Download or read book An Introduction to Selection of Coatings and Paints for Professional Engineers written by and published by Guyer Partners. This book was released on 2022-08-28 with total page 39 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for professional engineers and construction managers interested in coatings and paints. Here is what is discussed: 1. INTRODUCTION, 2. PAINTING NEW CONSTRUCTION, 3. FUEL STORAGE TANKS, 4. STEEL WATER TANKS, 5. OTHER STEEL TANKS, 6. STEEL DISTRIBUTION LINES, 7. COMMUNICATION TOWERS AND OTHER TALL STRUCTURES, 8. WATERFRONT STRUCTURES, 9. HYDRAULIC STRUCTURES AND APPURTENANT WORKS, 10. FACTORY FINISHED METAL SIDING, 11. CHAIN LINK FENCES, 12. HOT STEEL SURFACES, 13. CONCRETE FUEL TANKS, 14. CONCRETE SWIMMING POOLS, 15. CONCRETE CATCHMENT BASINS, 16. CHEMICALLY RESISTANT FINISHES FOR CONCRETE FLOORS, 17. SLIP-RESISTANT FLOORS, 18. FOULING-RESISTANT COATINGS, 19. MILDEW-RESISTANT COATINGS, 20. PAVEMENT MARKINGS, 21. WOODEN FLOORS.

Download or read book An Introduction to Coatings and Paints for Professional Engineers written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2021-09-26 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for professional engineers, architects and construction managers interested in paints and coatings for buildings and infrastructure. Here is what is discussed: 1. SELECTION OF COATINGS 1.1 SELECTION CRITERIA 1.2 SPECIFICATIONS FOR LEAD- AND CHROMATE-FREE COATINGS WITH VOC LIMITS 1.3 RECOMMENDATIONS FOR DIFFERENT SUBSTRATES 2. SURFACE PREPARATION 2.1 INTRODUCTION 2.2 REPAIR OF SURFACES 2.3 RECOMMENDATIONS BY SUBSTRATE 2.4 STANDARDS FOR CONDITION OF SUBSTRATES 2.5 STANDARDS FOR CLEANLINESS OF SUBSTRATES 2.6 RECOMMENDATIONS FOR PAINT REMOVAL 2.7 METHODS OF SURFACE PREPARATION.

Download or read book n Introduction to Coatings and Paints for Professional Engineers written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2022-02-25 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for professional engineers, architects and construction managers interested in coatings and paints for buildings and other infrastructures. Here is what is discussed: 1. SELECTION OF COATINGS, 1.1 SELECTION CRITERIA, 1.2 SPECIFICATIONS FOR LEAD- AND CHROMATE-FREE COATINGS WITH VOC LIMITS, 1.3 RECOMMENDATIONS FOR DIFFERENT SUBSTRATES, 2. SURFACE PREPARATION, 2.1 INTRODUCTION, 2.2 REPAIR OF SURFACES, 2.3 RECOMMENDATIONS BY SUBSTRATE, 2.4 STANDARDS FOR CONDITION OF SUBSTRATES, 2.5 STANDARDS FOR CLEANLINESS OF SUBSTRATES, 2.6 RECOMMENDATIONS FOR PAINT REMOVAL, 2.7 METHODS OF SURFACE PREPARATION.

Download or read book An Introduction to Coatings and Paints for Professional Engineers written by J Paul Guyer and published by Independently Published. This book was released on 2021-09-26 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for professional engineers, architects and construction managers interested in paints and coatings for buildings and infrastructure. Here is what is discussed: 1. SELECTION OF COATINGS 1.1 SELECTION CRITERIA 1.2 SPECIFICATIONS FOR LEAD- AND CHROMATE-FREE COATINGS WITH VOC LIMITS 1.3 RECOMMENDATIONS FOR DIFFERENT SUBSTRATES 2. SURFACE PREPARATION 2.1 INTRODUCTION 2.2 REPAIR OF SURFACES 2.3 RECOMMENDATIONS BY SUBSTRATE 2.4 STANDARDS FOR CONDITION OF SUBSTRATES 2.5 STANDARDS FOR CLEANLINESS OF SUBSTRATES 2.6 RECOMMENDATIONS FOR PAINT REMOVAL 2.7 METHODS OF SURFACE PREPARATION.

Download or read book An Introduction to Surface Preparation for Coatings and Paints for Professional Engineers written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2021-12-31 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for professional engineers, architects and construction managers interested in surface preparation for coatings and paints. Here is what is discussed: 1. INTRODUCTION, 2. REPAIR OF SURFACES, 3. RECOMMENDATIONS BY SUBSTRATE, 4. STANDARDS FOR CONDITION OF SUBSTRATES, 5. STANDARDS FOR CLEANLINESS OF SUBSTRATES, 6. RECOMMENDATIONS FOR PAINT REMOVAL, 7. METHODS OF SURFACE PREPARATION.

Download or read book An Introduction to Selection of Coatings and Paints for Professional Engineers written by J Paul Guyer and published by Independently Published. This book was released on 2022-08-29 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for professional engineers and construction managers interested in coatings and paints. Here is what is discussed: 1. INTRODUCTION, 2. PAINTING NEW CONSTRUCTION, 3. FUEL STORAGE TANKS, 4. STEEL WATER TANKS, 5. OTHER STEEL TANKS, 6. STEEL DISTRIBUTION LINES, 7. COMMUNICATION TOWERS AND OTHER TALL STRUCTURES, 8. WATERFRONT STRUCTURES, 9. HYDRAULIC STRUCTURES AND APPURTENANT WORKS, 10. FACTORY FINISHED METAL SIDING, 11. CHAIN LINK FENCES, 12. HOT STEEL SURFACES, 13. CONCRETE FUEL TANKS, 14. CONCRETE SWIMMING POOLS, 15. CONCRETE CATCHMENT BASINS, 16. CHEMICALLY RESISTANT FINISHES FOR CONCRETE FLOORS, 17. SLIP-RESISTANT FLOORS, 18. FOULING-RESISTANT COATINGS, 19. MILDEW-RESISTANT COATINGS, 20. PAVEMENT MARKINGS, 21. WOODEN FLOORS.

Download or read book An Introduction to Surface Preparation for Coatings and Paints written by J. Paul Guyer and published by Independently Published. This book was released on 2018-07-21 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides introductory technical guidance to civil engineers and other professional engineers, architects, construction managers and maintenance personnel on surface preparation methods for paints and coatings. Here is what is discussed: 1. INTRODUCTION, 2. REPAIR OF SURFACES, 3. RECOMMENDATIONS BY SUBSTRATE, 4. STANDARDS FOR CONDITION OF SUBSTRATES, 5. STANDARDS FOR CLEANLINESS OF SUBSTRATES, 6. RECOMMENDATIONS FOR PAINT REMOVAL, 7. METHODS OF SURFACE PREPARATION.

Download or read book An Introduction to Surface Preparation for Coatings and Paints written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2018-01-31 with total page 43 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for professional engineers, architects and construction managers interested in surface preparation for paints and coatings. Here is what is discussed: 1. INTRODUCTION 2. REPAIR OF SURFACES 3. RECOMMENDATIONS BY SUBSTRATE 4. STANDARDS FOR CONDITION OF SUBSTRATES 5. STANDARDS FOR CLEANLINESS OF SUBSTRATES 6. RECOMMENDATIONS FOR PAINT REMOVAL 7. METHODS OF SURFACE PREPARATION.

Download or read book An Introduction to Coatings and Paints written by J. Paul Guyer and published by Createspace Independent Pub. This book was released on 2013-05-31 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: Painting and coating of surfaces in buildings and other infrastructure construction require careful attention to specification, application and inspection if construction materials are to be effectively protected for a substantial service life. This course will introduce you to the principles and practices of coatings and paints for applications in buildings and other infrastructure. You will learn about the criteria to use in specifying coatings and paints for all of the typical construction materials, specifications for repair of surfaces, recommendations for removal of existing coatings and paints, standards for condition and cleanliness of substrates, and methods of surface preparation. This course will provide you with important information you can use every day on current and future projects in your office or agency.

Download or read book An Introduction to Surface Preparation for Coatings and Paints written by J. Paul Guyer and published by Createspace Independent Publishing Platform. This book was released on 2017-02-25 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides introductory technical guidance to civil engineers and other professional engineers, architects, construction managers and maintenance personnel on surface preparation methods for paints and coatings. Here is what is discussed: 1. INTRODUCTION, 2. REPAIR OF SURFACES, 3. RECOMMENDATIONS BY SUBSTRATE, 4. STANDARDS FOR CONDITION OF SUBSTRATES, 5. STANDARDS FOR CLEANLINESS OF SUBSTRATES, 6. RECOMMENDATIONS FOR PAINT REMOVAL, 7. METHODS OF SURFACE PREPARATION.

Download or read book An Introduction to Paint and Protective Coatings written by J. Paul Guyer and published by Independently Published. This book was released on 2018-04-23 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides introductory technical guidance for professional engineers, construction managers and facility operators interested in selection, application and inspection of paints and protective coatings. Here is what is discussed: 1. OVERVIEW, 2. SELECTION, 3. SURFACE PREPARATION, 4. APPLICATION, 5. INSPECTION, 6. ANALYSIS OF FAILURES.

Download or read book An Introduction to Paint and Protective Coatings written by J. Paul Guyer and published by Createspace Independent Publishing Platform. This book was released on 2017-04-29 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides introductory technical guidance for professional engineers, construction managers and facility operators interested in selection, application and inspection of paints and protective coatings. Here is what is discussed: 1. OVERVIEW, 2. SELECTION, 3. SURFACE PREPARATION, 4. APPLICATION, 5. INSPECTION, 6. ANALYSIS OF FAILURES.

Download or read book An Introduction to Selection of Coating Systems for Buildings and Infrastructure written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2018-01-20 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technical guidance for professional engineers, architects and facility managers interested in selection of coatings and paint for buildings and infrastructure. Here is what is discussed: 1. INTRODUCTION 2. PAINTING NEW CONSTRUCTION 3. FUEL STORAGE TANKS 4. STEEL WATER TANKS 5. OTHER STEEL TANKS 6. STEEL DISTRIBUTION LINES 7. COMMUNICATION TOWERS AND OTHER TALL STRUCTURES 8. WATERFRONT STRUCTURES 9. HYDRAULIC STRUCTURES AND APPURTENANT WORKS 10. FACTORY FINISHED METAL SIDING 11. CHAIN LINK FENCES 12. HOT STEEL SURFACES 13. CONCRETE FUEL TANKS 14. CONCRETE SWIMMING POOLS 15. CONCRETE CATCHMENT BASINS 16. CHEMICALLY RESISTANT FINISHES FOR CONCRETE FLOORS 17. SLIP-RESISTANT FLOORS 18. FOULING-RESISTANT COATINGS 19. MILDEW-RESISTANT COATINGS 20. PAVEMENT MARKINGS 21. WOODEN FLOORS.

Download or read book An Introduction to Paint and Protective Coatings written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2017-12-31 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for professional engineers, architects, construction managers and facility managers interested in paint and protective coatings. Here is what is discussed: 1. OVERVIEW 2. SELECTION 3. SURFACE PREPARATION 4. APPLICATION 5. INSPECTION 6. ANALYSIS OF FAILURES.

Download or read book An Introduction to Selection of Coating Systems for Buildings and Infrastructure written by J. Paul Guyer and published by Createspace Independent Publishing Platform. This book was released on 2017-02-26 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides introductory technical guidance for civil engineers, architectural engineers and other professional engineers, architects, construction managers and maintenance managers interested in coating selection for buildings and infrastructure. Here is what is discussed: 1. INTRODUCTION, 2. PAINTING NEW CONSTRUCTION, 3. FUEL STORAGE TANKS, 4. STEEL WATER TANKS, 5. OTHER STEEL TANKS, 6. STEEL DISTRIBUTION LINES, 7. COMMUNICATION TOWERS AND OTHER TALL STRUCTURES, 8. WATERFRONT STRUCTURES, 9. HYDRAULIC STRUCTURES AND APPURTENANT WORKS, 10. FACTORY FINISHED METAL SIDING, 11. CHAIN LINK FENCES, 12. HOT STEEL SURFACES, 13. CONCRETE FUEL TANKS, 14. CONCRETE SWIMMING POOLS, 15. CONCRETE CATCHMENT BASINS, 16. CHEMICALLY RESISTANT FINISHES FOR CONCRETE FLOORS, 17. SLIP-RESISTANT FLOORS, 18. FOULING-RESISTANT COATINGS, 19. MILDEW-RESISTANT COATINGS, 20. PAVEMENT MARKINGS, 21. WOODEN FLOORS.

Download or read book An Introduction to Selection of Coating Systems for Buildings and Infrastructure written by J. Paul Guyer and published by Independently Published. This book was released on 2018-08-04 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication provides introductory technical guidance for civil engineers, architectural engineers and other professional engineers, architects, construction managers and maintenance managers interested in coating selection for buildings and infrastructure. Here is what is discussed: 1. INTRODUCTION, 2. PAINTING NEW CONSTRUCTION, 3. FUEL STORAGE TANKS, 4. STEEL WATER TANKS, 5. OTHER STEEL TANKS, 6. STEEL DISTRIBUTION LINES, 7. COMMUNICATION TOWERS AND OTHER TALL STRUCTURES, 8. WATERFRONT STRUCTURES, 9. HYDRAULIC STRUCTURES AND APPURTENANT WORKS, 10. FACTORY FINISHED METAL SIDING, 11. CHAIN LINK FENCES, 12. HOT STEEL SURFACES, 13. CONCRETE FUEL TANKS, 14. CONCRETE SWIMMING POOLS, 15. CONCRETE CATCHMENT BASINS, 16. CHEMICALLY RESISTANT FINISHES FOR CONCRETE FLOORS, 17. SLIP-RESISTANT FLOORS, 18. FOULING-RESISTANT COATINGS, 19. MILDEW-RESISTANT COATINGS, 20. PAVEMENT MARKINGS, 21. WOODEN FLOORS.

Download or read book An Introduction to Selection and Surface Preparation of Thermal Spray Coatings written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil and mechanical engineers and construction managers interested in selection of and surface preparation for application of thermal spray coatings for corrosion protection and other purposes. Here is what is discussed: 1. INTRODUCTION 2. SERVICE ENVIRONMENTS 3. OTHER CONSIDERATIONS IN COATING SELECTION 4. THERMAL SPRAY SELECTION FOR FERROUS METAL SURFACES IN FRESH WATER 5. THERMAL SPRAY SELECTION FOR FERROUS METAL SURFACES IN SEAWATER 6. THERMAL SPRAY SELECTION FOR FERROUS METAL SURFACES 7. THERMAL SPRAY SELECTION FOR FERROUS METAL SURFACES EXPOSED TO HIGH TEMPERATURES 8. THERMAL SPRAY SELECTION FOR ZEBRA MUSSEL PROTECTION 9. THERMAL SPRAY COATINGS FOR CATHODIC PROTECTION OF REINFORCING STEEL IN CONCRETE 10. THERMAL SPRAY NONSKID COATINGS 11. THERMAL SPRAY COATINGS FOR CAVITATION/EROSION PROTECTION 12. THERMAL SPRAY COATINGS FOR PARTIALLY SUBMERGED STRUCTURES 13. SURFACE PREPARATION.