Download or read book An Introduction to Corrosion Mitigation Technologies in Concrete Repairs for Professional Engineers written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2023-01-25 with total page 45 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil engineers, structural engineers and construction managers interested in corrosion mitigation technologies for steel reinforced concrete structures. Here is what is discussed: 1. GENERAL, 2. PRODUCTS, 3. EXECUTION.
Download or read book An Introduction to Evaluation of Corrosion Mitigation Technologies in Concrete Repairs for Professional Engineers written by J. Paul Guyer and published by Guyer Partners. This book was released on 2022-12-31 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil engineers and other professional engineers and construction managers interested in corrosion mitigation in concrete construction. Here is what is discussed: 1. GENERAL, 2. PRODUCTS, 3. EXECUTION.
Download or read book An Introduction to Evaluation of Corrosion Mitigation Technologies in Concrete Repairs written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2020-02-09 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil engineers and others interested in evaluation of corrosion mitigation technologies for concrete repairs. Here is what is discussed: 1. GENERAL 2. PRODUCTS 3. EXECUTION.
Download or read book An Introduction to Hydroelectric Power Systems for Professional Engineers written by J. Paul Guyer and published by Guyer Partners. This book was released on 2023-01-03 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for professional engineers interested in hydroelectric power systems. Here is what is discussed: 1. COMPUTER SIMULATION OF POWER POTENTIAL, 2. POWER PLANT SIZING, 3. POWER OPERATIONS, 4. POWER PLANT STRUCTURES, 5. GENERATOR VOLTAGE, STATION SERVICE AND CONTROLS, 6. HIGH VOLTAGE SYSTEMS, 7. GENERATORS, 8. TURBINES, 9. OIL, COMPRESSED AIR, PLUMBING AND FIRE PROTECTION SYSTEMS, 10. WATER SUPPLY, UNWATERING AND DRAINAGE, 11. PUMPED STORAGE.
Download or read book Corrosion of Steel in Concrete Structures written by Amir Poursaee and published by Woodhead Publishing. This book was released on 2023-02-20 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Essential reading for researchers, practitioners, and engineers, this book covers not only all the important aspects in the field of corrosion of steel reinforced concrete but also discusses new topics and future trends. Theoretical concepts of corrosion of steel in concrete structures, the variety of reinforcing materials and concrete, including stainless steel and galvanized steel, measurements and evaluations, such as electrochemical techniques and acoustic emission, protection and maintenance methods, and modelling, latest developments, and future trends in the field are discussed. - Comprehensive coverage of the corrosion of steel bars in concrete, investigating the range of reinforcing materials, and types of concrete - Introduces the latest measuring methods, data collection, and advanced modeling techniques - Second edition covers a range of new, emerging topics such as the concept of chloride threshold value, concrete permeability and chloride diffusion, the role of steel microstructure, and innovations in corrosion detection devices
Download or read book Principles of Corrosion Engineering and Corrosion Control written by Zaki Ahmad and published by Elsevier. This book was released on 2006-09-18 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion is a huge issue for materials, mechanical, civil and petrochemical engineers. With comprehensive coverage of the principles of corrosion engineering, this book is a one-stop text and reference for students and practicing corrosion engineers. Highly illustrated, with worked examples and definitions, it covers basic corrosion principles, and more advanced information for postgraduate students and professionals. Basic principles of electrochemistry and chemical thermodynamics are incorporated to make the book accessible for students and engineers who do not have prior knowledge of this area. Each form of corrosion covered in the book has a definition, description, mechanism, examples and preventative methods. Case histories of failure are cited for each form. End of chapter questions are accompanied by an online solutions manual.* Comprehensively covers the principles of corrosion engineering, methods of corrosion protection and corrosion processes and control in selected engineering environments* Structured for corrosion science and engineering classes at senior undergraduate and graduate level, and is an ideal reference that readers will want to use in their professional work* Worked examples, extensive end of chapter exercises and accompanying online solutions and written by an expert from a key pretochemical university
Download or read book Tailored Thin Coatings for Corrosion Inhibition Using a Molecular Approach written by Simo Olavi Pehkonen and published by Academic Press. This book was released on 2018-08-25 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tailored Thin Coatings for Corrosion Inhibition Using a Molecular Approach discusses the fundamentals and applications of various thin coatings for the inhibition of fouling and corrosion from a molecular perspective. It provides the reader with a fundamental understanding of why certain coatings perform better than others in a given environment. Surface analytical and electrochemical techniques in understanding the coating performance are emphasized throughout the book, providing readers with a useful reference on how to pursue a systematic corrosion inhibitor R&D program that involves the testing of coating performance using various, currently available, state-of-the-art laboratory techniques. Wherever relevant, environmental considerations of the discussed coatings' technologies are highlighted and discussed, with current and upcoming regulatory trends put forth by different governmental organizations. - Provides atomic and molecular level understanding of tailored thin coatings for corrosion inhibition - Discusses key steps in corrosion, including the attachment of harmful substances to surfaces, the fouling of surfaces, and the initiation and propagation of corrosion on surfaces - Written by leading experts in the field
Download or read book Principles of Chemical Engineering Processes written by Nayef Ghasem and published by CRC Press. This book was released on 2008-09-19 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written in a clear, concise style, Principles of Chemical Engineering Processes provides an introduction to the basic principles and calculation techniques that are fundamental to the field. The text focuses on problems in material and energy balances in relation to chemical reactors and introduces software that employs numerical methods to solve these problems. Upon mastery of this material, readers will be able to: Understand basic processing terminology (batch, semibatch, continuous, purge, and recycle) and standard operations (reaction, distillation, absorption, extraction, and filtration) Draw and fully label a flowchart for a given process description Choose a convenient basis for calculation for both single- and multiple-unit processes Identify possible subsystems for which material and energy balances might be written Perform a degree of freedom analysis for the overall system and each possible subsystem, formulating the appropriate material and energy balance equations Apply the first law of thermodynamics, calculate energy and enthalpy changes, and construct energy balances on closed and open systems Written as a text to fully meet the needs of advanced undergraduate students, it is also suitable as a reference for chemical engineers with its wide coverage across the biochemical and electromechanical fields. Each chapter of the text provides examples, case studies, and end-of-chapter problems, and the accompanying CD-ROM contains software designed for solving problems in chemical engineering.
Download or read book Handbook of Corrosion Engineering written by Pierre Roberge and published by McGraw-Hill Prof Med/Tech. This book was released on 1999-09-30 with total page 1154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reduce the enormous economic and environmental impact of corrosion Emphasizing quantitative techniques, this guide provides you with: *Theory essential for understanding aqueous, atmospheric, and high temperature corrosion processes Corrosion resistance data for various materials Management techniques for dealing with corrosion control, including life prediction and cost analysis, information systems, and knowledge re-use Techniques for the detection, analysis, and prevention of corrosion damage, including protective coatings and cathodic protection More
Download or read book CIM Bulletin written by Canadian Institute of Mining, Metallurgy and Petroleum and published by . This book was released on 2001 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Concrete Repair Bulletin written by and published by . This book was released on 2008 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Corrosion Prevention and Control written by and published by . This book was released on 1987 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book An Introduction to Hazardous Water Testing for Precipitation Coagulation Flocculation Treatment for Professional Engineers written by J. Paul Guyer, P.E., R.A. and published by Guyer Partners. This book was released on 2021-10-02 with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory technical guidance for civil engineers and environmental engineers interested in testing of hazardous water for precipitation, coagulation and flocculation treatment. Here is what is discussed: 1. TREATABILITY TESTING 2. PRE-TREATMENT REQUIREMENTS 3. EQUIPMENT REQUIREMENTS.
Download or read book Frontiers in Civil and Hydraulic Engineering Volume 2 written by Mohamed A. Ismail and published by CRC Press. This book was released on 2023-03-23 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: Frontiers in Civil and Hydraulic Engineering focuses on the research of architecture and hydraulic engineering in civil engineering. The proceedings feature the most cutting-edge research directions and achievements related to civil and hydraulic engineering. Subjects in the proceedings including: Engineering Structure Intelligent Building Structural Seismic Resistance Monitoring and Testing Hydraulic Engineering Engineering Facility The works of this proceedings can promote development of civil and hydraulic engineering, resource sharing, flexibility and high efficiency. Thereby, promote scientific information interchange between scholars from the top universities, research centers and high-tech enterprises working all around the world.
Download or read book Corrosion Control for Offshore Structures written by Ramesh Singh and published by Gulf Professional Publishing. This book was released on 2014-08-12 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: A variable game changer for those companies operating in hostile, corrosive marine environments, Corrosion Control for Offshore Structures provides critical corrosion control tips and techniques that will prolong structural life while saving millions in cost. In this book, Ramesh Singh explains the ABCs of prolonging structural life of platforms and pipelines while reducing cost and decreasing the risk of failure. Corrosion Control for Offshore Structures places major emphasis on the popular use of cathodic protection (CP) combined with high efficiency coating to prevent subsea corrosion. This reference begins with the fundamental science of corrosion and structures and then moves on to cover more advanced topics such as cathodic protection, coating as corrosion prevention using mill applied coatings, field applications, and the advantages and limitations of some common coating systems. In addition, the author provides expert insight on a number of NACE and DNV standards and recommended practices as well as ISO and Standard and Test Methods. Packed with tables, charts and case studies, Corrosion Control for Offshore Structures is a valuable guide to offshore corrosion control both in terms of its theory and application. - Prolong the structural life of your offshore platforms and pipelines - Understand critical topics such as cathodic protection and coating as corrosion prevention with mill applied coatings - Gain expert insight on a number of NACE and DNV standards and recommended practices as well as ISO and Standard Test Methods.
Download or read book Uhlig s Corrosion Handbook written by Robert Winston Revie and published by . This book was released on 2011 with total page 1253 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves as a reference for engineers, scientists, and students concerned with the use of materials in applications where reliability and resistance to corrosion are important. It updates the coverage of its predecessor, including coverage of: corrosion rates of steel in major river systems and atmospheric corrosion rates, the corrosion behavior of materials such as weathering steels and newer stainless alloys, and the corrosion behavior and engineering approaches to corrosion control for nonmetallic materials. New chapters include: high-temperature oxidation of metals and alloys, nanom.
Download or read book Collaboration and Integration in Construction Engineering Management and Technology written by Syed M. Ahmed and published by Springer Nature. This book was released on 2020-12-21 with total page 651 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers papers presented at the 11th International Conference on Construction in the 21st Century, held in London in 2019. Bringing together a diverse group of government agencies, academics, professionals, and students, the book addresses issues related to construction safety, innovative technologies, lean and sustainable construction, international construction, improving quality and productivity, and innovative materials in the construction industry. In addition, it highlights international collaborations between various disciplines in the areas of construction, engineering, management, and technology. The book demonstrates that, as the industry moves forward in an ever-complex global economy, multi-national collaboration is crucial, and its future growth will undoubtedly depend on international teamwork and alliances.
