Download or read book An Introduction to Automotive Composites written by Nick Tucker and published by iSmithers Rapra Publishing. This book was released on 2002 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an upb306d and expanded version of the course notes for the Composite Awareness course run by the Warwick Manufacturing Group in 1998-1999. The book gives readers an appreciation of composites, materials properties, manufacturing technologies and the wider implications of using composites in the automotive sector. It will be useful for those already working with composites in automotive applications and for those who are considering using them in the future.

Download or read book Composites for Automotive Truck and Mass Transit written by Uday Vaidya and published by DEStech Publications, Inc. This book was released on 2011 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook is a step-by-step introduction to nanocomposite materials using methods familiar to materials science students and engineers. It covers all nanoparticle types, including flakes, nanotubes, and nanoparticulates. It provides the basics for composites with reinforcements ranging from microns to nanometers.

Download or read book Automotive Plastics and Composites written by Joseph P. Greene and published by Elsevier. This book was released on 2021-06-23 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Automotive Plastics and Composites: Materials and Processing is an essential guide to the use of plastic and polymer composites in automotive applications, whether in the exterior, interior, under-the-hood, or powertrain, with a focus on materials, properties, and processing. The book begins by introducing plastics and polymers for the automotive industry, discussing polymer materials and structures, mechanical, chemical, and physical properties, rheology, and flow analysis. In the second part of the book, each chapter is dedicated to a category of material, and considers the manufacture, processing, properties, shrinkage, and possible applications, in each case. Two chapters on polymer processing provide detailed information on both closed-mold and open-mold processing. The final chapters explain other key aspects, such as recycling and sustainability, design principles, tooling, and future trends. This book is an ideal reference for plastics engineers, product designers, technicians, scientists, and R&D professionals who are looking to develop materials, components, or products for automotive applications. The book also intends to guide researchers, scientists, and advanced students in plastics engineering, polymer processing, and materials science and engineering. Analyzes mechanical, chemical, physical, and thermal properties, enabling the reader to select the appropriate material for specific applications Explains polymer processing, with thorough coverage of operations across both closed-mold and open-mold processing Provides systematic coverage of materials, including commodity and engineering thermoplastics, bio-based plastics, thermosets, composites, elastomeric polymers, and 3D-printed plastics

Download or read book Introduction to Design with Automotive Composites written by John James Kibler and published by CRC Press. This book was released on 1989-01-01 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Green Composites for Automotive Applications written by Georgios Koronis and published by Woodhead Publishing. This book was released on 2018-11-10 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: Green Composites for Automotive Applications presents cutting-edge, comprehensive reviews on the industrial applications of green composites. The book provides an elaborative assessment of both academic and industrial research on eco-design, durability issues, environmental performance, and future trends. Particular emphasis is placed on the processing and characterization of green composites, specific types of materials, such as thermoset and thermoplastic, nanocomposites, sandwich, and polymer biofoams. Additional sections cover lifecycle and risk analysis. As such, this book is an essential reference resource for R&D specialists working in materials science, automotive, chemical, and environmental engineering, as well as R&D managers in industry. - Contains contributions from leading experts in the field - Covers experimental, analytical and numerical analysis - Deals with most important automotive aspects - Provides a special section dedicated to lifecycle assessment

Download or read book Automotive Carbon Fiber Composites written by Jackie D Rehkopf and published by SAE International. This book was released on 2011-11-29 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of new materials that are technically and economically viable is no small endeavor. The risks, costs, and time involved in research are usually so high that only governments or private consortia can bear them. And so it has been with the trajectory of carbon fiber reinforced composites, which are capable of providing the lightweighting needed for fuel efficiency, and the mechanical strength required for safety. After a long development cycle, this material is now being widely used by the military, in commercial aircraft, and in the automotive industry. Automotive Carbon Fiber Composites: From Evolution to Implementation, written by Dr. Jackie Rehkopf, senior researcher at Plasan Carbon Composites, gives a high-level summary on carbon reinforced fiber composites specific to the automotive industry in today’s market and its vision for the next 5 to 10 years. It begins with a comprehensive and easy-to-read overview of how composites started to be investigated as a possible alternative to metals, mostly driven by military demands, going on to cover: Fiber and resin types for automotive applications Composite constructions Manufacturing processes Machining and joining Reclaiming and recycling of these materials, among other topics. The title approaches the future with the realistic optimism of those who work with the challenges of creating new solutions to problems that will stay with us for some time to come: the need to conserve energy and make transportation ever more affordable without the loss of safety. Carbon fiber reinforced composites have demonstrated real value in positively addressing these issues. Automotive Carbon Fiber Composites: From Evolution to Implementation is an excellent guide for those involved in technical material strategy and research, as well as those who need to understand the basics of this subject to support better business decisions.

Download or read book Introduction to Composite Materials written by StephenW. Tsai and published by Routledge. This book was released on 2018-05-02 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: A widely used basic text by two recognized authorities. A unified and disciplined approach; advanced concepts reduced to easy-to-use charts, formulas and numerical examples.

Download or read book Competition Car Composites written by Simon McBeath and published by Veloce Publishing. This book was released on 2016-08-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composites have been around since ancient civilisations began making bricks from clay and straw. Glass fibre, carbon fibre and aramid fibres - to name but three - are recent innovations, yet today there are few competition cars that don't have at least some components made out of one or more of these materials. However, while it is well known that glass fibre technology can be used in the home workshop, what may not be so widely realised is that more advanced fibres also lend themselves to DIY methods. This revised edition of Competition Car Composites starts by examining the materials and methods that can be used, explaining basic 'wet' and 'dry' laminating techniques, pattern making and mould construction, and the design and manufacture of components. It then goes on to cover material and technology upgrades, and how more advanced materials can be exploited to achieve improved properties and reduced weight. The use of thermoplastic materials, resin infusion methods, and, especially, 'pre-pregs' in the home workshop, are also discussed, as are the composite techniques used by top racecar constructors.

Download or read book Advanced Composite Materials for Automotive Applications written by Ahmed Elmarakbi and published by John Wiley & Sons. This book was released on 2013-10-09 with total page 487 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry faces many challenges, including increased global competition, the need for higher-performance vehicles, a reduction in costs and tighter environmental and safety requirements. The materials used in automotive engineering play key roles in overcoming these issues: ultimately lighter materials mean lighter vehicles and lower emissions. Composites are being used increasingly in the automotive industry due to their strength, quality and light weight. Advanced Composite Materials for Automotive Applications: Structural Integrity and Crashworthiness provides a comprehensive explanation of how advanced composite materials, including FRPs, reinforced thermoplastics, carbon-based composites and many others, are designed, processed and utilized in vehicles. It includes technical explanations of composite materials in vehicle design and analysis and covers all phases of composite design, modelling, testing and failure analysis. It also sheds light on the performance of existing materials including carbon composites and future developments in automotive material technology which work towards reducing the weight of the vehicle structure. Key features: Chapters written by world-renowned authors and experts in their own fields Includes detailed case studies and examples covering all aspects of composite materials and their application in the automotive industries Unique topic integration between the impact, crash, failure, damage, analysis and modelling of composites Presents the state of the art in composite materials and their application in the automotive industry Integrates theory and practice in the fields of composite materials and automotive engineering Considers energy efficiency and environmental implications Advanced Composite Materials for Automotive Applications: Structural Integrity and Crashworthiness is a comprehensive reference for those working with composite materials in both academia and industry, and is also a useful source of information for those considering using composites in automotive applications in the future.

Download or read book Materials Design and Manufacturing for Lightweight Vehicles written by P.K. Mallick and published by Elsevier. This book was released on 2010-03-01 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Research into the manufacture of lightweight automobiles is driven by the need to reduce fuel consumption to preserve dwindling hydrocarbon resources without compromising other attributes such as safety, performance, recyclability and cost. Materials, design and manufacturing for lightweight vehicles will make it easier for engineers to not only learn about the materials being considered for lightweight automobiles, but also to compare their characteristics and properties.Part one discusses materials for lightweight automotive structures with chapters on advanced steels for lightweight automotive structures, aluminium alloys, magnesium alloys for lightweight powertrains and automotive structures, thermoplastics and thermoplastic matrix composites and thermoset matrix composites for lightweight automotive structures. Part two reviews manufacturing and design of lightweight automotive structures covering topics such as manufacturing processes for light alloys, joining for lightweight vehicles, recycling and lifecycle issues and crashworthiness design for lightweight vehicles.With its distinguished editor and renowned team of contributors, Materials, design and manufacturing for lightweight vehicles is a standard reference for practicing engineers involved in the design and material selection for motor vehicle bodies and components as well as material scientists, environmental scientists, policy makers, car companies and automotive component manufacturers. - Provides a comprehensive analysis of the materials being used for the manufacture of lightweight vehicles whilst comparing characteristics and properties - Examines crashworthiness design issues for lightweight vehicles and further emphasises the development of lightweight vehicles without compromising safety considerations and performance - Explores the manufacturing process for light alloys including metal forming processes for automotive applications

Download or read book Metal Matrix Composites written by Karl U. Kainer and published by John Wiley & Sons. This book was released on 2006-08-21 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the properties of MMCs can be directly designed "into" the material, they can fulfill all the demands set by design engineers. This book surveys the latest results and development possibilities for MMCs as engineering and functional materials, making it of utmost value to all materials scientists and engineers seeking in-depth background information on the potentials these materials have to offer in research, development and design engineering.

Download or read book Structural Composite Materials written by F. C. Campbell and published by ASM International. This book was released on 2010-01-01 with total page 622 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with all aspects of advanced composite materials; what they are, where they are used, how they are made, their properties, how they are designed and analyzed, and how they perform in-service. It covers both continuous and discontinuous fiber composites fabricated from polymer, metal, and ceramic matrices, with an emphasis on continuous fiber polymer matrix composites.

Download or read book Advanced Materials in Automotive Engineering written by Jason Rowe and published by Elsevier. This book was released on 2012-02-21 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry is under constant pressure to design vehicles capable of meeting increasingly demanding challenges such as improved fuel economy, enhanced safety and effective emission control. Drawing on the knowledge of leading experts, Advanced materials in automotive engineering explores the development, potential and impact of using such materials.Beginning with a comprehensive introduction to advanced materials for vehicle lightweighting and automotive applications, Advanced materials in automotive engineering goes on to consider nanostructured steel for automotive body structures, aluminium sheet and high pressure die-cast aluminium alloys for automotive applications, magnesium alloys for lightweight powertrains and automotive bodies, and polymer and composite moulding technologies. The final chapters then consider a range of design and manufacturing issues that need to be addressed when working with advanced materials, including the design of advanced automotive body structures and closures, technologies for reducing noise, vibration and harshness, joining systems, and the recycling of automotive materials.With its distinguished editor and international team of contributors, Advanced materials in automotive engineering is an invaluable guide for all those involved in the engineering, design or analysis of motor vehicle bodies and components, as well as all students of automotive design and engineering. - Explores the development, potential and impact of using advanced materials for improved fuel economy, enhanced safety and effective mission control in the automotive industry - Provides a comprehensive introduction to advanced materials for vehicle lightweighting and automotive applications - Covers a range of design ideas and manufacturing issues that arise when working with advanced materials, including technologies for reducing noise, vibration and harshness, and the recycling of automotive materials

Download or read book Load Introduction in Carbon Fibre Composites for Automotive Applications written by and published by . This book was released on 2002 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book An Introduction to Composite Materials written by D. Hull and published by Cambridge University Press. This book was released on 1996-08-13 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: An updated edition of a textbook on composite materials for undergraduates researchers in materials science and engineering.

Download or read book Composites for Automotive Applications written by C. D. Rudd and published by iSmithers Rapra Publishing. This book was released on 2000 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt: Various factors in the automotive sector have combined to create a favourable climate for the development of materials and fabrication techniques for polymer-based composite body panels and structures. The cond104 in which composites are used within the automotive industry has been reviewed in this report and those materials and processes that are used in the fabrication of components and structures are described in detail. For this reason, this report is essential reading for the composites, plastics industries and the land transport/automotive sectors. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database gives useful references for further reading.

Download or read book Introduction to Composite Materials Design Second Edition written by Ever J. Barbero and published by CRC Press. This book was released on 2010-07-07 with total page 564 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presenting a wealth of completely revised examples and new information, Introduction to Composite Materials Design, Second Edition greatly improves on the bestselling first edition. It incorporates state-of-the-art advances in knowledge and design methods that have taken place over the last 10 years, yet maintains the distinguishing features and vital content of the original. New material in this second edition: Introduces new background topics, including design for reliability and fracture mechanics Revises and updates information on polymer matrices, modern fibers (e.g., carbon nanotubes, Basalt, Vectran) and fiber forms such as textiles/fabrics Includes new information on Vacuum Assisted Resin Transfer Molding (VARTM) Incorporates major advances in prediction of unidirectional-lamina properties Reworks sections on material failure, including the most advanced prediction and design methodologies, such as in situ strength and Mohr-Coulomb criterion, etc. Covers all aspects of preliminary design, relegating finite element analysis to a separate textbook Discusses methodology used to perform damage mechanics analysis of laminated composites accounting for the main damage modes: longitudinal tension, longitudinal compression, transverse tension, in-plane shear, and transverse compression Presents in-depth analysis of composites reinforced with plain, twill, and satin weaves, as well as with random fiber reinforcements Expands the analysis of thin walled beams with newly developed examples and MATLAB® code Addresses external strengthening of reinforced-concrete beams, columns, and structural members subjected to both axial and bending loads The author distributes 78 fully developed examples throughout the book to illustrate the application of presented analysis techniques and design methodology, making this textbook ideally suited for self-study. Requiring no more than senior undergraduate-level understanding of math and mechanics, it remains an invaluable tool for students in the engineering disciplines, as well as for self-studying, practicing engineers.