Download or read book An Integrated Modeling Approach for Design and Optimization of Ejector Pumps Carrying Two phase Fluid written by Khalid Sarhan Almutairi and published by . This book was released on 2017 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: An ejector pump uses a primary flow as a motive fluid to entrain another fluid, and can work with both incompressible flow and compressible flow, in either as a singlephase or two-phase mixture. Determining the behavior of the two-phase flow inside the ejector with different geometric parameters was the objective of this research. Three approaches were used to predict the performance and the capture the flow behavior inside it. An analytical model used the geometric parameters to calculate the loss factors for the first time and work as a basis for the two-phase flow ejectors. A fluid transportation system was built to verify analytical and numerical predictions and to explore optimum. Using a fitting parameter to capture the flow behavior inside the ejector was crucial for the accuracy of the numerical model. The fitting parameter is a new technique that uses an arbitrary fluid to match the induced air measurements numerically with the ones founded experimentally. To apply the three approaches, nine ejectors were built with different geometric parameters. The nozzle exit diameters are tested at three levels while the length mixing tube are tested at three levels as well. The results reveal that the diffuser angle of 5°, the smallest nozzle exit diameter, and the longest mixing tube result on maximum efficiency and highest induced air. More investigation of two-phase ejectors is important to fully understand flow behavior and to increase efficiency. There are many improvements needed to this work in future.
Download or read book Optimization and Computational Fluid Dynamics written by Dominique Thévenin and published by Springer Science & Business Media. This book was released on 2008-01-08 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: The numerical optimization of practical applications has been an issue of major importance for the last 10 years. It allows us to explore reliable non-trivial configurations, differing widely from all known solutions. The purpose of this book is to introduce the state-of-the-art concerning this issue and many complementary applications are presented.
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1987 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Chemical Engineering Design written by Gavin Towler and published by Elsevier. This book was released on 2012-01-25 with total page 1321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Design, Second Edition, deals with the application of chemical engineering principles to the design of chemical processes and equipment. Revised throughout, this edition has been specifically developed for the U.S. market. It provides the latest US codes and standards, including API, ASME and ISA design codes and ANSI standards. It contains new discussions of conceptual plant design, flowsheet development, and revamp design; extended coverage of capital cost estimation, process costing, and economics; and new chapters on equipment selection, reactor design, and solids handling processes. A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data, and Excel spreadsheet calculations, plus over 150 Patent References for downloading from the companion website. Extensive instructor resources, including 1170 lecture slides and a fully worked solutions manual are available to adopting instructors. This text is designed for chemical and biochemical engineering students (senior undergraduate year, plus appropriate for capstone design courses where taken, plus graduates) and lecturers/tutors, and professionals in industry (chemical process, biochemical, pharmaceutical, petrochemical sectors). New to this edition: Revised organization into Part I: Process Design, and Part II: Plant Design. The broad themes of Part I are flowsheet development, economic analysis, safety and environmental impact and optimization. Part II contains chapters on equipment design and selection that can be used as supplements to a lecture course or as essential references for students or practicing engineers working on design projects. New discussion of conceptual plant design, flowsheet development and revamp design Significantly increased coverage of capital cost estimation, process costing and economics New chapters on equipment selection, reactor design and solids handling processes New sections on fermentation, adsorption, membrane separations, ion exchange and chromatography Increased coverage of batch processing, food, pharmaceutical and biological processes All equipment chapters in Part II revised and updated with current information Updated throughout for latest US codes and standards, including API, ASME and ISA design codes and ANSI standards Additional worked examples and homework problems The most complete and up to date coverage of equipment selection 108 realistic commercial design projects from diverse industries A rigorous pedagogy assists learning, with detailed worked examples, end of chapter exercises, plus supporting data and Excel spreadsheet calculations plus over 150 Patent References, for downloading from the companion website Extensive instructor resources: 1170 lecture slides plus fully worked solutions manual available to adopting instructors
Download or read book Adsorption Heat Pumps written by Daniel B. Boman and published by Springer Nature. This book was released on 2021-05-21 with total page 73 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume introduces the fundamentals of adsorption heat pumps, beginning with the simplest cycle and building to the most complex. Selection of adsorbents and refrigerants, design of adsorption beds and auxiliary heat exchangers, and applications for different designs are all discussed. The book educates engineering students, engineers, and researchers about an environmentally friendly alternative to vapor compression refrigeration systems promising for many applications. The authors cover thermodynamic cycles, working materials for the cycles, and aspects of designing and modeling adsorption heat pumps. Elucidates the various applications of adsorption heat pumps; Illustrates modeling techniques for quickly screening new working materials early in their development; Provides comprehensive review of cycle types, with discussion of the applications for which they are best suited; Appropriate for graduate courses on advanced thermodynamics, design of thermal systems, sustainable energy technology, refrigeration technologies, and thermal control of electronics.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 1016 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis Synthesis and Design of Chemical Processes written by Richard Turton and published by Pearson Education. This book was released on 2008-12-24 with total page 1562 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Leading Integrated Chemical Process Design Guide: Now with New Problems, New Projects, and More More than ever, effective design is the focal point of sound chemical engineering. Analysis, Synthesis, and Design of Chemical Processes, Third Edition, presents design as a creative process that integrates both the big picture and the small details–and knows which to stress when, and why. Realistic from start to finish, this book moves readers beyond classroom exercises into open-ended, real-world process problem solving. The authors introduce integrated techniques for every facet of the discipline, from finance to operations, new plant design to existing process optimization. This fully updated Third Edition presents entirely new problems at the end of every chapter. It also adds extensive coverage of batch process design, including realistic examples of equipment sizing for batch sequencing; batch scheduling for multi-product plants; improving production via intermediate storage and parallel equipment; and new optimization techniques specifically for batch processes. Coverage includes Conceptualizing and analyzing chemical processes: flow diagrams, tracing, process conditions, and more Chemical process economics: analyzing capital and manufacturing costs, and predicting or assessing profitability Synthesizing and optimizing chemical processing: experience-based principles, BFD/PFD, simulations, and more Analyzing process performance via I/O models, performance curves, and other tools Process troubleshooting and “debottlenecking” Chemical engineering design and society: ethics, professionalism, health, safety, and new “green engineering” techniques Participating successfully in chemical engineering design teams Analysis, Synthesis, and Design of Chemical Processes, Third Edition, draws on nearly 35 years of innovative chemical engineering instruction at West Virginia University. It includes suggested curricula for both single-semester and year-long design courses; case studies and design projects with practical applications; and appendixes with current equipment cost data and preliminary design information for eleven chemical processes–including seven brand new to this edition.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1975 with total page 964 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Water R718 Turbo Compressor and Ejector Refrigeration Heat Pump Technology written by Milan N. Šarevski and published by Butterworth-Heinemann. This book was released on 2016-02-03 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water (R718) Turbo Compressor and Ejector Refrigeration/Heat Pump Technology provides the latest information on efficiency improvements, a main topic in recent investigations of thermal energy machines, plants, and systems that include turbo compressors, ejectors, and refrigeration/heat pump systems. This, when coupled with environmental concerns, has led to the application of eco-friendly refrigerants and to a renewed interest in natural refrigerants. Within this context, readers will find valuable information that explores refrigeration and heat pump systems using natural refrigerants, polygeneration systems, the energy efficiency of thermal systems, the utilization of low temperature waste heat, and cleaner production. The book also examines the technical, economic, and environmental reasons of R718 refrigeration/heat pump systems and how they are competitive with traditional systems, serving as a valuable reference for engineers who work in the design and construction of thermal plants and systems, and those who wish to specialize in the use of R718 as a refrigerant in these systems. Describes existing novel R718 turbo compressor and ejector refrigeration/heat pump systems and technologies Provides procedures calculating and optimizing cycles, system components, and system structures Estimates the performance characteristics of the thermal systems Exposes the possibilities for wider applications of R718 systems in the field of refrigeration and heat pumps
Download or read book Rules of Thumb for Chemical Engineers written by Carl Branan and published by Gulf Professional Publishing. This book was released on 2002 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fractionators, separators and accumulators, cooling towers, gas treating, blending, troubleshooting field cases, gas solubility, and density of irregular solids * Hundreds of common sense techniques, shortcuts, and calculations.
Download or read book Bulletin de L Institut International Du Froid written by and published by . This book was released on 2009 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fuel Cell Engineering written by and published by Academic Press. This book was released on 2012-08-14 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel cells are attractive electrochemical energy converters featuring potentially very high thermodynamic efficiency factors. The focus of this volume of Advances in Chemical Engineering is on quantitative approaches, particularly based on chemical engineering principles, to analyze, control and optimize the steady state and dynamic behavior of low and high temperature fuel cells (PEMFC, DMFC, SOFC) to be applied in mobile and stationary systems. Updates and informs the reader on the latest research findings using original reviews Written by leading industry experts and scholars Reviews and analyzes developments in the field
Download or read book Bioprocess Engineering Principles written by Pauline M. Doran and published by Elsevier. This book was released on 1995-04-03 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: The emergence and refinement of techniques in molecular biology has changed our perceptions of medicine, agriculture and environmental management. Scientific breakthroughs in gene expression, protein engineering and cell fusion are being translated by a strengthening biotechnology industry into revolutionary new products and services. Many a student has been enticed by the promise of biotechnology and the excitement of being near the cutting edge of scientific advancement. However, graduates trained in molecular biology and cell manipulation soon realise that these techniques are only part of the picture. Reaping the full benefits of biotechnology requires manufacturing capability involving the large-scale processing of biological material. Increasingly, biotechnologists are being employed by companies to work in co-operation with chemical engineers to achieve pragmatic commercial goals. For many years aspects of biochemistry and molecular genetics have been included in chemical engineering curricula, yet there has been little attempt until recently to teach aspects of engineering applicable to process design to biotechnologists. This textbook is the first to present the principles of bioprocess engineering in a way that is accessible to biological scientists. Other texts on bioprocess engineering currently available assume that the reader already has engineering training. On the other hand, chemical engineering textbooks do not consider examples from bioprocessing, and are written almost exclusively with the petroleum and chemical industries in mind. This publication explains process analysis from an engineering point of view, but refers exclusively to the treatment of biological systems. Over 170 problems and worked examples encompass a wide range of applications, including recombinant cells, plant and animal cell cultures, immobilised catalysts as well as traditional fermentation systems. * * First book to present the principles of bioprocess engineering in a way that is accessible to biological scientists * Explains process analysis from an engineering point of view, but uses worked examples relating to biological systems * Comprehensive, single-authored * 170 problems and worked examples encompass a wide range of applications, involving recombinant plant and animal cell cultures, immobilized catalysts, and traditional fermentation systems * 13 chapters, organized according to engineering sub-disciplines, are groupled in four sections - Introduction, Material and Energy Balances, Physical Processes, and Reactions and Reactors * Each chapter includes a set of problems and exercises for the student, key references, and a list of suggestions for further reading * Includes useful appendices, detailing conversion factors, physical and chemical property data, steam tables, mathematical rules, and a list of symbols used * Suitable for course adoption - follows closely curricula used on most bioprocessing and process biotechnology courses at senior undergraduate and graduate levels.
Download or read book Design and Modeling of Mechanical Systems written by Mohamed Haddar and published by Springer Science & Business Media. This book was released on 2013-03-12 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 5th International Congress on Design and Modeling of Mechanical Systems (CMSM) was held in Djerba, Tunisia on March 25-27, 2013 and followed four previous successful editions, which brought together international experts in the fields of design and modeling of mechanical systems, thus contributing to the exchange of information and skills and leading to a considerable progress in research among the participating teams. The fifth edition of the congress (CMSM ́2013), organized by the Unit of Mechanics, Modeling and Manufacturing (U2MP) of the National School of Engineers of Sfax, Tunisia, the Mechanical Engineering Laboratory (MBL) of the National School of Engineers of Monastir, Tunisia and the Mechanics Laboratory of Sousse (LMS) of the National School of Engineers of Sousse, Tunisia, saw a significant increase of the international participation. This edition brought together nearly 300 attendees who exposed their work on the following topics: mechatronics and robotics, dynamics of mechanical systems, fluid structure interaction and vibroacoustics, modeling and analysis of materials and structures, design and manufacturing of mechanical systems. This book is the proceedings of CMSM ́2013 and contains a careful selection of high quality contributions, which were exposed during various sessions of the congress. The original articles presented here provide an overview of recent research advancements accomplished in the field mechanical engineering.
Download or read book Commercial Supersonic Technology written by National Research Council and published by National Academies Press. This book was released on 2002-02-16 with total page 128 pages. Available in PDF, EPUB and Kindle. Book excerpt: High-speed flight is a major technological challenge for both commercial and business aviation. As a first step in revitalizing efforts by the National Aeronautics and Space Administration (NASA) to achieve the technology objective of high-speed air travel, NASA requested the National Research Council (NRC) to conduct a study that would identify approaches for achieving breakthroughs in research and technology for commercial supersonic aircraft. Commercial Supersonic Technology documents the results of that effort. This report describes technical areas where ongoing work should be continued and new focused research initiated to enable operational deployment of an environmentally acceptable, economically viable commercial aircraft capable of sustained supersonic flight, including flight over land, at speeds up to approximately Mach 2 in the next 25 years or less.
Download or read book NASA SP written by and published by . This book was released on 1984 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Theory and Practice of Vacuum Technology written by Max Wutz and published by . This book was released on 1989-01-01 with total page 667 pages. Available in PDF, EPUB and Kindle. Book excerpt:
