Download or read book Fundamentals of Fuel Injection and Emission in Two Stroke Engines written by Wadysaw Mitianiec and published by Nova Science Publishers. This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The main goal of the book is the presentation of the last theoretical and experimental works concerning fuel injection systems, mainly in small power two-stroke engines as well as in marine engines. This book includes thirteen chapters devoted to the processes of fuel injection and the combustion that takes place in a stratified charge within the cylinders of two-stroke engines. In the first two chapters, the division into different injection systems in two-stroke engines and each injection system is briefly described. Various theoretical and practical solutions of fueling system designs are described. In Chapter Three, mathematical models, the spatial movement of gas in the cylinder and the combustion chamber are introduced, taking into account the turbulence of the charge. Chapter Four relates to the behavior of fuel injected into the gaseous medium, including evaporation processes, disintegration and processes occurring while the fuel drops connect with the wall. The next section describes the zero-dimensional model of fuel injection in two-stroke engines along with examples of numerical calculations. The sixth chapter is devoted to CFD multi-dimensional models of movement and evaporation of the fuel in a closed gaseous medium, occurring also in other engine types. Chapter Seven describes a two-zone model of the combustion process and the effect of the geometry of the combustion chamber on the flame propagation with a simplified verification model of combustion. Chapter Eight compares the propagation phase of gas and liquid fuels concerning direct fuel injection as well as the direct fuel injection from the cylinder head and the thermodynamic parameters of the charge. The formation of the components during the combustion process in the direct fuel injection two-stroke engine was obtained by numerical calculations and results are discussed in Chapter Nine. Chapter Ten describes the parameters of the two-stroke engine with a direct fuel injection carried out at the Cracow University of Technology. Additionally, the chapter presents CFD simulations of fuel propagation and combustion processes, taking into account the formation of toxic components and exhaust gas emission. The processes of two direct rich mixture injection systems FAST and RMIS developed in CUT are presented in Chapter Eleven. Miscellaneous problems of direct fuel injection, such as characteristics of fuel injectors, problems of direct gaseous fuel injection, and the application of fuelling systems in outboard engines and snowmobile vehicles are presented in Chapter Twelve. A comparison of working parameters in two- and four stroke engines is also mapped out. The last chapters contain the final conclusions and remarks concerning fuel injection and emission of exhaust gases in small two-stroke engines. This book is a comprehensive monograph on fuel injection. The author presents a series of theoretical and design information from his own experience and on the basis of the works of other authors. The main text intends to direct fuel injection with respect to gas motion in the combustion chamber and influence the injection parameters for exhaust emission. The book presents its own theoretical work and experimental tests concerning a two-stroke gasoline engine with electrically controlled direct fuel injection. The book describes the processes of a general nature also occurring in other types of engines and presents a comparison of different injection systems on working parameters and gas emission. The book contains 294 images, 290 equations and 16 tables obtained from the CFD simulation and experimental works.
Download or read book Two Stroke Cycle Engine written by JohnB. Heywood and published by Routledge. This book was released on 2017-11-01 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses the two-stroke cycle internal combustion engine, used in compact, lightweight form in everything from motorcycles to chainsaws to outboard motors, and in large sizes for marine propulsion and power generation. It first provides an overview of the principles, characteristics, applications, and history of the two-stroke cycle engine, followed by descriptions and evaluations of various types of models that have been developed to predict aspects of two-stroke engine operation.
Download or read book HCCI and CAI Engines for the Automotive Industry written by Hua Zhao and published by CRC Press. This book was released on 2007-09-10 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: Homogeneous charge compression ignition (HCCI)/controlled auto-ignition (CAI) has emerged as one of the most promising engine technologies with the potential to combine fuel efficiency and improved emissions performance, offering reduced nitrous oxides and particulate matter alongside efficiency comparable with modern diesel engines. Despite the considerable advantages, its operational range is rather limited and controlling the combustion (timing of ignition and rate of energy release) is still an area of on-going research. Commercial applications are, however, close to reality. HCCI a.
Download or read book I C Engines And Combustion written by and published by Allied Publishers. This book was released on with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Internal Combustion Engineering Science Technology written by P.M. Weaving and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 874 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sir Diarmuid Downs, CBE, FEng, FRS Engineering is about designing and making marketable artefacts. The element of design is what principally distinguishes engineering from science. The engineer is a creator. He brings together knowledge and experience from a variety of sources to serve his ends, producing goods of value to the individual and to the community. An important source of information on which the engineer draws is the work of the scientist or the scientifically minded engineer. The pure scientist is concerned with knowledge for its own sake and receives his greatest satisfaction if his experimental observations fit into an aesthetically satisfying theory. The applied scientist or engineer is also concerned with theory, but as a means to an end. He tries to devise a theory which will encompass the known experimental facts, both because an all embracing theory somehow serves as an extra validation of the facts and because the theory provides us with new leads to further fruitful experimental investigation. I have laboured these perhaps rather obvious points because they are well exemplified in this present book. The first internal combustion engines, produced just over one hundred years ago, were very simple, the design being based on very limited experimental information. The current engines are extremely complex and, while the basic design of cylinder, piston, connecting rod and crankshaft has changed but little, the overall performance in respect of specific power, fuel economy, pollution, noise and cost has been absolutely transformed.
Download or read book Introduction to Internal Combustion Engines written by Richard Stone and published by Bloomsbury Publishing. This book was released on 2017-09-16 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its fourth edition, this textbook remains the indispensable text to guide readers through automotive or mechanical engineering, both at university and beyond. Thoroughly updated, clear, comprehensive and well-illustrated, with a wealth of worked examples and problems, its combination of theory and applied practice aids in the understanding of internal combustion engines, from thermodynamics and combustion to fluid mechanics and materials science. This textbook is aimed at third year undergraduate or postgraduate students on mechanical or automotive engineering degrees. New to this Edition: - Fully updated for changes in technology in this fast-moving area - New material on direct injection spark engines, supercharging and renewable fuels - Solutions manual online for lecturers
Download or read book Design and Simulation of Two Stroke Engines written by Gordon Blair and published by SAE International. This book was released on 1996-02-01 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Simulation of Two-Stroke Engines is a unique hands-on information source. The author, having designed and developed many two-stroke engines, offers practical and empirical assistance to the engine designer on many topics ranging from porting layout, to combustion chamber profile, to tuned exhaust pipes. The information presented extends from the most fundamental theory to pragmatic design, development, and experimental testing issues. Chapters cover: Introduction to the Two-Stroke Engine Combustion in Two-Stroke Engines Computer Modeling of Engines Reduction of Fuel Consumption and Exhaust Emissions Reduction of Noise Emission from Two-Stroke Engines and more
Download or read book Fuel Injection in Spark ignition Otto Cycle Engines written by Texaco, Inc and published by . This book was released on 1943 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Alternative Diesel Fuels written by Daniel J Holt and published by SAE International. This book was released on 2004-01-01 with total page 279 pages. Available in PDF, EPUB and Kindle. Book excerpt: A key topic of many technical discussions has been the development of alternative fuels to power the compression ignition engine. Reasons for this include the desire to reduce the dependency on petroleum-based fuel and, at the same time, to reduce the particulate matter (PM) and NOx emissions. Also, there has been interest generated in the diesel engine because of the reduction in greenhouse gases that has been proposed during the 2008-2012 time frame in Europe and the regulations that affect diesel engines in the United States.
Download or read book Recent Advances in Mechanical Engineering written by Seshadev Sahoo and published by Springer Nature. This book was released on with total page 739 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Report of Investigations written by and published by . This book was released on 1971 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1970 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book A Selected Bibliography on Alcohol Fuels written by Solar Energy Research Institute. Technical Information Office and published by . This book was released on 1982 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bioenergy Resources and Technologies written by Abul Kalam Azad and published by Academic Press. This book was released on 2021-03-10 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bioenergy Resources and Technologies presents advanced approaches and applications of bioenergy resources, with a strong focus on environmental sustainability. Chapters on the applications of bioenergy, the implementation of bioenergy as an alternative fuel, and future energy security make this an invaluable and unique resource to further advance the field. This book provides new information and novel techniques across a variety of bioenergy applications, with the book's authors addressing key uses for bioenergy resources as an alternative fuel. Various case studies and examples help demonstrate meaning and provide additional clarity. Social and economic aspects are included for each technology discussed, along with a number of research works and their findings in a diverse mix of areas including energy, environmental science, biotechnology, chemical engineering and mechanical engineering. Researchers and professionals in these disciplines will gain knowledge on the underlying concepts, technologies, fuel applications and solutions to global environmental issues using bioenergy resources. Presents technical and social issues surrounding the latest bioenergy technologies Explores solutions to global sustainability goals through bioenergy applications and the future of energy security Includes experimental investigations of engine performance, emissions and combustion phenomena using different types of oxygenated fuel
Download or read book New Generation of Two St written by Pierre Duret and published by Editions OPHRYS. This book was released on with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Direct Injection Combustion Engine Technologies and Development written by H Zhao and published by Elsevier. This book was released on 2009-12-18 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 2 of the two-volume set Advanced direct injection combustion engine technologies and development investigates diesel DI combustion engines, which despite their commercial success are facing ever more stringent emission legislation worldwide. Direct injection diesel engines are generally more efficient and cleaner than indirect injection engines and as fuel prices continue to rise DI engines are expected to gain in popularity for automotive applications. Two exclusive sections examine light-duty and heavy-duty diesel engines. Fuel injection systems and after treatment systems for DI diesel engines are discussed. The final section addresses exhaust emission control strategies, including combustion diagnostics and modelling, drawing on reputable diesel combustion system research and development. - Investigates how HSDI and DI engines can meet ever more stringent emission legislation - Examines technologies for both light-duty and heavy-duty diesel engines - Discusses exhaust emission control strategies, combustion diagnostics and modelling
Download or read book ISOM 2013 Proceedings GIAP Journals India written by Global Institutes Amritsar and University of Mauritius and published by GIAP Journals. This book was released on with total page 461 pages. Available in PDF, EPUB and Kindle. Book excerpt:
