Download or read book An Experimental Investigation of the Influence of the Lubricant Viscosity and Additives on Gear Wear written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-06-24 with total page 26 pages. Available in PDF, EPUB and Kindle. Book excerpt: The influence of lubricant viscosity and additives on the average wear rate of spur gear pairs was investigated experimentally. The gear specimens of a comprehensive gear durability test program that made use of seven lubricants covering a range of viscosities were examined to measure gear tooth wear. The measured wear was related to the as-manufactured surface roughness, the elastohydrodynamic film thickness, and the experimentally determined contact fatigue lives of the same specimens. In general, the wear rate was found to be inversely proportional to the viscosity of the lubricant and to the lambda ratio (also sometimes called the specific film thickness). The data also show an exponential trend between the average wear rates and the surface fatigue lives. Lubricants with similar viscosities but differing additives and compositions had somewhat differing gear surface fatigue lives and wear rates. Krantz, Timothy L. and Kahraman, Ahmet Glenn Research Center NASA/TM-2005-213956, ARL-TR-3126, E-15272

Download or read book An Experimental Investigation of the Influence of the Lubricant Viscosity and Additives on Gear Wear written by Timothy L. Krantz and published by . This book was released on 2005 with total page 18 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book An Experimental Investigation of the Influence of the Lubricant Viscosity and Additives on Gear Wear written by Timothy L. Krantz and published by BiblioGov. This book was released on 2013-07 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: The influence of lubricant viscosity and additives on the average wear rate of spur gear pairs was investigated experimentally. The gear specimens of a comprehensive gear durability test program that made use of seven lubricants covering a range of viscosities were examined to measure gear tooth wear. The measured wear was related to the as-manufactured surface roughness, the elastohydrodynamic film thickness, and the experimentally determined contact fatigue lives of the same specimens. In general, the wear rate was found to be inversely proportional to the viscosity of the lubricant and to the lambda ratio (also sometimes called the specific film thickness). The data also show an exponential trend between the average wear rates and the surface fatigue lives. Lubricants with similar viscosities but differing additives and compositions had somewhat differing gear surface fatigue lives and wear rates.

Download or read book Tribology and Surface Engineering written by Aleksander Lisiecki and published by MDPI. This book was released on 2020-01-15 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers very important issues, not only scientific in nature but, ultimately, for industry and the economy. Wear and deterioration of surface properties during operation is a natural and unavoidable phenomenon. However, minimizing the degree of wear is of great importance for the entire economy, as illustrated by the example of the US economy, for which the loss of natural resources as a direct cause of friction and wear exceeds 6% of the Gross National Product. This book showcases the valuable knowledge revealed from both theoretical and practical research results in the field of advanced technologies of coatings and surface modification, as well as wear and tribological characteristics of advanced materials and surface layers. Therefore, it is hoped that this book will be a valuable resource and helpful tool for scientists, engineers, and students in the field of surface engineering, materials science, and manufacturing engineering.

Download or read book Modeling and Analytical Methods in Tribology written by Ilya I. Kudish and published by CRC Press. This book was released on 2010-07-20 with total page 928 pages. Available in PDF, EPUB and Kindle. Book excerpt: Improving our understanding of friction, lubrication, and fatigue, Modeling and Analytical Methods in Tribology presents a fresh approach to tribology that links advances in applied mathematics with fundamental problems in tribology related to contact elasticity, fracture mechanics, and fluid film lubrication. The authors incorporate the classical tenets of tribology while providing new mathematical solutions that address various shortcomings in existing theories. From contact interactions to contact fatigue life, the book connects traditionally separate areas of tribology research to create a coherent modeling methodology that encompasses asymptotic and numerical techniques. The authors often demonstrate the efficacy of the models by comparing predictions to experimental data. In most cases, they derive equations from first principles. They also rigorously prove problem formulations and derive certain solution properties. Solutions to problems are presented using simple analytical formulas, graphs, and tables. In addition, the end-of-chapter exercises highlight points important for comprehending the material and mastering the appropriate skills. Unlocking the secrets that govern the physics of lubricated and dry contacts, this book helps tribologists on their quest to reduce friction, minimize wear, and extend the operating life of mechanical equipment. It provides a real-world industrial perspective so that readers can attain a practical understanding of the material.

Download or read book Advances in Engine Tribology written by Vikram Kumar and published by Springer Nature. This book was released on 2021-12-09 with total page 261 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is focuses on novel materials for advanced engine design. It includes the study of friction, wear, lubrication, suitable lubricant additives, and durability of different engine components of alcohol/biodiesel fueled engines. The contents highlight different lubrication systems to overcome friction and wear problems of automotive transportation systems. It also discusses different materials for future applications, wear of wheels and axels of locomotives, friction-induced noise and vibration and tribological behavior of texture surfaces in the automotive transport sector. This book will be of interest to those in academia and industry involved in alternative fuels application in IC engines, friction and wear study of various engine components, lubrication approaches and different additives of lubricants, and novel materials for advanced engine design.

Download or read book Wheel Rail Interface Handbook written by R. Lewis and published by Elsevier. This book was released on 2009-09-25 with total page 865 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many of the engineering problems of particular importance to railways arise at interfaces and the safety-critical role of the wheel/rail interface is widely acknowledged. Better understanding of wheel/rail interfaces is therefore critical to improving the capacity, reliability and safety of the railway system.Wheel-rail interface handbook is a one-stop reference for railway engineering practitioners and academic researchers. Part one provides the fundamentals of contact mechanics, wear, fatigue and lubrication as well as state-of-the-art research and emerging technologies related to the wheel/rail interface and its management. Part two offers an overview of industrial practice from several different regions of the world, thereby providing an invaluable international perspective with practitioners' experience of managing the wheel/rail interface in a variety of environments and circumstances.This comprehensive volume will enable practising railway engineers, in whatever discipline of railway engineering – infrastructure, vehicle design and safety, and so on – to enhance their understanding of wheel/rail issues, which have a major influence on the running of a reliable, efficient and safe railway. - One-stop reference on the important topic of wheel rail-interfaces - Presents the fundamentals of contact mechanics, wear, fatigue and lubrication - Examines state-of-the-art research and emerging technologies related to wheel-rail interface and its management

Download or read book Elastohydrodynamic Lubrication for Line and Point Contacts written by Ilya I. Kudish and published by CRC Press. This book was released on 2013-06-17 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: Elastohydrodynamic Lubrication for Line and Point Contacts: Asymptotic and Numerical Approaches describes a coherent asymptotic approach to the analysis of lubrication problems for heavily loaded line and point contacts. This approach leads to unified asymptotic equations for line and point contacts as well as stable numerical algorithms for the solution of these elastohydrodynamic lubrication (EHL) problems. A Unique Approach to Analyzing Lubrication Problems for Heavily Loaded Line and Point Contacts The book presents a robust combination of asymptotic and numerical techniques to solve EHL problems for lightly and heavily loaded line and point contacts. It also proposes a reasonably simple and naturally based regularization approach that produces stable solutions in heavily loaded EHL contacts. The book offers a clear understanding of the processes taking place in heavily loaded line and point EHL contacts as well as of the proper solution structure for EHL problems. It outlines concrete ways to determine important design parameters such as lubrication film thickness and frictional stresses and forces. The book establishes a close link between EHL problems for heavily loaded point and line contacts. Fine Tune Your Methods for Solving Elastohydrodynamic Lubrication Problems In most cases, the equations in the book are derived from first principles. The author describes each of the asymptotic and numerical methods in detail, making it easier for readers to apply them to various problems. The problem solutions are presented in the form of simple analytical formulas, graphs, and tables. Almost all the chapters include exercises that highlight key points and skills. Suitable for engineering and applied mathematics students, this is also a unique resource for researchers and practitioners who want to fine tune their solution methods and design better numerical methods to tackle elastohydrodynamic lubrication problems.

Download or read book Journal of Tribology written by and published by . This book was released on 2004 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nanolubricants written by Jean Michel Martin and published by John Wiley & Sons. This book was released on 2008-04-30 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: The technology involved in lubrication by nanoparticles is a rapidly developing scientific area and one that has been watched with interest for the past ten years. Nanolubrication offers a solution to many problems associated with traditional lubricants that contain sulphur and phosphorus; and though for some time the production of nanoparticles was restricted by the technologies available, today synthesis methods have been improved to such a level that it is possible to produce large quantities relatively cheaply and efficiently. Nanolubricants develops a new concept of lubrication, based on these nanoparticles, and along with the authors’ own research it synthesises the information available on the topic of nanolubrication from existing literature and presents it in a concise form. Describes the many advantages and potential applications of nanotechnology in the tribological field. Offers a full review of the state-of-the-art as well as much original research that is yet unpublished. Includes sections on boundary lubrication by colloïdal systems, nanolubricants made of metal dichalcogenides, carbon-based nanolubricants, overbased detergent salts, nanolubricants made of metals and boron-based solid nanolubricants and lubrication additives. Authored by highly regarded experts in the field with contributions from leading international academics. Nanolubricants will appeal to postgraduate students, academics and researchers in mechanical engineering, chemical engineering and materials science. It should also be of interest to practising engineers with petroleum companies and mechanical manufacturers.

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1970 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Fuels and Lubricants Handbook written by and published by . This book was released on 2003 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Journal of Basic Engineering written by and published by . This book was released on 1966 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Synthetics Mineral Oils and Bio Based Lubricants written by Leslie R. Rudnick and published by CRC Press. This book was released on 2005-12-22 with total page 947 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the field of tribology has evolved, the lubrication industry is also progressing at an extraordinary rate. Updating the author's bestselling publication, Synthetic Lubricants and High-Performance Functional Fluids, this book features the contributions of over 60 specialists, ten new chapters, and a new title to reflect the evolving nature of the

Download or read book Lubrication of Gearing written by Wilfried J. Bartz and published by Wiley-Blackwell. This book was released on 1993 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances have been made in the theoretical treatment of gear lubrication but successful operation of gear sets remains highly dependent on empirical knowledge. This book contains the latest information on this subject, drawn from research studies and practical experience.

Download or read book Materials Research for Lubricants and Heat Transfer Fluids written by Karl R. Mecklenburg and published by . This book was released on 1961 with total page 52 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Hydrodynamic Effect of Lubricant with Reverse Extrusion written by N. A. Koryakin and published by . This book was released on 1972 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: It was established on the basis of an experimental investigation of the effect of viscous lubricants on metal flow in the reverse squeezing, that closing of continuous lubricant layer above the punch, due to the hydrdynamic effect of the lubricant and to continuous lubricant displacement and expenditure in squeezing, sharply reduces the contact friction and specific pressure. It also equalizes deformations and improves the durability of dies. (Author).