Download or read book An Experimental Study of Swirling Flows as Applied to Annular Combustors written by and published by . This book was released on 1997 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Oata Analysis and Synthesis (CINOAS) * at Purdue. University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna tional publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 33 (thesis year 1988) a total of 13,273 theses titles from 23 Canadian and 1 85 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work. While Volume 33 reports theses submitted in 1988, on occasion, certain univer sities do report theses submitted in previous years but not reported at the time.
Download or read book One Small Step written by Alten F. Grandt and published by Purdue University Press. This book was released on 2010 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Purdue University has played a leading role in providing the engineers who designed, built, tested, and flew the many aircraft and spacecraft that so changed human progress during the 20th century. It is estimated that Purdue has awarded 6% of all BS degrees in aerospace engineering, and 7% of all PhDs in the United States during the past 65 years. The University's alumni have led significant advances in research and development of aerospace technology, have headed major aerospace corporations and government agencies, and have established an amazing record for exploration of space. More than one third of all US manned space flights have had at least one crew member who was a Purdue engineering graduate (including the first and last men to step foot on the moon). The School of Aeronautics & Astronautics was founded as a separate school within the College of Engineering at Purdue University in 1945. The first edition of this book was published in 1995, at the time of the school's 50th anniversary. This corrected and expanded second edition brings the school's illustrious history up to date, and looks to Purdue's future in the sky and in space.
Download or read book Unsteady Combustor Physics written by Tim C. Lieuwen and published by Cambridge University Press. This book was released on 2012-08-27 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developing clean, sustainable energy systems is a pre-eminent issue of our time. Most projections indicate that combustion-based energy conversion systems will continue to be the predominant approach for the majority of our energy usage. Unsteady combustor issues present the key challenge associated with the development of clean, high-efficiency combustion systems such as those used for power generation, heating or propulsion applications. This comprehensive study is unique, treating the subject in a systematic manner. Although this book focuses on unsteady combusting flows, it places particular emphasis on the system dynamics that occur at the intersection of the combustion, fluid mechanics and acoustic disciplines. Individuals with a background in fluid mechanics and combustion will find this book to be an incomparable study that synthesises these fields into a coherent understanding of the intrinsically unsteady processes in combustors.
Download or read book Coarse Grained Simulation and Turbulent Mixing written by Fenando F. Grinstein and published by Cambridge University Press. This book was released on 2016-06-30 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reviews our current understanding of the subject. For graduate students and researchers in computational fluid dynamics and turbulence.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Swirl Flows written by Ashwani K. Gupta and published by Routledge. This book was released on 1984 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Boilers and Burners written by Prabir Basu and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: A joint effort of three continents, this book is about rational utilization of the fossil fuels for generation of heat or power. It provides a synthesis of two scientific traditions: the high-performance, but often proprietary, Western designs, and the elaborate national standards based on less advanced Eastern designs; it presents both in the same Western format. It is intended for engineers and advanced undergraduate and graduate students with an interest in steam power plants, burners, or furnaces. The text uses a format of practice based on theory: each chapter begins with an explanation of a process, with basic theory developed from first principles; then empirical relationships are presented and, finally, design methods are explained by worked out examples. It will thus provide researchers with a resource for applications of theory to practice. Plant operators will find solutions to and explanations of many of their daily operational problems. Designers will find this book ready with required data, design methods and equations. Finally, consultants will find it very useful for design evaluation.
Download or read book Advances in Chemical Propulsion written by Gabriel D. Roy and published by CRC Press. This book was released on 2001-10-25 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by the scientists who performed the research, this book reports on the progress achieved by the outstanding team of researchers participating in the ONR Propulsion Program. It covers all aspects of the combustion process, from chemical synthesis, reaction pathways of the fuel, and combustor performance to the reduction of emissions, thrust vectoring, and control. The chapter authors discuss the relevant issues, describe their approach and results, and explain how the findings can be extended to practical applications. Richly illustrated and carefully edited for clarity, uniformity, and readability, this book offers a comprehensive survey of the field, from pre- to post-combustion.
Download or read book Fossil Energy Update written by and published by . This book was released on 1978 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1977 with total page 892 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1990 with total page 1044 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aeronautical Engineering written by and published by . This book was released on 1991 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lateral jet injection into typical combustor flowfields written by David G. Lilley and published by DIANE Publishing. This book was released on 1986 with total page 97 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Innovative Design Analysis and Development Practices in Aerospace and Automotive Engineering written by Nicolas Gascoin and published by Springer Nature. This book was released on 2020-09-26 with total page 571 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the best articles presented by researchers and industrial experts at the International Conference on “Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2020)”. The papers discuss new design concepts, and analysis and manufacturing technologies, with a focus on achieving improved performance by downsizing; improving the strength-to-weight ratio, fuel efficiency and operational capability at room and elevated temperatures; reducing wear and tear; addressing NVH aspects, while balancing the challenges of Euro VI/Bharat Stage VI emission norms, greenhouse effects and recyclable materials. Presenting innovative methods, this book is a valuable reference resource for professionals at educational and research organizations, as well as in industry, encouraging them to pursue challenging projects of mutual interest.
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 974 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Thermoacoustic Combustion Instability Control written by Dan Zhao and published by Academic Press. This book was released on 2023-02-13 with total page 1145 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoacoustic Combustion Instability Control: Engineering Applications and Computer Codes provides a unique opportunity for researchers, students and engineers to access recent developments from technical, theoretical and engineering perspectives. The book is a compendium of the most recent advances in theoretical and computational modeling and the thermoacoustic instability phenomena associated with multi-dimensional computing methods and recent developments in signal-processing techniques. These include, but are not restricted to a real-time observer, proper orthogonal decomposition (POD), dynamic mode decomposition, Galerkin expansion, empirical mode decomposition, the Lattice Boltzmann method, and associated numerical and analytical approaches. The fundamental physics of thermoacoustic instability occurs in both macro- and micro-scale combustors. Practical methods for alleviating common problems are presented in the book with an analytical approach to arm readers with the tools they need to apply in their own industrial or research setting. Readers will benefit from practicing the worked examples and the training provided on computer coding for combustion technology to achieve useful results and simulations that advance their knowledge and research. - Focuses on applications of theoretical and numerical modes with computer codes relevant to combustion technology - Includes the most recent modeling and analytical developments motivated by empirical experimental observations in a highly visual way - Provides self-contained chapters that include a comprehensive, introductory section that ensures any readers new to this topic are equipped with required technical terms
