Download or read book AN IMPROVED METHOD FOR THE IDENTIFICATION AND INVERSION OF MULTI MODE RAYLEIGH SURFACE WAVE DISPERSION COLLECTED FROM NON UNIFORM ARRAYS UTILIZING A MOVING SOURCE APPROACH written by Scott Phillip Stovall and published by . This book was released on 2010 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: An improved method using a moving source approach is utilized in the analysis of Rayleigh surface waves for the accurate identification of higher mode propagation used in inversion. Two non invasive surface wave methods, Multi- station Analysis of Surface Waves (MASW) and Refraction Microtremor (ReMi) were used for the construction of composite dispersion curves representing the relationship of Rayleigh phase velocity (VR) with frequency. Multiple tests were executed with source offsets increasing with each successive test in order to account for near field effects and higher mode attenuation levels. The resulting dispersions were combined to form a composite dispersion which effectively maps all participating modes of propagation. The inversion was executed using a genetic algorithm (GA) which takes advantage of the Rayleigh forward problem. The results show good ability to identify intermediate high and low velocity layers and agree well with downhole results. .
Download or read book Monitoring the Comprehensive Nuclear Test Ban Treaty Surface Waves written by Anatoli L. Levshin and published by Springer Science & Business Media. This book was released on 2001-09-01 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: On September 1996, the United Nations General Assembly adopted the Comprehensive Nuclear-Test-Ban Treaty (CTBT), prohibiting nuclear explosions worldwide, in all environments. The treaty calls for a global verification system, including a network of 321 monitoring stations distributed around the globe, a data communications network, an international data center (IDC), and on-site inspections to verify compliance. Seismic methods play the lead role in monitoring the CTBT. This volume concentrates on the measurement and use of surface waves in monitoring the CTBT. Surface waves have three principal applications in CTBT monitoring: to help discriminate nuclear explosions from other sources of seismic energy, to provide mathematical characterizations of the seismic energy that emanates from seismic sources, and to be used as data in inversion for the seismic velocity structure of the crust and uppermost mantle for locating small seismic events regionally. The papers in this volume fall into two general categories: the development and/or application of methods to summarize information in surface waves, and the use of these summaries to advance the art of surface-wave identification, measurement, and source characterization. These papers cut across essentially all of the major applications of surface waves to monitoring the CTBT. This volume therefore provides a general introduction to the state of research in this area and should be useful as a guide for further exploration.
Download or read book Surface Wave Methods for Near Surface Site Characterization written by Sebastiano Foti and published by CRC Press. This book was released on 2014-08-21 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Develop a Greater Understanding of How and Why Surface Wave Testing Works Using examples and case studies directly drawn from the authors’ experience, Surface Wave Methods for Near-Surface Site Characterization addresses both the experimental and theoretical aspects of surface wave propagation in both forward and inverse modeling. This book accents the key facets associated with surface wave testing for near-surface site characterization. It clearly outlines the basic principles, the theoretical framework and the practical implementation of surface wave analysis. In addition, it also describes in detail the equipment and measuring devices, acquisition techniques, signal processing, forward and inverse modeling theories, and testing protocols that form the basis of modern surface wave techniques. Review Examples of Typical Applications for This Geophysical Technique Divided into eight chapters, the book explains surface wave testing principles from data measurement to interpretation. It effectively integrates several examples and case studies illustrating how different ground conditions and geological settings may influence the interpretation of data measurements. The authors accurately describe each phase of testing in addition to the guidelines for correctly performing and interpreting results. They present variants of the test within a consistent framework to facilitate comparisons, and include an in-depth discussion of the uncertainties arising at each stage of surface wave testing. Provides a comprehensive and in-depth treatment of all the steps involved in surface wave testing Discusses surface wave methods and their applications in various geotechnical conditions and geological settings Explains how surface wave measurements can be used to estimate both stiffness and dissipative properties of the ground Addresses the issue of uncertainty, which is often an overlooked problem in surface wave testing Includes examples with comparative analysis using different processing techniques and inversion algorithms Outlines advanced applications of surface wave testing such as joint inversion, underwater investigation, and Love wave analysis Written for geotechnical engineers, engineering seismologists, geophysicists, and researchers, Surface Wave Methods for Near-Surface Site Characterization offers practical guidance, and presents a thorough understanding of the basic concepts.
Download or read book Inverse Problem Theory and Methods for Model Parameter Estimation written by Albert Tarantola and published by SIAM. This book was released on 2005-01-01 with total page 349 pages. Available in PDF, EPUB and Kindle. Book excerpt: While the prediction of observations is a forward problem, the use of actual observations to infer the properties of a model is an inverse problem. Inverse problems are difficult because they may not have a unique solution. The description of uncertainties plays a central role in the theory, which is based on probability theory. This book proposes a general approach that is valid for linear as well as for nonlinear problems. The philosophy is essentially probabilistic and allows the reader to understand the basic difficulties appearing in the resolution of inverse problems. The book attempts to explain how a method of acquisition of information can be applied to actual real-world problems, and many of the arguments are heuristic.
Download or read book Pre failure Deformation Characteristics of Geomaterials written by Jamiolkowski and published by CRC Press. This book was released on 2001 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second of two volumes from the 1999 conference (v.1 was published in 1999) makes available the opening lecture on pre-failure behavior of soils as construction materials, as well as 24 contributions on various themes of the conference, laboratory tests, in situ tests, stress-strain behavior, applications and case histories. Some specific topics include time-dependent deformation characteristics of stiff geomaterials, boundary value problems in geotechnical engineering, and the effect of reinforcement due to choice of geogrid. There is no subject index. c. Book News Inc.
Download or read book Numerical Optimization written by Joseph-Frédéric Bonnans and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 421 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book starts with illustrations of the ubiquitous character of optimization, and describes numerical algorithms in a tutorial way. It covers fundamental algorithms as well as more specialized and advanced topics for unconstrained and constrained problems. This new edition contains computational exercises in the form of case studies which help understanding optimization methods beyond their theoretical description when coming to actual implementation.
Download or read book Forward and Inverse Modeling of Rayleigh Waves for Near Surface Investigation written by Swastika B. Nevaskar and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Seismic Wave Propagation in Stratified Media written by Brian Kennett and published by ANU E Press. This book was released on 2009-05-01 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Seismic Wave Propagation in Stratified Media presents a systematic treatment of the interaction of seismic waves with Earth structure. The theoretical development is physically based and is closely tied to the nature of the seismograms observed across a wide range of distance scales - from a few kilometres as in shallow reflection work for geophysical prospecting, to many thousands of kilometres for major earthquakes. A unified framework is presented for all classes of seismic phenomena, for both body waves and surface waves. Since its first publication in 1983 this book has been an important resource for understanding the way in which seismic waves can be understood in terms of reflection and transmission properties of Earth models, and how complete theoretical seismograms can be calculated. The methods allow the development of specific approximations that allow concentration on different seismic arrivals and hence provide a direct tie to seismic observations.
Download or read book Quantitative Seismology written by Keiiti Aki and published by . This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition of the classic text by Aki and Richards has at last been updated throughout to systematically explain key concepts in seismology. Now in one volume, the book provides a unified treatment of seismological methods that will be of use to advanced students, seismologists, and scientists and engineers working in all areas of seismology.
Download or read book Active Geophysical Monitoring written by and published by Elsevier. This book was released on 2010-03-05 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Active geophysical monitoring is an important new method for studying time-evolving structures and states in the tectonically active Earth's lithosphere. It is based on repeated time-lapse observations and interpretation of rock-induced changes in geophysical fields periodically excited by controlled sources. In this book, the results of strategic systematic development and the application of new technologies for active geophysical monitoring are presented. The authors demonstrate that active monitoring may drastically change solid Earth geophysics, through the acquisition of substantially new information, based on high accuracy and real-time observations. Active monitoring also provides new means for disaster mitigation, in conjunction with substantial international and interdisciplinary cooperation. - Introduction of a new concept - Most experienced authors in the field - Comprehensiveness
Download or read book The Microtremor Survey Method written by Hiroshi Okada and published by SEG Books. This book was released on 2003 with total page 150 pages. Available in PDF, EPUB and Kindle. Book excerpt: Describes the nature of the microtremor noise field, the use of appropriate surface arrays of geophones, and the two principal classes of array-processing techniques, high-resolution beamforming and the spatial autocorrelation method (SPAC). This is the first comprehensive textbook of the microtremor survey method written in English.
Download or read book Improved Surface Wave Detection and Measurement Using Phase Matched Filtering with a Global One Degree Dispersion Model written by and published by . This book was released on 2001 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary goal of this project is to improve the capability to identify and detect surface waves for the purpose of earthquake/explosion discrimination. We are developing improved, higher resolution earth and dispersion models. The models consist of approximately 600 distinct crust and upper mantle structures, with surface layering and/or ocean depths that vary on a one-degree grid. There are a total of 64,800 earth models and dispersion curves, but the tomographic inversion is performed only for the 600 distinct crust and upper mantle models, with the shallow structure constrained by other information. The data set used in the inversion now consists of approximately 548,000 phase and group velocity dispersion measurements obtained from a variety of sources. Surface sediments are defined using the global sediment maps of Laske and Masters (1997), and ocean bathymetry is defined using the Etopo5 topographic data set. Automatic identification of surface waves at the International Data Centre is currently performed by narrow-band filtering the data at several frequencies, and then comparing the arrival times with a regionalized dispersion model. We have implemented and tested a new procedure in which we first phasematch filter the data and then apply narrow-band filters to the compressed waveform and use a detection test similar to the current test. This allows us to take advantage of the improved signal-to-noise ratio of the phase-match filtered waveforms, while retaining the robustness of narrow-band filtering for frequency dependent signal identification. After phase-matched filtering, the predicted arrival time is zero at all frequencies, so we test to see if the arrivals are within a time window similar to that used in the existing test. To test the procedure, we processed the same data set using five-degree and one-degree models with and without phase-matched filtering.
Download or read book The Solution of the Inverse Problem in Geophysical Interpretation written by R. Cassinis and published by Springer Science & Business Media. This book was released on 2013-03-13 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: As is apparent from the table of contents, the lectures at the Third Course of the International School of Applied Geophysics, Erice, March 27-April 4, 1980 (the first part of this volume) dealt with several applications of inversion to different geophy sical methods. For every field, the more general lectures come first, followed by those aimed at more specialized objectives. Not all topics are covered and the coverage is not uniform. The seismological section (especially the seismic reflection methods) is the most developed, and this is only partly due to the actual state of the art. Unfortunately, only abstracts are available for two of the lectures. The second part of the volume contains some short notes and contributions presented either by the lecturers themselves or by other participants. They do not necessarily deal with the process of inversion itself but with the preparation and meaning of the data to be inverted or with some original treatments of problems that were discussed in the afternoon sessions. The discussion sessions and the round table that followed the lectures were essential to the success of the Course and to an understanding ot the difterent perspectives of the various specialists. I hope that the group of very brilliant and willing geophysi cists that made the meeting so interesting will stay ~n touch, grow closer, and meet again. Close scientific cooperation among them could contribute much to the "unification" of geophysical science.
Download or read book Radiative Processes in Astrophysics written by George B. Rybicki and published by John Wiley & Sons. This book was released on 2008-09-26 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Radiative Processes in Astrophysics: This clear, straightforward, and fundamental introduction is designed to present-from a physicist's point of view-radiation processes and their applications to astrophysical phenomena and space science. It covers such topics as radiative transfer theory, relativistic covariance and kinematics, bremsstrahlung radiation, synchrotron radiation, Compton scattering, some plasma effects, and radiative transitions in atoms. Discussion begins with first principles, physically motivating and deriving all results rather than merely presenting finished formulae. However, a reasonably good physics background (introductory quantum mechanics, intermediate electromagnetic theory, special relativity, and some statistical mechanics) is required. Much of this prerequisite material is provided by brief reviews, making the book a self-contained reference for workers in the field as well as the ideal text for senior or first-year graduate students of astronomy, astrophysics, and related physics courses. Radiative Processes in Astrophysics also contains about 75 problems, with solutions, illustrating applications of the material and methods for calculating results. This important and integral section emphasizes physical intuition by presenting important results that are used throughout the main text; it is here that most of the practical astrophysical applications become apparent.
Download or read book Time Series Analysis and Inverse Theory for Geophysicists written by David Gubbins and published by Cambridge University Press. This book was released on 2004-03-18 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique textbook provides the foundation for understanding and applying techniques commonly used in geophysics to process and interpret modern digital data. The geophysicist's toolkit contains a range of techniques which may be divided into two main groups: processing, which concerns time series analysis and is used to separate the signal of interest from background noise; and inversion, which involves generating some map or physical model from the data. These two groups of techniques are normally taught separately, but are here presented together as parts I and II of the book. Part III describes some real applications and includes case studies in seismology, geomagnetism, and gravity. This textbook gives students and practitioners the theoretical background and practical experience, through case studies, computer examples and exercises, to understand and apply new processing methods to modern geophysical datasets. Solutions to the exercises are available on a website at http://publishing.cambridge.org/resources/0521819652
Download or read book Seismic Ambient Noise written by Nori Nakata and published by Cambridge University Press. This book was released on 2019-03-21 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of seismic ambient noise, covering observations, physical origins, modelling, processing methods and applications in imaging and monitoring.
Download or read book The Seismic Wavefield Volume 1 Introduction and Theoretical Development written by B. L. N. Kennett and published by Cambridge University Press. This book was released on 2001-11-12 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a guide to understanding of seismograms for graduate students, researchers, professionals in academia and the petroleum industry.
