Download or read book An Introduction to Packet Microwave Systems and Technologies written by Paolo Volpato and published by Artech House. This book was released on 2016-12-31 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a thorough introduction to packet microwave systems and technologies, this unique book focuses on the architecture of microwave networks and the applications of packet microwaves, particularly in mobile backhaul. IP and data technologies which are the key differentiator of packet microwave systems are explored. Microwave applications and packet microwave, including radio equipment chain, full-indoor and outdoor applications, and operational aspects are presented along with packet microwave in hybrid applications and packet technologies for capacity scale. The structure of packet microwave network and mobile backhaul along with a glance at the evolution of packet microwave are discussed. Readers find support for end-to-end design of transmission services in this book.
Download or read book An Introduction to Packet Microwave Systems and Technologies written by Paolo Volpato and published by . This book was released on 2015-05-29 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Packet microwave systems were introduced to bring the all-IP paradigm into the microwave transmission domain. The approach taken by this book is to define a "reference" packet microwave system, highlighting the main functional and technical characteristics. In the first part the characteristics that are foundational to a packet microwave are compared to hybrid systems. The interworking function and the data awareness function are analyzed and the architecture of a packet microwave is also discussed. The second part deals with the benefits of packet microwave systems in scalability, operational flexibility, and networking. Capacity mechanisms (adaptive modulation, packet compression methods and radio-LAG algorithms) are analyzed and the microwave applications (split-mount, full-outdoor and IP-enabled) discussed. Examples of how packet microwave systems are employed in LTE mobile backhaul networks are shown. The role of layer 2 (Carrier Ethernet) and layer 3 (IP/MPLS) microwave is discussed. The final part looks at the evolution of packet microwave technologies. The role of SDN, SON, energy efficiency, millimeter-wave technologies, increased spectrum efficiency (H-QAM) is discussed.
Download or read book Frequency Measurement Technology written by Ignacio Llamas-Garro and published by Artech House. This book was released on 2017-12-31 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique first-of-its-kind resource provides practical coverage of the design and implementation of frequency measurement receivers, which aid in identifying unknown signals. The technologies used in frequency measurement interferometry-based on-delay lines and filters are explored in this book. Practitioners also find concrete examples of microwave photonics implementations. The designs and concepts that cover conventional photonic instantaneous frequency measurement (IFM) circuits are explained. This book provides details on new designs for microwave photonic circuits and reconfigurable frequency measurement (RFM) circuits using diodes and MicroElectroMechanical Systems (MEMS). This book explains the many diverse applications of frequency measurement that are used in defense, radar, and communications. The instrumentation used to perform frequency measurements is explained, including the use of block analysis for network and spectrum analyzers and calibration techniques. Readers learn the advantages of using frequency measurement based on microwave/RF techniques, including immunity to electromagnetic interference, low loss, compatibility with fiber signal distribution, and parallel processing signals. Moreover, readers gain insight into the future of frequency measurement receivers. The book examines both the underpinnings and the implementation of frequency measurement receivers using many diverse technological platforms.
Download or read book Nonlinear Design FETs and HEMTs written by Peter H. Ladbrooke and published by Artech House. This book was released on 2021-11-30 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite its continuing popularity, the so-called standard circuit model of compound semiconductor field-effect transistors (FETs) and high electron mobility transistors (HEMTs) is shown to have a limitation for nonlinear analysis and design: it is valid only in the static limit. When the voltages and currents are time-varying, as they must be for these devices to have any practical use, the model progressively fails for higher specification circuits. This book shows how to reform the standard model to render it fully compliant with the way FETs and HEMTs actually function, thus rendering it valid dynamically. Proof-of-principle is demonstrated for several practical circuits, including a frequency doubler and amplifiers with demanding performance criteria. Methods for extracting both the reformulated model and the standard model are described, including a scheme for re-constructing from S-parameters the bias-dependent dynamic (or RF) I(V) characteristics along which devices work in real-world applications, and as needed for the design of nonlinear circuits using harmonic-balance and time-domain simulators. The book includes a historical review of how variations on the standard model theme evolved, leading up to one of the most widely used—the Angelov (or Chalmers) model.
Download or read book Millimeter Wave GaN Power Amplifier Design written by Edmar Camargo and published by Artech House. This book was released on 2022-05-31 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives you – in one comprehensive and practical resource -- everything you need to successfully design modern and sophisticated power amplifiers at mmWave frequencies. The book provides an in-depth treatment of the design methodology for MMIC power amplifiers, then brings you step by step through the various phases of design, from the selection of technology and preliminary architecture considerations, to the effective design of the matching circuits and conversion of electrical-to-electromagnetic models. Detailed figures and numerous practical applications are included to help you gain valuable insights into these technologies and learn to identify the best path to a successful design. You’ll be guided through a range of new mmWave power applications that show particular promise to support new 5G systems, while mastering the use of GaN technology that continues to dominate the power mmWave applications due to its high power, gain, and efficiency. This is a valuable resource for power amplifier design engineers, technicians, industry R&D staff, and anyone getting into the area of power MMICs who wants to learn how to design at mmWave frequencies.
Download or read book Wideband Microwave Materials Characterization written by John W. Schultz and published by Artech House. This book was released on 2023-02-28 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a practical engineering guide to microwave material measurements for both laboratory and manufacturing/field environments, including nondestructive inspection (NDI) and nondestructive evaluation (NDE). The book covers proven methods for characterizing materials at microwave frequencies, including both resonant and wide-bandwidth techniques, and gives you the necessary theory and equations for implementing these methods. You’ll understand how to invert dielectric and/or magnetic material properties from free space transmission and reflection, and how to measure traveling wave attenuation. You’ll also know how to measure dielectric and/or magnetic material properties from transmission line fixtures, and learn how to use computational electromagnetic modeling with a measurement fixture. The book shows you how to build and use microwave NDE equipment for radomes and/or structural dielectric materials. This is an excellent resource for Engineers/scientists conducting or analyzing RF/Microwave/MMW material measurements for applications in electromagnetic materials, as well as those who are developing or applying microwave non-destructive evaluation (NDE) methods to their manufacturing problems.
Download or read book Microwave Power Amplifier Design with MMIC Modules written by Howard Hausman and published by Artech House. This book was released on 2018-06-30 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid state power amplifiers (SSPA) are a critical part of many microwave systems. Designing SSPAs with monolithic microwave integrated circuits (MMIC) has boosted device performance to much higher levels focused on PA modules. This cutting-edge book offers engineers practical guidance in selecting the best power amplifier module for a particular application and interfacing the selected module with other power amplifier modules in the system. It also explains how to identify and mitigate peripheral issues concerning the PA modules, SSPAs, and microwave systems. This authoritative volume presents the critical techniques and underpinnings of SSPA design, enabling professionals to optimize device and system performance. Engineers gain the knowledge they need to evaluate the optimum topologies for the design of a chain of microwave devices, including power amplifiers. Additionally, the book addresses the interface between the microwave subsystems and the primary DC power, the control and monitoring circuits, and the thermal and EMI paths. Packed with 240 illustrations and over 430 equations, this detailed book provides the practical tools engineers need for their challenging projects in the field.
Download or read book Microwave and Millimeter Wave Vacuum Electron Devices Inductive Output Tubes Klystrons Traveling Wave Tubes Magnetrons Crossed Field Amplifiers and Gyrotrons written by A.S. Gilmour, Jr. and published by Artech House. This book was released on 2020-04-30 with total page 880 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an internationally recognized as an expert on the subject of microwave (MW) tubes, this book presents and describes the many types of microwave tubes, and despite competition from solid-state devices (those using GaN, SiC, et cetera), which continue to be used widely and find new applications in defense, communications, medical, and industrial drying. Helix traveling wave tubes (TWTs), as well as coupled cavity TWTs are covered. Klystrons, and how they work, are described, along with the physics behind it and examples of devices and their uses. Vacuum electron devices are explained in detail and examines the harsh environment that must exist in tubes if they are to operate properly. The secondary emission process and its role in the operation of crossed-field devices is also discussed. The design of collectors for linear-beam tubes, including power dissipation and power recovery, are explored. Discussions of important noise sources and techniques that can be used to minimize their effects are also included. Presented in full color, this book contains a balance of practical and theoretical material so that those new to microwave tubes as well as experienced microwave tube technicians, engineers, and managers can benefit from its use.
Download or read book Parameter Extraction and Complex Nonlinear Transistor Models written by Gunter Kompa and published by Artech House. This book was released on 2019-12-31 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: All model parameters are fundamentally coupled together, so that directly measured individual parameters, although widely used and accepted, may initially only serve as good estimates. This comprehensive resource presents all aspects concerning the modeling of semiconductor field-effect device parameters based on gallium-arsenide (GaAs) and gallium nitride (GaN) technology. Metal-semiconductor field-effect transistors (MESFETs), high electron mobility transistors (HEMTs) and heterojunction bipolar transistors (HBTs), their structures and functions, and existing transistor models are also classified. The Shockley model is presented in order to give insight into semiconductor field-effect transistor (FET) device physics and explain the relationship between geometric and material parameters and device performance. Extraction of trapping and thermal time constants is discussed. A special section is devoted to standard nonlinear FET models applied to large-signal measurements, including static-/pulsed-DC and single-/two-tone stimulation. High power measurement setups for signal waveform measurement, wideband source-/load-pull measurement (including envelope source-/load pull) are also included, along with high-power intermodulation distortion (IMD) measurement setup (including envelope load-pull). Written by a world-renowned expert in the field, this book is the first to cover of all aspects of semiconductor FET device modeling in a single volume.
Download or read book High Speed Circuit Board Signal Integrity Second Edition written by Stephen C. Thierauf and published by Artech House. This book was released on 2017-04-30 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thoroughly updated leading-edge circuit design resource offers the knowledge needed to quickly pinpoint transmission problems that can compromise the entire circuit design. This new edition demonstrates how to apply EM theory to solve signal integrity problems with a practical application-oriented approach. Discussing both design and debug issues at gigabit per second data rates, the book serves as a practical reference for projects involving high-speed serial signaling on printed wiring boards. Step-by-step, this book goes from reviewing the essentials of linear circuit theory, to examining practical issues of pulse propagation along lossless and lossy transmission lines. It provides detailed guidelines for crosstalk, attenuation, power supply decoupling, and layer stackup tradeoffs (including pad/antipad tradeoffs). Other key topics include the construction of etched conductors, analysis of return paths and split planes, microstrip and stripline characteristics, and SMT capacitors. Filled with on-the-job-proven examples, this hands-on reference is the book that engineers can turn to time and again to design out and troubleshoot circuit signal loss and impedance problems.
Download or read book Telecommunications Engineer s Reference Book written by Fraidoon Mazda and published by Butterworth-Heinemann. This book was released on 2014-06-28 with total page 1140 pages. Available in PDF, EPUB and Kindle. Book excerpt: Telecommunications Engineer's Reference Book maintains a balance between developments and established technology in telecommunications. This book consists of four parts. Part 1 introduces mathematical techniques that are required for the analysis of telecommunication systems. The physical environment of telecommunications and basic principles such as the teletraffic theory, electromagnetic waves, optics and vision, ionosphere and troposphere, and signals and noise are described in Part 2. Part 3 covers the political and regulatory environment of the telecommunications industry, telecommunication standards, open system interconnect reference model, multiple access techniques, and network management. The last part deliberates telecommunication applications that includes synchronous digital hierarchy, asynchronous transfer mode, integrated services digital network, switching systems, centrex, and call management. This publication is intended for practicing engineers, and as a supplementary text for undergraduate courses in telecommunications.
Download or read book An Introduction to LTE written by Christopher Cox and published by John Wiley & Sons. This book was released on 2014-05-12 with total page 561 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following on from the successful first edition (March 2012), this book gives a clear explanation of what LTE does and how it works. The content is expressed at a systems level, offering readers the opportunity to grasp the key factors that make LTE the hot topic amongst vendors and operators across the globe. The book assumes no more than a basic knowledge of mobile telecommunication systems, and the reader is not expected to have any previous knowledge of the complex mathematical operations that underpin LTE. This second edition introduces new material for the current state of the industry, such as the new features of LTE in Releases 11 and 12, notably coordinated multipoint transmission and proximity services; the main short- and long-term solutions for LTE voice calls, namely circuit switched fallback and the IP multimedia subsystem; and the evolution and current state of the LTE market. It also extends some of the material from the first edition, such as inter-operation with other technologies such as GSM, UMTS, wireless local area networks and cdma2000; additional features of LTE Advanced, notably heterogeneous networks and traffic offloading; data transport in the evolved packet core; coverage and capacity estimation for LTE; and a more rigorous treatment of modulation, demodulation and OFDMA. The author breaks down the system into logical blocks, by initially introducing the architecture of LTE, explaining the techniques used for radio transmission and reception and the overall operation of the system, and concluding with more specialized topics such as LTE voice calls and the later releases of the specifications. This methodical approach enables readers to move on to tackle the specifications and the more advanced texts with confidence.
Download or read book Agent and Multi Agent Systems Technologies and Applications written by Anne Hakansson and published by Springer Science & Business Media. This book was released on 2009-05-25 with total page 884 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the Third International Symposium on Agent and Multi-Agent Systems: Technologies and Applications, held in Uppsala, Sweden, during June 3-5, 2009. The 86 papers contained in this volume were carefully reviewed and selected from numerous submissions. There are 13 main tracks covering the methodology and applications of agent and multi-agent systems and 8 special sessions on specific topics within the field. The papers are divided in topical sections on social and organizational structures of agents; negotiation protocols; mobile agents and robots; agent design and implementation; e-commerce; simulation systems and game systems; agent systems and ontologies; agents for network systems; communication and agent learning systems; Web services and semantic Web; self-organization in multi-agent systems; management and e-business; mobile and intelligent agents for networks and services; engineering interaction protocols; agent-based simulation, decision making and systems optimization; digital economy; agent-based optimization (ABO2009); distributed systems and artificial intelligence applications.
Download or read book Transmission Systems Design Handbook for Wireless Networks written by Harvey Lehpamer and published by Artech House. This book was released on 2002 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transmission Systems Design for Wireless Applications takes you through the design and deployment of wireless transmission networks. From principles and design, to equipment procurement, project management, testing, and operation, it's a practical, hands-on engineering guide with numerous real-life examples of turn-key operations in the wireless networking industry. This book, written for both technical and non-technical professionals, helps you deal with the costs and difficulties involved in setting up the local access with technologies that are still in the evolutionary stage. Issues involved in the deployment of various transmission technologies, and their impact on the overall wireless network topology are discussed. Strategy and approach to transmission network planning, design and deployment are explored.
Download or read book Lecture Notes in Real Time Intelligent Systems written by Jolanta Mizera-Pietraszko and published by Springer. This book was released on 2017-08-07 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intelligent computing refers greatly to artificial intelligence with the aim at making computer to act as a human. This newly developed area of real-time intelligent computing integrates the aspect of dynamic environments with the human intelligence. This book presents a comprehensive practical and easy to read account which describes current state-of-the art in designing and implementing real-time intelligent computing to robotics, alert systems, IoT, remote access control, multi-agent systems, networking, mobile smart systems, crowd sourcing, broadband systems, cloud computing, streaming data and many other applications areas. The solutions discussed in this book will encourage the researchers and IT professional to put the methods into their practice.
Download or read book Information Technology and Libraries written by and published by . This book was released on 1984 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book System Overview of Cyber Technology in a Digitally Connected Global Society written by Joseph O. Esin and published by AuthorHouse. This book was released on 2017-01-16 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author acknowledges the links between education, technology, network operating systems, data, and information transmission and communications, cybertechnology, culture of education, instruction, and learning. In essence, recognizing the correlation among the education and the world of codified technology, this book will assist in providing a deeper understanding and greater improvement of instructional methods and strategies. In addition, this book will provide a correlation between education and technology as a promising and systematic approach for moving away from or conventional methods of classroom instruction and learning endeavors. The readers, in essence, will see the integration of education and cybertechnology as a pinnacle of educational reform for current and future generations. Furthermore, the contents of this book also help expound the benefits and the broad range of possibilities that technology can offer in education, instruction, and the learning process. The proliferation of the uncertain telegraph and mechanized printing machines changed the quality of human writing. We can also expect the use of a well-synthesized educational technology textbook for instruction and learning to lead to the same startling changes in human society. It is the authors view that the anticipated changes should not assume any deficiency on the part of the professors, instructors, and allied educators. Rather, it should ascertain that educators need to be proficient in the use of technology to manage and deliver instruction in different subject areas, such as computer information technology, network technology, wired and wireless technology, and cyber security threats. The author firmly believes that current and future learners are essentially the conglomeration of unfurnished learner materials that are ready and willing to be furnished by the educational system.