Download or read book An Introduction to Modeling of Transport Processes written by Ashim Datta and published by Cambridge University Press. This book was released on 2010 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: Organised around problem solving, this book introduces the reader to computational simulation, bridging fundamental theory with real-world applications.
Download or read book An Introduction to Modeling of Transport Processes written by Ashim K. Datta and published by . This book was released on 2010 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Organized around problem solving, this book gently introduces the reader to computational simulation of biomedical transport processes, bridging fundamental theory with real-world applications. Using this book the reader will gain a complete foundation to the subject, starting with problem simplification, implementation in software, through to interpretation of results, validation, and optimization"--Provided by publisher.
Download or read book Introduction to Transport Phenomena Modeling written by Gianpaolo Ruocco and published by Springer. This book was released on 2018-02-12 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook offers an introduction to multiple, interdependent transport phenomena as they occur in various fields of physics and technology like transport of momentum, heat, and matter. These phenomena are found in a number of combined processes in the fields of chemical, food, biomedical, and environmental sciences. The book puts a special emphasis on numerical modeling of both purely diffusive mechanisms and macroscopic transport such as fluid dynamics, heat and mass convection. To favor the applicability of the various concepts, they are presented with a simplicity of exposure, and synthesis has been preferred with respect to completeness. The book includes more than 130 graphs and figures, to facilitate the understanding of the various topics. It also presents many modeling examples throughout the text, to control that the learned material is properly understood. There are some typos in the text. You can see the corrections here: http://www.springer.com/cda/content/document/cda_downloaddocument/ErrataCorrige_v0.pdf?SGWID=0-0-45-1679320-p181107156
Download or read book Dynamic Modeling of Transport Process Systems written by C. A. Silebi and published by Elsevier. This book was released on 2012-12-02 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a methodology for the development and computer implementation of dynamic models for transport process systems. Rather than developing the general equations of transport phenomena, it develops the equations required specifically for each new example application. These equations are generally of two types: ordinary differential equations (ODEs) and partial differential equations (PDEs) for which time is an independent variable. The computer-based methodology presented is general purpose and can be applied to most applications requiring the numerical integration of initial-value ODEs/PDEs. A set of approximately two hundred applications of ODEs and PDEs developed by the authors are listed in Appendix 8.
Download or read book Scaling Analysis in Modeling Transport and Reaction Processes written by William B. Krantz and published by John Wiley & Sons. This book was released on 2007-06-04 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is unique as the first effort to expound on the subject of systematic scaling analysis. Not written for a specific discipline, the book targets any reader interested in transport phenomena and reaction processes. The book is logically divided into chapters on the use of systematic scaling analysis in fluid dynamics, heat transfer, mass transfer, and reaction processes. An integrating chapter is included that considers more complex problems involving combined transport phenomena. Each chapter includes several problems that are explained in considerable detail. These are followed by several worked examples for which the general outline for the scaling is given. Each chapter also includes many practice problems. This book is based on recognizing the value of systematic scaling analysis as a pedagogical method for teaching transport and reaction processes and as a research tool for developing and solving models and in designing experiments. Thus, the book can serve as both a textbook and a reference book.
Download or read book Modeling Transport Phenomena in Porous Media with Applications written by Malay K. Das and published by Springer. This book was released on 2017-11-21 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an ensemble of six major chapters, an introduction, and a closure on modeling transport phenomena in porous media with applications. Two of the six chapters explain the underlying theories, whereas the rest focus on new applications. Porous media transport is essentially a multi-scale process. Accordingly, the related theory described in the second and third chapters covers both continuum‐ and meso‐scale phenomena. Examining the continuum formulation imparts rigor to the empirical porous media models, while the mesoscopic model focuses on the physical processes within the pores. Porous media models are discussed in the context of a few important engineering applications. These include biomedical problems, gas hydrate reservoirs, regenerators, and fuel cells. The discussion reveals the strengths and weaknesses of existing models as well as future research directions.
Download or read book Modeling of Microscale Transport in Biological Processes written by Sid M. Becker and published by Academic Press. This book was released on 2017-01-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling of Microscale Transport in Biological Processes provides a compendium of recent advances in theoretical and computational modeling of biotransport phenomena at the microscale. The simulation strategies presented range from molecular to continuum models and consider both numerical and exact solution method approaches to coupled systems of equations. The biological processes covered in this book include digestion, molecular transport, microbial swimming, cilia mediated flow, microscale heat transfer, micro-vascular flow, vesicle dynamics, transport through bio-films and bio-membranes, and microscale growth dynamics. The book is written for an advanced academic research audience in the fields of engineering (encompassing biomedical, chemical, biological, mechanical, and electrical), biology and mathematics. Although written for, and by, expert researchers, each chapter provides a strong introductory section to ensure accessibility to readers at all levels.
Download or read book Modelling Freight Transport written by Lorant Tavasszy and published by Elsevier. This book was released on 2013-10-11 with total page 269 pages. Available in PDF, EPUB and Kindle. Book excerpt: Freight Transport Modelling is a unique new reference book that provides insight into the state-of-the-art of freight modelling. Focusing on models used to support public transport policy analysis, Freight Transport Modelling systematically introduces the latest freight transport modelling approaches and describes the main methods and techniques used to arrive at operational models. As freight transport has grown exponentially in recent decades, policymakers now need to include freight flows in quantitative evaluations of transport systems. Whereas early freight modelling practice was inspired by passenger transport models, by now it has developed its separate stream of methods and techniques inspired by disciplines such as economic geography and supply chain management. Besides summarizing the latest achievements in fundamental research, this book describes the state of practice and advises practitioners on how to cope with typical challenges such as limitations in data availability. - Uniquely focused book exploring the key issues and logistics of freight transport modelling - Highlights the latest approaches and describes the main methods and techniques used to arrive at operational models - Summarizes fundamental research into freight transport modeling, as well as current practices and advice for practitioners facing day-to-day challenges
Download or read book Mass Transfer Processes written by P. A. Ramachandran and published by Prentice Hall. This book was released on 2018-02-19 with total page 1423 pages. Available in PDF, EPUB and Kindle. Book excerpt: The All-in-One Guide to Mass Transport Phenomena: From Theory to Examples and Computation Mass transfer processes exist in practically all engineering fields and many biological systems; understanding them is essential for all chemical engineering students, and for practitioners in a broad range of practices, such as biomedical engineering, environmental engineering, material engineering, and the like. Mass Transfer Processes combines a modern, accessible introduction to modeling and computing these processes with demonstrations of their application in designing reactors and separation systems. P. A. Ramachandran’s integrated approach balances all the knowledge readers need to be effective, rather than merely paying lip service to some crucial topics. He covers both analytical and numerical solutions to mass transfer problems, demonstrating numerical problem-solving with widely used software packages, including MATLAB and CHEBFUN. Throughout, he links theory to realistic examples, both traditional and contemporary. Theory, examples, and in-depth coverage of differential, macroscopic, and mesoscopic modeling Physical chemistry aspects of diffusion phenomena Film models for calculating local mass transfer rates and diffusional interaction in gas–solid and gas–liquid reaction systems Application of mass transfer models in rate-based separation processes, and systems with simultaneous heat and mass transfer Convective mass transfer: empirical correlation, internal and external laminar flows, and turbulent flows Heterogeneous systems, from laminar flow reactors, diffusion-reaction models, reactive membranes, and electrochemical reactors Computations of mass transfer effects in multicomponent systems Solid–gas noncatalytic reactions for chemical, metallurgical, environmental, and electronic processes Applications in electrochemical and biomedical systems Design calculations for humidification, drying, and condensation systems and membrane-based separations Analysis of adsorption, chromatography, electrodialysis, and electrophoresis
Download or read book Solute Transport Modelling written by Randolf Rausch and published by . This book was released on 2005 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transport Modeling for Environmental Engineers and Scientists written by Mark M. Clark and published by John Wiley & Sons. This book was released on 2011-09-20 with total page 662 pages. Available in PDF, EPUB and Kindle. Book excerpt: Transport Modeling for Environmental Engineers and Scientists, Second Edition, builds on integrated transport courses in chemical engineering curricula, demonstrating the underlying unity of mass and momentum transport processes. It describes how these processes underlie the mechanics common to both pollutant transport and pollution control processes.
Download or read book A Basic Introduction to Pollutant Fate and Transport written by Frank M. Dunnivant and published by John Wiley & Sons. This book was released on 2006-02-17 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: A uniquely accessible text on environmental modeling designed for both students and industry personnel Pollutant fate and modeling are becoming increasingly important in both regulatory and scientific areas. However,the complexity of the software and models often act as an inhibitor to the advancement of water quality science. A Basic Introduction to Pollutant Fate and Transport fills the need for a basic instructional tool for students and environmental professionals who lack the rigorous mathematical background necessary to derive the governing fate and transport equations. Taking a refreshingly simple approach to the subject that requires only a basic knowledge of algebra and first-year college chemistry, the book presents and integrates all of the aspects of fate and transport, including chemistry, modeling, risk assessment, and relevant environmental legislation; approaching each topic first conceptually before introducing the math necessary to model it. The first half of the book is dedicated to the chemistry and physics behind the fate and transport models, while the second half teaches and reinforces the logical concepts underlying fate and transport modeling. This better prepares students for support jobs in the environmental arena surrounding chemical industry and Superfund sites. Contributing to the book's ease of use are: An extremely user-friendly software program, Fate, which uses basic models to predict the fate and transport of pollutants in lakes, rivers, groundwater, and atmospheric systems The use of "canned" models to evaluate the importance of model parameters and sensitivity analysis A wealth of easy-to-understand examples and problems A chapter on environmental legislation in the United States and Europe A set of lab exercises, as well as a downloadable set of teaching aids A much-needed basic text for contemporary hydrology or environmental chemistry courses and support courses forthe environmental industry, this is a valuable desk reference for educators and industry professionals.
Download or read book Transport Modeling for Environmental Engineers and Scientists written by Mark M. Clark and published by Wiley-Interscience. This book was released on 1996-09-07 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: A New Approach to Environmental Engineering Education his exciting introduction to environmental modeling unites the principles underlying mass and momentum transport phenomena with environmental processes that ultimately determine the spread and control of pollutants in air, water, and soil. Transport Modeling for Environmental Engineers and Scientists builds on integrated transport courses pioneered thirty years ago in the chemical engineering curriculum, and demonstrates the underlying unity of mass and momentum transport processes. It describes how these processes operate within the major environmental media, and how they underlie and unify the mechanics common to both pollutant transport and pollution control processes. Offering a solid foundation for the development of improved environmental designs and models, this comprehensive text: * Covers the fundamentals of mass and momentum transport processes with an emphasis on aerosol and colloidal systems * Presents an environmental focus on sedimentation, coagulation, adsorption, filtration, dispersion, chromatography, and porous media transport * Includes chapters on chemical kinetics and reactor design * Includes worked examples and numerous exercises at the end of each chapter * Features numerous illustrations. An excellent text for upper-level undergraduate or first-year graduate courses in environmental and chemical engineering, Transport Modeling for Environmental Engineers and Scientists is also well suited for professional environmental engineers and scientists.
Download or read book Optimal Transport for Applied Mathematicians written by Filippo Santambrogio and published by Birkhäuser. This book was released on 2015-10-17 with total page 376 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents a rigorous mathematical introduction to optimal transport as a variational problem, its use in modeling various phenomena, and its connections with partial differential equations. Its main goal is to provide the reader with the techniques necessary to understand the current research in optimal transport and the tools which are most useful for its applications. Full proofs are used to illustrate mathematical concepts and each chapter includes a section that discusses applications of optimal transport to various areas, such as economics, finance, potential games, image processing and fluid dynamics. Several topics are covered that have never been previously in books on this subject, such as the Knothe transport, the properties of functionals on measures, the Dacorogna-Moser flow, the formulation through minimal flows with prescribed divergence formulation, the case of the supremal cost, and the most classical numerical methods. Graduate students and researchers in both pure and applied mathematics interested in the problems and applications of optimal transport will find this to be an invaluable resource.
Download or read book Geochemical and Biogeochemical Reaction Modeling written by Craig M. Bethke and published by Cambridge University Press. This book was released on 2010-12-09 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of reaction processes in the Earth's crust and on its surface, both in the laboratory and in the field. A clear exposition of the underlying equations and calculation techniques is balanced by a large number of fully worked examples. The book uses The Geochemist's Workbench® modeling software, developed by the author and already installed at over 1000 universities and research facilities worldwide. Since publication of the first edition, the field of reaction modeling has continued to grow and find increasingly broad application. In particular, the description of microbial activity, surface chemistry, and redox chemistry within reaction models has become broader and more rigorous. These areas are covered in detail in this new edition, which was originally published in 2007. This text is written for graduate students and academic researchers in the fields of geochemistry, environmental engineering, contaminant hydrology, geomicrobiology, and numerical modeling.
Download or read book Urban Informatics written by Wenzhong Shi and published by Springer Nature. This book was released on 2021-04-06 with total page 941 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book is the first to systematically introduce the principles of urban informatics and its application to every aspect of the city that involves its functioning, control, management, and future planning. It introduces new models and tools being developed to understand and implement these technologies that enable cities to function more efficiently – to become ‘smart’ and ‘sustainable’. The smart city has quickly emerged as computers have become ever smaller to the point where they can be embedded into the very fabric of the city, as well as being central to new ways in which the population can communicate and act. When cities are wired in this way, they have the potential to become sentient and responsive, generating massive streams of ‘big’ data in real time as well as providing immense opportunities for extracting new forms of urban data through crowdsourcing. This book offers a comprehensive review of the methods that form the core of urban informatics from various kinds of urban remote sensing to new approaches to machine learning and statistical modelling. It provides a detailed technical introduction to the wide array of tools information scientists need to develop the key urban analytics that are fundamental to learning about the smart city, and it outlines ways in which these tools can be used to inform design and policy so that cities can become more efficient with a greater concern for environment and equity.
Download or read book Modeling of Process Intensification written by Frerich J. Keil and published by John Wiley & Sons. This book was released on 2007-06-27 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combining the knowledge involved in process engineering and process modeling, this is the first book to cover all modeling methods applicable to process intensification. Both the editors and authors are renowned experts from industry and academia in the various fields of process modeling and integrated chemical processes. Following an introduction to the topic, the book goes on to look at equipment and operational methods, monolithic catalysis, HEX, micro- and reverse flow reactors, catalytic and reactive distillation, the simulated-moving bed and vibration bubble column as well as ultrasound and ultrasonic reactors. A final chapter is devoted to processes under supercritical conditions. In its treatment of hot topics of multidisciplinary interest, this book is of great value to researchers and engineers alike.
