Download or read book An Introduction to Microelectronic Technology written by D. V. Morgan and published by . This book was released on 1985 with total page 207 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Microelectronic Fabrication written by Richard C. Jaeger and published by Pearson. This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: For courses in Theory and Fabrication of Integrated Circuits. The author's goal in writing this text was to present a concise survey of the most up-to-date techniques in the field. It is devoted exclusively to processing, and is highlighted by careful explanations, clear, simple language, and numerous fully-solved example problems. This work assumes a minimal knowledge of integrated circuits and of terminal behavior of electronic components such as resistors, diodes, and MOS and bipolar transistors.
Download or read book Introduction to Microelectronics to Nanoelectronics written by Manoj Kumar Majumder and published by CRC Press. This book was released on 2020-11-24 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focussing on micro- and nanoelectronics design and technology, this book provides thorough analysis and demonstration, starting from semiconductor devices to VLSI fabrication, designing (analog and digital), on-chip interconnect modeling culminating with emerging non-silicon/ nano devices. It gives detailed description of both theoretical as well as industry standard HSPICE, Verilog, Cadence simulation based real-time modeling approach with focus on fabrication of bulk and nano-devices. Each chapter of this proposed title starts with a brief introduction of the presented topic and ends with a summary indicating the futuristic aspect including practice questions. Aimed at researchers and senior undergraduate/graduate students in electrical and electronics engineering, microelectronics, nanoelectronics and nanotechnology, this book: Provides broad and comprehensive coverage from Microelectronics to Nanoelectronics including design in analog and digital electronics. Includes HDL, and VLSI design going into the nanoelectronics arena. Discusses devices, circuit analysis, design methodology, and real-time simulation based on industry standard HSPICE tool. Explores emerging devices such as FinFETs, Tunnel FETs (TFETs) and CNTFETs including their circuit co-designing. Covers real time illustration using industry standard Verilog, Cadence and Synopsys simulations.
Download or read book Introduction to microelectronics technology DES 4012 written by Muhammad Suhaimi Sulong and published by . This book was released on 2008 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Science and Engineering of Microelectronic Fabrication written by Stephen A. Campbell and published by Oxford University Press, USA. This book was released on 1996 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Science and Engineering of Microelectronic Fabrication provides an introduction to microelectronic processing. Geared towards a wide audience, it may be used as a textbook for both first year graduate and upper level undergraduate courses and as a handy reference for professionals. The text covers all the basic unit processes used to fabricate integrated circuits including photolithography, plasma and reactive ion etching, ion implantation, diffusion, oxidation, evaporation, vapor phase epitaxial growth, sputtering and chemical vapor deposition. Advanced processing topics such as rapid thermal processing, nonoptical lithography, molecular beam epitaxy, and metal organic chemical vapor deposition are also presented. The physics and chemistry of each process is introduced along with descriptions of the equipment used for the manufacturing of integrated circuits. The text also discusses the integration of these processes into common technologies such as CMOS, double poly bipolar, and GaAs MESFETs. Complexity/performance tradeoffs are evaluated along with a description of the current state-of-the-art devices. Each chapter includes sample problems with solutions. The book also makes use of the process simulation package SUPREM to demonstrate impurity profiles of practical interest.
Download or read book Microelectronics written by Jerry C. Whitaker and published by CRC Press. This book was released on 2018-10-03 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: When it comes to electronics, demand grows as technology shrinks. From consumer and industrial markets to military and aerospace applications, the call is for more functionality in smaller and smaller devices. Culled from the second edition of the best-selling Electronics Handbook, Microelectronics, Second Edition presents a summary of the current state of microelectronics and its innovative directions. This book focuses on the materials, devices, and applications of microelectronics technology. It details the IC design process and VLSI circuits, including gate arrays, programmable logic devices and arrays, parasitic capacitance, and transmission line delays. Coverage ranges from thermal properties and semiconductor materials to MOSFETs, digital logic families, memory devices, microprocessors, digital-to-analog and analog-to-digital converters, digital filters, and multichip module technology. Expert contributors discuss applications in machine vision, ad hoc networks, printing technologies, and data and optical storage systems. The book also includes defining terms, references, and suggestions for further reading. This edition features two new sections on fundamental properties and semiconductor devices. With updated material and references in every chapter, Microelectronics, Second Edition is an essential reference for work with microelectronics, electronics, circuits, systems, semiconductors, logic design, and microprocessors.
Download or read book Microelectronic Test Structures for CMOS Technology written by Manjul Bhushan and published by Springer Science & Business Media. This book was released on 2011-08-26 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microelectronic Test Structures for CMOS Technology and Products addresses the basic concepts of the design of test structures for incorporation within test-vehicles, scribe-lines, and CMOS products. The role of test structures in the development and monitoring of CMOS technologies and products has become ever more important with the increased cost and complexity of development and manufacturing. In this timely volume, IBM scientists Manjul Bhushan and Mark Ketchen emphasize high speed characterization techniques for digital CMOS circuit applications and bridging between circuit performance and characteristics of MOSFETs and other circuit elements. Detailed examples are presented throughout, many of which are equally applicable to other microelectronic technologies as well. The authors’ overarching goal is to provide students and technology practitioners alike a practical guide to the disciplined design and use of test structures that give unambiguous information on the parametrics and performance of digital CMOS technology.
Download or read book An Introduction to Microelectromechanical Systems Engineering written by Nadim Maluf and published by Artech House. This book was released on 2004 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing you up-to-date with the latest developments in MEMS technology, this major revision of the best-selling An Introduction to Microelectromechanical Systems Engineering offers you a current understanding of this cutting-edge technology. You gain practical knowledge of MEMS materials, design, and manufacturing, and learn how it is being applied in industrial, optical, medical and electronic markets. The second edition features brand new sections on RF MEMS, photo MEMS, micromachining on materials other than silicon, reliability analysis, plus an expanded reference list. With an emphasis on commercialized products, this unique resource helps you determine whether your application can benefit from a MEMS solution, understand how other applications and companies have benefited from MEMS, and select and define a manufacturable MEMS process for your application. You discover how to use MEMS technology to enable new functionality, improve performance, and reduce size and cost. The book teaches you the capabilities and limitations of MEMS devices and processes, and helps you communicate the relative merits of MEMS to your company's management. From critical discussions on design operation and process fabrication of devices and systems, to a thorough explanation of MEMS packaging, this easy-to-understand book clearly explains the basics of MEMS engineering, making it an invaluable reference for your work in the field.
Download or read book Electron Beam Technology in Microelectronic Fabrication written by George Brewer and published by Elsevier. This book was released on 2012-12-02 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electron-Beam Technology in Microelectronic Fabrication presents a unified description of the technology of high resolution lithography. This book is organized into six chapters, each treating a major segment of the technology of high resolution lithography. The book examines topics such as the physics of interaction of the electrons with the polymer resist in which the patterns are drawn, the machines that generate and control the beam, and ways of applying electron-beam lithography in device fabrication and in the making of masks for photolithographic replication. Chapter 2 discusses fundamental processes by which patterns are created in resist masks. Chapter 3 describes electron-beam lithography machines, including some details of each of the major elements in the electron-optical column and their effect on the focused electron beam. Chapter 4 presents the use of electron-beam lithography to make discrete devices and integrated circuits. Chapter 5 looks at the techniques and economics of mask fabrication by the use of electron beams. Finally, Chapter 6 presents a comprehensive description and evaluation of the several high resolution replication processes currently under development. This book will be of great value to students and to engineers who want to learn the unique features of high resolution lithography so that they can apply it in research, development, or production of the next generation of microelectronic devices and circuits.
Download or read book Silicon Earth written by John D. Cressler and published by CRC Press. This book was released on 2017-11-22 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: We are in the center of the most life-changing technological revolution the Earth has ever known. In little more than 65 years, an eye-blink in human history, a single technological invention has launched the proverbial thousand ships, producing the most sweeping and pervasive set of changes ever to wash over humankind; changes that are reshaping the very core of human existence, on a global scale, at a relentlessly accelerating pace. And we are just at the very beginning. Silicon Earth: Introduction to Microelectronics and Nanotechnology introduces readers with little or no technical background to the marvels of microelectronics and nanotechnology, using straightforward language, an intuitive approach, minimal math, and lots of pictures. The general scientific and engineering underpinnings of microelectronics and nanotechnology are described, as well as how this new technological revolution is transforming a broad array of interdisciplinary fields, and civilization as a whole. Special "widget deconstruction" chapters address the inner workings of ubiquitous micro/nano-enabled pieces of technology, such as smartphones, flash drives, and digital cameras. Completely updated and upgraded to full color, the Second Edition: Includes new material on the design of electronic systems, the future of electronics, and the societal impact of micro/nanotechnology Provides new widget deconstructions of cutting-edge tech gadgets like the GPS-enabled smartwatch Adds end-of-chapter study questions and hundreds of new color photos Silicon Earth: Introduction to Microelectronics and Nanotechnology, Second Edition is a pick-up-and-read-cover-to-cover book for those curious about the micro/nanoworld, as well as a classroom-tested, student-and-professor-approved text ideal for an undergraduate-level university course. Lecture slides, homework examples, a deconstruction project, and discussion threads are available via an author-maintained website.
Download or read book Nano and Giga Challenges in Microelectronics written by J. Greer and published by Elsevier. This book was released on 2003-10-24 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is designed as an introduction for engineers and researchers wishing to obtain a fundamental knowledge and a snapshot in time of the cutting edge in technology research. As a natural consequence, Nano and Giga Challenges is also an essential reference for the "gurus" wishing to keep abreast of the latest directions and challenges in microelectronic technology development and future trends. The combination of viewpoints presented within the book can help to foster further research and cross-disciplinary interaction needed to surmount the barriers facing future generations of technology design. Key Features: • Quickly becoming the hottest topic of the new millennium (2.4 billion dollars funding in US alone • Current status and future trends of micro and nanoelectronics research • Written by leading experts in the corresponding research areas • Excellent tutorial for graduate students and reference for "gurus"
Download or read book Principles of Microelectronic Technology written by D. Nagchoudhuri and published by . This book was released on 1998-04-01 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microelectronics Packaging Handbook written by R.R. Tummala and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electronics has become the largest industry, surpassing agriCUlture, auto. and heavy metal industries. It has become the industry of choice for a country to prosper, already having given rise to the phenomenal prosperity of Japan. Korea. Singapore. Hong Kong. and Ireland among others. At the current growth rate, total worldwide semiconductor sales will reach $300B by the year 2000. The key electronic technologies responsible for the growth of the industry include semiconductors. the packaging of semiconductors for systems use in auto, telecom, computer, consumer, aerospace, and medical industries. displays. magnetic, and optical storage as well as software and system technologies. There has been a paradigm shift, however, in these technologies. from mainframe and supercomputer applications at any cost. to consumer applications at approximately one-tenth the cost and size. Personal computers are a good example. going from $500IMIP when products were first introduced in 1981, to a projected $lIMIP within 10 years. Thin. light portable. user friendly and very low-cost are. therefore. the attributes of tomorrow's computing and communications systems. Electronic packaging is defined as interconnection. powering, cool ing, and protecting semiconductor chips for reliable systems. It is a key enabling technology achieving the requirements for reducing the size and cost at the system and product level.
Download or read book Microfabrication for Industrial Applications written by Regina Luttge and published by William Andrew. This book was released on 2011-09-14 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microfabrication for Industrial Applications focuses on the industrial perspective for micro- and nanofabrication methods including large-scale manufacturing, transfer of concepts from lab to factory, process tolerance, yield, robustness, and cost. It gives a history of miniaturization, micro- and nanofabrication, and surveys industrial fields of application, illustrating fabrication processes of relevant micro and nano devices. Concerning sub-micron feature manufacture, the book explains: the philosophy of micro/ nanofabrication for integrated circuit industry; thin film deposition; (waveguide, plastic, semiconductor) material processing; packaging; interconnects; stress (e.g., thin film residual); economic; and environmental aspects. Micro/nanomechanical sensors and actuators are explained in depth with information on applications, materials (incl. functional polymers), methods, testing, fabrication, integration, reliability, magnetic microstructures, etc. Shows engineers & students how to evaluate the potential value of current and nearfuture manufacturing processes for miniaturized systems in industrial environments Explains the top-down and bottom up approaches to nanotechnology, nanostructures fabricated with beams, nano imprinting methods, nanoparticle manufacturing (and their health aspects), nanofeature analysis, and connecting nano to micro to macro Discusses issues for practical application cases; possibilities of dimension precision; large volume manufacturing of micro- & nanostructures (machines, materials, costs) Explains applications of Microsystems for information technology, e.g.: data recording (camera, microphone), storage (memories, CDs), communication; computing; and displays (beamers, LCD, TFT) Case studies are given for sensors, resonators, probes, transdermal medical systems, micro- pumps & valves, inkjets, DNA-analysis, lab-on-a-chip, & micro-cooling
Download or read book Introduction to Microelectronic Systems written by Martin Bates and published by Butterworth-Heinemann. This book was released on 2000 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to its versatility, low cost and rapid adoption in industry, the PIC microcontroller is now beginning to replace conventional microprocessor systems, such as PLCs and the 8051, on electronics courses. This manual is based on the PIC 16F84 which is cheap and reusable, and the text is written for students with a minimal knowledge of microprocessor systems. There are real-time system examples.
Download or read book Microelectronic Devices written by Keith Leaver and published by World Scientific. This book was released on 1997 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this introductory book sets out clearly and concisely the principles of operation of the semiconductor devices that lie at the heart of the microelectronic revolution. The book aims to teach the reader how semiconductor devices are modelled. It begins by providing a firm background in the relevant semiconductor physics. These ideas are then used to construct both circuit models and mathematical models for diodes, bipolar transistors and MOSFETs. It also describes the processes involved in fabricating silicon chips containing these devices. The first edition has already proved a highly useful textbook to first and second year degree students in electrical and electronic engineering, and related disciplines. It is also useful to HND students in similar subject areas, and as supplementary reading for anyone involved in integrated circuit design and fabrication.
Download or read book The Electronics Handbook written by Jerry C. Whitaker and published by CRC Press. This book was released on 2018-10-03 with total page 2640 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the ten years since the appearance of the groundbreaking, bestselling first edition of The Electronics Handbook, the field has grown and changed tremendously. With a focus on fundamental theory and practical applications, the first edition guided novice and veteran engineers along the cutting edge in the design, production, installation, operation, and maintenance of electronic devices and systems. Completely updated and expanded to reflect recent advances, this second edition continues the tradition. The Electronics Handbook, Second Edition provides a comprehensive reference to the key concepts, models, and equations necessary to analyze, design, and predict the behavior of complex electrical devices, circuits, instruments, and systems. With 23 sections that encompass the entire electronics field, from classical devices and circuits to emerging technologies and applications, The Electronics Handbook, Second Edition not only covers the engineering aspects, but also includes sections on reliability, safety, and engineering management. The book features an individual table of contents at the beginning of each chapter, which enables engineers from industry, government, and academia to navigate easily to the vital information they need. This is truly the most comprehensive, easy-to-use reference on electronics available.
