Download or read book Industrial Radiology written by R. Halmshaw and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 317 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial radiography is a well-established non-destructive testing (NDT) method in which the basic principles were established many years ago. However, during 1993-95 the European Standards Organisa tion (CEN) commenced drafting many new standards on NDT including radiographic methods, and when completed these will replace national standards in all the EC member countries. In some cases these standards vary significantly from those in use in the UK at present. These CEN standards are accepted by majority, not unanimous voting, so they will become mandatory even in countries which vote against them. As most are likely to be legal by the time this second edition is published, they are described in the appropriate places in the text. The most important new technical development is the greater use of computers in radiology. In the first edition, computerized tomography was only briefly mentioned at the end of Chapter 11, as it was then largely a medical method with only a few equipments having found a place in industrial use. The method depends on a complex computer program and a large data store. Industrial equipments are now being built, although their spread into industry has been slow. Computer data storage is also being used for radiographic data. Small computers can now store all the data produced by scanning a radiographic film with a small light-spot, and various programs can be applied to these data.
Download or read book An Introduction to Industrial Radiology written by J. C. Rockley and published by . This book was released on 1964 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industrial X Ray Computed Tomography written by Simone Carmignato and published by Springer. This book was released on 2017-10-18 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: X-ray computed tomography has been used for several decades as a tool for measuring the three-dimensional geometry of the internal organs in medicine. However, in recent years, we have seen a move in manufacturing industries for the use of X-ray computed tomography; first to give qualitative information about the internal geometry and defects in a component, and more recently, as a fully-quantitative technique for dimensional and materials analysis. This trend is primarily due to the ability of X-ray computed tomography to give a high-density and multi-scale representation of both the external and internal geometry of a component, in a non-destructive, non-contact and relatively fast way. But, due to the complexity of X-ray computed tomography, there are remaining metrological issues to solve and the specification standards are still under development. This book will act as a one-stop-shop resource for students and users of X-ray computed tomography in both academia and industry. It presents the fundamental principles of the technique, detailed descriptions of the various components (hardware and software), current developments in calibration and performance verification and a wealth of example applications. The book will also highlight where there is still work to do, in the perspective that X-ray computed tomography will be an essential part of Industry 4.0.
Download or read book Radiation Source Use and Replacement written by National Research Council and published by National Academies Press. This book was released on 2008-05-25 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the United States there are several thousand devices containing high-activity radiation sources licensed for use in areas ranging from medical uses such as cancer therapy to safety uses such as testing of structures and industrial equipment. Those radiation sources are licensed by the U.S. Nuclear Regulatory Commission and state agencies. Concerns have been raised about the safety and security of the radiation sources, particularly amid fears that they could be used to create dirty bombs, or radiological dispersal device (RDD). In response to a request from Congress, the U.S. Nuclear Regulatory Commission asked the National Research Council to conduct a study to review the uses of high-risk radiation sources and the feasibility of replacing them with lower risk alternatives. The study concludes that the U.S. government should consider factors such as potential economic consequences of misuse of the radiation sources into its assessments of risk. Although the committee found that replacements of most sources are possible, it is not economically feasible in some cases. The committee recommends that the U.S. government take steps to in the near term to replace radioactive cesium chloride radiation sources, a potential "dirty bomb" ingredient used in some medical and research equipment, with lower-risk alternatives. The committee further recommends that longer term efforts be undertaken to replace other sources. The book presents a number of options for making those replacements.
Download or read book X Ray Imaging written by Harry E. Martz and published by CRC Press. This book was released on 2016-10-26 with total page 590 pages. Available in PDF, EPUB and Kindle. Book excerpt: While books on the medical applications of x-ray imaging exist, there is not one currently available that focuses on industrial applications. Full of color images that show clear spectrometry and rich with applications, X-Ray Imaging fills the need for a comprehensive work on modern industrial x-ray imaging. It reviews the fundamental science of x-ray imaging and addresses equipment and system configuration. Useful to a broad range of radiation imaging practitioners, the book looks at the rapid development and deployment of digital x-ray imaging system.
Download or read book Radiography in Modern Industry written by Eastman Kodak Company. Radiography Markets Division and published by . This book was released on 1969 with total page 168 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to the Mathematics of Medical Imaging written by Charles L. Epstein and published by SIAM. This book was released on 2008-01-01 with total page 794 pages. Available in PDF, EPUB and Kindle. Book excerpt: At the heart of every medical imaging technology is a sophisticated mathematical model of the measurement process and an algorithm to reconstruct an image from the measured data. This book provides a firm foundation in the mathematical tools used to model the measurements and derive the reconstruction algorithms used in most of these modalities. The text uses X-ray computed tomography (X-ray CT) as a 'pedagogical machine' to illustrate important ideas and its extensive discussion of background material makes the more advanced mathematical topics accessible to people with a less formal mathematical education. This new edition contains a chapter on magnetic resonance imaging (MRI), a revised section on the relationship between the continuum and discrete Fourier transforms, an improved description of the gridding method, and new sections on both Grangreat's formula and noise analysis in MR-imaging. Mathematical concepts are illuminated with over 200 illustrations and numerous exercises.
Download or read book Computed Radiography written by Yukio Tateno and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computed radiography is one of the most promising digital radiography techniques, and is expected to replace the conventional screen film radiography in the near future. This book is the first textbook on computed radiography written by Japanese authors and describes basic technologies and clinical results obtained at various hospitals. There are more than 60 CR systems working in clinical environments in Japan. However, as yet there are not so many systems working outside Japan. This book is, therefore, a good introduction to the new technology and practice of the CR system all over the world.
Download or read book Introduction to Intra Operative and Surgical Radiography written by Jim Hughes and published by Oxford University Press. This book was released on 2018-07-04 with total page 265 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Intra-Operative and Surgical Radiography is designed as a quick guide and reference text that covers both imaging techniques and requirements for common surgical procedures, as well as practical information on use of imaging equipment and working in the theatre environment. Each section covers both surgical and imaging techniques, in order to give the radiographer a better idea of what is required. The book includes sections on the most common orthopaedic, urology, hepato-biliary, spinal neurosurgery, paediatric, and pain clinic procedures. Each procedure includes a case summary and comprehensive imaging that covers the positioning, and approach with the imaging equipment, as well as example resulting radiographs with annotations and information for each. Sections also discuss the practical skills of working in theatres such as team work and safe practice, including infection control and sterile fields, radiation protection, and management of resources for running imaging for theatres, including potential errors and pitfalls. . Practical and highly illustrated, Introduction to Intra-Operative and Surgical Radiography provides an accessible and user friendly reference text for radiographers that covers both imaging techniques and requirements for the most common surgical procedures.
Download or read book Medical Imaging Systems written by Andreas Maier and published by Springer. This book was released on 2018-08-02 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book gives a complete and comprehensive introduction to the fields of medical imaging systems, as designed for a broad range of applications. The authors of the book first explain the foundations of system theory and image processing, before highlighting several modalities in a dedicated chapter. The initial focus is on modalities that are closely related to traditional camera systems such as endoscopy and microscopy. This is followed by more complex image formation processes: magnetic resonance imaging, X-ray projection imaging, computed tomography, X-ray phase-contrast imaging, nuclear imaging, ultrasound, and optical coherence tomography.
Download or read book Lessons Learned from Accidents in Industrial Radiography written by International Atomic Energy Agency and published by . This book was released on 1998 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Report contains the findings of extensive research in terms of the lessons that can be learned from accidents which have occurred in industrial radiography, both in developed and developing countries. The review was carried out by a team of regulatory authorities, manufacturers and safety advisers. The objectives were to draw lessons from the initiating events of the accidents, the contributing factors and the consequences, and to identify several measures that, if implemented, would improve safety performance in industrial radiography.
Download or read book Modern Diagnostic X Ray Sources written by Rolf Behling and published by CRC Press. This book was released on 2021-04-18 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gives an up-to-date summary of X-ray source design for applications in modern diagnostic medical imaging. Lays a sound groundwork for education and advanced training in the physics of X-ray production and X-ray interactions with matter. Includes a historical overview of X-ray tube and generator development, including key achievements leading up to the current technological and economic state of the field.
Download or read book Introduction to Radiologic Sciences and Patient Care E Book written by Arlene M. Adler and published by Elsevier Health Sciences. This book was released on 2013-08-13 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn the professional and patient care skills you need for clinical practice! A clear, concise introduction to the imaging sciences, Introduction to Radiologic Sciences and Patient Care meets the standards set by the American Society of Radiologic Technologists (ASRT) Curriculum Guide and the American Registry of Radiologic Technologists (ARRT) Task List for certification examinations. Covering the big picture, expert authors Arlene M. Adler and Richard R. Carlton provide a complete overview of the radiologic sciences professions and of all aspects of patient care. More than 300 photos and line drawings clearly demonstrate patient care procedures. Step-by-step procedures make it easy to follow learn skills and prepare for clinicals. Chapter outlines and objectives help you master key concepts. Key Terms with definitions are presented at the beginning of each chapter. Up-to-date references are provided at the end of each chapter. Appendices prepare you for the practice environment by including practice standards, professional organizations, state licensing agencies, the ARRT code of ethics, and patient's rights information. 100 new photos and 160 new full-color line drawings show patient care procedures. Updates ensure that you are current with the Fundamentals and Patient Care sections of the ASRT core curriculum guidelines. New and expanded coverage is added to the chapters on critical thinking, radiographic imaging, vital signs, professional ethics, and medical law. Student resources on a companion Evolve website help you master procedures with patient care lab activities and review questions along with 40 patient care videos.
Download or read book An Introduction to Radiography E Book written by Suzanne Easton and published by Elsevier Health Sciences. This book was released on 2009-03-23 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a solid foundation in radiography for first year degree students by giving an overview of the basic principles and inspiring them to explore further the concepts presented. It also covers the core knowledge and standards for professional practice in sufficient depth to enable Assistant Practitioners to pass their NVQ examinations, practise their skills effectively and provide good patient care. - Very structured text with clear headings and relevance to practice indicated throughout - Chapter style will enable students to dip into text to find relevant information as an aid to revision - Set of revision questions at end of each chapter - All contributors currently teach Assistant Practitioners and student radiographers
Download or read book Radiation Protection and Safety in Industrial Radiography written by International Atomic Energy Agency and published by . This book was released on 1999 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Report summarizes good and current state of the art practices in industrial radiography and provides technical advice on radiation protection and safety. It contains information explaining the responsibilities of regulatory authorities, operating organizations, workers, equipment manufacturers and client organizations, with the intention of enhancing radiation protection and safety.
Download or read book Radiology Business Practice written by David M. Yousem and published by Elsevier Health Sciences. This book was released on 2007-11-19 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: To succeed in radiology, you not only need to be able to interpret diagnostic images accurately and efficiently; you also need to make wise decisions about managing your practice at every level. Whether you work in a private, group, hospital, and/or university setting, this practical resource delivers the real-world advice you need to effectively navigate day-to-day financial decisions, equipment and computer systems choices, and interactions with your partners and staff. - Equips you to make the best possible decisions on assessing your equipment needs · dealing with manufacturers · purchasing versus leasing · and anticipating maintenance costs and depreciation. - Helps you to identify your most appropriate options for picture archiving systems and radiology information systems · security issues · high-speed lines · storage issues · workstation assessments · and paperless filmless flow. - Offers advice on dealing with departments/clinicians who wish to perform radiological procedures and provides strategies for win-win compromises, drawing the line, inpatient-versus-outpatient considerations, cost and revenue sharing, and more.
Download or read book Handbook of Technical Diagnostics written by Horst Czichos and published by Springer Science & Business Media. This book was released on 2013-01-11 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents concepts, methods and techniques to examine symptoms of faults and failures of structures, systems and components and to monitor functional performance and structural integrity. The book is organized in five parts. Part A introduces the scope and application of technical diagnostics and gives a comprehensive overview of the physics of failure. Part B presents all relevant methods and techniques for diagnostics and monitoring: from stress, strain, vibration analysis, nondestructive evaluation, thermography and industrial radiology to computed tomography and subsurface microstructural analysis. Part C cores the principles and concepts of technical failure analysis, illustrates case studies, and outlines machinery diagnostics with an emphasis on tribological systems. Part D describes the application of structural health monitoring and performance control to plants and the technical infrastructure, including buildings, bridges, pipelines, electric power stations, offshore wind structures, and railway systems. And finally, Part E is an excursion on diagnostics in arts and culture. The book integrates knowledge of basic sciences and engineering disciplines with contributions from research institutions, academe, and industry, written by internationally known experts from various parts of the world, including Europe, Canada, India, Japan, and USA.
