Download or read book Papers Presented at the Meeting written by American Chemical Society. Division of Polymer Chemistry and published by . This book was released on 2000 with total page 948 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Polymer Particles written by Masayoshi Okubo and published by Springer Science & Business Media. This book was released on 2005-02-10 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this special volume on polymer particles, recent trends and developments in the synthesis of nano- to micron-sized polymer particles by radical polymerization (Emulsion, Miniemulsion, Microemulsion, and Dispersion Polymerizations) of vinyl monomers in environmentally friendly heterogeneous aqueous and supercritical carbon dioxide fluid media are reviewed by prominent worldwide researchers. In addition to the important challenges and possibilities with regards to design and preparation of functionalized polymer particles of controlled size, the topics described are of great current interest due to the increased awareness of environmental issues.

Download or read book Functional Polymers by Post Polymerization Modification written by Patrick Theato and published by John Wiley & Sons. This book was released on 2013-02-12 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: In modern polymer science a variety of polymerization methods for the direct synthesis of polymers bearing functional groups are known. However, there is still a large number of functional groups that may either completely prevent polymerization or lead to side reactions. Post-polymerization modification, also known as polymer-analogous modification, is an alternative approach to overcome these limitations. It is based on the polymerization of monomers with functional groups that are inert towards the polymerization conditions but allow a quantitative conversion in a subsequent reaction step yielding a broad range of other functional groups. Thus, diverse libraries of functional polymers with identical average degrees of polymerization but variable side chain functionality may easily be generated. Filling the gap for a book dealing with synthetic strategies and recent developments, this volume provides a comprehensive and up-to-date overview of the field of post-polymerization modification. As such, the international team of expert authors covers a wide range of topics, including new synthetic techniques utilizing different reactive groups for post-polymerization modifications with examples ranging from modification of biomimetic and biological polymers to modification of surfaces. With its guidelines this is an indispensable and interdisciplinary reference for scientists working in both academic and industrial polymer research.

Download or read book Polymeric Dispersions Principles and Applications written by J.M. Asua and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive and up to date survey of the science and technology of polymeric dispersions. The book discusses the kinetics and mechanisms of polymerization in dispersed media, examines the processes controlling particle morphology, presents both off-line and on-line methods for the characterization of polymer colloids, considers reactor engineering and control, and covers a wide variety of applications, such as latex paint formulations, encapsulation of inorganic particles, reactive latexes, adhesives, paper coating, and biomedical and pharmaceutical applications. Audience: A valuable resource for scientists and engineers, academic and industrial, who are involved in the manufacture or application of polymeric dispersions.

Download or read book Silicon in Polymer Synthesis written by H.R. Kricheldorf and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: Silicon in Polymer Synthesis gives the first concise overview of silicon used for the synthesis and modification of polymers. The first section gives an introduction to the topic. The subsequent chapters detail the current status both from the basic research as well as from the industrial application points of view.

Download or read book Introduction to Industrial Polypropylene written by Dennis B. Malpass and published by John Wiley & Sons. This book was released on 2012-07-02 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introductory text is an important resource for new engineers, chemists, students, and chemical industry personnel to understand the technical aspects of polypropylene which is the 2nd largest synthetics polymer in manufactured output. The book considers the following topics: What are the principal types of polypropylene and how do they differ? What catalysts are used to produce polypropylene and how do they function? What is the role of cocatalysts and how have they evolved over the years? How are industrial polypropylene catalysts tested and the resultant polymer evaluated? What processes are used in the manufacture of polypropylene? What are the biopolymer alternatives to polypropylene? What companies are the major industrial manufacturers of polypropylene? What is the environmental fate of polypropylene?

Download or read book Extractive Metallurgy of Niobium written by A.K. Suri and published by Routledge. This book was released on 2017-11-13 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The growth and development witnessed today in modern science, engineering, and technology owes a heavy debt to the rare, refractory, and reactive metals group, of which niobium is a member. Extractive Metallurgy of Niobium presents a vivid account of the metal through its comprehensive discussions of properties and applications, resources and resource processing, chemical processing and compound preparation, metal extraction, and refining and consolidation. Typical flow sheets adopted in some leading niobium-producing countries for the beneficiation of various niobium sources are presented, and various chemical processes for producing pure forms of niobium intermediates such as chloride, fluoride, and oxide are discussed. The book also explains how to liberate the metal from its intermediates and describes the physico-chemical principles involved. It is an excellent reference for chemical metallurgists, hydrometallurgists, extraction and process metallurgists, and minerals processors. It is also valuable to a wide variety of scientists, engineers, technologists, and students interested in the topic.

Download or read book ACS Style Guide written by Anne M. Coghill and published by American Chemical Society. This book was released on 2006 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the time since the second edition of The ACS Style Guide was published, the rapid growth of electronic communication has dramatically changed the scientific, technical, and medical (STM) publication world. This dynamic mode of dissemination is enabling scientists, engineers, and medicalpractitioners all over the world to obtain and transmit information quickly and easily. An essential constant in this changing environment is the requirement that information remain accurate, clear, unambiguous, and ethically sound.This extensive revision of The ACS Style Guide thoroughly examines electronic tools now available to assist STM writers in preparing manuscripts and communicating with publishers. Valuable updates include discussions of markup languages, citation of electronic sources, online submission ofmanuscripts, and preparation of figures, tables, and structures. In keeping current with the changing environment, this edition also contains references to many resources on the internet.With this wealth of new information, The ACS Style Guide's Third Edition continues its long tradition of providing invaluable insight on ethics in scientific communication, the editorial process, copyright, conventions in chemistry, grammar, punctuation, spelling, and writing style for any STMauthor, reviewer, or editor. The Third Edition is the definitive source for all information needed to write, review, submit, and edit scholarly and scientific manuscripts.

Download or read book Polymer Synthesis Theory and Practice written by Dietrich Braun and published by Springer Science & Business Media. This book was released on 2006-10-14 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first English edition of this book was pubUshed in 1971 with the late Prof. Dr. Werner Kern as coauthor. In 1997, for the preparation of the third edition, Prof. Dr. Helmut Ritter joined the team of authors and in 2001 Prof. Dr. Brigitte Voit and Prof. Dr. Matthias Rehahn complemented this team. The change in authors has not altered the basic concept of this 4th edition: again we were not aimed at compiling a comprehensive collection of recipes. In stead, we attempted to reach a broader description of the general methods and techniques for the synthesis, modification, and characterization of macromo- cules, supplemented by 105 selected and detailed experiments and by sufficient theoretical treatment so that no additional textbook be needed in order to under stand the experiments. In addition to the preparative aspects we have also tried to give the reader an impression of the relation of chemical structure and mor phology of polymers to their properties, as well as of areas of their application.

Download or read book Elements of Polymer Science Engineering written by Alfred Rudin and published by Elsevier. This book was released on 1998-09-21 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tremendous developments in the field of polymer science, its growing importance, and an increase in the number of polymer science courses in both physics and chemistry departments have led to the revision of the First Edition. This new edition addresses subjects as spectroscopy (NMR), dynamic light scattering, and other modern techniques unknown before the publication of the First Edition. The Second Edition focuses on both theory (physics and chemistry) and engineering applications which make it useful for chemistry, physics, and chemical engineering departments.

Download or read book Modification of Polymers written by Charles E. Carraher and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: The sheer volume of topics which could have been included under our general title prompted us to make some rather arbitrary decisions about content. Modification by irradiation is not included because the activity in this area is being treated elsewhere. We have chosen to emphasize chemical routes to modification and have striven to pre sent as balanced a representation of current activity as time and page count permit. Industrial applications, both real and potential, are included. Where appropriate, we have encouraged the contributors to include review material to help provide the reader with adequate context. The initial chapter is a review from a historical perspective of polymer modification and contains an extensive bibliography. The remainder of the book is divided into four general areas: Reactions and Preparation of Copolymers Reactions and Preparation of Block and Graft Copolymers Modification Through Condensation Reactions Applications The chemical modification of homopolymers such as polyvinylchlo ride, polyethylene, poly(chloroalkylene sulfides), polysulfones, poly chloromethylstyrene, polyisobutylene, polysodium acrylate, polyvinyl alcohol, polyvinyl chloroformate, sulfonated polystyrene; block and graft copolymers such as poly(styrene-block-ethylene-co-butylene block-styrene), poly(I,4-polybutadiene-block ethylene oxide), star chlorine-telechelic polyisobutylene, poly(isobutylene-co-2,3-dimethyl- 1,3-butadiene), poly(styrene-co-N-butylmethacrylate); cellulose, dex tran and inulin, is described.

Download or read book Clay Polymer Nanocomposites written by Khouloud Jlassi and published by Elsevier. This book was released on 2017-07-26 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clay–Polymer Nanocomposites is a complete summary of the existing knowledge on this topic, from the basic concepts of synthesis and design to their applications in timely topics such as high-performance composites, environment, and energy issues. This book covers many aspects of synthesis such as in- situ polymerization within the interlamellar spacing of the clays or by reaction of pristine or pre-modified clays with reactive polymers and prepolymers. Indeed, nanocomposites can be prepared at industrial scale by melt mixing. Regardless the synthesis method, much is said in this book about the importance of theclay pre-modification step, which is demonstrated to be effective, on many occasions, in obtaining exfoliated nanocomposites. Clay–Polymer Nanocomposites reports the background to numerous characterization methods including solid state NMR, neutron scattering, diffraction and vibrational techniques as well as surface analytical methods, namely XPS, inverse gas chromatography and nitrogen adsorption to probe surface composition, wetting and textural/structural properties. Although not described in dedicated chapters, numerous X-ray diffraction patterns of clay–polymer nanocomposites and reference materials are displayed to account for the effects of intercalation and exfoliations of layered aluminosilicates. Finally, multiscale molecular simulation protocols are presenting for predicting morphologies and properties of nanostructured polymer systems with industrial relevance. As far as applications are concerned, Clay–Polymer Nanocomposites examines structural composites such as clay–epoxy and clay–biopolymers, the use of clay–polymer nanocomposites as reactive nanocomposite fillers, catalytic clay-(conductive) polymers and similar nanocomposites for the uptake of hazardous compounds or for controlled drug release, antibacterial applications, energy storage, and more. - The most comprehensive coverage of the state of the art in clay–polymer nanocomposites, from synthesis and design to opportunities and applications - Covers the various methods of characterization of clay–polymer nanocomposites - including spectroscopy, thermal analyses, and X-ray diffraction - Includes a discussion of a range of application areas, including biomedicine, energy storage, biofouling resistance, and more

Download or read book Extrusion written by Harold F. Giles Jr and published by William Andrew. This book was released on 2013-09-21 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of Extrusion is designed to aid operators, engineers, and managers in extrusion processing in quickly answering practical day-to-day questions. The first part of the book provides the fundamental principles, for operators and engineers, of polymeric materials extrusion processing in single and twin screw extruders. The next section covers advanced topics including troubleshooting, auxiliary equipment, and coextrusion for operators, engineers, and managers. The final part provides applications case studies in key areas for engineers such as compounding, blown film, extrusion blow molding, coating, foam, and reprocessing. This practical guide to extrusion brings together both equipment and materials processing aspects. It covers basic and advanced topics, for reference and training, in thermoplastics processing in the extruder. Detailed reference data are provided on such important operating conditions as temperatures, start-up procedures, shear rates, pressure drops, and safety. - A practical guide to the selection, design and optimization of extrusion processes and equipment - Designed to improve production efficiency and product quality - Focuses on practical fault analysis and troubleshooting techniques

Download or read book Polymer layered Silicate Nanocomposites written by Masami Okamoto and published by iSmithers Rapra Publishing. This book was released on 2003 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: The review sets out to highlight the major developments in this field over the last decade. The different techniques used to prepare PLS nanocomposites are covered. The physicochemical characterisation of PLS nanocomposites and the improved materials properties that those materials can display are discussed. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database provides useful references for further reading.

Download or read book Biosynthetic Polymers for Medical Applications written by Laura Poole-Warren and published by Elsevier. This book was released on 2015-11-23 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biosynthetic Polymers for Medical Applications provides the latest information on biopolymers, the polymers that have been produced from living organisms and are biodegradable in nature. These advanced materials are becoming increasingly important for medical applications due to their favorable properties, such as degradability and biocompatibility. This important book provides readers with a thorough review of the fundamentals of biosynthetic polymers and their applications. Part One covers the fundamentals of biosynthetic polymers for medical applications, while Part Two explores biosynthetic polymer coatings and surface modification. Subsequent sections discuss biosynthetic polymers for tissue engineering applications and how to conduct polymers for medical applications. - Comprehensively covers all major medical applications of biosynthetic polymers - Provides an overview of non-degradable and biodegradable biosynthetic polymers and their medical uses - Presents a specific focus on coatings and surface modifications, biosynthetic hydrogels, particulate systems for gene and drug delivery, and conjugated conducting polymers

Download or read book Environmental Organic Chemistry written by René P. Schwarzenbach and published by John Wiley & Sons. This book was released on 2005-06-24 with total page 1329 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental Organic Chemistry focuses on environmental factors that govern the processes that determine the fate of organic chemicals in natural and engineered systems. The information discovered is then applied to quantitatively assessing the environmental behaviour of organic chemicals. Now in its 2nd edition this book takes a more holistic view on physical-chemical properties of organic compounds. It includes new topics that address aspects of gas/solid partitioning, bioaccumulation, and transformations in the atmosphere. Structures chapters into basic and sophisticated sections Contains illustrative examples, problems and case studies Examines the fundamental aspects of organic, physical and inorganic chemistry - applied to environmentally relevant problems Addresses problems and case studies in one volume

Download or read book Encyclopedic Dictionary of Polymers written by Jan W. Gooch and published by Springer Science & Business Media. This book was released on 2010-11-08 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference, in its second edition, contains more than 7,500 polymeric material terms, including the names of chemicals, processes, formulae, and analytical methods that are used frequently in the polymer and engineering fields. In view of the evolving partnership between physical and life sciences, this title includes an appendix of biochemical and microbiological terms (thus offering previously unpublished material, distinct from all competitors.) Each succinct entry offers a broadly accessible definition as well as cross-references to related terms. Where appropriate to enhance clarity further, the volume's definitions may also offer equations, chemical structures, and other figures. The new interactive software facilitates easy access to a large database of chemical structures (2D/3D-view), audio files for pronunciation, polymer science equations and many more.