Download or read book An Introduction to Computer Simulation Methods written by Harvey Gould and published by Addison Wesley Publishing Company. This book was released on 1988 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction To Computer Simulations For Integrated Stem College Education written by Mohamed M Hafez and published by World Scientific. This book was released on 2019-09-23 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is written to introduce computer simulations to undergraduate college students, freshmen to seniors, in STEM fields. The book starts with concepts from Basic Mathematics: Geometry, Algebra and Calculus, Properties of Elementary Functions (Polynomials, Exponential, Hyperbolic and Trigonometric Functions) are studied and simple differential equations representing these functions are derived. Numerical approximations of first and second order differential equations are studied in terms of finite differences on uniform grids. Computer solutions are obtained via recursive relations or solutions of simultaneous algebraic equations. Comparisons with the exact solutions (known a priori) allow the calculations of the error due to discretization. After the students build confidence in this approach, more problems where the solutions are not known a priori are tackled with applications in many fields. Next, the book gradually addresses linear differential equations with variable coefficients and nonlinear differential equations, including problems of bifurcation and chaos.Applications in Dynamics, Solid Mechanics, Fluid Mechanics, Heat Transfer, Chemical Reactions, and Combustion are included. Biographies of 50 pioneering mathematicians and scientists who contributed to the materials of the book are briefly sketched, to shed light on the history of these STEM fields.Finally, the main concepts discussed in the book, are summarized to make sure that the students do not miss any of them. Also, references for further readings are given for interested readers.

Download or read book Creating Computer Simulation Systems written by Dr. Frederick Kuhl and published by Prentice Hall. This book was released on 2000 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an introduction to the High Level Architecture for modeling and simulation. The HLA is a software architecture for creating computer models and simulation out of component models or simulations. HLA was adopted by the US Defense Dept. The book is an introduction to HLA for application developers.

Download or read book Introduction to Computer Simulation written by Nancy Roberts and published by Addison Wesley Publishing Company. This book was released on 1983 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to Mathematical Modeling and Computer Simulations written by Vladimir Mityushev and published by CRC Press. This book was released on 2018-02-19 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Mathematical Modeling and Computer Simulations is written as a textbook for readers who want to understand the main principles of Modeling and Simulations in settings that are important for the applications, without using the profound mathematical tools required by most advanced texts. It can be particularly useful for applied mathematicians and engineers who are just beginning their careers. The goal of this book is to outline Mathematical Modeling using simple mathematical descriptions, making it accessible for first- and second-year students.

Download or read book Science in the Age of Computer Simulation written by Eric Winsberg and published by University of Chicago Press. This book was released on 2010-10-30 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Digital computer simulation helps study phenomena of great complexity, but how much do we know about the limits and possibilities of this new scientific practice? How do simulations compare to traditional experiments? And are they reliable? Scrutinizing these issues with a philosophical lens, Eric Winsberg explores the impact of simulation on such issues as the nature of scientific evidence, the role of values in science, the nature and role of fictions in science, and the relationship between simulation and experiment, theories and data, and theories at different levels of description"--Cover.

Download or read book Computer Simulation of Liquids written by M. P. Allen and published by Oxford University Press. This book was released on 1989 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer simulation is an essential tool in studying the chemistry and physics of liquids. Simulations allow us to develop models and to test them against experimental data. This book is an introduction and practical guide to the molecular dynamics and Monte Carlo methods.

Download or read book Computer Simulation Using Particles written by R.W Hockney and published by CRC Press. This book was released on 2021-03-24 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer simulation of systems has become an important tool in scientific research and engineering design, including the simulation of systems through the motion of their constituent particles. Important examples of this are the motion of stars in galaxies, ions in hot gas plasmas, electrons in semiconductor devices, and atoms in solids and liquids. The behavior of the system is studied by programming into the computer a model of the system and then performing experiments with this model. New scientific insight is obtained by observing such computer experiments, often for controlled conditions that are not accessible in the laboratory. Computer Simulation using Particles deals with the simulation of systems by following the motion of their constituent particles. This book provides an introduction to simulation using particles based on the NGP, CIC, and P3M algorithms and the programming principles that assist with the preparations of large simulation programs based on the OLYMPUS methodology. It also includes case study examples in the fields of astrophysics, plasmas, semiconductors, and ionic solids as well as more detailed mathematical treatment of the models, such as their errors, dispersion, and optimization. This resource will help you understand how engineering design can be assisted by the ability to predict performance using the computer model before embarking on costly and time-consuming manufacture.

Download or read book Computer Simulation and Computer Algebra written by Dietrich Stauffer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: The chapter on statistical-physics simulations has been enlarged, mainly by a dis cussion of multispin coding techniques for the Ising model (bit-by-bit parallel oper ations). In the chapter about Reduce, some details of the presentation have been cor rected or clarified. The new operator MATEIGEN for the computation of eigenvec tors of matrices is explained. The first chapter and the appendix remain unchanged. Needless to say, the field of computational science is advancing so quickly, for ex ample with the development of parallel, as opposed to vectorized, algorithms, that it will not be too long before a further edition is called for. Cologne, March 1989 The authors Preface to the First Edition Computers play an increasingly important role in many of today's activities, and correspondingly physicists find employment after graduation in computer related jobs, often quite remote from their physics education. The present lectures, on the other hand, emphasize how we can use computers for the purposes of fundamental research in physics. Thus we do not deal with programs designed for newspapers, banks, or travel agencies, i.e., word processing and storage of large amounts of data.

Download or read book Computer Simulation Validation written by Claus Beisbart and published by Springer. This book was released on 2019-04-09 with total page 1056 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique volume introduces and discusses the methods of validating computer simulations in scientific research. The core concepts, strategies, and techniques of validation are explained by an international team of pre-eminent authorities, drawing on expertise from various fields ranging from engineering and the physical sciences to the social sciences and history. The work also offers new and original philosophical perspectives on the validation of simulations. Topics and features: introduces the fundamental concepts and principles related to the validation of computer simulations, and examines philosophical frameworks for thinking about validation; provides an overview of the various strategies and techniques available for validating simulations, as well as the preparatory steps that have to be taken prior to validation; describes commonly used reference points and mathematical frameworks applicable to simulation validation; reviews the legal prescriptions, and the administrative and procedural activities related to simulation validation; presents examples of best practice that demonstrate how methods of validation are applied in various disciplines and with different types of simulation models; covers important practical challenges faced by simulation scientists when applying validation methods and techniques; offers a selection of general philosophical reflections that explore the significance of validation from a broader perspective. This truly interdisciplinary handbook will appeal to a broad audience, from professional scientists spanning all natural and social sciences, to young scholars new to research with computer simulations. Philosophers of science, and methodologists seeking to increase their understanding of simulation validation, will also find much to benefit from in the text.

Download or read book Computer Simulation and Data Analysis in Molecular Biology and Biophysics written by Victor Bloomfield and published by Springer Science & Business Media. This book was released on 2009-06-05 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an introduction to two important aspects of modern bioch- istry, molecular biology, and biophysics: computer simulation and data analysis. My aim is to introduce the tools that will enable students to learn and use some f- damental methods to construct quantitative models of biological mechanisms, both deterministicandwithsomeelementsofrandomness;tolearnhowconceptsofpr- ability can help to understand important features of DNA sequences; and to apply a useful set of statistical methods to analysis of experimental data. The availability of very capable but inexpensive personal computers and software makes it possible to do such work at a much higher level, but in a much easier way, than ever before. TheExecutiveSummaryofthein?uential2003reportfromtheNationalAcademy of Sciences, “BIO 2010: Transforming Undergraduate Education for Future - search Biologists” [12], begins The interplay of the recombinant DNA, instrumentation, and digital revolutions has p- foundly transformed biological research. The con?uence of these three innovations has led to important discoveries, such as the mapping of the human genome. How biologists design, perform, and analyze experiments is changing swiftly. Biological concepts and models are becoming more quantitative, and biological research has become critically dependent on concepts and methods drawn from other scienti?c disciplines. The connections between the biological sciences and the physical sciences, mathematics, and computer science are rapidly becoming deeper and more extensive.

Download or read book An Introduction to Statistical Computing written by Jochen Voss and published by John Wiley & Sons. This book was released on 2013-08-28 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction to sampling-based methods in statistical computing The use of computers in mathematics and statistics has opened up a wide range of techniques for studying otherwise intractable problems. Sampling-based simulation techniques are now an invaluable tool for exploring statistical models. This book gives a comprehensive introduction to the exciting area of sampling-based methods. An Introduction to Statistical Computing introduces the classical topics of random number generation and Monte Carlo methods. It also includes some advanced methods such as the reversible jump Markov chain Monte Carlo algorithm and modern methods such as approximate Bayesian computation and multilevel Monte Carlo techniques An Introduction to Statistical Computing: Fully covers the traditional topics of statistical computing. Discusses both practical aspects and the theoretical background. Includes a chapter about continuous-time models. Illustrates all methods using examples and exercises. Provides answers to the exercises (using the statistical computing environment R); the corresponding source code is available online. Includes an introduction to programming in R. This book is mostly self-contained; the only prerequisites are basic knowledge of probability up to the law of large numbers. Careful presentation and examples make this book accessible to a wide range of students and suitable for self-study or as the basis of a taught course.

Download or read book An Introduction to Mathematical Modeling written by Edward A. Bender and published by Courier Corporation. This book was released on 2012-05-23 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: Employing a practical, "learn by doing" approach, this first-rate text fosters the development of the skills beyond the pure mathematics needed to set up and manipulate mathematical models. The author draws on a diversity of fields — including science, engineering, and operations research — to provide over 100 reality-based examples. Students learn from the examples by applying mathematical methods to formulate, analyze, and criticize models. Extensive documentation, consisting of over 150 references, supplements the models, encouraging further research on models of particular interest. The lively and accessible text requires only minimal scientific background. Designed for senior college or beginning graduate-level students, it assumes only elementary calculus and basic probability theory for the first part, and ordinary differential equations and continuous probability for the second section. All problems require students to study and create models, encouraging their active participation rather than a mechanical approach. Beyond the classroom, this volume will prove interesting and rewarding to anyone concerned with the development of mathematical models or the application of modeling to problem solving in a wide array of applications.

Download or read book Introduction to Modeling and Simulation with MATLAB and Python written by Steven I. Gordon and published by CRC Press. This book was released on 2017-07-12 with total page 211 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Modeling and Simulation with MATLAB and Python is intended for students and professionals in science, social science, and engineering that wish to learn the principles of computer modeling, as well as basic programming skills. The book content focuses on meeting a set of basic modeling and simulation competencies that were developed as part of several National Science Foundation grants. Even though computer science students are much more expert programmers, they are not often given the opportunity to see how those skills are being applied to solve complex science and engineering problems and may also not be aware of the libraries used by scientists to create those models. The book interleaves chapters on modeling concepts and related exercises with programming concepts and exercises. The authors start with an introduction to modeling and its importance to current practices in the sciences and engineering. They introduce each of the programming environments and the syntax used to represent variables and compute mathematical equations and functions. As students gain more programming expertise, the authors return to modeling concepts, providing starting code for a variety of exercises where students add additional code to solve the problem and provide an analysis of the outcomes. In this way, the book builds both modeling and programming expertise with a "just-in-time" approach so that by the end of the book, students can take on relatively simple modeling example on their own. Each chapter is supplemented with references to additional reading, tutorials, and exercises that guide students to additional help and allows them to practice both their programming and analytical modeling skills. In addition, each of the programming related chapters is divided into two parts – one for MATLAB and one for Python. In these chapters, the authors also refer to additional online tutorials that students can use if they are having difficulty with any of the topics. The book culminates with a set of final project exercise suggestions that incorporate both the modeling and programming skills provided in the rest of the volume. Those projects could be undertaken by individuals or small groups of students. The companion website at http://www.intromodeling.com provides updates to instructions when there are substantial changes in software versions, as well as electronic copies of exercises and the related code. The website also offers a space where people can suggest additional projects they are willing to share as well as comments on the existing projects and exercises throughout the book. Solutions and lecture notes will also be available for qualifying instructors.

Download or read book Computer Simulation in Physics and Engineering written by Martin Oliver Steinhauser and published by Walter de Gruyter. This book was released on 2012-12-06 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work is a needed reference for widely used techniques and methods of computer simulation in physics and other disciplines, such as materials science. Molecular dynamics computes a molecule's reactions and dynamics based on physical models; Monte Carlo uses random numbers to image a system's behaviour when there are different possible outcomes with related probabilities. The work conveys both the theoretical foundations as well as applications and "tricks of the trade", that often are scattered across various papers. Thus it will meet a need and fill a gap for every scientist who needs computer simulations for his/her task at hand. In addition to being a reference, case studies and exercises for use as course reading are included.

Download or read book Introduction to Computational Science written by Angela B. Shiflet and published by Princeton University Press. This book was released on 2014-03-30 with total page 857 pages. Available in PDF, EPUB and Kindle. Book excerpt: The essential introduction to computational science—now fully updated and expanded Computational science is an exciting new field at the intersection of the sciences, computer science, and mathematics because much scientific investigation now involves computing as well as theory and experiment. This textbook provides students with a versatile and accessible introduction to the subject. It assumes only a background in high school algebra, enables instructors to follow tailored pathways through the material, and is the only textbook of its kind designed specifically for an introductory course in the computational science and engineering curriculum. While the text itself is generic, an accompanying website offers tutorials and files in a variety of software packages. This fully updated and expanded edition features two new chapters on agent-based simulations and modeling with matrices, ten new project modules, and an additional module on diffusion. Besides increased treatment of high-performance computing and its applications, the book also includes additional quick review questions with answers, exercises, and individual and team projects. The only introductory textbook of its kind—now fully updated and expanded Features two new chapters on agent-based simulations and modeling with matrices Increased coverage of high-performance computing and its applications Includes additional modules, review questions, exercises, and projects An online instructor's manual with exercise answers, selected project solutions, and a test bank and solutions (available only to professors) An online illustration package is available to professors

Download or read book Computer Simulation Methods in Theoretical Physics written by Dieter W. Heermann and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational methods pertaining to many branches of science, such as physics, physical chemistry and biology, are presented. The text is primarily intended for third-year undergraduate or first-year graduate students. However, active researchers wanting to learn about the new techniques of computational science should also benefit from reading the book. It treats all major methods, including the powerful molecular dynamics method, Brownian dynamics and the Monte-Carlo method. All methods are treated equally from a theroetical point of view. In each case the underlying theory is presented and then practical algorithms are displayed, giving the reader the opportunity to apply these methods directly. For this purpose exercises are included. The book also features complete program listings ready for application.