latest developments in the field including a variety of techniques, applications, and systems necessary for solving real life problems.
Download or read book Handbook on Splines for the User written by Eugene V. Shikin and published by CRC Press. This book was released on 1995-07-14 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Splines find ever increasing application in the numerical methods, computer-aided design, and computer graphics areas. The Handbook on Splines for the User not only provides an excellent introduction to basic concepts and methods but also includes the SplineGuide-a computer diskette that allows the reader to practice using important programs.These programs help the user to build interpolating and smoothing cubic and bicubic splines of all classes. Programs are described in Fortran for spline functions and C for geometric splines. The Handbook describes spline functions and geometric splines and provides simple, but effective algorithms. It covers virtually all of the important types of cubic and bicubic splines, functions, variables, curves, and surfaces. The book is written in a straightforward manner and requires little mathematical background. When necessary, the authors give theoretical treatments in an easy-to-use form. Through the Handbook on Splines for the User, introduce yourself to the exciting world of splines and learn to use them in practical applications and computer graphics.
Download or read book An Introduction to the Use of Splines in Computer Graphics written by Richard H. Bartels and published by University of Waterloo Computer Science Department. This book was released on 1983 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computer Graphics and Geometric Modeling written by David Salomon and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt: A book for those interested in how modern graphics programs work and how they can generate realistic-looking objects. It emphasises the mathematics behind computer graphics, most of which is included in an appendix. The main topics covered are: scan conversion methods; selecting the best pixels for generating lines, circles and other objects; geometric transformations and projections; translations, rotations, moving in 3D, perspective projections, curves and surfaces; construction, wire-frames, rendering, normals; CRTs, antialiasing, animation, colour, perception, polygons, compression. With its numerous illustrative examples and exercises, the book is ideal for a two-semester course for advanced undergraduates or graduates, while also making a fine reference for professionals in the field.
Download or read book An Integrated Introduction to Computer Graphics and Geometric Modeling written by Ronald Goldman and published by CRC Press. This book was released on 2009-07-14 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Taking a novel, more appealing approach than current texts, An Integrated Introduction to Computer Graphics and Geometric Modeling focuses on graphics, modeling, and mathematical methods, including ray tracing, polygon shading, radiosity, fractals, freeform curves and surfaces, vector methods, and transformation techniques. The author begins with f
Download or read book Computer graphics and geometric modelling using Beta splines written by Brian A. Barsky and published by . This book was released on 1987 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geometric Continuity of Curves and Surfaces written by Przemysław Kiciak and published by Morgan & Claypool Publishers. This book was released on 2016-10-02 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written for students, CAD system users and software developers who are interested in geometric continuity—a notion needed in everyday practice of Computer-Aided Design and also a hot subject of research. It contains a description of the classical geometric spline curves and a solid theoretical basis for various constructions of smooth surfaces. Textbooks on computer graphics usually cover the most basic and necessary information about spline curves and surfaces in order to explain simple algorithms. In textbooks on geometric design, one can find more details, more algorithms and more theory. This book teaches how various parts of the theory can be gathered together and turned into constructions of smooth curves and smooth surfaces of arbitrary topology. The mathematical background needed to understand this book is similar to what is necessary to read other textbooks on geometric design; most of it is basic linear algebra and analysis. More advanced mathematical material is introduced using elementary explanations. Reading Geometric Continuity of Curves and Surfaces provides an excellent opportunity to recall and exercise necessary mathematical notions and it may be your next step towards better practice and higher understanding of design principles.
Download or read book Blossoming Development of Splines written by Stephen Mann and published by Springer Nature. This book was released on 2022-05-31 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this lecture, we study Bézier and B-spline curves and surfaces, mathematical representations for free-form curves and surfaces that are common in CAD systems and are used to design aircraft and automobiles, as well as in modeling packages used by the computer animation industry. Bézier/B-splines represent polynomials and piecewise polynomials in a geometric manner using sets of control points that define the shape of the surface. The primary analysis tool used in this lecture is blossoming, which gives an elegant labeling of the control points that allows us to analyze their properties geometrically. Blossoming is used to explore both Bézier and B-spline curves, and in particular to investigate continuity properties, change of basis algorithms, forward differencing, B-spline knot multiplicity, and knot insertion algorithms. We also look at triangle diagrams (which are closely related to blossoming), direct manipulation of B-spline curves, NURBS curves, and triangular and tensor product surfaces.
