Download or read book Modelling Diesel Combustion written by P. A. Lakshminarayanan and published by Springer Science & Business Media. This book was released on 2010-03-03 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phenomenology of Diesel Combustion and Modeling Diesel is the most efficient combustion engine today and it plays an important role in transport of goods and passengers on land and on high seas. The emissions must be controlled as stipulated by the society without sacrificing the legendary fuel economy of the diesel engines. These important drivers caused innovations in diesel engineering like re-entrant combustion chambers in the piston, lower swirl support and high pressure injection, in turn reducing the ignition delay and hence the nitric oxides. The limits on emissions are being continually reduced. The- fore, the required accuracy of the models to predict the emissions and efficiency of the engines is high. The phenomenological combustion models based on physical and chemical description of the processes in the engine are practical to describe diesel engine combustion and to carry out parametric studies. This is because the injection process, which can be relatively well predicted, has the dominant effect on mixture formation and subsequent course of combustion. The need for improving these models by incorporating new developments in engine designs is explained in Chapter 2. With “model based control programs” used in the Electronic Control Units of the engines, phenomenological models are assuming more importance now because the detailed CFD based models are too slow to be handled by the Electronic Control Units. Experimental work is necessary to develop the basic understanding of the pr- esses.

Download or read book Oxygen Enhanced Combustion written by Charles E. Baukal, Jr. and published by CRC Press. This book was released on 2010-12-12 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Combustion technology has traditionally been dominated by air/fuel combustion. However, two developments have increased the significance of oxygen-enhanced combustion - new technology producing oxygen less expensively and the increased importance of environmental regulations. Advantages of oxygen-enhanced combustion include numerous environmental benefits as well as increased energy efficiency and productivity. The text compiles information about using oxygen to enhance high temperature industrial heating and melting processes - serving as a unique resource for specialists implementing the use of oxygen in combustion systems; combustion equipment and industrial gas suppliers; researchers; funding agencies for advanced combustion technologies; and agencies developing regulations for safe, efficient, and environmentally friendly combustion systems. Oxygen-Enhanced Combustion: Examines the fundamentals of using oxygen in combustion, pollutant emissions, oxygen production, and heat transfer Describes ferrous and nonferrous metals, glass, and incineration Discusses equipment, safety, design, and fuels Assesses recent trends including stricter environmental regulations, lower-cost methods of producing oxygen, improved burner designs, and increasing fuel costs Emphasizing applications and basic principles, this book will act as the primary resource for mechanical, chemical, aerospace, and environmental engineers and scientists; physical chemists; fuel technologists; fluid dynamists; and combustion design engineers. Topics include: General benefits Economics Potential problems Pollutant emissions Oxygen production Adsorption Air separation Heat transfer Ferrous metals Melting and refining processes Nonferrous metals Minerals Glass furnaces Incineration Safety Handling and storage Equipment design Flow controls Fuels

Download or read book Flue Gas and Fly Ash written by P.F. Sens and published by CRC Press. This book was released on 2003-09-02 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of a contractors' meeting organized by the Commission of the European Communities, Directorate-General XII for Science, Research and Development, held in Brussels, Belgium, 16 June 1988.

Download or read book Dust Explosion Dynamics written by Russell A. Ogle and published by Butterworth-Heinemann. This book was released on 2016-09-10 with total page 687 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dust Explosion Dynamics focuses on the combustion science that governs the behavior of the three primary hazards of combustible dust: dust explosions, flash fires, and smoldering. It explores the use of fundamental principles to evaluate the magnitude of combustible dust hazards in a variety of settings. Models are developed to describe dust combustion phenomena using the principles of thermodynamics, transport phenomena, and chemical kinetics. Simple, tractable models are described first and compared with experimental data, followed by more sophisticated models to help with future challenges. Dr. Ogle introduces the reader to just enough combustion science so that they may read, interpret, and use the scientific literature published on combustible dusts. This introductory text is intended to be a practical guide to the application of combustible dust models, suitable for both students and experienced engineers. It will help you to describe the dynamics of explosions and fires involving dust and evaluate their consequences which in turn will help you prevent damage to property, injury and loss of life from combustible dust accidents. - Demonstrates how the fundamental principles of combustion science can be applied to understand the ignition, propagation, and extinction of dust explosions - Explores fundamental concepts through model-building and comparisons with empirical data - Provides detailed examples to give a thorough insight into the hazards of combustible dust as well as an introduction to relevant scientific literature

Download or read book Proceedings written by and published by . This book was released on 1970 with total page 1532 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Technical Note written by and published by . This book was released on 1957 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book On the Ignition and Combustion of Fuel Droplets and the Ignition of Premixed Fuels by Hot Cylindrical Surfaces written by Roger H. Rangel and published by . This book was released on 1985 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1994 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Canadian Journal of Chemical Engineering written by and published by . This book was released on 1989-02 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fossil Energy Update written by and published by . This book was released on 1978 with total page 944 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Technical Note National Advisory Committee for Aeronautics written by United States. National Advisory Committee for Aeronautics and published by . This book was released on 1957 with total page 992 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy Research Abstracts written by and published by . This book was released on 1978 with total page 1004 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sodium Fast Reactors with Closed Fuel Cycle written by Baldev Raj and published by CRC Press. This book was released on 2015-04-15 with total page 901 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sodium Fast Reactors with Closed Fuel Cycle delivers a detailed discussion of an important technology that is being harnessed for commercial energy production in many parts of the world. Presenting the state of the art of sodium-cooled fast reactors with closed fuel cycles, this book:Offers in-depth coverage of reactor physics, materials, design, s

Download or read book The Second International Microgravity Combustion Workshop written by and published by . This book was released on 1993 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in IC Engines and Combustion Technology written by Ashwani K. Gupta and published by Springer Nature. This book was released on 2020-08-18 with total page 939 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select peer-reviewed proceedings of the 26th National Conference on IC Engines and Combustion (NCICEC) 2019 which was organised by the Department of Mechanical Engineering, National Institute of Technology Kurukshetra under the aegis of The Combustion Institute-Indian Section (CIIS). The book covers latest research and developments in the areas of combustion and propulsion, exhaust emissions, gas turbines, hybrid vehicles, IC engines, and alternative fuels. The contents include theoretical and numerical tools applied to a wide range of combustion problems, and also discusses their applications. This book can be a good reference for engineers, educators and researchers working in the area of IC engines and combustion.

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1974 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book High Energy Density Fuels for Advanced Propulsion written by Ji-Jun Zou and published by John Wiley & Sons. This book was released on 2020-05-27 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively and systematically demonstrates the theory and practice of designing, synthesizing and improving the performance of fuels. The contents range from polycyoalkane fuels, strained fuels, alky-diamondoid fuels, hypergolic and nanofluid fuels derived from fossil and biomass. All the chapters together clearly describe the important aspects of high-energy-density fuels including molecular design, synthesis route, physiochemical properties, and their application in improving the aerocraft performance. Vivid schematics and illustrations throughout the book enhance the accessibility to the relevant theory and technologies. This book provides the readers with fundamentals on high-energy-density fuels and their potential in advanced aerospace propulsion, and also provides the readers with inspiration for new development of advanced aerospace fuels.