Download or read book An Initial Experimental Study of Instrumented Elastomeric Bridge Bearings During Concrete Pour written by Ning Wang and published by . This book was released on 1997 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Instrumented Elastomeric Bridge Bearings written by Douglas K. Nims and published by . This book was released on 2000 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents the results of tests and analyses performed on elastomeric bridge bearings. The focus of this research was the measurement of bearing deformations in the field and assessment of the feasibility of using instrumented elastomeric bearings to monitor bridge condition. The bearing deformations were successful measured in the field during the deck concrete pour and a static truck test. Shear, compression, rotation, and fatigue tests have been carried out in the laboratory and at the manufacturer's facility. Full scale bearings (shape factor 11) were tested at the manufacturer and installed in the field. Model bearings (shape factor 11 and one-quarter the plan area of the full scale bearings) were tested at the manufacturer and in the laboratory. Test bearings (shape factors 5,7, and 10) were tested in the laboratory. The bearing material was 50 Durometer neoprene. The analyses support the testing and considered the bridge-bearing system. The stiffnesses of the bearings are explicitly included in the analyses. A singular characteristic of this experimental research is the focus on the in-service behavior of the bearings.
Download or read book An Experimental Study of Elastomeric Bridge Bearings with Design Recommendations written by Joseph Vincent Muscarella and published by . This book was released on 1995 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this study was to analyze elastomeric bearing performance on the basis of elastomer hardness, shape factor, reinforcing shim orientation, degree of taper and compressive stress level with the goal of developing a simple design procedure which standardizes as many of those parameters as possible. Particular emphasis was placed on comparing the behavior of flat and tapered bearings. Experimentation included shear, compressive, and rotational stiffness tests, shear and compression fatigue loading, long-term compressive loading, and tests to determine compressive stress limits.
Download or read book Material Study of the Steel Reinforced Elastomeric Bridge Bearings written by Cong Sun (Ph. D.) and published by . This book was released on 2015 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Steel laminated elastomeric bearings are widely used in concrete bridges due to their low cost and long history of good structural performance. However, elastomeric bearings have not been used extensively in steel bridge systems. Compared to concrete bridges, steel bridge systems generally have longer spans and may have significant support skew and horizontally curved geometry that results in significant demands on the bearings at the supports to accommodate rotations and complex bridge movements from both thermal loads and daily truck traffic. For such bridges, more costly pot bearings are normally used. The research described in this dissertation was part of a larger study investigating the possibility of using elastomeric bearings in such higher demand applications. More specifically, the research in this dissertation investigated issues related to material properties of the elastomer in larger bearings designed for higher demand applications. This dissertation first introduces a new testing methodology, referred to as the Dual Shear Test (DST), which is able to measure the elastomer material response in shear for samples cut directly from of bearings with different dimensions. The proposed geometry of the DST specimen significantly reduces the cost and effort compared to the more conventional Quad Shear Test, and also allows the measurement of shear response at very large shear strain levels. Based on a systematic experimental study, the accuracy and reliability of this new testing methodology was demonstrated. Different hyper-elastic material models were investigated in this dissertation that can be used in finite element studies of elastomeric bearings. These models were calibrated based on the new shear test methodology. With these material models, DST results can be interpreted and entered into finite element models. Using the Dual Shear Test, four bearings of different dimensions were tested. The variability of the shear modulus at different locations within the bearings was investigated. These tests were conducted to address concerns that larger bearings may have greater variability in elastomer material properties throughout the bearing. These tests showed there is somewhat greater variability in shear modulus in larger bearings and thicker bearings, although this variability was not significantly larger compared to smaller bearings. Finally, this research also investigated how the shear modulus of the elastomer changes as the temperature decreases. Results of tests showed that the shear modulus increases significantly as temperature decreases. This effect can be significant when analyzing the behavior of bridge bearings under temperature variations.
Download or read book Elastomeric Bearings in High Demand Applications written by Liwei Han and published by . This book was released on 2016 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pot and disk bearings are typically used in high-demand bridge applications where significant demands are imposed on bearings at the supports to accommodate rotations and complex bridge movements from both environmental thermal loads and vehicular traffic. However, past bridge research, design, and installation experience demonstrates that less costly elastomeric bearings are not only easy to install, inspect, and replace, but also more forgiving of installation errors. The use of elastomeric bearings in high-demand applications results in much less structural restraint against bridge thermal deformation than other more sophisticated sliding bearings. Although past bridge design practice includes applications of elastomeric bearings in two steel trapezoidal box girder systems in Central Texas, the use of elastomeric bearings in high-demand application is nevertheless largely impeded by historical and current bearing design provisions at national and state levels that are unduly restrictive for large-sized elastomeric bearings as well as the scantiness of field, laboratory, and numerical investigations on them. This investigation reported in this dissertation is part of a research project including material study, full-scale testing, field monitoring, and finite-element studies, with a focus primarily on finite-element studies of elastomeric bearings in comparison with laboratory and field measurements. A three-dimensional finite-element model capable of simulating the behavior of elastomeric bearings in full-scale compression, shear, and rotation testing was first developed and validated by experimental results from the full-scale testing. More comprehensive parametric finite-element studies of elastomeric layers under axial load and rotational deformation were then carried out leading to the development of a reliable elastomeric bearing design with improved economy and serviceability, based on total shear strain approach. A three-dimensional finite-element study of a continuous curved steel trapezoidal box girder system (IH-35 NB & US-290 EB direct connector) was carried out to investigate the translational movements and rotations imposed on elastomeric bearings under thermal loads with 100-year return period, and validated by instrumentation measurements from field monitoring. Design suggestions were put forward with regard to determining demands on elastomeric bearing s under thermal loads in high-demand applications. A field investigation was finally carried out on elastomeric bearings on the instrumented bridge, two of which were found to be damaged to different extents. The results reveal that the two damaged bearings are subjected to excessive amount of transverse rotation. Further analyses by calculating the maximum shear strain of all bearings using the proposed design approach confirmed that the observed bearing damage is the direct result of the excessive transverse angle of inclination on the concrete bearing seat surface.
Download or read book Highway Research Abstracts written by and published by . This book was released on 1994 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bridge Launching written by Marco Rosignoli and published by Thomas Telford. This book was released on 2002 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: &Quot;This book is an essential purchase for all those involved in bridge construction and innovative building techniques, such as bridge owners, design offices, bridge consultants, and construction equipment suppliers."--BOOK JACKET.
Download or read book Guide Specifications for Seismic Isolation Design written by and published by AASHTO. This book was released on 2010 with total page 63 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edition is based on the work of NCHRP project 20-7, task 262 and updates the 2nd (1999) edition -- P. ix.
Download or read book American Doctoral Dissertations written by and published by . This book was released on 2000 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book LRFD Guide Specifications for the Design of Pedestrian Bridges written by American Association of State Highway and Transportation Officials and published by AASHTO. This book was released on 2009 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Composite Construction in Steel and Concrete IV written by Jerome F. Hajjar and published by . This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection contains 85 papers presented at the Composite Construction in Steel and Concrete IV Conference, held in Banff, Alberta, Canada, May 28-June 2, 2000.
Download or read book Failed Bridges written by Joachim Scheer and published by John Wiley & Sons. This book was released on 2011-08-24 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gilt immer noch, dass ein Bauwerkseinsturz der beste Lehrmeister für den Fortschritt des Bauens ist? Oder, anders formuliert: Ist Bauen dann, wenn wir das Bewährte verlassen und Neues wagen, "Experimentieren"? Über die Ursache von Schadensfällen und Einstürzen, die oft mit dem Verlust von Menschenleben verbunden sind, wird nicht gern öffentlich gesprochen. Aber aus Fehlern kann man lernen. Die Lehren und Erfahrungen aus den Schadensauswertungen führen zu mehr Sicherheit und oft zum Innovationsschub. Die Kenntnis der Schadensursachen ist Voraussetzung für ihre zukünftige Vermeidung. Mit diesem Buch liegt eine systematische Zusammenstellung von über 400 Versagensfällen vor, die in besonderer Weise betrachtet werden: Sie werden nach dem Zeitpunkt ihres Auftretens im Lebenszyklus der Brücke, z. B. im Bauzustand oder im Betrieb, und nach den Schadensereignissen, z. B. Anprall oder Erdbeben, geordnet. Die wichtigsten Ursachen sind: menschliches Versagen, mangelnde Aussteifung, Materialversagen oder Überlastung. Es werden vorwiegend Brückeneinstürze, die in der Literatur wenig oder nach dem Urteil des Verfassers nicht vollständig oder nicht zutreffend behandelt sind, ausführlich analysiert. Mit Akribie gesammelt, kompetent und exzellent aufgearbeitet und mit Mut präsentiert, ergibt dies eine unverzichtbare Erkenntnisquelle für jeden Bauingenieur in der Praxis und für das Studium. Ein Katalog von Regeln wurde erstellt. Seine Beachtung kann helfen, Fehler bei Entwurf, Planung und Ausführung zu vermeiden.
Download or read book Bridge Engineering Handbook written by Wai-Fah Chen and published by CRC Press. This book was released on 2019-09-11 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: First Published in 1999: The Bridge Engineering Handbook is a unique, comprehensive, and state-of-the-art reference work and resource book covering the major areas of bridge engineering with the theme "bridge to the 21st century."
Download or read book Integrated Probabilistic Performance based Evaluation of Benchmark Reinforced Concrete Bridges written by Kevin Rory Mackie and published by . This book was released on 2008 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dams and Public Safety written by Robert B. Jansen and published by . This book was released on 1980 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bridge Engineering written by W.F. Chen and published by CRC Press. This book was released on 2003-02-27 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mitigating the effects of earthquakes is crucial to bridge design. With chapters culled from the best-selling Bridge Engineering Handbook, this volume sets forth the principles and applications of seismic design, from the necessary geotechnical and dynamic analysis background to seismic isolation and energy dissipation, active control, and retrofit
Download or read book Engineering and Design written by Us Army Corps Of Engineers and published by Military Bookshop. This book was released on 1995-06 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: This manual provides guidance on evaluating the condition of the concrete in a structure, relating the condition of the concrete to the underlying cause or causes of that condition, selecting an appropriate repair material and method for any deficiency found, and using the selected materials and methods to repair or rehabilitate the structure. Guidance is also included on maintenance of concrete and on preparation of concrete investigation reports for repair and rehabilitation projects. Considerations for certain specialized types of rehabilitation projects are also given.
