Download or read book An Introduction to Reinforcement Strength and Serviceability Requirements for Reinforced Concrete Hydraulic Structures written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2017-12-14 with total page 35 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil and structural engineers and construction managers interested in design and construction of reinforced concrete hydraulic structures. Here is what is discussed: 1. DETAILS OF REINFORCEMENT 2. STRENGTH AND SERVICEABILITY REQUIREMENTS 3. REQUIRED STRENGTH.
Download or read book An Introduction to Strength and Serviceability Requirements for Reinforced Concrete Hydraulic Structures written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2018-01-27 with total page 35 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory guidance for civil and structural engineers interested in strength and serviceability requirements for reinforced concrete hydraulic structures. Here is what is discussed: 1. GENERAL 2. SERVICEABILITY LIMIT STATES 3. STRENGTH LIMIT STATES. 4. STRUCTURAL STABILITY ANALYSIS 5. CRITICAL AND NORMAL STRUCTURES 6. HYDRAULIC STRUCTURES SUPPORTING VEHICLES 7. LOADS.
Download or read book Strength Design for Reinforced concrete Hydraulic Structures written by American Society of Civil Engineers and published by . This book was released on 1993 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: Strength Design for Reinforced-Concrete Hydraulic Structures is written in sufficient detail to not only provide the designer with design procedures, but also to present examples of their application. A review of general detailing requirements, as well as strength and serviceability requirements, create a strong understanding of the strength-design method. Latter chapters feature examples that demonstrate load-factor application, the design of members subjected to combined flexural and axial loads, the design of members subjected to biaxial bending, and the design for shear strength, including provisions for both special straight and curved members.
Download or read book Reinforced Concrete Structures Analysis and Design written by David D. E. E. Fanella and published by McGraw Hill Professional. This book was released on 2010-12-06 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: A PRACTICAL GUIDE TO REINFORCED CONCRETE STRUCTURE ANALYSIS AND DESIGN Reinforced Concrete Structures explains the underlying principles of reinforced concrete design and covers the analysis, design, and detailing requirements in the 2008 American Concrete Institute (ACI) Building Code Requirements for Structural Concrete and Commentary and the 2009 International Code Council (ICC) International Building Code (IBC). This authoritative resource discusses reinforced concrete members and provides techniques for sizing the cross section, calculating the required amount of reinforcement, and detailing the reinforcement. Design procedures and flowcharts guide you through code requirements, and worked-out examples demonstrate the proper application of the design provisions. COVERAGE INCLUDES: Mechanics of reinforced concrete Material properties of concrete and reinforcing steel Considerations for analysis and design of reinforced concrete structures Requirements for strength and serviceability Principles of the strength design method Design and detailing requirements for beams, one-way slabs, two-way slabs, columns, walls, and foundations
Download or read book An Introduction to Concrete Construction written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2017-12-21 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil and structural engineers and construction managers interested in concrete construction for buildings and infrastructure. Here is what is discussed: 1. CONSTRUCTION PLANNING 2. CONSTRUCTION METHODS 3. MATERIALS SELECTION 4. MIXTURE PROPORTIONING 5. ARCHITECTURAL CONCRETE 6. SHOTCRETE 7. VERIFICATION AND TESTING 8. CONCRETE PAVEMENTS 9. SLABS ON GRADE 10. SPECIAL CONCRETES 11. ALKALI/SILICATE AGGREGATE REACTIONS 12. EVALUATION OF CONCRETE STRUCTURES 13. CONCRETE STRUCTURES REPAIR 14. REINFORCED CONCRETE HYDRAULIC STRUCTURES.
Download or read book Engineering and Design written by Us Army Corps Of Engineers and published by Military Bookshop. This book was released on 1995-06 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual provides guidance on evaluating the condition of the concrete in a structure, relating the condition of the concrete to the underlying cause or causes of that condition, selecting an appropriate repair material and method for any deficiency found, and using the selected materials and methods to repair or rehabilitate the structure. Guidance is also included on maintenance of concrete and on preparation of concrete investigation reports for repair and rehabilitation projects. Considerations for certain specialized types of rehabilitation projects are also given.
Download or read book Engineering and Design written by United States. Army. Corps of Engineers and published by . This book was released on 1992 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual provides guidance for designing reinforced concrete hydraulic structures by the strength-design method. Plain concrete and prestressed concrete are not covered in this manual.
Download or read book An Introduction to Engineering Concrete Structures written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2021-07-12 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil engineers, structural engineers and construction managers interested in engineering design and construction of concrete structures. Here is what is discussed: 1. CONSTRUCTION PLANNING 2. CONSTRUCTION METHODS 3. MATERIALS SELECTION 4. MIXTURE PROPORTIONING 5. ARCHITECTURAL CONCRETE 6. SHOTCRETE 7. VERIFICATION AND TESTING 8. CONCRETE PAVEMENTS 9. SLABS ON GRADE 10. SPECIAL CONCRETES 11. ALKALI/SILICATE AGGREGATE REACTIONS 12. EVALUATION OF CONCRETE STRUCTURES 13. CONCRETE STRUCTURES REPAIR 14. REINFORCED CONCRETE HYDRAULIC STRUCTURES
Download or read book SMART Technologies for Natural Resource Conservation and Sustainable Development written by Nilanjan Sengupta and published by Allied Publishers. This book was released on 2016-12-05 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is a conference proceeding on adoption and application of sustainable, Manageable, Appropriate, Rational and Transferable (SMART) Technologies in all sectors of development.
Download or read book Fibre reinforced concrete From design to structural applications written by FIB - Féd. Int. du Béton and published by FIB - Féd. Int. du Béton. This book was released on 2016 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The FRC-2014 Workshop Fibre Reinforced Concrete: from Design to Structural Applications was the first ACI-fib joint technical event. The Workshop, held at Polytechnique Montreal (Canada) on July 24th and 25th 2014, was attended by 116 participants from 25 countries and 4 continents. The first international FRC workshop was held in Bergamo (Italy) in 2004. At that time, the lack of specific building codes and standards was identified as the main inhibitor to the application of this technology in engineering practice. Ten years after Bergamo, many of the objectives identified at that time have been achieved. The use of fibre reinforced concrete (FRC) for designing structural members in bending and shear has recently been addressed in the fib Model Code 2010. Steel fibre reinforced concrete (SFRC) has also been used structurally in several building and bridge projects in Europe and North-America. SFRC has been widely used in segmental tunnel linings all over the world. Members of ACI544 and fib TG-4.1 have been involved in writing code based specifications for the design of FRC structural members. More than fifty papers were presented at the Workshop from which forty-four were selected for this joint ACI/fib publication. The papers are organised in the document under six themes: Design guidelines and specifications, Material properties for design, Behaviour and design of beams and columns, Behaviour and design of slabs and other structures, Behaviour and design of foundations and underground components, and finally, Applications in structure and underground construction projects.
Download or read book High Strength Concrete written by Michael A. Caldarone and published by CRC Press. This book was released on 2014-04-21 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical book from a highly experienced author presents clearly the means and methods for designing, producing and using high-strength concrete. High-strength concrete offers many benefits. Higher compressive strengths allow for a reduction in the cross-sectional dimensions of columns and walls in buildings. Its greater stiffness allows for increasing building heights while controlling sway and occupant comfort. Civil structures such as bridges have benefited from greater span lengths, shallower beam sections, wider girder spacing, and extended service life. Illustrated with real life examples, through documented case histories, High-Strength Concrete will be a valuable resource for contractors, producers, inspection agencies, as well as engineers and researchers.
Download or read book Developments in Mechanics of Structures and Materials written by Andrew J. Deeks and published by Taylor & Francis Group. This book was released on 2005 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metaheuristic Approaches for Optimum Design of Reinforced Concrete Structures Emerging Research and Opportunities written by Kayabekir, Aylin Ece and published by IGI Global. This book was released on 2020-03-20 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reinforced concrete structures are one of the major structural types and must adhere to design regulation codes. It is ideal to find the best design (section dimension, material type, and amount of reinforcement) with the minimum cost providing the design constraints (design formulation considering loading of structure). Metaheuristic methods inspired by natural phenomena can consider design constraints by combining the analyses of formulation of reinforced concrete structures with an iterative numerical algorithm using several convergence options of random generation of candidate design solutions. Metaheuristic Approaches for Optimum Design of Reinforced Concrete Structures: Emerging Research and Opportunities is a pivotal reference source that focuses on several metaheuristic algorithms and the design of several types of structural members. Additionally, retrofit applications and seismic design issues are considered for readers in earthquake zones. Highlighting a wide range of topics including algorithms, design variables, and retrofit design, this book is ideally designed for architects, engineers, urban designers, government officials, policymakers, researchers, academicians, and students.
Download or read book An Introduction to Pile Capacities for Foundations written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2018-07-05 with total page 33 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil, geotechnical and structural engineers interested in piles for foundations of structures. Here is what is discussed: 1. GENERAL 2. DESIGN CRITERIA 3. PILE CAPACITY.
Download or read book Structural Use of Concrete written by British Standards Institution and published by . This book was released on 1997 with total page 163 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concretes, Construction materials, Buildings, Structures, Structural design, Loading, Reinforced concrete, Strength of materials, Framed structures, Beams, Slabs, Structural members, Shear stress, Columns, Walls, Stability, Stairs, Foundations, Reinforcement, Prestressed concrete, Precast concrete, Composite construction, Composition, Durability, Concrete mixes, Curing (concrete), Formwork, Finishes, Movement joints, Grouting
Download or read book Design of Prestressed Concrete to Eurocode 2 Second Edition written by Raymond Ian Gilbert and published by CRC Press. This book was released on 2017-01-27 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of structures in general, and prestressed concrete structures in particular, requires considerably more information than is contained in building codes. A sound understanding of structural behaviour at all stages of loading is essential. This textbook presents a detailed description and explanation of the behaviour of prestressed concrete members and structures both at service loads and at ultimate loads and, in doing so, provide a comprehensive and up-to-date guide to structural design. Much of the text is based on first principles and relies only on the principles of mechanics and the properties of concrete and steel, with numerous worked examples. However, where the design requirements are code specific, this book refers to the provisions of Eurocode 2: Design of Concrete Structures and, where possible, the notation is the same as in Eurocode 2. A parallel volume is written to the Australian Standard for Concrete Structures AS3600-2009. The text runs from an introduction to the fundamentals to in-depth treatments of more advanced topics in modern prestressed concrete structures. It suits senior undergraduate and graduate students and also practising engineers who want comprehensive introduction to the design of prestressed concrete structures. It retains the clear and concise explanations and the easy-to-read style of the first edition, but the content has been extensively re-organised and considerably expanded and updated. New chapters cover design procedures, actions and loads; prestressing systems and construction requirements; connections and detailing; and design concepts for prestressed concrete bridges. The topic of serviceability is developed extensively throughout. All the authors have been researching and teaching the behaviour and design of prestressed concrete structures for over thirty-five years and the proposed new edition of the book reflects this wealth of experience. The work has also gained much from Professor Gilbert active and long-time involvement in the development of standards for concrete buildings and concrete bridges.
Download or read book Design of Reinforced Concrete written by Jack C. McCormac and published by . This book was released on 2005 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description
