Download or read book An Introduction to Asset Corrosion Management in the Oil and Gas Industry Third Edition written by Ali Morshed and published by Nace International. This book was released on 2020-09-09 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion management is a rather new concept whose roots go back to the U.K.'s offshore oil and gas industry in the early 2000s. There is a great deal of confusion associated with this concept. To some, CM is a mere synonym for the corrosion engineering concept and discipline, while to others it is an inspection activity that is risk-based.

Download or read book An Introduction to Asset Corrosion Management in the Upstream Offshore Industry written by Ali Morshed and published by Nace International. This book was released on 2011 with total page 105 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Corrosion and Asset Integrity Management for Upstream Installations in the Oil Gas Industry written by Carlos Alberto Palacios and published by Createspace Independent Publishing Platform. This book was released on 2016-11-16 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book tells the thirty-year story of a corrosion/integrity engineer's life experiences through Upstream Installations in the Oil and Gas Industry, corrosion and integrity issues, the manifestations of various forms of corrosion, considerations for assessing corrosion rates, and the application of available mitigation techniques. The installations that are covered in this journey include downhole equipment; wellheads; flowlines (well lines); gathering lines; flow stations (primary separation stations); gas, oil and water treatment facilities; well injection; and ends describing a Corrosion and Asset Integrity MANanagement (CAIMAN) System.

Download or read book Corrosion Control in Petroleum Production Third Edition written by Robert J Franco and published by . This book was released on 2020-09-09 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This greatly updated and expanded third edition of Corrosion Control in Petroleum Production is written for non-experts who have the responsibility for corrosion management of subsurface, surface, and subsea equipment used for producing and processing oil and natural gas. It provides an overview and reference on the different corrosion threats, the methods for controlling corrosion, and the establishment of a management system based on risk and continuous improvement. The authors, Robert Franco and Tim Bieri, have distilled 80 years of personal experience--as well as the experience from multiple reviewers and contributors--into one comprehensive reference. Included are hundreds of photographs, figures, and tables to illustrate the practical aspects and essential theory of corrosion control and materials selection.

Download or read book Corrosion Control in the Oil and Gas Industry written by Sankara Papavinasam and published by Elsevier. This book was released on 2013-10-15 with total page 1021 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effect of corrosion in the oil industry leads to the failure of parts. This failure results in shutting down the plant to clean the facility. The annual cost of corrosion to the oil and gas industry in the United States alone is estimated at $27 billion (According to NACE International)—leading some to estimate the global annual cost to the oil and gas industry as exceeding $60 billion. In addition, corrosion commonly causes serious environmental problems, such as spills and releases. An essential resource for all those who are involved in the corrosion management of oil and gas infrastructure, Corrosion Control in the Oil and Gas Industry provides engineers and designers with the tools and methods to design and implement comprehensive corrosion-management programs for oil and gas infrastructures. The book addresses all segments of the industry, including production, transmission, storage, refining and distribution. - Selects cost-effective methods to control corrosion - Quantitatively measures and estimates corrosion rates - Treats oil and gas infrastructures as systems in order to avoid the impacts that changes to one segment if a corrosion management program may have on others - Provides a gateway to more than 1,000 industry best practices and international standards

Download or read book Corrosion Protection for the Oil and Gas Industry written by Mavis Sika Okyere and published by CRC Press. This book was released on 2019-02-14 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion Protection for the Oil and Gas Industry: Pipelines, Subsea Equipment, and Structures summarizes the main causes of corrosion and requirements for materials protection, selection of corrosion-resistant materials and coating materials commonly used for corrosion protection, and the limitations to their use, application, and repair. This book focuses on the protection of steels against corrosion in an aqueous environment, either immersed in seawater or buried. It also includes guidelines for the design of cathodic protection systems and reviews of cathodic protection methods, materials, installation, and monitoring. It is concerned primarily with the external and internal corrosion protection of onshore pipelines and subsea pipelines, but reference is also made to the protection of other equipment, subsea structures, risers, and shore approaches. Two case studies, design examples, and the author’s own experiences as a pipeline integrity engineer are featured in this book. Readers will develop a high quality and in-depth understanding of the corrosion protection methods available and apply them to solve corrosion engineering problems. This book is aimed at students, practicing engineers, and scientists as an introduction to corrosion protection for the oil and gas industry, as well as to overcoming corrosion issues.

Download or read book Guidance for Corrosion Management in Oil and Gas Production and Processing written by and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Metallurgy and Corrosion Control in Oil and Gas Production written by Robert Heidersbach and published by John Wiley & Sons. This book was released on 2018-09-17 with total page 895 pages. Available in PDF, EPUB and Kindle. Book excerpt: Details the proper methods to assess, prevent, and reduce corrosion in the oil industry using today's most advanced technologies This book discusses upstream operations, with an emphasis on production, and pipelines, which are closely tied to upstream operations. It also examines protective coatings, alloy selection, chemical treatments, and cathodic protection—the main means of corrosion control. The strength and hardness levels of metals is also discussed, as this affects the resistance of metals to hydrogen embrittlement, a major concern for high-strength steels and some other alloys. It is intended for use by personnel with limited backgrounds in chemistry, metallurgy, and corrosion and will give them a general understanding of how and why corrosion occurs and the practical approaches to how the effects of corrosion can be mitigated. Metallurgy and Corrosion Control in Oil and Gas Production, Second Edition updates the original chapters while including a new case studies chapter. Beginning with an introduction to oilfield metallurgy and corrosion control, the book provides in-depth coverage of the field with chapters on: chemistry of corrosion; corrosive environments; materials; forms of corrosion; corrosion control; inspection, monitoring, and testing; and oilfield equipment. Covers all aspects of upstream oil and gas production from downhole drilling to pipelines and tanker terminal operations Offers an introduction to corrosion for entry-level corrosion control specialists Contains detailed photographs to illustrate descriptions in the text Metallurgy and Corrosion Control in Oil and Gas Production, Second Edition is an excellent book for engineers and related professionals in the oil and gas production industries. It will also be an asset to the entry-level corrosion control professional who may have a theoretical background in metallurgy, chemistry, or a related field, but who needs to understand the practical limitations of large-scale industrial operations associated with oil and gas production.

Download or read book Corrosion and Materials in the Oil and Gas Industries written by Reza Javaherdashti and published by CRC Press. This book was released on 2016-04-19 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advancement of methods and technologies in the oil and gas industries calls for new insight into the corrosion problems these industries face daily. With the application of more precise instruments and laboratory techniques as well as the development of new scientific paradigms, corrosion professionals are also witnessing a new era in the way d

Download or read book Guidelines on the Corrosion Management of Offshore Oil and Gas Production Facilities written by and published by . This book was released on 2017 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Corrosion Engineering Third Edition written by Pierre R. Roberge and published by McGraw Hill Professional. This book was released on 2019-07-08 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher's Note: Products purchased from Third Party sellers are not guaranteed by the publisher for quality, authenticity, or access to any online entitlements included with the product. The most complete corrosion control reference on the market―thoroughly revised for the latest advances This fully updated guide offers complete coverage of the latest corrosion-resistant materials, methods, and technologies. Written by a recognized expert on the subject, the book covers all aspects of corrosion damage, including detection, monitoring, prevention, and control. You will learn how to select materials and resolve design issues where corrosion is a factor. Handbook of Corrosion Engineering, Third Edition shows, step by step, how to understand, predict, evaluate, mitigate, and correct corrosion problems. This edition provides a new focus on the management of corrosion problems and draws on methodologies and examples from the 2016 IMPACT report. A new chapter discusses corrosion management across governments and industries. Coverage includes: • The functions and roles of a corrosion engineer • Atmospheric corrosion and mapping atmospheric corrosivity • Corrosion in waste water treatment and in water and soils • Corrosion of reinforced concrete • Microbes and biofouling • High-temperature corrosion • Modeling corrosion processes and life prediction • Corrosion failures • Corrosion maintenance through inspection and monitoring • Corrosion management across governments and industries • Selection and design considerations for engineering materials • Protective coatings and corrosion inhibitors • Cathodic and anodic protection

Download or read book Recommended Practice for Corrosion Management of Pipelines in Oil Gas Production and Transportation written by Bijan Kermani and published by CRC Press. This book was released on 2017-12-02 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: First Published in 2017. Pipeline integrity is key to maintaining operational success, safety and security and minimising harm to the environment. Corrosion is a dominant contributory factor to failures, leaks and integrity threats in pipelines. Therefore, its optimum control within an integrity management framework is paramount for the cost-effective design of facilities and ensuring continued, uninterrupted and safe operations within the expected design life. This recommended practice (RP) is a compendium of current best practices and state-of-the-art knowledge by major operators, engineering contractors and service companies involved in hydrocarbon pro-duction and transportation. The RP incorporates some minimum operational requirements and practices to ensure that when man-aging corrosion in pipelines, fundamental principles are followed. It covers management of corrosion for pipelines carrying hydrocarbons, injection water and/or produced water from design to decommissioning. It is structured to follow the logical steps of a basic corrosion management process and makes references to relevant and available international standards and/or recommended practices. It is intended for use by personnel from the petroleum industry having knowledge of corrosion and materials. It is hoped that this RP will prove to be a key reference document for engineers, suppliers and con-tractors working in the oil and gas industry, paving the way for corrosion-free operation of pipelines with the ultimate goal of improving safety, security and minimising the impact on the environment

Download or read book Corrosion written by L L Shreir and published by Newnes. This book was released on 2013-10-22 with total page 1145 pages. Available in PDF, EPUB and Kindle. Book excerpt: Corrosion, Volume 2: Corrosion Control deals with corrosion and corrosion control. Topics covered range from the design and economic aspects of corrosion to cathodic and anodic protection; pretreatment and design for metal finishing; protective action of metallic coatings; and methods of applying metallic coatings. Corrosion testing, monitoring, and inspection are also considered. This volume is comprised of 13 chapters; the first of which provides an overview of corrosion control, with emphasis on the classification of practical methods of corrosion control. Attention then turns to the economic aspects of corrosion; how corrosion control is implemented in chemical and petrochemical plants; and design considerations to prevent corrosion in buildings and structures. Design in marine engineering and in relation to welding and joining is also discussed. The chapters that follow focus on the principles and practical applications of cathodic and anodic protection; chemical and mechanical pretreatments for metal finishing; and design for corrosion protection by electroplated and paint coatings. Chemical conversion coatings and miscellaneous coatings such as vitreous enamel coatings are also considered. Finally, this book describes the conditioning of the atmosphere to reduce corrosion. Tables and specifications as well as terms and abbreviations are included. This book will be of value to students as well as workers and engineers involved in corrosion and corrosion control.

Download or read book An Introduction to Asset Corrosion Management in the Oil and Gas Industry written by Ali Morshed and published by . This book was released on 2016 with total page 114 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Trends in Oil and Gas Corrosion Research and Technologies written by A. M. El-Sherik and published by Woodhead Publishing. This book was released on 2017-06-09 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: Trends in Oil and Gas Corrosion Research and Technologies: Production and Transmission delivers the most up-to-date and highly multidisciplinary reference available to identify emerging developments, fundamental mechanisms and the technologies necessary in one unified source. Starting with a brief explanation on corrosion management that also addresses today's most challenging issues for oil and gas production and transmission operations, the book dives into the latest advances in microbiology-influenced corrosion and other corrosion threats, such as stress corrosion cracking and hydrogen damage just to name a few. In addition, it covers testing and monitoring techniques, such as molecular microbiology and online monitoring for surface and subsurface facilities, mitigation tools, including coatings, nano-packaged biocides, modeling and prediction, cathodic protection and new steels and non-metallics. Rounding out with an extensive glossary and list of abbreviations, the book equips upstream and midstream corrosion professionals in the oil and gas industry with the most advanced collection of topics and solutions to responsibly help solve today's oil and gas corrosion challenges. - Covers the latest in corrosion mitigation techniques, such as corrosion inhibitors, biocides, non-metallics, coatings, and modeling and prediction - Solves knowledge gaps with the most current technology and discoveries on specific corrosion mechanisms, highlighting where future research and industry efforts should be concentrated - Achieves practical and balanced understanding with a full spectrum of subjects presented from multiple academic and world-renowned contributors in the industry

Download or read book Corrosion Inhibitors in the Oil and Gas Industry written by Viswanathan S. Saji and published by John Wiley & Sons. This book was released on 2020-02-10 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides comprehensive coverage of corrosion inhibitors in the oil and gas industries Considering the high importance of corrosion inhibitor development for the oil and gas sectors, this book provides a thorough overview of the most recent advancements in this field. It systematically addresses corrosion inhibitors for various applications in the oil and gas value chain, as well as the fundamentals of corrosion inhibition and interference of inhibitors with co-additives. Corrosion Inhibitors in the Oil and Gas Industries is presented in three parts. The first part on Fundamentals and Approaches focuses on principles and processes in the oil and gas industry, the types of corrosion encountered and their control methods, environmental factors affecting inhibition, material selection strategies, and economic aspects of corrosion. The second part on Choice of Inhibitors examines corrosion inhibitors for acidizing processes, inhibitors for sweet and sour corrosion, inhibitors in refinery operations, high-temperature corrosion inhibitors, inhibitors for challenging corrosive environments, inhibitors for microbiologically influenced corrosion, polymeric inhibitors, vapor phase inhibitors, and smart controlled release inhibitor systems. The last part on Interaction with Co-additives looks at industrial co-additives and their interference with corrosion inhibitors such as antiscalants, hydrate inhibitors, and sulfide scavengers. -Presents a well-structured and systematic overview of the fundamentals and factors affecting corrosion -Acts as a handy reference tool for scientists and engineers working with corrosion inhibitors for the oil and gas industries -Collectively presents all the information available on the development and application of corrosion inhibitors for the oil and gas industries -Offers a unique and specific focus on the oil and gas industries Corrosion Inhibitors in the Oil and Gas Industries is an excellent resource for scientists in industry as well as in academia working in the field of corrosion protection for the oil and gas sectors, and will appeal to materials scientists, electrochemists, chemists, and chemical engineers.

Download or read book Corrosion in the Petrochemical Industry Second Edition written by and published by ASM International. This book was released on 2015-12-01 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Originally published in 1994, this second edition of Corrosion in the Petrochemical Industry collects peer-reviewed articles written by experts in the field of corrosion that were specifically chosen for this book because of their relevance to the petrochemical industry. This edition expands coverage of the different forms of corrosion, including the effects of metallurgical variables on the corrosion of several alloys. It discusses protection methods, including discussion of corrosion inhibitors and corrosion resistance of aluminum, magnesium, stainless steels, and nickels. It also includes a section devoted specifically to petroleum and petrochemical industry related issues.