Download or read book Investigation of Synthetic Jets Heat Transfer and Flow Field written by Carlo Salvatore Greco and published by Youcanprint. This book was released on 2015-04-30 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: Synthetic jets are devices able to “synthetize” a jet from the ambient in which they are embedded through a simple membrane oscillation inside a cavity with an orifice. Such features make them high reliable, silent and easy to be miniaturized. For these reasons, they are widely investigated as electronic cooling devices. The present research is focused on the design and analysis of a different type of synthetic jet device compared to its single classical configuration. Such a device his experimentally characterized through the study of its free and impinging flow field and the evaluation of its heat transfer performance.
Download or read book Turbulent Jets written by N. Rajaratnam and published by Elsevier. This book was released on 1976-01-01 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Turbulent Jets
Download or read book Encyclopedia Of Two phase Heat Transfer And Flow Iii Macro And Micro Flow Boiling And Numerical Modeling Fundamentals A 4 volume Set written by John R Thome and published by World Scientific. This book was released on 2018-03-13 with total page 1460 pages. Available in PDF, EPUB and Kindle. Book excerpt: Set III of this encyclopedia is a new addition to the previous Sets I and II. It contains 26 invited chapters from international specialists on the topics of numerical modeling of two-phase flows and evaporation, fundamentals of evaporation and condensation in microchannels and macrochannels, development and testing of micro two-phase cooling systems for electronics, and various special topics (surface wetting effects, microfin tubes, two-phase flow vibration across tube bundles). The chapters are written both by renowned university researchers and by well-known engineers from leading corporate research laboratories. Numerous 'must read' chapters cover the fundamentals of research and engineering practice on boiling, condensation and two-phase flows, two-phase heat transfer equipment, electronics cooling systems, case studies and so forth. Set III constitutes a 'must have' reference together with Sets I and II for thermal engineering researchers and practitioners.
Download or read book Advances in Heat Transfer written by Ephraim M. Sparrow and published by Academic Press. This book was released on 2018-11-07 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Heat Transfer, Volume 50, provides in-depth review articles from a broader scope than in traditional journals or texts, with this comprehensive release covering chapters on Heat Transfer in Rotating Channels, Advances in Liquid Metal Science and Technology in Chip Cooling and Thermal Management, Heat Transfer in Rotating Cooling Channel, Anomalous Heat Transfer: Examples, Fundamentals, and Fractional Calculus Models, and much more. - Fills the information gap between regularly scheduled journals and university-level textbooks by providing in-depth review articles over a broader scope than in traditional journals or texts - Essential reading for all mechanical, chemical and industrial engineers working in the field of heat transfer, or in graduate schools or industry
Download or read book Proceedings of the 4th International Conference on Nanochannels Microchannels and Minichannels 2006 written by and published by . This book was released on 2006 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied mechanics reviews written by and published by . This book was released on 1948 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1989 with total page 1134 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat and Mass Transfer written by Alekseĭ Vasilʹevich Lykov and published by . This book was released on 1967 with total page 1242 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 5th Electronics Packaging Technology Conference written by Mahadevan K. Iyer and published by IEEE Computer Society Press. This book was released on 2003 with total page 854 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Doppler and Phase Doppler Measurement Techniques written by H.-E. Albrecht and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 741 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing the first comprehensive treatment, this book covers all aspects of the laser Doppler and phase Doppler measurement techniques, including light scattering from small particles, fundamental optics, system design, signal and data processing, tracer particle generation, and applications in single and two-phase flows. The book is intended as both a reference book for more experienced users as well as an instructional book for students. It provides ample material as a basis for a lecture course on the subject and represents one of the most comprehensive treatments of the phase Doppler technique to date. The book will serve as a valuable reference book in any fluid mechanics laboratory where the laser Doppler or phase Doppler techniques are used. This work reflects the authors' long practical experience in the development of the techniques and equipment, as the many examples confirm.
Download or read book Nanofluids written by Mohammad Mehdi Rashidi and published by Elsevier. This book was released on 2024-07-17 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanofluids are a new class of heat transfer fluids engineered by dispersing and stably suspending nanoparticles in traditional heat transfer fluids. Recently they have obtained global attention from the scientific community owing to their unique properties and significant applications in different engineering fields. Nanofluids: Preparation, Applications and Simulation Methods provides a comprehensive review of recent advances in this important research field. Different approaches for preparing some remarkable families of nanofluids such as aluminum oxide-based nanofluids, CuO/Cu-based nanofluids, carbon nanotubes/graphene-based nanofluids, ZnO-based nanofluids, Fe3O4-based nanofluids, and SiO2-based nanofluids are discussed in detail as well as their current and potential applications. Different approaches for numerical, semi-analytical and analytical simulations are also discussed including molecular dynamics, the Lattice Boltzmann method, and spectral methods, as well as advanced analytical techniques such as the Differential Transform Method, the Homotopy Analysis Method, and Optimal Homotopy Analysis. The book will be a valuable reference resource for academic and industrial researchers, materials scientists and engineers, nanotechnologists, and chemists working in the development of nanomaterials and nanofluids for heat transfer in energy and engineering applications. - Covers the synthesis of nanostructures, preparation of nanofluids, different applications and proposed models for fluid mechanics and heat transfer - Presents recent advances on preparation methods, including green chemistry-based methods for preparation of nanomaterials and nanofluids - Includes novel model-based approaches such as molecular dynamics and Lattice Boltzmann methods - Delves into applications in renewable energy technologies and thermal management - Contains a Semi-analytical approach for solving Time-Fractional Navier-Stokes Equation
Download or read book Closure Strategies for Turbulent and Transitional Flows written by Brian Edward Launder and published by Cambridge University Press. This book was released on 2002-02-21 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publisher Description
Download or read book Proceedings of the National Heat Transfer Conference written by and published by . This book was released on 1997 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Large Eddy Simulation for Compressible Flows written by Eric Garnier and published by Springer Science & Business Media. This book was released on 2009-08-11 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses both the fundamentals and the practical industrial applications of Large Eddy Simulation (LES) in order to bridge the gap between LES research and the growing need to use it in engineering modeling.
Download or read book Journal of Hydrodynamics written by and published by . This book was released on 2005 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Heat Transfer written by Aziz Belmiloudi and published by BoD – Books on Demand. This book was released on 2011-02-14 with total page 658 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past few decades there has been a prolific increase in research and development in area of heat transfer, heat exchangers and their associated technologies. This book is a collection of current research in the above mentioned areas and describes modelling, numerical methods, simulation and information technology with modern ideas and methods to analyse and enhance heat transfer for single and multiphase systems. The topics considered include various basic concepts of heat transfer, the fundamental modes of heat transfer (namely conduction, convection and radiation), thermophysical properties, computational methodologies, control, stabilization and optimization problems, condensation, boiling and freezing, with many real-world problems and important modern applications. The book is divided in four sections : "Inverse, Stabilization and Optimization Problems", "Numerical Methods and Calculations", "Heat Transfer in Mini/Micro Systems", "Energy Transfer and Solid Materials", and each section discusses various issues, methods and applications in accordance with the subjects. The combination of fundamental approach with many important practical applications of current interest will make this book of interest to researchers, scientists, engineers and graduate students in many disciplines, who make use of mathematical modelling, inverse problems, implementation of recently developed numerical methods in this multidisciplinary field as well as to experimental and theoretical researchers in the field of heat and mass transfer.
Download or read book Paper written by and published by . This book was released on 2000 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:
