Download or read book An in Vitro Study of Shear and Tensile Bond Strengths Comparing Mechanically and Chemically Bonded Ceramic Brackets with Three Bonding Agents written by Kristian Eric Hyer and published by . This book was released on 1989 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cumulated Index Medicus written by and published by . This book was released on 2000 with total page 1828 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dental Hard Tissues and Bonding written by George Eliades and published by Springer Science & Business Media. This book was released on 2005-12-06 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively reviews bonding to enamel, dentin and cementum and analyses relevant adhesion mechanisms. It is addressed to both the dental researcher and the clinician. Emphasis is placed on the characterization of material interfaces with dental tissues in situ. The volume also stresses the importance of appropriate experimental protocol design in facilitating clinically-relevant research methods, clarifies the mechanisms of adhesion of polymeric materials to hard dental tissues and furnishes a handy reference for routine clinical procedures in restorative and prosthetic dentistry as well as orthodontics. The book introduces important aspects of the chemistry of dental materials and their adaptation to dental hard tissues. It also analyses interfacial phenomena occurring during application of materials, including mechanical properties, and structural-compositional alterations. The text presents the current instrumental approaches in studying related issues and a summary of the current status of theories concerning bonding to dental tissues. This work, in its scope and scientific content, provides an in-depth view of the way in which aesthetic dentistry is currently being practiced.
Download or read book Australian Orthodontic Journal written by and published by . This book was released on 1997 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book In Vitro Shear Torsional and Tensile Bond Strengths of Ceramic Brackets Utilizing Three Adhesive Filler Concentrations written by Alan James Ostertag and published by . This book was released on 1990 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book In Vitro Tensile Bond Strength Comparison of Two Ceramic Brackets Utilizing Three Adhesive Filler Concentrations written by Thomas Joseph Weber and published by . This book was released on 1991 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Index Medicus written by and published by . This book was released on 2003 with total page 2084 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vols. for 1963- include as pt. 2 of the Jan. issue: Medical subject headings.
Download or read book An in Vitro Comparative Study of Shear and Tensile Bond Strengths for Stainless Steel and Ceramic Orthodontic Brackets written by Kirk Tristan Ripley and published by . This book was released on 1988 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Principles in Contemporary Orthodontics written by Silvano Naretto and published by BoD – Books on Demand. This book was released on 2011-11-25 with total page 600 pages. Available in PDF, EPUB and Kindle. Book excerpt: Orthodontics is a fast developing science as well as the field of medicine in general. The attempt of this book is to propose new possibilities and new ways of thinking about Orthodontics beside the ones presented in established and outstanding publications available elsewhere. Some of the presented chapters transmit basic information, other clinical experiences and further offer even a window to the future. In the hands of the reader this book could provide an useful tool for the exploration of the application of information, knowledge and belief to some orthodontic topics and questions.
Download or read book A Comparative Study of Shear Bond Strengths of Different Combinations of Adhesive Systems and a Porcelain Priming Agent when Bonding Ceramic Brackets to Porcelain written by Boyd O. Whitlock and published by . This book was released on 1992 with total page 120 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this study was to compare the bond strengths of three adhesive systems (two-paste, no-mix, and one light-activated) when used alone and combined with a porcelain priming agent to bond ceramic brackets to porcelain surfaces. Sixty porcelain specimens were randomly assigned to the six different treatment groups. One half of the groups were bonded with the porcelain priming agent and one of the adhesive systems and the other half with one of the adhesive systems without the priming agent. The shear bond strengths, expressed in megapascals (MPa), of all specimens were tested, using an Instron testing machine, 10 minutes after being bonded. The surface of the porcelain and the bracket base were examined, using the scanning electron microscope (SEM), to determine the bond failure patterns and check the prcelain surface for the presence of cracks and fractures. Across the three different adhesive systems, mean shear bond strength measurements ranged from 6.3-7.5 MPa when the porcelain primer was used and from 1.8-3.8 when the porcelain primer was not used. There was a statistically significant difference within each adhesive between those samples with the priming agent (mean shear bond strength of 6.5 ± 0.8, 7.5 ± 1.0, and 6.3 ± 1.2) and those without the priming agent (mean shear bond strength of 3.8 ± 0.4, 1.8 ± 1.8, nad 2.6 ± 1.3) (p ≤ 0.5). Differences between the three adhesives were not statistically significant (p ≤ .05). Evaluation of the bond failure sites, using the SEM, revealed failures at the porcelain-adhesive interface, within the adhesive and at the bracket-adhseive interface for the porcelain primer samples. The samples that were bonded with the different adhesives only displayed a failure exclusively at the porcelain-adhesive interface. The failure patterns were verified by qualitative energy dispersive x-ray analysis (EDS). It can be concluded from this study that using any of the three adhesive systems combined with the porcelain priming agent will provide sufficient bond strength to withstand normal orthodontic forces and not damage the surface of the porcelain when debonded.
Download or read book An in Vitro Comparison of Shear and Tensile Bond Strengths for Orthodontic Brackets Directly Bonded to Enamel Porcelain and Gold written by Mark Allen Stieg and published by . This book was released on 1987 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Effect of Surface Treatments and Bonding Agents on the Shear Bond Strengths of Orthodontic Brackets Bonded to Aged Composite Resin Restorations written by Matthew Yun Sun Tse and published by . This book was released on 2013 with total page 108 pages. Available in PDF, EPUB and Kindle. Book excerpt: Objective: To compare the mean bond strengths and mode of bond failure, in vitro, of five bonding systems (MIP 1, Plastic Conditioner 2, Assure 2, Scotchbond 3, and Transbond XT 1), when bonding an orthodontic bracket to an artificially-aged composite resin restoration, with and without mechanical surface preparation with a diamond bur. Methods: Class V buccal composite resin restorations were prepared in 240 upper right central incisor dentoform teeth. The restorations were artificially age d for 35 days, bonded with metal brackets, stored in distilled water at 37°C for 30 days, thermocycled for 500 cycles, and subsequently debonded with an Instron universal testing machine. Results: The mean bond strengths for Transbond, MIP, Plastic Conditioner, Assure, and Scotchbond groups were 12.1, 12.3, 13.3, 17.2, and 17.7 MPa respectively. The mean bond strengths for Transbond+Diamond, MIP+Diamond, Plastic Conditioner+Diamond, Assure+Diamond, and Scotchbond+Diamond groups were 18.5, 16.4, 19.1, 19.5, and 20.7 MPa respectively. ANOVA revealed a statistically significant diffe rence (P d"0.05) among the groups. Conclusions: Mechanically roughening the surface of a composite resin restoration with a diamond bur, provided significantly greater bond strengths, regardless of the bonding resin used. However, Assure and Scotchbond, without diamond bur preparation, provided similar bond strengths to Transbond, MIP and Plastic Conditioner, with diamond bur preparation. 1. 3M Unitek, Monrovia CA 2. Reliance Orthodontic Products, Itasca IL 3. 3M ESPE, St. Paul MN.
Download or read book In vitro Tensile Bond Strength Comparison of Metal and Ceramic Brackets Using Autopolymerizing and Light cured Resins written by Paul Raymond Ostertag and published by . This book was released on 1989 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Orthodontic Materials written by Wiliam A. Brantley and published by Thieme. This book was released on 2011-01-01 with total page 513 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this important new textbook all scientific and clinical aspects of orthodontic materials are described.Recent developments in science and technology have led to the introduction of a plethora of new orthodontic products. This work serves as an excellent source of information for a field that requires knowledge of basic elements of materials science, engineering, chemistry, and physics, as well as clinical orthodontics. The subject has been part of graduate orthodontic education for almost three decades. Besides servicing the orthodontic training programs, the book also - investigates the interactions of orthodontic materials with other dental materials as well as hard tissues in the oral cavity,- gives a background to allow for proper material selection for efficient orthodontic mechanics,- treats the issues of biocompatibility, cytotoxicity and mutagenicity of materials.
Download or read book Shear and Tensile Bond Strengths of Ceramic Orthodontic Brackets written by Bruce Allan Evans and published by . This book was released on 1991 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Indirect Bonding Method written by Stéphanie H. Mai and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fundamentals of Fixed Prosthodontics written by Herbert T. Shillingburg and published by . This book was released on 1981 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt:
